Compare commits

..
42 Commits
Author SHA1 Message Date
ManuelW77 028fe85586 docs: update platformio.ini for version v3.4.6 2026-08-21 15:50:02 +02:00
ManuelW77andRaul Santamaria 27e16c3d1b fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 15:48:52 +02:00
ManuelW77 6f9c99edb6 fix(config): restore ESP32 Dev Board pin numbers, gate S3 pins behind CONFIG_IDF_TARGET_ESP32S3
PR #14 (0f43f22) unconditionally replaced the classic ESP32 Dev Board
pin numbers for PN532 (NFC), HX711 (scale) and TTP223 (touch) with the
ESP32-S3 values in the single shared src/config.cpp, even though the
esp32dev build environment (used for all standard-hardware releases)
still links against it unchanged. This caused nfc.begin() to talk to
the wrong physical pins on ESP32 Dev Board hardware, producing a
watchdog reset during NFC init and a subsequent bootloop.

Verified via objdump on both compiled config.cpp.o that esp32dev now
resolves to 32/33/16/17/25 and esp32-s3-devkitc-1 to 15/16/19/20/7.
2026-08-21 15:46:04 +02:00
ManuelW77 a7b97dc0c9 docs: update platformio.ini for version v3.4.5 2026-08-21 15:12:12 +02:00
ManuelW77 2bae0369fa docs: update platformio.ini for version v3.4.4 2026-08-20 12:43:04 +02:00
ManuelW77 1c3aae5f49 update: increment version to 3.4.3 in platformio.ini 2026-08-20 12:42:57 +02:00
ManuelW77 4054a96067 merge: sync devel with main
devel was 16 commits behind main and had diverged with the
esp32-s3-devkitc-1 board support (PR #14) that never made it back to
main. Merges main into devel so both stay on the same feature/fix
baseline; resolves the platformio.ini conflict by keeping devel's
shared [env] section (used by both esp32dev and esp32-s3-devkitc-1)
and carrying forward main's AsyncTCP watchdog fix
(-DCONFIG_ASYNC_TCP_USE_WDT=0).
2026-08-20 09:32:41 +02:00
ManuelW77 f6b6df55c8 docs: update platformio.ini for version v3.4.2 2026-08-12 10:18:20 +02:00
ManuelW77 f3426119e8 fix: update JSON handling to support spool_id and sm_id interchangeably 2026-08-12 10:14:35 +02:00
Manuel Weiser dd508e2e1e fix: update release flow 2026-08-09 16:04:09 +02:00
Manuel Weiser 0ab3db5f2d update version 2026-08-09 15:37:24 +02:00
Manuel Weiser f86d71f8b2 docs: update platformio.ini for beta version v3.4.0-beta1 2026-05-28 19:43:01 +02:00
Manuel Weiser b2ac1e9fcd Merge branch 'devel' 2026-05-28 19:42:53 +02:00
Manuel Weiser f2c1d44f5a chore: update version to 3.4.0 in platformio.ini 2026-05-28 19:42:15 +02:00
Manuel Weiser 3c9a0f17ba docs: update platformio.ini for beta version v3.3.2-beta1 2026-05-28 19:37:26 +02:00
Manuel Weiser 6a9acb9d27 feat: implement scan request handling with timeout and error reporting 2026-05-28 18:58:10 +02:00
Manuel Weiser 9b93d219f9 fix: skip fast-path detection for known spools when a scan request is active 2026-05-28 18:26:08 +02:00
Manuel Weiser f3f51cd6f8 fix: disable WiFiManager auto-reconnect to prevent connection storms 2026-05-28 17:48:42 +02:00
Manuel Weiser 9d3a3411fb feat: enhance RFID tag detection with NDEF support and improved error handling 2026-05-28 17:31:35 +02:00
Manuel Weiser 775700f90f feat: add tag data handling and scan request functionality 2026-05-28 17:04:24 +02:00
Manuel Weiser 9456e6ab91 feat: add support for extended-data tags with OpenSpool/FilaMan protocol 2026-05-28 16:28:13 +02:00
Manuel Weiser 30409a59e0 docs: update platformio.ini for version v3.3.2 2026-05-25 08:29:56 +02:00
Manuel Weiser 17f86a0094 feat: add package-lock.json and update WiFi settings for improved stability 2026-05-25 08:29:26 +02:00
ManuelW 0d38728072 Merge pull request #14 from KollegeChris/esp32-s3
Added configuration for esp32-s3
2026-05-19 11:09:07 +02:00
Christoph Stoiber 0f43f228e7 Added configuration for esp32-s3 2026-05-05 21:20:57 +02:00
ManuelW eb1c032444 Merge pull request #12 from anderl1969/feature/hw-detection
Documentation for NFC-only mode
2026-04-06 16:21:04 +02:00
anderl1969 696b8ba518 docs: German and English documentation for the NFC-only mode 2026-03-30 15:05:23 +02:00
anderl1969 728c40f0fa docs: images for NFC-only mode 2026-03-30 00:13:12 +02:00
anderl1969 d0d2dbb274 init NFC-only mode documentation
Added convenience note about using a small device for NFC-tag writing.
