- Minor changes to variable names, comments & formatting

- Removed obsolete parameter previously used in program_mode
- Added correction constant regarding base pwm measurement
- Revised GPIO definitions (shared.h)
This commit is contained in:
1nct committed 2022-08-03 19:19:14 +02:00
1 parent bae6fff659
commit 0219963dd7
5 files changed
+106 -98

No files matched your search

+6 -8
View File
@@ -1,19 +1,18 @@
#pragma once
#define CV_ARRAY_SIZE 512
// All CVs are 8-bit numbers (range 0 - 255)
// All CVs are 8-bit numbers ranging from (0 - 255)dec ≙ (0b00000000 - 0b11111111)bin ≙ (0x00 - 0xFF)hex
// Note : CV_1 ≙ index 0, CV_2 ≙ index 1, CV_3 ≙ index 2, ...
// TODO: - Packet Timeout
uint8_t CV_ARRAY_DEFAULT [CV_ARRAY_SIZE] = {
0b00000011, //CV_1 - Basic address CV_1 = 0 is not allowed and used for initiating ADC offset adjustment //TODO: verify
0b00001000, //CV_2 - V_min - Default = 8
0b00000011, //CV_1 - Basic address - CV_1 = 0 and CV_1 > 127 are not valid - Default = 3
0b00001000, //CV_2 - V_min - Default = 8
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// 0 == Fastest dec/acc rate; 255 == slowest;
0b00000000, //CV_3 - Acceleration rate - CV_3*CV_175 = Time for one discrete speed step change in ms
0b00000000, //CV_4 - Deceleration rate - CV_4*CV_175 = Time for one discrete speed step change in ms
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
0b01100100, //CV_5 - V_max - Default = 100*16
0b00111111, //CV_6 - V_mid - Default = 63*16
0b01100100, //CV_5 - V_max - Default = 100*16
0b00111111, //CV_6 - V_mid - Default = 63*16
0b00000001, //CV_7 - Version no. (read-only)
0b00001101, //CV_8 - Manufacturer (13 = Public Domain & Do-It-Yourself Decoders) (read-only)
0b10010110, //CV_9 - PWM frequency in Hz = CV_9*100+10000 - Default = (150*100+10000)Hz = 25kHz
@@ -135,7 +134,7 @@ uint8_t CV_ARRAY_DEFAULT [CV_ARRAY_SIZE] = {
// This Config can cause conflicts when GPIOs controlled by the same slice are enabled at the same time.
0b00000000, //CV_112 - GPIO 24-31 enable PWM
0b00000000, //CV_113 - GPIO 16-23 enable PWM
0b00111100, //CV_114 - GPIO 8-15 enable PWM
0b00000000, //CV_114 - GPIO 8-15 enable PWM
0b00000000, //CV_115 - GPIO 0-7 enable PWM
//Slice 0
0b00000000, //CV_116 - Wrap Bits 8-15
@@ -204,7 +203,6 @@ uint8_t CV_ARRAY_DEFAULT [CV_ARRAY_SIZE] = {
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//Offset adjustment for ADC //
//If CV_172 = 0xFF = 255 there will be a measurement procedure on startup //
//alternatively, the measurement can be done by writing a 0 to CV_1 on the programming track //
0b11111111, //CV_172 - ADC offset Default: 255 //
0b01111111, //CV_173 - ADC offset measurement cycles Default: 127 //
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+79 -74
View File
@@ -5,6 +5,7 @@
//////////////////////////
#include "core0.h"
// XIP_BASE + FLASH_TARGET_OFFSET = "0x101FF000"
const uint8_t *CV_ARRAY_FLASH = (const uint8_t *) (XIP_BASE + FLASH_TARGET_OFFSET);
uint64_t input_bit_buffer = 0;
uint16_t level_table[32] = {0};
@@ -98,7 +99,7 @@ void acknowledge() {
}
// When Bit matches sent byte -> acknowledge()
// When bit matches sent byte -> acknowledge()
void verify_cv_bit(uint16_t cv_address,bool bit_val, uint8_t bit_pos) {
uint8_t mask = 0b00000001;
bool res = ( (CV_ARRAY_FLASH[cv_address] >> bit_pos) &mask ) == bit_val;
@@ -108,11 +109,13 @@ void verify_cv_bit(uint16_t cv_address,bool bit_val, uint8_t bit_pos) {
}
// When Byte matches sent byte -> acknowledge()
