more debug output

This commit is contained in:
questor/Inter committed 2023-04-27 23:07:19 +02:00
1 parent a0408c28ed
commit 23b69d6823
2 files changed
+16 -8

No files matched your search

+2 -2
View File
@@ -203,8 +203,8 @@ uint8_t CV_ARRAY_DEFAULT [CV_ARRAY_SIZE] = {
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//Offset adjustment for ADC //
//If CV_172 = 0xFF = 255 there will be a measurement procedure on startup //
0b11111111, //CV_172 - ADC offset Default: 255 //
0b01111111, //CV_173 - ADC offset measurement cycles Default: 127 //
0b11111111, //CV_172 - ADC offset Default: 255 (triggers new measurement!) //
0b01111111, //CV_173 - ADC offset measurement cycles Default: 127 //
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
0b00000001, //CV_174 - Additional motor-PWM clock divider.
0b00000111, //CV_175 - speed_helper timer delay - can be used to adjust accel/decel rate
+14 -6
View File
@@ -79,6 +79,8 @@ void adc_offset_adjustment(uint32_t n){
float overall_avg = (offset_avg_fwd+offset_avg_rev)/2;
uint8_t offset = (uint8_t)roundf(overall_avg);
LOG(1, "new adc offset CV[171] (%f): (uint8_t)%d\n", overall_avg, offset);
// Create temporary array -> change CV 172 in temp array -> erase flash -> write temp array to flash
uint8_t CV_ARRAY_TEMP[CV_ARRAY_SIZE];
memcpy(CV_ARRAY_TEMP, CV_ARRAY_FLASH, sizeof(CV_ARRAY_TEMP));
@@ -550,14 +552,18 @@ uint16_t measure_base_pwm(bool direction, uint8_t iterations){
CV_ARRAY_FLASH[63],
direction);
// Abort measurement and write default value of 0 to flash
if (level > max_level) return 0;
}
while((measurement - (float)CV_ARRAY_FLASH[171]) < 5.0f);
if (level > max_level) {
LOG(1, "measure_base_pwm: abort measurement and return 0\n");
return 0;
}
} while((measurement - (float)CV_ARRAY_FLASH[171]) < 5.0f);
level_arr[i] = (float)level;
busy_wait_ms(100);
}
// Find and return overall average discarding outliers in measurement - multiply with 0.9
return (uint16_t)(0.9f*two_std_dev(level_arr,5));
float retVal = 0.9f*two_std_dev(level_arr,5);
printf("measure_base_pwm: %d(%f)\n", (uint16_t)retVal, retVal);
return (uint16_t)(retVal);
}
@@ -566,7 +572,7 @@ uint16_t measure_base_pwm(bool direction, uint8_t iterations){
// When ADC Setup is not configured run adc offset adjustment function and write adc offset into flash
void cv_setup_check(){
// Check for flash factory setting and set CV_FLASH_ARRAY to default values when factory condition ("0xFF") is found.
if ( CV_ARRAY_FLASH[64] == 0xFF ){
if ( CV_ARRAY_FLASH[64] == 0xFF ){
LOG(1, "found cv[64] equals to 0xff, reseting CVs (and CV[8] = 8)\n");
uint8_t arr[4] = {125,8,7,124};
program_mode(4,arr); //reset to CV_ARRAY_DEFAULT (write CV_8 = 8)
@@ -574,7 +580,7 @@ void cv_setup_check(){
// Check for adc offset setup
if ( CV_ARRAY_FLASH[171] == 0xFF ){
LOG(1, "found cv[171] equals to 0xff, adc offset adjustments (and cr[8] = 8)\n");
LOG(1, "found cv[171] equals to 0xff, adc offset adjstments (and cr[7] = 7)\n");
uint8_t arr[4] = {125,7,6,124};
program_mode(4,arr); //ADC offset adjustment (write CV_7 = 7)
}
@@ -602,6 +608,8 @@ void cv_setup_check(){
uint8_t arr1[4] = {125,base_pwm_rev_low_byte,178,124};
program_mode(4,arr1);
}
LOG(1, "int_lim_max %f\n", 10*(float)CV_ARRAY_FLASH[51]);
LOG(1, "int_lim_min %f\n", -10*(float)CV_ARRAY_FLASH[52]);
}