2026-03-30 00:10:55 +02:00
Manuel Weiser 4a377b25e0 fix: update version to 3.3.1 in platformio.ini 2026-03-29 19:51:37 +02:00
ManuelW 075459b890 Merge pull request #10 from anderl1969/feature/hw-detection
Feature/hw detection
2026-03-29 18:25:27 +02:00
anderl1969 bece16f012 feat: added boot text that informs about entering NFC mode w/o hx711 2026-03-29 17:04:57 +02:00
anderl1969 14fa6e7fd0 feat: added top-row icon for scale state 2026-03-29 16:28:19 +02:00
anderl1969 4daa74bbfb feat: NFC-only mode based on working hw detection for hx711 2026-03-29 15:54:54 +02:00
anderl1969 4b74bc8988 fix: added missing boot entries in stringTable 2026-03-29 14:49:28 +02:00
anderl1969 f09e552e3d chore: cleanup progress bar during setup 2026-03-29 13:56:29 +02:00
Manuel Weiser 6de2e8728c docs: update version in platformio.ini to 3.3.0 2026-03-29 10:55:53 +02:00
Manuel Weiser 60f08ea640 docs: update platformio.ini to version 3.2.8 and adjust old version reference 2026-03-29 10:48:04 +02:00
Manuel Weiser 7fdfc79a2a docs: update platformio.ini for beta version v3.2.7-beta1 2026-03-29 10:45:39 +02:00
Manuel Weiser 894d1d25dd Merge branch 'devel' 2026-03-29 10:45:29 +02:00
Manuel Weiser a3dd4b164e feat: implement template processor for dynamic HTML variable replacement and optimize static asset serving with caching 2026-03-29 10:44:22 +02:00
Manuel Weiser 0f8d3d470d feat: enhance WiFi stability and performance with async TCP optimizations and heartbeat retry logic 2026-03-29 10:13:46 +02:00
30 changed files with 1681 additions and 709 deletions

No files matched your search

+1 -1
View File
@@ -35,7 +35,7 @@ jobs:
gitea-release:
needs: detect-provider
if: needs.detect-provider.outputs.provider == 'gitea'
if: needs.detect-provider.outputs.provider == 'gitea' && !contains(github.ref_name, '-beta')
uses: ./.github/workflows/gitea-release.yml
secrets:
GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+380
View File
@@ -0,0 +1,380 @@
{
"name": ".opencode",
"lockfileVersion": 3,
"requires": true,
"packages": {
"": {
"dependencies": {
"@opencode-ai/plugin": "1.15.10"
}
},
"node_modules/@msgpackr-extract/msgpackr-extract-darwin-arm64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-darwin-arm64/-/msgpackr-extract-darwin-arm64-3.0.3.tgz",
"integrity": "sha512-QZHtlVgbAdy2zAqNA9Gu1UpIuI8Xvsd1v8ic6B2pZmeFnFcMWiPLfWXh7TVw4eGEZ/C9TH281KwhVoeQUKbyjw==",
"cpu": [
"arm64"
],
"license": "MIT",
"optional": true,
"os": [
"darwin"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-darwin-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-darwin-x64/-/msgpackr-extract-darwin-x64-3.0.3.tgz",
"integrity": "sha512-mdzd3AVzYKuUmiWOQ8GNhl64/IoFGol569zNRdkLReh6LRLHOXxU4U8eq0JwaD8iFHdVGqSy4IjFL4reoWCDFw==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"darwin"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-arm": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-arm/-/msgpackr-extract-linux-arm-3.0.3.tgz",
"integrity": "sha512-fg0uy/dG/nZEXfYilKoRe7yALaNmHoYeIoJuJ7KJ+YyU2bvY8vPv27f7UKhGRpY6euFYqEVhxCFZgAUNQBM3nw==",
"cpu": [
"arm"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-arm64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-arm64/-/msgpackr-extract-linux-arm64-3.0.3.tgz",
"integrity": "sha512-YxQL+ax0XqBJDZiKimS2XQaf+2wDGVa1enVRGzEvLLVFeqa5kx2bWbtcSXgsxjQB7nRqqIGFIcLteF/sHeVtQg==",
"cpu": [
"arm64"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-x64/-/msgpackr-extract-linux-x64-3.0.3.tgz",
"integrity": "sha512-cvwNfbP07pKUfq1uH+S6KJ7dT9K8WOE4ZiAcsrSes+UY55E/0jLYc+vq+DO7jlmqRb5zAggExKm0H7O/CBaesg==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-win32-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-win32-x64/-/msgpackr-extract-win32-x64-3.0.3.tgz",