// When byte matches sent byte -> acknowledge()
void verify_cv_byte(uint16_t cv_address, uint8_t cv_data){
if (CV_ARRAY_FLASH[cv_address] == cv_data) acknowledge();
}
// CV writing function first erases necessary amount of blocks in flash and then rewrites to flash
void regular_cv_write(uint16_t cv_index, uint8_t cv_data){
uint8_t CV_ARRAY_TEMP[CV_ARRAY_SIZE];
memcpy(CV_ARRAY_TEMP, CV_ARRAY_FLASH, sizeof(CV_ARRAY_TEMP));
@@ -123,41 +126,39 @@ void regular_cv_write(uint16_t cv_index, uint8_t cv_data){
}
// CV writing function first erases block in flashes and then rewrites to flash
// Writing to read-only functions also gets handled here (e.g. complete reset to default)
// There are some exceptions to writing CVs - e.g. writing to a read only CV is not valid - this gets handled here
void write_cv_handler(uint16_t cv_index, uint8_t cv_data){
switch (cv_index) {
// CV_1 => Value = 0 is not allowed
case 0:
case 0: //CV_1
// CV_1 => Value = 0 is not allowed
if (cv_data == 0 || cv_data > 127) break;
// CV_7 & CV_8 are read-only
// ADC offset Adjustment (CV_7; Value = 7);
case 6:
case 6: //CV_7
// Read only (CV_7 - Version no.)
// ADC offset Adjustment (CV_7; Value = 7);
if (cv_data == 7) adc_offset_adjustment(8192);
break;
// Reset all CVs to Default (CV_8; Value = 8)
case 7:
case 7: //CV_8
// Read only (CV_8 - Manufacturer ID)
// Reset all CVs to Default (CV_8; Value = 8)
if (cv_data == 8){
flash_range_erase(FLASH_TARGET_OFFSET, FLASH_SECTOR_SIZE);
flash_range_program(FLASH_TARGET_OFFSET, CV_ARRAY_DEFAULT, FLASH_PAGE_SIZE * 2);
}
break;
// CV_17 must have a value between 11000000->(192dec) and 11100111->(231dec) inclusive
// CV_17 == 192 && CV_18 == 0 -> Address = 0 is also not valid and therefore shall not be set
case 16:
case 16: //CV_17
if ( (cv_data < 192 || cv_data > 231) || (CV_ARRAY_FLASH[17] == 0 && cv_data == 192) ) break;
else regular_cv_write(cv_index,cv_data);
break;
case 17:
case 17: //CV_18
if(CV_ARRAY_FLASH[16] == 192 && cv_data == 0) break;
else regular_cv_write(cv_index,cv_data);
break;
// CV_31 & CV_32 Index high byte isn't implemented and shall not be set
case 30:
case 31:
case 30: //CV_31
case 31: //CV_32
break;
// Regular CV write is carried out
default:
regular_cv_write(cv_index,cv_data);
@@ -166,7 +167,7 @@ void write_cv_handler(uint16_t cv_index, uint8_t cv_data){
// CV Programming function resets core1 and evaluates the type of programming instruction (e.g. write byte)
void program_mode(uint8_t number_of_bytes, const uint8_t * const byte_array, bool restart_core1){
void program_mode(uint8_t number_of_bytes, const uint8_t * const byte_array){
//First check for valid programming command ("address" 112-127)
if (byte_array[number_of_bytes - 1]<128 && byte_array[number_of_bytes - 1]>111){
uint8_t instruction_type_mask = 0b00001100;
@@ -210,25 +211,28 @@ void program_mode(uint8_t number_of_bytes, const uint8_t * const byte_array, boo
}
// Set outputs according to configuration (PWM on/off, PWM duty cycle/level, ...)
void set_outputs(uint32_t functions_to_set_bitmask) {
// Get outputs with pwm enabled and preset outputs_to_set_PWM variable with resulting GPIO Bitmask
uint32_t PWM_enabled_outputs = get_32bit_CV(111);
uint32_t outputs_to_set_PWM = PWM_enabled_outputs;
// Get enabled output configuration corresponding to set functions and direction
uint32_t outputs_to_set = 0;
uint32_t outputs_with_PWM_enabled = get_32bit_CV(111); //get outputs with pwm enabled (bitmask) // TODO: Verify - should be fine...
