Removede FIFO Irq, Addded function for measuring and controlling motor speed

This commit is contained in:
GabrielKoppenstein committed 2021-09-19 10:17:45 +02:00
1 parent 1994f194ae
commit fc639b765e
4 files changed
+108 -123

No files matched your search

+1
View File
@@ -32,6 +32,7 @@ target_link_libraries(
pico_stdlib
hardware_pio
hardware_pwm
hardware_adc
pico_multicore
)
+17 -10
View File
@@ -1,16 +1,23 @@
//All CVs are 8-bit numbers (range 0 - 255)
#define CV_1 5 //Address - Basic Address
#define CV_2 1 //V_min - Minimum Speed
#define CV_3 1 //Acceleration Rate - Acceleration formula: (CV_3*0.896)/(number of speed steps in use) -> CV_3*7ms/Speed Step
#define CV_4 1 //Deceleration Rate - Deceleration formula: (CV_4*0.896)/(number of speed steps in use) -> CV_4*7ms/Speed Step
#define CV_5 255 //V_max - Maximum Speed
#define CV_6 127 //V_mid - Middle Speed
#define CV_7 13 //Version No. - Decoder-Software version
#define CV_8 13 //Manufacturer - Manufacturer Identification (13 == "Public Domain & Do-It-Yourself Decoders").
#define CV_1 5 //Address - Basic Address
#define CV_2 1 //V_min - Minimum Speed
#define CV_3 1 //Acceleration Rate - Acceleration formula: (CV_3*0.896)/(number of speed steps in use) -> CV_3*7ms/Speed Step
#define CV_4 1 //Deceleration Rate - Deceleration formula: (CV_4*0.896)/(number of speed steps in use) -> CV_4*7ms/Speed Step
#define CV_5 255 //V_max - Maximum Speed
#define CV_6 127 //V_mid - Middle Speed
#define CV_7 13 //Version No. - Decoder-Software version
#define CV_8 13 //Manufacturer - Manufacturer Identification (13 == "Public Domain & Do-It-Yourself Decoders").
// PWM Period Frequency Calculation: pwm_period = ( CV_9*CV_5 ) * 8ns
// The reciprocal of the period is the PWM frequency divided by CV_10
#define CV_9 255 //PWM-Period - Defines the Motor PWM-Period
#define CV_10 1 //PWM Clock Divider - Additional Clock Divider for PWM-Signal
#define CV_9 255 //PWM-Period - Defines the Motor PWM-Period
#define CV_10 1 //PWM Clock Divider - Additional Clock Divider for PWM-Signal
#define CV_47 255 //V_EMF Measure Period duration - Time between measurements of Back-EMF Voltage in ms
#define CV_48 50 //V_EMF Measure Delay - Measure delay time after falling edge of Motor-PWM in us
#define CV_49 10 //PID Control P_Factor
#define CV_50 0 //PID Control I_Factor
#define CV_51 0 //PID Control D_Factor
const uint8_t CV_FUNCTION_ARRAY [256] = {
// 31 30 29 28 - 27 26 25 24 -- 23 22 21 20 - 19 18 17 16 -- 15 14 13 12 - 11 10 9 8 -- 7 6 5 4 - 3 2 1 0 <- GPIO
// byte_3 -- byte_2 -- byte_1 -- byte_0
+89 -112
View File
@@ -7,6 +7,7 @@
#include "hardware/irq.h"
#include "hardware/pio.h"
#include "hardware/pwm.h"
#include "hardware/adc.h"
#include "pwm.pio.h"
#include "automat.h"
#include "CV.h"
@@ -17,28 +18,40 @@
#define MOTOR_PWM_FORWARD 21
#define MOTOR_PWM_REVERSE 22
#define PACKAGE_3_BYTES 0b11111111110000000000000000000000000001