"integrity": "sha512-x0fWaQtYp4E6sktbsdAqnehxDgEc/VwM7uLsRCYWaiGu0ykYdZPiS8zCWdnjHwyiumousxfBm4SO31eXqwEZhQ==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"win32"
]
},
"node_modules/@opencode-ai/plugin": {
"version": "1.15.10",
"resolved": "https://registry.npmjs.org/@opencode-ai/plugin/-/plugin-1.15.10.tgz",
"integrity": "sha512-V2p7CvpBtKWB+FID7Dl1y0Ci02zUT40A9b2RD9R9BOiuD8ZcKhHWov+irN0xVJA0Eg6OhEBfA0lPKRn1FNKPlw==",
"license": "MIT",
"dependencies": {
"@opencode-ai/sdk": "1.15.10",
"effect": "4.0.0-beta.66",
"zod": "4.1.8"
},
"peerDependencies": {
"@opentui/core": ">=0.2.15",
"@opentui/keymap": ">=0.2.15",
"@opentui/solid": ">=0.2.15"
},
"peerDependenciesMeta": {
"@opentui/core": {
"optional": true
},
"@opentui/keymap": {
"optional": true
},
"@opentui/solid": {
"optional": true
}
}
},
"node_modules/@opencode-ai/sdk": {
"version": "1.15.10",
"resolved": "https://registry.npmjs.org/@opencode-ai/sdk/-/sdk-1.15.10.tgz",
"integrity": "sha512-CUhpmMGGOqzvPnNNjjWmEIodAfP6Qnuki2ChIUKWYF7UImZ4zUcMZnzO5BtUxu/Ni1P8qzWxDioXs+7aIZQEhA==",
"license": "MIT",
"dependencies": {
"cross-spawn": "7.0.6"
}
},
"node_modules/@standard-schema/spec": {
"version": "1.1.0",
"resolved": "https://registry.npmjs.org/@standard-schema/spec/-/spec-1.1.0.tgz",
"integrity": "sha512-l2aFy5jALhniG5HgqrD6jXLi/rUWrKvqN/qJx6yoJsgKhblVd+iqqU4RCXavm/jPityDo5TCvKMnpjKnOriy0w==",
"license": "MIT"
},
"node_modules/cross-spawn": {
"version": "7.0.6",
"resolved": "https://registry.npmjs.org/cross-spawn/-/cross-spawn-7.0.6.tgz",
"integrity": "sha512-uV2QOWP2nWzsy2aMp8aRibhi9dlzF5Hgh5SHaB9OiTGEyDTiJJyx0uy51QXdyWbtAHNua4XJzUKca3OzKUd3vA==",
"license": "MIT",
"dependencies": {
"path-key": "^3.1.0",
"shebang-command": "^2.0.0",
"which": "^2.0.1"
},
"engines": {
"node": ">= 8"
}
},
"node_modules/detect-libc": {
"version": "2.1.2",
"resolved": "https://registry.npmjs.org/detect-libc/-/detect-libc-2.1.2.tgz",
"integrity": "sha512-Btj2BOOO83o3WyH59e8MgXsxEQVcarkUOpEYrubB0urwnN10yQ364rsiByU11nZlqWYZm05i/of7io4mzihBtQ==",
"license": "Apache-2.0",
"optional": true,
"engines": {
"node": ">=8"
}
},
"node_modules/effect": {
"version": "4.0.0-beta.66",
"resolved": "https://registry.npmjs.org/effect/-/effect-4.0.0-beta.66.tgz",
"integrity": "sha512-4arEr62cziFa8BBVDUwJCJJmaVepXf/kRg7KtC0h8+bufngscrHbwWFhr9c+HonwOF+31U3iD3xUJmw9KzX7Dw==",
"license": "MIT",
"dependencies": {
"@standard-schema/spec": "^1.1.0",
"fast-check": "^4.6.0",
"find-my-way-ts": "^0.1.6",
"ini": "^6.0.0",
"kubernetes-types": "^1.30.0",
"msgpackr": "^1.11.9",
"multipasta": "^0.2.7",
"toml": "^4.1.1",
"uuid": "^13.0.0",
"yaml": "^2.8.3"
}
},
"node_modules/fast-check": {
"version": "4.8.0",
"resolved": "https://registry.npmjs.org/fast-check/-/fast-check-4.8.0.tgz",
"integrity": "sha512-GOJ158CUMnN6cSahsv4+ExARvIDuzzinFjkp0E9WtiBa5zcVeLozVkWaE4IzFcc+Y48Wp1EDlUZsXRyAztQcSg==",
"funding": [
{
"type": "individual",
"url": "https://github.com/sponsors/dubzzz"
},
{
"type": "opencollective",
"url": "https://opencollective.com/fast-check"
}
],
"license": "MIT",
"dependencies": {
"pure-rand": "^8.0.0"
},
"engines": {
"node": ">=12.17.0"
}
},
"node_modules/find-my-way-ts": {
"version": "0.1.6",
"resolved": "https://registry.npmjs.org/find-my-way-ts/-/find-my-way-ts-0.1.6.tgz",
"integrity": "sha512-a85L9ZoXtNAey3Y6Z+eBWW658kO/MwR7zIafkIUPUMf3isZG0NCs2pjW2wtjxAKuJPxMAsHUIP4ZPGv0o5gyTA==",
"license": "MIT"
},
"node_modules/ini": {
"version": "6.0.0",
"resolved": "https://registry.npmjs.org/ini/-/ini-6.0.0.tgz",
"integrity": "sha512-IBTdIkzZNOpqm7q3dRqJvMaldXjDHWkEDfrwGEQTs5eaQMWV+djAhR+wahyNNMAa+qpbDUhBMVt4ZKNwpPm7xQ==",
"license": "ISC",
"engines": {
"node": "^20.17.0 || >=22.9.0"
}
},
"node_modules/isexe": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/isexe/-/isexe-2.0.0.tgz",