uint32_t outputs_to_set_PWM = outputs_with_PWM_enabled;
uint32_t temp_mask = 1;
for (uint8_t i = 0; i < 32; i++) {
if (temp_mask & functions_to_set_bitmask ){
//outputs_to_set |= get_32bit_CV(i * 8 + 260 - 4 * get_direction(0)); //TODO: verify
outputs_to_set |= get_32bit_CV(i * 8 + 260 - 4 * get_direction(0));
}
temp_mask<<=1;
}
outputs_to_set &= GPIO_ALLOWED_OUTPUTS; // Prevent illegal GPIO
outputs_to_set_PWM &= outputs_to_set; // Outputs with PWM to be enabled
outputs_to_set &= ~outputs_to_set_PWM; // Outputs without PWM to be enabled
// Set regular outputs without PWM, preventing illegal GPIO by masking with GPIO_ALLOWED_OUTPUTS
gpio_put_masked(GPIO_ALLOWED_OUTPUTS, outputs_to_set);
// Set PWM enabled outputs to desired level
temp_mask = 1;
for (uint8_t i = 0; i < 32; ++i) {
if(temp_mask & outputs_to_set_PWM){
@@ -236,7 +240,7 @@ void set_outputs(uint32_t functions_to_set_bitmask) {
pwm_gpio_to_channel(i);
pwm_gpio_to_slice_num(i);
}
else if (temp_mask & outputs_with_PWM_enabled){
else if (temp_mask & PWM_enabled_outputs){
pwm_set_gpio_level(i,0);
}
temp_mask<<=1;
@@ -248,15 +252,19 @@ void set_outputs(uint32_t functions_to_set_bitmask) {
void update_active_functions(uint32_t new_function_bitmask, uint8_t clr_bit_ind, bool direction_change) {
static uint32_t active_functions;
static uint32_t prev_active_func;
if (direction_change){
set_outputs(prev_active_func);
}
// Outputs depend on direction
// In case of a direction change every output needs to be set according to configuration for the other direction
if (direction_change) set_outputs(active_functions);
// In case of a change in active functions only the function group corresponding to the instruction is considered
// Check for changes and set outputs accordingly
else{
new_function_bitmask &= ~(clr_bit_arr[clr_bit_ind]); //clear every bit except bits corresponding to group of functions
active_functions &= clr_bit_arr[clr_bit_ind]; //clear bits corresponding to group of functions
active_functions |= new_function_bitmask; //write bits corresponding to group of functions
uint32_t changes = active_functions ^ prev_active_func; //xor effectively checks for changes from previous state
if(changes)set_outputs(active_functions);
new_function_bitmask &= ~(clr_bit_arr[clr_bit_ind]); // Clear every bit except bits corresponding to group of functions
active_functions &= clr_bit_arr[clr_bit_ind]; // Clear bits corresponding to group of functions
active_functions |= new_function_bitmask; // Write bits corresponding to group of functions
uint32_t changes = active_functions ^ prev_active_func; // Checks for changes from previous state
if(changes) set_outputs(active_functions);
prev_active_func = active_functions;
}
}
@@ -334,11 +342,14 @@ void instruction_evaluation(uint8_t number_of_bytes,const uint8_t * const byte_a
//0011-1111 (128 Speed Step Control) - 2 Byte length
if (command_byte_n == 0b00111111){
bool prev_dir = get_direction(0);
static bool prev_dir;
uint32_t speed_step = byte_array[command_byte_start_index - 1];
multicore_fifo_push_blocking(speed_step);
// In case of a direction change, functions need to be updated because functions might depend on direction state
if (get_direction(0) != prev_dir) update_active_functions(0,0,true);
if (get_direction(0) != prev_dir) {
update_active_functions(0,0,true);
prev_dir = get_direction(0);
}
}
// 10XX-XXXX (Function Group Instruction)
@@ -379,30 +390,22 @@ void instruction_evaluation(uint8_t number_of_bytes,const uint8_t * const byte_a
bool reset_package_check(uint8_t number_of_bytes,const uint8_t * const byte_array){
if (byte_array[number_of_bytes-1] == 0b00000000 && byte_array[number_of_bytes-2] == 0b00000000){
uint32_t speed_step = 1;
multicore_fifo_push_blocking(speed_step);
update_active_functions(0,0,0); //TODO: is this correct?