#define PACKAGEMASK_3_BYTES 0b11111111111000000001000000001000000001
#define PACKAGE_MASK_3_BYTES 0b11111111111000000001000000001000000001
#define PACKAGE_4_BYTES 0b11111111110000000000000000000000000000000000001
#define PACKAGEMASK_4_BYTES 0b11111111111000000001000000001000000001000000001
#define PACKAGE_MASK_4_BYTES 0b11111111111000000001000000001000000001000000001
#define PACKAGE_5_BYTES 0b11111111110000000000000000000000000000000000000000000001
#define PACKAGEMASK_5_BYTES 0b11111111111000000001000000001000000001000000001000000001
bool active_functions[SIZE_ACTIVE_FUNCTIONS] = {false};
uint32_t current_speed = 128;
uint32_t new_speed = 128;
#define PACKAGE_MASK_5_BYTES 0b11111111111000000001000000001000000001000000001000000001
#define N_MEASUREMENTS 50
uint64_t last_bits = 0;
int32_t last_alarm_id = -2;
bool active_functions[SIZE_ACTIVE_FUNCTIONS] = {false};
uint32_t target_speed_step = 128;
bool target_direction = true;
int error = 0;
int e_old = 0;
int e_sum = 0;
float t_s = 0.01f;
int sum_limit_max = 1000;
int sum_limit_min = -1000;
float k_p = 0.09f;
float k_i = 0.075f;
float k_d = 0.008f;
float output = 0;
uint target_v_emf = 0;
uint measurement;
int8_t check_for_package() //function returns number of bytes if valid bit-pattern is found. Otherwise -1 is returned
{
uint64_t package3Masked = last_bits & PACKAGEMASK_3_BYTES;
uint64_t package3Masked = last_bits & PACKAGE_MASK_3_BYTES;
if (package3Masked == PACKAGE_3_BYTES) {
return 3;
}
uint64_t package4Masked = last_bits & PACKAGEMASK_4_BYTES;
uint64_t package4Masked = last_bits & PACKAGE_MASK_4_BYTES;
if (package4Masked == PACKAGE_4_BYTES) {
return 4;
}
uint64_t package5Masked = last_bits & PACKAGEMASK_5_BYTES;
uint64_t package5Masked = last_bits & PACKAGE_MASK_5_BYTES;
if (package5Masked == PACKAGE_5_BYTES) {
return 5;
}
@@ -61,51 +74,20 @@ void bits_to_byte_array(int8_t number_of_bytes,uint8_t byte_array[]) {
byte_array[i] = last_bits >> (i * 9 + 1);
}
}
bool get_direction(uint32_t speed_direction_byte){
if(speed_direction_byte>127)return true;
if(speed_direction_byte<128)return false;
return false;
}
void init_pwm(uint gpio) {
uint slice_num = pwm_gpio_to_slice_num(gpio);
uint32_t pwm_period = CV_9*CV_5;
pwm_set_wrap(slice_num, pwm_period);
pwm_set_gpio_level(gpio,0);
pwm_set_clkdiv(slice_num,CV_10);
pwm_set_enabled(slice_num, true);
}
void adjust_pwm_level()
{
//Emergency Stop
if (current_speed == 1 ||current_speed == 129 ){
pwm_set_gpio_level(MOTOR_PWM_FORWARD,0);
pwm_set_gpio_level(MOTOR_PWM_REVERSE,0);
return;
}
//Stop
if (current_speed == 0 ||current_speed == 128 ){
pwm_set_gpio_level(MOTOR_PWM_FORWARD,0);
pwm_set_gpio_level(MOTOR_PWM_REVERSE,0);
return;
}
void interp_speed_step(uint8_t speed_byte){
target_speed_step = speed_byte;
//Forward
if (current_speed>127){
uint x = current_speed-129;
uint duty_cycle = ((CV_2*(126-x)+CV_5*(x-1))*CV_9)/125;
pwm_set_gpio_level(MOTOR_PWM_FORWARD,duty_cycle);