"integrity": "sha512-RHxMLp9lnKHGHRng9QFhRCMbYAcVpn69smSGcq3f36xjgVVWThj4qqLbTLlq7Ssj8B+fIQ1EuCEGI2lKsyQeIw==",
"license": "ISC"
},
"node_modules/kubernetes-types": {
"version": "1.30.0",
"resolved": "https://registry.npmjs.org/kubernetes-types/-/kubernetes-types-1.30.0.tgz",
"integrity": "sha512-Dew1okvhM/SQcIa2rcgujNndZwU8VnSapDgdxlYoB84ZlpAD43U6KLAFqYo17ykSFGHNPrg0qry0bP+GJd9v7Q==",
"license": "Apache-2.0"
},
"node_modules/msgpackr": {
"version": "1.11.12",
"resolved": "https://registry.npmjs.org/msgpackr/-/msgpackr-1.11.12.tgz",
"integrity": "sha512-RBdJ1Un7yGlXWajrkxcSa93nvQ0w4zBf60c0yYv7YtBelP8H2FA7XsfBbMHtXKXUMUxH7zV3Zuozh+kUQWhHvg==",
"license": "MIT",
"optionalDependencies": {
"msgpackr-extract": "^3.0.2"
}
},
"node_modules/msgpackr-extract": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/msgpackr-extract/-/msgpackr-extract-3.0.3.tgz",
"integrity": "sha512-P0efT1C9jIdVRefqjzOQ9Xml57zpOXnIuS+csaB4MdZbTdmGDLo8XhzBG1N7aO11gKDDkJvBLULeFTo46wwreA==",
"hasInstallScript": true,
"license": "MIT",
"optional": true,
"dependencies": {
"node-gyp-build-optional-packages": "5.2.2"
},
"bin": {
"download-msgpackr-prebuilds": "bin/download-prebuilds.js"
},
"optionalDependencies": {
"@msgpackr-extract/msgpackr-extract-darwin-arm64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-darwin-x64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-arm": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-arm64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-x64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-win32-x64": "3.0.3"
}
},
"node_modules/multipasta": {
"version": "0.2.7",
"resolved": "https://registry.npmjs.org/multipasta/-/multipasta-0.2.7.tgz",
"integrity": "sha512-KPA58d68KgGil15oDqXjkUBEBYc00XvbPj5/X+dyzeo/lWm9Nc25pQRlf1D+gv4OpK7NM0J1odrbu9JNNGvynA==",
"license": "MIT"
},
"node_modules/node-gyp-build-optional-packages": {
"version": "5.2.2",
"resolved": "https://registry.npmjs.org/node-gyp-build-optional-packages/-/node-gyp-build-optional-packages-5.2.2.tgz",
"integrity": "sha512-s+w+rBWnpTMwSFbaE0UXsRlg7hU4FjekKU4eyAih5T8nJuNZT1nNsskXpxmeqSK9UzkBl6UgRlnKc8hz8IEqOw==",
"license": "MIT",
"optional": true,
"dependencies": {
"detect-libc": "^2.0.1"
},
"bin": {
"node-gyp-build-optional-packages": "bin.js",
"node-gyp-build-optional-packages-optional": "optional.js",
"node-gyp-build-optional-packages-test": "build-test.js"
}
},
"node_modules/path-key": {
"version": "3.1.1",
"resolved": "https://registry.npmjs.org/path-key/-/path-key-3.1.1.tgz",
"integrity": "sha512-ojmeN0qd+y0jszEtoY48r0Peq5dwMEkIlCOu6Q5f41lfkswXuKtYrhgoTpLnyIcHm24Uhqx+5Tqm2InSwLhE6Q==",
"license": "MIT",
"engines": {
"node": ">=8"
}
},
"node_modules/pure-rand": {
"version": "8.4.0",
"resolved": "https://registry.npmjs.org/pure-rand/-/pure-rand-8.4.0.tgz",
"integrity": "sha512-IoM8YF/jY0hiugFo/wOWqfmarlE6J0wc6fDK1PhftMk7MGhVZl88sZimmqBBFomLOCSmcCCpsfj7wXASCpvK9A==",
"funding": [
{
"type": "individual",
"url": "https://github.com/sponsors/dubzzz"
},
{
"type": "opencollective",
"url": "https://opencollective.com/fast-check"
}
],
"license": "MIT"
},
"node_modules/shebang-command": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/shebang-command/-/shebang-command-2.0.0.tgz",
"integrity": "sha512-kHxr2zZpYtdmrN1qDjrrX/Z1rR1kG8Dx+gkpK1G4eXmvXswmcE1hTWBWYUzlraYw1/yZp6YuDY77YtvbN0dmDA==",
"license": "MIT",
"dependencies": {
"shebang-regex": "^3.0.0"
},
"engines": {
"node": ">=8"
}
},
"node_modules/shebang-regex": {
"version": "3.0.0",
"resolved": "https://registry.npmjs.org/shebang-regex/-/shebang-regex-3.0.0.tgz",
"integrity": "sha512-7++dFhtcx3353uBaq8DDR4NuxBetBzC7ZQOhmTQInHEd6bSrXdiEyzCvG07Z44UYdLShWUyXt5M/yhz8ekcb1A==",
"license": "MIT",
"engines": {
"node": ">=8"
}
},
"node_modules/toml": {
"version": "4.1.1",
"resolved": "https://registry.npmjs.org/toml/-/toml-4.1.1.tgz",