multicore_fifo_push_blocking(speed_step); // Emergency Stop
update_active_functions(0,0,0); // Disables all functions
return true;
}
else {
return false;
}
else return false;
}
// Checks for valid package - looking for correct preamble
int8_t check_for_package() { //returns number of bytes if valid bit-pattern is found. Otherwise -1 is returned.
uint64_t package3Masked = input_bit_buffer & PACKAGE_MASK_3_BYTES;
if (package3Masked == PACKAGE_3_BYTES) {
return 3;
}
if (package3Masked == PACKAGE_3_BYTES) return 3;
uint64_t package4Masked = input_bit_buffer & PACKAGE_MASK_4_BYTES;
if (package4Masked == PACKAGE_4_BYTES) {
return 4;
}
if (package4Masked == PACKAGE_4_BYTES) return 4;
uint64_t package5Masked = input_bit_buffer & PACKAGE_MASK_5_BYTES;
if (package5Masked == PACKAGE_5_BYTES) {
return 5;
}
if (package5Masked == PACKAGE_5_BYTES) return 5;
return -1;
}
@@ -420,7 +423,7 @@ void evaluation(){
static bool core1_launched = false;
static bool reset_package_flag;
int8_t number_of_bytes = check_for_package();
// number of bytes is != -1 when the package is valid
// number_of_bytes contains the amount of bytes when the package is valid, otherwise -1
if (number_of_bytes != -1) {
// Split data into 8Bit array
uint8_t byte_array[SIZE_BYTE_ARRAY] = {0};
@@ -440,7 +443,7 @@ void evaluation(){
}
// When previous packet was a reset package -> enter program mode
else if (reset_package_flag) {
program_mode(number_of_bytes,byte_array,true);
program_mode(number_of_bytes,byte_array);
}
// Check for reset package and set flag when reset package is received
else {
@@ -481,28 +484,30 @@ void track_signal_fall(unsigned int gpio, long unsigned int events) {
}
// Output initialization function - configures pwm frequency and clock divider according to CV_ARRAY_FLASH[]
// Output initialization function - Configures pwm frequency and clock divider according to CV_111 - CV_171
void init_outputs(){
gpio_init_mask(GPIO_ALLOWED_OUTPUTS);
gpio_set_dir_out_masked(GPIO_ALLOWED_OUTPUTS); //note: This might also disable UART on GPIO0 & GPIO1
uint32_t Outputs_with_PWM_enabled = get_32bit_CV(111); // TODO: Verify - should be fine...
gpio_set_dir_out_masked(GPIO_ALLOWED_OUTPUTS); // Note: This might also disable UART on GPIO0 & GPIO1
uint32_t PWM_enabled_outputs = get_32bit_CV(111) & GPIO_ALLOWED_OUTPUTS;
uint32_t slice, channel;
uint16_t wrap, level;
uint32_t temp_mask = 1;
uint8_t clock_divider;
uint32_t mask = 1;
for (uint8_t i = 0; i < 32; ++i) {
if (Outputs_with_PWM_enabled&temp_mask){
if (PWM_enabled_outputs & mask){
slice = pwm_gpio_to_slice_num(i);
channel = pwm_gpio_to_channel(i); //0 for Channel A, 1 for Channel B
wrap = get_16bit_CV(115 + slice*7); // TODO: Verify
level = get_16bit_CV(118 + 7*slice+ 2*channel); // TODO: Verify
channel = pwm_gpio_to_channel(i); // Channel A = "0"; Channel B = "1"
wrap = get_16bit_CV(115 + 7*slice);
level = get_16bit_CV(118 + 7*slice + 2*channel);
clock_divider = CV_ARRAY_FLASH[117+7*slice] + 1;
gpio_set_function(i,GPIO_FUNC_PWM);
pwm_set_wrap(slice,wrap);
pwm_set_gpio_level(i,0);
level_table[i] = level;
pwm_set_clkdiv_int_frac(slice,CV_ARRAY_FLASH[117+7*slice],0);
pwm_set_clkdiv_int_frac(slice,clock_divider,0);
pwm_set_enabled(slice,true);
}
temp_mask<<=1;
mask<<=1;
}
}
@@ -514,25 +519,25 @@ uint16_t measure_base_pwm(bool direction, uint8_t iterations){
else gpio = MOTOR_REV_PIN;
float level_arr[iterations];
for (int i = 0; i < iterations; ++i) {
uint16_t level = 0;
uint16_t max_level = (_125M/(CV_ARRAY_FLASH[8]*100+10000));
uint16_t level = max_level/20;
float measurement;
do {
pwm_set_gpio_level(gpio, level);
busy_wait_ms(15);
level += 10;
level += max_level/500;
measurement = measure(CV_ARRAY_FLASH[60],
CV_ARRAY_FLASH[61],
CV_ARRAY_FLASH[62],
CV_ARRAY_FLASH[63],
direction);
}
// (Measurement - ADC_Offset) < 5.0f
while((measurement - (float)CV_ARRAY_FLASH[171]) < 5.0f);
level_arr[i] = (float)level;
busy_wait_ms(500);
busy_wait_ms(100);
}
// Find and return overall average discarding outliers in measurement
return (uint16_t)two_std_dev(level_arr,5);
// Find and return overall average discarding outliers in measurement - multiply with 0.9
return (uint16_t)(0.9f*two_std_dev(level_arr,5));
}
@@ -544,13 +549,13 @@ void cv_setup_check(){
// Check for flash factory setting and set CV_FLASH_ARRAY to default values when factory condition is found.
