Compare commits

..
3 Commits
Author SHA1 Message Date
ManuelW77 028fe85586 docs: update platformio.ini for version v3.4.6 2026-08-21 15:50:02 +02:00
ManuelW77andRaul Santamaria 27e16c3d1b fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 15:48:52 +02:00
ManuelW77 6f9c99edb6 fix(config): restore ESP32 Dev Board pin numbers, gate S3 pins behind CONFIG_IDF_TARGET_ESP32S3
PR #14 (0f43f22) unconditionally replaced the classic ESP32 Dev Board
pin numbers for PN532 (NFC), HX711 (scale) and TTP223 (touch) with the
ESP32-S3 values in the single shared src/config.cpp, even though the
esp32dev build environment (used for all standard-hardware releases)
still links against it unchanged. This caused nfc.begin() to talk to
the wrong physical pins on ESP32 Dev Board hardware, producing a
watchdog reset during NFC init and a subsequent bootloop.

Verified via objdump on both compiled config.cpp.o that esp32dev now
resolves to 32/33/16/17/25 and esp32-s3-devkitc-1 to 15/16/19/20/7.
2026-08-21 15:46:04 +02:00
3 changed files with 33 additions and 6 deletions

No files matched your search

+1 -1
View File
@@ -9,7 +9,7 @@
; https://docs.platformio.org/page/projectconf.html
[common]
version = "3.4.5"
version = "3.4.6"
to_old_version = "3.4.0"
[env:esp32dev]
+19 -5
View File
@@ -6,21 +6,35 @@
//#define PN532_MOSI 23
//#define PN532_SS 5
//#define PN532_MISO 19
const uint8_t PN532_IRQ = 15; //32 for ESP32 Dev, 15 for ESP32-S3;
const uint8_t PN532_RESET = 16; //33 for ESP32 Dev, 16 for ESP32-S3;
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t PN532_IRQ = 15;
const uint8_t PN532_RESET = 16;
#else
const uint8_t PN532_IRQ = 32;
const uint8_t PN532_RESET = 33;
#endif
// ***** PN532
// ***** HX711 (Waage)
// HX711 circuit wiring
const uint8_t LOADCELL_DOUT_PIN = 19; //16 for ESP32 Dev, 19 for ESP32-S3;
const uint8_t LOADCELL_SCK_PIN = 20; //17 for ESP32 Dev, 20 for ESP32-S3;
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t LOADCELL_DOUT_PIN = 19;
const uint8_t LOADCELL_SCK_PIN = 20;
#else
const uint8_t LOADCELL_DOUT_PIN = 16;
const uint8_t LOADCELL_SCK_PIN = 17;
#endif
const uint8_t calVal_eepromAdress = 0;
const uint16_t SCALE_LEVEL_WEIGHT = 500;
// ***** HX711
// ***** TTP223 (Touch Sensor)
// TTP223 circuit wiring
const uint8_t TTP223_PIN = 7; //25 for ESP32 Dev, 7 for ESP32-S3;
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t TTP223_PIN = 7;
#else
const uint8_t TTP223_PIN = 25;
#endif
// ***** TTP223
+13
View File
@@ -13,6 +13,17 @@
//Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, PN532_SS);
Adafruit_PN532 nfc(PN532_IRQ, PN532_RESET);
// Adafruit_PN532::begin() toggles RSTPDN too briefly (~1ms/2ms) for some PN532
// modules to reliably leave powerdown, which then makes getFirmwareVersion()
// return 0 right after begin(). Pulse it explicitly with more margin first.
static void pulsePn532Reset() {
pinMode(PN532_RESET, OUTPUT);
digitalWrite(PN532_RESET, LOW);
delay(50);
digitalWrite(PN532_RESET, HIGH);
delay(200);
}
TaskHandle_t RfidReaderTask;
// AsyncWebServerRequest* volatile activeNfcWriteRequest = nullptr; // Removed
SemaphoreHandle_t nfcRequestMutex = NULL;
@@ -561,6 +572,7 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
Serial.println("1. Neuinitialisierung des PN532...");
// Reinitialize the PN532
pulsePn532Reset();
nfc.begin();
vTaskDelay(pdMS_TO_TICKS(500)); // Give it time to initialize
@@ -2335,6 +2347,7 @@ void scanRfidTask(void * parameter) {
void startNfc() {
nfcRequestMutex = xSemaphoreCreateMutex();
oledShowProgressBar(4, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_NFC_INIT));
pulsePn532Reset();
nfc.begin(); // Beginne Kommunikation mit RFID Leser
delay(1000);