"integrity": "sha512-EBJnVBr3dTXdA89WVFoAIPUqkBjxPMwRqsfuo1r240tKFHXv3zgca4+NJib/h6TyvGF7vOawz0jGuryJCdNHrw==",
"license": "MIT",
"engines": {
"node": ">=20"
}
},
"node_modules/uuid": {
"version": "13.0.2",
"resolved": "https://registry.npmjs.org/uuid/-/uuid-13.0.2.tgz",
"integrity": "sha512-vzi9uRZ926x4XV73S/4qQaTwPXM2JBj6/6lI/byHH1jOpCzb0zDbfytgA9LcN/hzb2l7WQSQnxITOVx5un/wGw==",
"funding": [
"https://github.com/sponsors/broofa",
"https://github.com/sponsors/ctavan"
],
"license": "MIT",
"bin": {
"uuid": "dist-node/bin/uuid"
}
},
"node_modules/which": {
"version": "2.0.2",
"resolved": "https://registry.npmjs.org/which/-/which-2.0.2.tgz",
"integrity": "sha512-BLI3Tl1TW3Pvl70l3yq3Y64i+awpwXqsGBYWkkqMtnbXgrMD+yj7rhW0kuEDxzJaYXGjEW5ogapKNMEKNMjibA==",
"license": "ISC",
"dependencies": {
"isexe": "^2.0.0"
},
"bin": {
"node-which": "bin/node-which"
},
"engines": {
"node": ">= 8"
}
},
"node_modules/yaml": {
"version": "2.9.0",
"resolved": "https://registry.npmjs.org/yaml/-/yaml-2.9.0.tgz",
"integrity": "sha512-2AvhNX3mb8zd6Zy7INTtSpl1F15HW6Wnqj0srWlkKLcpYl/gMIMJiyuGq2KeI2YFxUPjdlB+3Lc10seMLtL4cA==",
"license": "ISC",
"bin": {
"yaml": "bin.mjs"
},
"engines": {
"node": ">= 14.6"
},
"funding": {
"url": "https://github.com/sponsors/eemeli"
}
},
"node_modules/zod": {
"version": "4.1.8",
"license": "MIT",
"funding": {
"url": "https://github.com/sponsors/colinhacks"
}
}
}
}
+13 -12
View File
@@ -2,17 +2,18 @@
⚠️ **Wichtig: Ab Version 3.0.0 erfordert dieses System das [FilaMan-System](https://github.com/Fire-Devils/filaman-system) Backend. Frühere direkte Integrationen (Spoolman, MQTT, Bambu Lab) wurden in das zentrale FilaMan-System verschoben.**
FilaMan ist ein Werkzeug zur Filamentverwaltung für den 3D-Druck. Es verwendet ESP32-Hardware zur Gewichtsmessung und Verwaltung von NFC-Tags.
Benutzer können Filamentspulen verwalten und das Gerät über eine Weboberfläche konfigurieren.
FilaMan ist ein Werkzeug zur Filamentverwaltung für den 3D-Druck. Es verwendet ESP32-Hardware zur Gewichtsmessung und Verwaltung von NFC-Tags.
Benutzer können Filamentspulen verwalten und das Gerät über eine Weboberfläche konfigurieren.
Das System integriert sich nahtlos in das [FilaMan-System](https://github.com/Fire-Devils/filaman-system).
**NEU ab 3.3.1:** Eine abgespeckte Version ohne Waage ist ebenfalls möglich. Details finden sich unter [NFC-only Modus](docs/NFC-only_mode_de.md).
![Waage](./img/scale_trans.png)
Weitere Bilder finden Sie im [img Ordner](/img/)
oder auf meiner Website: [FilaMan Website](https://www.filaman.app)
Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Weitere Bilder finden Sie im [img Ordner](/img/)
oder auf meiner Website: [FilaMan Website](https://www.filaman.app)
Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Discord Server: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
## NEU: Recycling Fabrik
@@ -27,7 +28,7 @@ dass die Spulen automatisch erkannt und über die FilaMan-Waage direkt in das Fi
**Was ist die Recycling Fabrik?**
Die Recycling Fabrik ist ein deutsches Unternehmen, das sich der Entwicklung und Herstellung von nachhaltigem 3D-Druck-Filament verschrieben hat.
Die Recycling Fabrik ist ein deutsches Unternehmen, das sich der Entwicklung und Herstellung von nachhaltigem 3D-Druck-Filament verschrieben hat.
Ihre Filamente bestehen zu 100 % aus recyceltem Material von Endkunden und aus der Industrie – für eine umweltbewusste und ressourcenschonende Zukunft.
Weitere Informationen und Produkte finden Sie hier: [www.recyclingfabrik.com](https://www.recyclingfabrik.com)
@@ -45,7 +46,7 @@ Weitere Informationen und Produkte finden Sie hier: [www.recyclingfabrik.com](ht
### Weboberflächen-Features
- **Echtzeit-Updates:** WebSocket-Verbindung für Live-Datenaktualisierungen.