if ( CV_ARRAY_FLASH[64] ){
uint8_t arr[4] = {125,8,7,124};
program_mode(4,arr,false); //reset to CV_ARRAY_DEFAULT (write CV_8 = 8)
program_mode(4,arr); //reset to CV_ARRAY_DEFAULT (write CV_8 = 8)
}
// Check for adc offset setup
if ( CV_ARRAY_FLASH[171] == 0xFF ){
uint8_t arr[4] = {125,7,6,124};
program_mode(4,arr,false); //ADC offset adjustment (write CV_7 = 7)
program_mode(4,arr); //ADC offset adjustment (write CV_7 = 7)
}
// Check for base PWM configuration - used for feed-forward
@@ -560,9 +565,9 @@ void cv_setup_check(){
uint8_t base_pwm_fwd_high_byte = base_pwm_fwd>>8;
uint8_t base_pwm_fwd_low_byte = base_pwm_fwd&0x00FF;
uint8_t arr0[4] = {125,base_pwm_fwd_high_byte,175,124};
program_mode(4,arr0,false);
program_mode(4,arr0);
uint8_t arr1[4] = {125,base_pwm_fwd_low_byte,176,124};
program_mode(4,arr1,false);
program_mode(4,arr1);
}
// Reverse Direction
if (get_16bit_CV(177) == 0){
@@ -570,9 +575,9 @@ void cv_setup_check(){
uint8_t base_pwm_rev_high_byte = base_pwm_rev>>8;
uint8_t base_pwm_rev_low_byte = base_pwm_rev&0x00FF;
uint8_t arr0[4] = {125,base_pwm_rev_high_byte,177,124};
program_mode(4,arr0,false);
program_mode(4,arr0);
uint8_t arr1[4] = {125,base_pwm_rev_low_byte,178,124};
program_mode(4,arr1,false);
program_mode(4,arr1);
}
}
+1 -1
View File
@@ -30,7 +30,7 @@ void verify_cv_bit(uint16_t cv_address,bool bit_val, uint8_t bit_pos);
void verify_cv_byte(uint16_t cv_address, uint8_t cv_data);
void regular_cv_write(uint16_t cv_index, uint8_t cv_data);
void write_cv_handler(uint16_t cv_index, uint8_t cv_data);
void program_mode(uint8_t number_of_bytes, const uint8_t byte_array[], bool restart_core1);
void program_mode(uint8_t number_of_bytes, const uint8_t byte_array[]);
void set_outputs(uint32_t functions_to_set_bitmask);
void update_active_functions(uint32_t byte, uint8_t clr_bit_ind,bool direction_change);
bool error_detection(int8_t number_of_bytes, const uint8_t byte_array[]);
+6 -5
View File
@@ -19,7 +19,7 @@ void update_speed_dir(pid_params *pid, uint32_t speed_step_target){
if (pid->speed_step_target == 128) pid->end_target_index = 0;
else pid->end_target_index = (pid->speed_step_target-129);
}
// Reverse
// Reverse
else {
pid->direction = false^reverse_dir;
if (pid->speed_step_target == 0) pid->end_target_index = 0;
@@ -75,11 +75,12 @@ bool speed_helper(struct repeating_timer *t) {
// Helper function to adjust pwm level/duty cycle.