pwm_set_gpio_level(MOTOR_PWM_REVERSE,0);
return;
if(speed_byte>127){
target_v_emf = (speed_byte-129)*32;
target_direction = true;
}
//Reverse
if (current_speed<128){
uint x = current_speed-1;
uint duty_cycle = ((CV_2*(126-x)+CV_5*(x-1))*CV_9)/125;
pwm_set_gpio_level(MOTOR_PWM_FORWARD,0);
pwm_set_gpio_level(MOTOR_PWM_REVERSE,duty_cycle);
return;
if(speed_byte<128) {
target_v_emf = (speed_byte-1)*32;
target_direction = false;
}
if (speed_byte == 128 || speed_byte==0) target_v_emf = 0;
}
void set_outputs() {
@@ -115,11 +97,10 @@ void set_outputs() {
for (uint8_t i = 0; i < SIZE_ACTIVE_FUNCTIONS; i++) {
if (active_functions[i]) {
printf("F%u == 1\n",i);
bool current_direction = get_direction(current_speed);
uint8_t func_cv_0 = CV_FUNCTION_ARRAY[4 + i * 8 - 4 * current_direction];
uint8_t func_cv_1 = CV_FUNCTION_ARRAY[5 + i * 8 - 4 * current_direction];
uint8_t func_cv_2 = CV_FUNCTION_ARRAY[6 + i * 8 - 4 * current_direction];
uint8_t func_cv_3 = CV_FUNCTION_ARRAY[7 + i * 8 - 4 * current_direction];
uint8_t func_cv_0 = CV_FUNCTION_ARRAY[4 + i * 8 - 4 * target_direction];
uint8_t func_cv_1 = CV_FUNCTION_ARRAY[5 + i * 8 - 4 * target_direction];
uint8_t func_cv_2 = CV_FUNCTION_ARRAY[6 + i * 8 - 4 * target_direction];
uint8_t func_cv_3 = CV_FUNCTION_ARRAY[7 + i * 8 - 4 * target_direction];
uint32_t func_cv = (func_cv_0) + (func_cv_1 << 8) + (func_cv_2 << 16) + (func_cv_3 << 24);
GPIO_to_be_set = (GPIO_to_be_set | func_cv) & filter_forbidden_GPIO;
uint32_t mask = 1;
@@ -202,9 +183,9 @@ void instruction_evaluation(uint8_t number_of_bytes,const uint8_t byte_array[])
//0011-1111 (128 Speed Step Control) - 2 Byte length
if (command_byte_n == 0b00111111)
{
// printf("0011-1111 (128 Speed Step Control) Instruction\n");
//printf("0011-1111 (128 Speed Step Control) Instruction\n");
uint8_t command_byte_n_minus1 = byte_array[command_byte_start_index - 1];
multicore_fifo_push_blocking(command_byte_n_minus1);
if (command_byte_n_minus1 != target_speed_step) interp_speed_step(command_byte_n_minus1);
}
// 10XX-XXXX (Function Group Instruction)
if (command_byte_n >> 6 == 0b00000010)
@@ -263,74 +244,70 @@ void gpio_callback_rise(unsigned int gpio, long unsigned int events) {
instruction_evaluation(number_of_bytes,byte_array);
}
}
// for (int i = 0; i < number_of_bytes; i++) {
// printf("BYTE_%u:" BYTE_TO_BINARY_PATTERN "\n", i, BYTE_TO_BINARY(byte_array[i]));
// }
// printf("Paketgroesse: %u\n", number_of_bytes);
// printf("\n");
}
}
int64_t speed_control_alarm(alarm_id_t id, void *user_data) {
printf("current speed: %u\n", current_speed);
bool current_direction = get_direction(current_speed);
bool new_direction = get_direction(new_speed);
// Check for Opposite Direction, Emergency Break
if (new_speed == 1 || new_speed == 129 ){
current_speed = new_speed;
adjust_pwm_level();
void adjust_pwm_level(uint16_t level)
{
if(target_direction){
pwm_set_gpio_level(MOTOR_PWM_REVERSE,0);
pwm_set_gpio_level(MOTOR_PWM_FORWARD,level);