- **NFC-Tag-Verwaltung:**
- **NFC-Tag-Verwaltung:**
- Schreiben von Filamentdaten auf NFC-Tags.
- Unterstützt automatische Spulenerkennung in kompatiblen Systemen.
- **FilaMan-System Integration:**
@@ -122,7 +123,7 @@ Wenn Sie einen Hersteller-NFC-Tag zum ersten Mal scannen:
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
**!! Stellen Sie sicher, dass die DIP-Schalter am PN532 auf I2C eingestellt sind.**
**!! Stellen Sie sicher, dass die DIP-Schalter am PN532 auf I2C eingestellt sind.**
**Verwenden Sie den 3V-Pin des ESP für den Touch-Sensor.**
![Verkabelung](./img/Schaltplan.png)
@@ -130,10 +131,10 @@ Wenn Sie einen Hersteller-NFC-Tag zum ersten Mal scannen:
![meineVerkabelung](./img/IMG_2589.jpeg)
![meineVerkabelung](./img/IMG_2590.jpeg)
*Die Wägezelle wird an die meisten HX711-Module wie folgt angeschlossen:
E+ rot
E- schwarz
A- weiß
*Die Wägezelle wird an die meisten HX711-Module wie folgt angeschlossen:
E+ rot
E- schwarz
A- weiß
A+ grün*
## Software-Abhängigkeiten
+13 -12
View File
@@ -2,17 +2,18 @@
⚠️ **Important: Starting with v3.0.0, this system requires the [FilaMan-System](https://github.com/Fire-Devils/filaman-system) backend. Previous direct integrations (Spoolman, MQTT, Bambu Lab) have been moved to the central FilaMan-System.**
FilaMan is a filament management tool for 3D printing. It uses ESP32 hardware for weight measurement and NFC tag management.
Users can manage filament spools and configure the device via a web interface.
FilaMan is a filament management tool for 3D printing. It uses ESP32 hardware for weight measurement and NFC tag management.
Users can manage filament spools and configure the device via a web interface.
The system integrates seamlessly with the [FilaMan-System](https://github.com/Fire-Devils/filaman-system).
**NEW since 3.3.1:** A reduced version w/o scale is also available. Details can be found in [NFC-only mode](docs/NFC-only_mode_en.md).
![Scale](./img/scale_trans.png)
More Images can be found in the [img Folder](/img/)
or my website: [FilaMan Website](https://www.filaman.app)
german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
More Images can be found in the [img Folder](/img/)
or my website: [FilaMan Website](https://www.filaman.app)
german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Discord Server: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
## NEW: Recycling Fabrik
@@ -27,7 +28,7 @@ that the spools can be automatically recognized and imported into the FilaMan-Sy
**What is Recycling Fabrik?**
Recycling Fabrik is a German company dedicated to developing and manufacturing sustainable 3D printing filament.
Recycling Fabrik is a German company dedicated to developing and manufacturing sustainable 3D printing filament.
Their filaments are made from 100% recycled material from both end customers and industry – for an environmentally conscious and resource-saving future.
More information and products can be found here: [www.recyclingfabrik.com](https://www.recyclingfabrik.com)
@@ -45,7 +46,7 @@ More information and products can be found here: [www.recyclingfabrik.com](https
### Web Interface Features
- **Real-time Updates:** WebSocket connection for live data updates.
- **NFC Tag Management:**
- **NFC Tag Management:**
- Write filament data to NFC tags.
- Supports automatic Spool detection in compatible systems.
- **FilaMan-System Integration:**
@@ -122,7 +123,7 @@ When you scan a manufacturer NFC tag for the first time:
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
**!! Make sure that the DIP switches on the PN532 are set to I2C**
**!! Make sure that the DIP switches on the PN532 are set to I2C**
**Use the 3V pin from the ESP for the touch sensor**
![Wiring](./img/Schaltplan.png)
@@ -130,10 +131,10 @@ When you scan a manufacturer NFC tag for the first time:
![myWiring](./img/IMG_2589.jpeg)
![myWiring](./img/IMG_2590.jpeg)
*The load cell is connected to most HX711 modules as follows:
E+ red
E- black
A- white
*The load cell is connected to most HX711 modules as follows:
E+ red
E- black
A- white
A+ green*
## Software Dependencies
+2 -2
View File
@@ -41,11 +41,11 @@
<div class="fm-card">
<h2>System Registration</h2>
<p>Current Status: <strong style="color: var(--accent);">{{registered}}</strong></p>
<p>Current Status: <strong style="color: var(--accent);">%registered%</strong></p>
<div class="fm-form-group" style="margin-top: 2rem;">
<label class="fm-label" for="filamanUrl">FilaMan API URL</label>
<input type="text" id="filamanUrl" class="fm-input" value="{{filamanUrl}}" placeholder="e.g. http://192.168.1.10:8000">
<input type="text" id="filamanUrl" class="fm-input" value="%filamanUrl%" placeholder="e.g. http://192.168.1.10:8000">
</div>
<div class="fm-form-group">
+1 -1
View File
@@ -46,7 +46,7 @@
<button id="tareBtn" class="fm-btn fm-btn-outline">Tare Scale</button>
<label class="status-pill" style="display: flex; align-items: center; gap: 0.5rem; cursor: pointer;">
<input type="checkbox" id="autoTareCheckbox" onchange="setAutoTare(this.checked);" {{autoTare}}>
<input type="checkbox" id="autoTareCheckbox" onchange="setAutoTare(this.checked);" %autoTare%>
<span>Enable Auto-TARE</span>
</label>
</div>
+70
View File
@@ -0,0 +1,70 @@
# NFC-only Modus
## Beschreibung
Es kann praktisch sein, ein kleines Gerät in der Nähe deines Desktop-Computers zu haben, wenn du neue Spulen in deine Datenbank hinzufügst.
