- implemented linear approximation for pwm duty cycle offset (feed forward)
- changed pid params and variables in measure() from float to integers - implemented Motor PWM Frequency CV - improved acknowledge() function ( 3ms forward / 3ms reverse ) - moved automatic offset setup to speed step evaluation - removed zener diode correction - some minor changes regarding naming of constants
This commit is contained in:
1 parent
cdb68b84da
commit
2cad01370c
6 files changed
+146
-151
No files matched your search
@@ -13,15 +13,15 @@ uint8_t CV_ARRAY_DEFAULT [CV_ARRAY_SIZE] = {
|
||||
0b00000000, //CV_2 - Minimum Speed
|
||||
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
// 0 == Fastest dec/acc rate; 255 == slowest;
|
||||
0b00000000, //CV_3 - Acceleration Rate
|
||||
0b00000000, //CV_4 - Deceleration Rate
|
||||
0b00000000, //CV_3 - Acceleration Rate - CV_3*CV_59 = Time for one discrete speed step change in ms
|
||||
0b00000000, //CV_4 - Deceleration Rate - CV_4*CV_59 = Time for one discrete speed step change in ms
|
||||
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
0b11111111, //CV_5 - V_max
|
||||
0b01111111, //CV_6 - V_mid
|
||||
0b00000001, //CV_7 - Version No.
|
||||
0b00001101, //CV_8 - Manufacturer
|
||||
0b00000000, //CV_9 - PWM-Period
|
||||
0b00000001, //CV_10 - PWM Clock Divider
|
||||
0b00001101, //CV_8 - Manufacturer (13 = Public Domain & Do-It-Yourself Decoders)
|
||||
0b10010110, //CV_9 - PWM Frequency in Hz = CV_9*100+10000 - Default = (150*100+10000)Hz = 25kHz
|
||||
0b00000001, //CV_10 -
|
||||
0b11111111, //CV_11 - Packet Timeout in seconds
|
||||
0b00000100, //CV_12 - Permitted operating modes
|
||||
0b00000000, //CV_13 -
|
||||
@@ -65,20 +65,21 @@ uint8_t CV_ARRAY_DEFAULT [CV_ARRAY_SIZE] = {
|
||||
0b00000000, //CV_46 -
|
||||
0b00000000, //CV_47 -
|
||||
// PID - Configuration //////////////////////////////////////////////////////////////////////////////////////////////
|
||||
0b00001111, //CV_48 - PID Control Sampling Time t_s in ms ≙ Duration of 1 PID-Cycle //
|
||||
0b00000101, //CV_48 - PID Control Sampling Time t_s in ms ≙ Duration of 1 PID-Cycle //
|
||||
0b01110011, //CV_49 - PID Control P_Factor ≙ CV_49/256 i.e. Default = 115 -> 0.4492 //
|
||||
0b01100110, //CV_50 - PID Control I_Factor ≙ CV_50/64 i.e. Default = 102 -> 1.594 (1/sec)//
|
||||
0b01111011, //CV_51 - PID Control D_Factor ≙ CV_51/4096 i.e. Default = 123 -> 0.03002 sec //
|
||||
0b00110000, //CV_52 - PID Integral Limit positive ≙ CV_52*10 i.e. Default = 48 -> +480 //
|
||||
0b00110000, //CV_53 - PID Integral Limit negative ≙ CV_53*(-10) i.e. Default = 48 -> -480 //
|
||||
//This Offset is used to establish a "baseline" motor PWM duty cycle at which the motor starts to move
|
||||
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
//This Offset is used to establish a "baseline" motor PWM duty cycle at which the motor starts to move //
|
||||
//If CV_54+CV_55+CV_56+CV_57 = 0 (after reset or manual overwrite) there will be a measurement procedure on startup//
|
||||
//alternatively, the measurement can be done by writing a 7 to CV_7 on the programming track. //
|
||||
0b00000000, //CV_54 - Forward Direction Offset Bits 0-7 Default = 0 //
|
||||
0b00000000, //CV_55 - Forward Direction Offset Bits 8-15 Default = 0 //
|
||||
0b00000000, //CV_56 - Reverse Direction Offset Bits 0-7 Default = 0 //
|
||||
0b00000000, //CV_57 - Reverse Direction Offset Bits 8-15 Default = 0 //
|
||||
0b00000110, //CV_58 - Offset Measurement Cycles Default = 6 //
|
||||
0b00001000, //CV_58 - Offset Measurement Cycles Default = 8 //
|
||||
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
||||
0b00000111, //CV_59 - speed_helper timer delay - can be used to adjust accel/decel rate //
|
||||
0b00010100, //CV_60 - PWM scaling factor (target EMF Voltage) -> 126*CV_60 = end_target|max //
|
||||
@@ -86,7 +87,6 @@ uint8_t CV_ARRAY_DEFAULT [CV_ARRAY_SIZE] = {
|
||||
0b01000110, //CV_61 - V_EMF Total amount of Measurement Iterations - Default = 70 iterations //
|
||||
0b01100100, //CV_62 - V_EMF Delay before Measuring - Default = 100us //
|
||||
// CV_63 and CV_64 are used to determine how many elements of the sorted measurement array will be discarded //
|
||||
// This is used to filter out data. //
|
||||
// For Example: CV_63 = x and CV_64 = y //
|
||||
// -> The x smallest values will be discarded. //
|
||||
// -> The y largest values will be discarded. //
|
||||
|
||||
Reference in new issue
Block a user