- revised CV programming especially writing
- Core 1 is only started when valid package with correct address is received
- Extended addresses are now correctly verified and implemented
- Base PWM measurement is now done on core0 and checked for automatically in cv_setup_check()
- Moved Motor PWM, GPIO, ADC to core0
- Implemented inverted direction mode (CV_29) according to DCC-Standards
- Limited feed-forward parameters y_2 to max_output/y_1
- k_p gain slopes are now calculated on initialization
- k_p gain parameters are also in pid parameter struct now
- Revised init_pid()
- Implemented Packet timeout check (CV_11)
- 16Bit and 32Bit CVs now always have the highest bytes as the lowest array index to accommodate get_XXbit_CV() functions
- Updates in speed steps are passed via multicore fifo.
- Pointer to direction variable is also passed from core1 to core0 via multicore fifo
- PID parameter struct definition moved to core1.h
- Implemented variable Proportional gain function
- Implemented function to determine base pwm level
- Minor changes regarding variable names
- Added more comments to roughly describe functionality of functions
- changed pid params and variables in measure() from float to integers
- implemented Motor PWM Frequency CV
- improved acknowledge() function ( 3ms forward / 3ms reverse )
- moved automatic offset setup to speed step evaluation
- removed zener diode correction
- some minor changes regarding naming of constants
- several changes to pid_control and speed_helper
- measurements are now being "filtered" (x smallest and y biggest values will be discarded to counteract noisy measurements)
- irq priority for core1 adjusted (pid_control irq now has highest priority)