So kannst du sofort NFC-Tags für sie schreiben. Da keine Waage erforderlich ist (das Gewicht einer neuen Spule ist in der Regel bekannt), ist es sinnvoll, auf diese Funktion zu verzichten, um einen kleineren Formfaktor zu erreichen.
![FilaLite_no_scale](../img/FilaLite_no_scale.png)
## Bedienung
Bevor du das NFC-only Terminal verwenden kannst, musst du es in der `FilaMan System App` registrieren, wie bei jeder anderen Waage auch.
### Tag schreiben
Hauptzweck ist das Schreiben neuer NFC-Tags.
Du startest den Schreibvorgang in der `FilaMan System App` (Web-GUI). Dann wählst du dein NFC-Gerät aus und folgst den Anweisungen auf dem Display.
### Tag lesen
Das Gerät kann Tags zwar lesen, sinnvolle Anwendungsfälle sind jedoch ohne Waage eingeschränkt.
Du kannst trotzdem eine Spule identifizieren und ihr einen Standort mit dem entsprechenden Standort-Tag zuweisen.
Aber ehrlich gesagt: der Hauptzweck des NFC-only Gerätes ist **TAG SCHREIBEN**.
## NFC-only Modus
Beim Start versucht der ESP32, den HX711 (Verstärker) zusammen mit einem angeschlossenen Loadcell-Sensor zu erkennen. Wenn das gelingt, startet er im Normalmodus mit voller Funktionalität.
Andernfalls schaltet er in den **NFC-only Modus**!
Statt einer Gewichtsanzeige zeigt das Display eine Bereitschaftsmeldung. Zusätzlich ist das Waagensymbol in der oberen Zeile durchgestrichen.
![Ready Prompt](../img/no_scale_ready.png)
## Aufbau / Installation
### Hardware
Die Verkabelung der Hardware ist gleich wie bei der originalen, voll ausgestatteten FilaMan-Waage. Es gibt nur 3 Unterschiede:
- Kein HX711 angeschlossen (und natürlich keine Loadcell)
- Kein Tastensensor (ohne Waage ist kein Tarieren nötig)
- optional: 10k Pull-up-Widerstand an Pin 16 (RX2)
Der Pull-up-Widerstand ist nicht zwingend erforderlich, erhöht aber die Zuverlässigkeit beim Erkennen eines fehlenden HX711. Ohne Pull-up-Widerstand sollte es aber ebenfalls funktionieren.
![Schaltplan mit Pull-Up](../img/Schaltplan%20NFC-only%20pullup.png)
| Komponente | ESP32 Pin |
| ---- | ---- |
| 10k Pull-up | 16 |
| | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
#### PN532
- **!! Stelle sicher, dass die DIP-Schalter des PN532 auf I2C gestellt sind**
- Verbinde `VCC` mit 5V
#### OLED
- Verbinde `VCC` mit 3,3V
#### 10k Widerstand (optional)
- Verbinde den Widerstand mit PIN 16 (wo normalerweise der DOUT des HX711 angeschlossen wäre) und 5V
### Software
Folge den Anweisungen in der [Hauptdokumentation](../README.de.md#schritt-für-schritt-installation).
Du benötigst Version 3.3.1 oder neuer für eine funktionierende Hardware-Erkennung und den NFC-only Modus.
+76
View File
@@ -0,0 +1,76 @@
# NFC-only mode
## Description
It may be convenient to have a small device near your desktop computer when adding new spools to your database.
So you are able to write NFC-tags for them right away. Since there is no need for a scale (the weight of a new
spool should be well known), it is pleasant to leave the scale functionality out in advance of a smaller footprint.
![FilaLite_no_scale](../img/FilaLite_no_scale.png)
## Usage
Before you can use the NFC-only device, you have to register it to your FilaMan System App as
you would do with any regular scale device.
### Tag Writing
Its main purpose is to write new NFC tags.
You start the writing process from within the FilaMan System App (Web GUI). You than select
your NFC device and follow the instructions on the device display.
### Tag Reading
Although the device is fully capable of tag reading, its use cases are limited due to the lack of a scale.
But you can still identify a spool and assign it to a location with the according location tag.
But to be honest: the main purpose of the NFC-only device is **TAG WRITING**.
## NFC-only mode
During startup, the ESP32 tries to detect the HX711 (amplifier) together with a connected
loadcell sensor. If successful it starts into normal mode with full functionality.
Otherwise it switches in **NFC-only mode!**
Instead of a weight reading the display shows a ready prompts. Additionally the scale icon
in the top row is crossed out.