void adjust_pwm_level(uint16_t level, pid_params *pid) {
// Forward
if (pid->direction) {
pwm_set_gpio_level(MOTOR_REV_PIN, 0);
pwm_set_gpio_level(MOTOR_FWD_PIN, level);
}
//Reverse
// Reverse
else {
pwm_set_gpio_level(MOTOR_FWD_PIN, 0);
pwm_set_gpio_level(MOTOR_REV_PIN, level);
@@ -241,12 +242,12 @@ void init_pid(pid_params *pid){
pid->cd_1 = (2*pid->tau-pid->t)/(2*pid->tau+pid->t);
pid->int_lim_max = 10*(float)CV_ARRAY_FLASH[51];
pid->int_lim_min = -10*(float)CV_ARRAY_FLASH[52];
pid->k_ff = (float)CV_ARRAY_FLASH[46]/10000; // 0.005f;
pid->k_ff = (float)CV_ARRAY_FLASH[46]/10000;
pid->max_output = (float)(_125M/(CV_ARRAY_FLASH[8]*100+10000));
pid->x_1_rev = 0.0f;
pid->x_1_fwd = 0.0f;
pid->y_1_fwd = (float)get_16bit_CV(175); //(float)measure_base_pwm(pid,1);
pid->y_1_rev = (float)get_16bit_CV(177); //(float)measure_base_pwm(pid,0);
pid->y_1_fwd = (float)get_16bit_CV(175);
pid->y_1_rev = (float)get_16bit_CV(177);
pid->x_2_rev = (float)pid->speed_table[126];
pid->x_2_fwd = (float)pid->speed_table[126];
+14 -10
View File
@@ -14,23 +14,27 @@
#include "hardware/adc.h"
#include "hardware/flash.h"
#include "hardware/irq.h"
// Constant Value of 125 x 10⁶
#define _125M 125000000
// GPIO used for DCC-Signal, Motor PWM or ADC
#define DCC_INPUT_PIN 21u
#define MOTOR_FWD_PIN 23u
#define MOTOR_REV_PIN 22u
#define FWD_V_EMF_ADC_PIN 28u
#define REV_V_EMF_ADC_PIN 29u
//Aux output pins (GPIO 24,25,26,27)
#define AUX_PIN_MASK (1u<<24) | (1u<<25) | (1u<<26) | (1u<<27)
//GPIO pins configured as inputs (Input functionality not implemented yet)
#define GPIO_INPUT_MASK 0b00000000000000000000000000000000
//GPIO pins configured as outputs
#define GPIO_OUTPUT_MASK 0b00000000000000000000000000000000
//GPIO pin mask to prevent setting illegal GPIOs (ADC, Motor, DCC Input Pin)
// GPIO used directly (GPIO 0-5 incl.) as outputs or to switch auxiliary output transistors (GPIO 24-27 incl.)
#define GPIO_OUTPUT_PIN_MASK (1u<<24) | (1u<<25) | (1u<<26) | (1u<<27) | (1u<<5) | (1u<<4) | (1u<<3) | (1u<<2) | (1u<<1) | (1u<<0)
// GPIO pin mask to prevent setting illegal GPIOs (ADC, Motor, DCC Input Pin)
#define GPIO_ILLEGAL_MASK (1u<<DCC_INPUT_PIN) | (1u<<MOTOR_FWD_PIN) | (1u<<MOTOR_REV_PIN) | (1u<<FWD_V_EMF_ADC_PIN) | (1u<<REV_V_EMF_ADC_PIN)
//GPIO pin mask with allowed outputs (AUX & GPIO (configured as outputs))
#define GPIO_ALLOWED_OUTPUTS (GPIO_OUTPUT_MASK|AUX_PIN_MASK) & ~(GPIO_ILLEGAL_MASK)
#define FLASH_TARGET_OFFSET (PICO_FLASH_SIZE_BYTES-FLASH_SECTOR_SIZE) //This Offset should be far enough away from program data
// GPIO pin mask with allowed outputs (AUX & GPIO (configured as outputs))
#define GPIO_ALLOWED_OUTPUTS (GPIO_OUTPUT_PIN_MASK) & ~(GPIO_ILLEGAL_MASK)
// Offset from base address used for saving CV_ARRAY_FLASH
#define FLASH_TARGET_OFFSET (PICO_FLASH_SIZE_BYTES-FLASH_SECTOR_SIZE)
extern repeating_timer_t pid_control_timer;
extern repeating_timer_t speed_helper_timer;