}
if (current_direction != new_direction ){
if (new_direction == 1) current_speed = 128;
else current_speed = 0;
adjust_pwm_level();
return 10000;
// add_alarm_in_ms(10,speed_control_alarm,NULL,true);
}
// "Speed control"
else{
if (current_speed==new_speed) {
last_alarm_id = -2;
return 0;
}
if (current_speed<new_speed){
if(current_speed == 0 || current_speed == 128)current_speed++;
current_speed++;
adjust_pwm_level();
return 7*CV_3*1000;
// add_alarm_in_ms(7*CV_3,speed_control_alarm,NULL,true);
}else{
if(current_speed == 2 || current_speed == 130)current_speed--;
current_speed--;
adjust_pwm_level();
return 7*CV_4*1000;
// add_alarm_in_ms(7*CV_4,speed_control_alarm,NULL,true);
}
pwm_set_gpio_level(MOTOR_PWM_FORWARD,0);
pwm_set_gpio_level(MOTOR_PWM_REVERSE,level);
}
}
//FIFO Interrupt Handler
void core1_sio_irq() {
//Look for changes in speed
if (multicore_fifo_pop_blocking() != new_speed){
new_speed = multicore_fifo_pop_blocking();
//look for alarm running already
if (last_alarm_id == -2) last_alarm_id = add_alarm_in_ms(10, speed_control_alarm, NULL, true);
multicore_fifo_clear_irq();
}else{
multicore_fifo_clear_irq();
}
void measure(){
pwm_set_gpio_level(MOTOR_PWM_FORWARD,0);
pwm_set_gpio_level(MOTOR_PWM_REVERSE,0);
busy_wait_us(100);
uint sum = 0;
for (int i = 0; i < N_MEASUREMENTS; ++i) {
sum = sum+adc_read();
}
measurement = (int)sum / N_MEASUREMENTS;
}
void pid_control(){
measure();
error = (int)target_v_emf - (int)measurement;
e_sum = e_sum + error;
if (e_sum > sum_limit_max) e_sum = sum_limit_max;
if (e_sum < sum_limit_min) e_sum = sum_limit_min;
output = output+ (k_p * (float)error) + (k_i * t_s * (float)e_sum) + ((k_d/t_s) * (float)(error - e_old));
e_old = error;
if (output > 5000) output = 5000;
if (output < 1400) output = 1400;
if (target_v_emf == 0) output = 0;
adjust_pwm_level((u_int16_t )output);
busy_wait_us(10000);
}
void init_pwm(uint gpio) {
uint slice_num = pwm_gpio_to_slice_num(gpio);
uint32_t wrap_counter = 5000; // 5000 Cycles @ 125MHz for 1 Period -> 25kHz
pwm_set_wrap(slice_num, wrap_counter);
pwm_set_gpio_level(gpio,0);
pwm_set_clkdiv(slice_num,1);
pwm_set_enabled(slice_num, true);
printf("PWM on GPIO %u was initialized.\n",gpio);
}
void init_adc(){
adc_init();
adc_gpio_init(26);
adc_select_input(0);
printf("ADC was initialized.\n");
}
void core1_entry() {
multicore_fifo_clear_irq();
irq_set_exclusive_handler(SIO_IRQ_PROC1, core1_sio_irq);
irq_set_enabled(SIO_IRQ_PROC1, true);
gpio_set_function(MOTOR_PWM_FORWARD, GPIO_FUNC_PWM);
gpio_set_function(MOTOR_PWM_REVERSE, GPIO_FUNC_PWM);
init_adc();
init_pwm(MOTOR_PWM_FORWARD);
init_pwm(MOTOR_PWM_REVERSE);
printf("Core 1 init finished\n");
while (1) ;
printf("Core 1 was initialized.\n");
while (1) pid_control();
}
int main() {
sleep_ms(1000);
+1 -1
View File
@@ -9,4 +9,4 @@
(byte & 0x04 ? '1' : '0'), \
(byte & 0x02 ? '1' : '0'), \
(byte & 0x01 ? '1' : '0')
void pid_control();