![Ready Prompt](../img/no_scale_ready.png)
## Build / Installation
### Hardware
The wiring of the hardware is the same as the original, fully equipped FilaMan scale. There are only 3 differences:
- No HX711 connected (also no loadcell of course)
- No touch sensor (without scale there is no need to tare)
- optional: 10k pull-up resistor on Pin 16 (RX2)
The pull-up resistor is not mandatory, but for good measure. It makes it more reliable to
detect a missing hx711. But it should also work w/o the pull-up resistor.
![Schaltplan mit Pull-Up](../img/Schaltplan%20NFC-only%20pullup.png)
| Component | ESP32 Pin |
| ---- | ---- |
| 10k pull-up | 16 |
| | 17 |
| OLED SDA | 21 |
| OLED SCL. | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
#### PN532
- !! Make sure that the DIP switches on the PN532 are set to I2C
- Connect `VCC` to 5V
#### OLED
- Connect `VCC` to 3.3V
#### 10k Resistor (optional)
- Connect to PIN 16 (where normally the DOUT of the HX711 would connect to) and 5V
### Software
Follow the instructions in the [main readme](../README.md#step-by-step-installation).
You need version 3.3.1 or later for a working hardware recognition and NFC-only mode.
Binary file not shown.
Binary file not shown.

After

Width:  |  Height:  |  Size: 1.4 MiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 205 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 59 KiB

+53 -45
View File
@@ -9,61 +9,69 @@
; https://docs.platformio.org/page/projectconf.html
[common]
version = "3.2.7"
to_old_version = "3.0.9"
version = "3.4.6"
to_old_version = "3.4.0"
##
[env:esp32dev]
platform = espressif32@^6.0.0
board = esp32dev
framework = arduino
monitor_speed = 115200
#monitor_port = /dev/cu.usbmodem01
lib_deps =
tzapu/WiFiManager @ ^2.0.17
https://github.com/me-no-dev/ESPAsyncWebServer.git#master
https://github.com/esphome/AsyncTCP.git
bogde/HX711 @ ^0.7.5
adafruit/Adafruit SSD1306 @ ^2.5.13
adafruit/Adafruit GFX Library @ ^1.11.11
adafruit/Adafruit PN532 @ ^1.3.3
bblanchon/ArduinoJson @ ^7.3.0
knolleary/PubSubClient @ ^2.8
digitaldragon/SSLClient @ ^1.3.2
; Enable SPIFFS upload
board_build.filesystem = littlefs
; Update partition settings
board_build.partitions = partitions.csv
board_upload.flash_size = 4MB
board_build.flash_mode = dio
board_upload.flash_freq = "40m"
build_flags =
-Os
-ffunction-sections
-fdata-sections
#-DNDEBUG
-mtext-section-literals
-DVERSION=\"${common.version}\"
-DTOOLDVERSION=\"${common.to_old_version}\"
#-DENABLE_HEAP_DEBUGGING
-DASYNCWEBSERVER_REGEX
#-DCORE_DEBUG_LEVEL=3
-DCONFIG_ARDUHAL_LOG_COLORS=1
#-DOTA_DEBUG=1
-DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-DBOOT_APP_PARTITION_OTA_0=1
-DCONFIG_LWIP_TCP_MSL=60000
-DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=4096
-DCONFIG_LWIP_MAX_ACTIVE_TCP=16
-DCONFIG_ASYNC_TCP_RUNNING_CORE=0
-DCONFIG_ASYNC_TCP_USE_WDT=0
extra_scripts =
scripts/extra_script.py
extra_scripts = scripts/extra_script.py
[platformio]
default_envs = esp32dev
default_envs =
esp32dev
esp32-s3-devkitc-1
[env]
build_flags =
-Os
-ffunction-sections
-fdata-sections
-mtext-section-literals
-DVERSION=\"${common.version}\"
-DTOOLDVERSION=\"${common.to_old_version}\"
-DASYNCWEBSERVER_REGEX
-DCONFIG_ARDUHAL_LOG_COLORS=1
-DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-DBOOT_APP_PARTITION_OTA_0=1
-DCONFIG_ASYNC_TCP_RUNNING_CORE=1
-DCONFIG_ASYNC_TCP_MAX_ACK_TIME=10000
-DCONFIG_ASYNC_TCP_QUEUE_SIZE=128
-DCONFIG_ASYNC_TCP_STACK_SIZE=8192
-DCONFIG_ASYNC_TCP_PRIORITY=10
# WDT für AsyncTCP deaktiviert: Mit aktivem WDT konnten langsame
# WebSocket-Sender (z. B. große ws.textAll-JSONs) den AsyncTCP-Task
# killen und so alle Clients abwerfen.
-DCONFIG_ASYNC_TCP_USE_WDT=0
-DCONFIG_LWIP_TCP_MSL=30000
-DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=8192
-DCONFIG_LWIP_MAX_ACTIVE_TCP=16
lib_deps =
tzapu/WiFiManager
https://github.com/me-no-dev/ESPAsyncWebServer.git#master
https://github.com/esphome/AsyncTCP.git
bogde/HX711 @ ^0.7.5
adafruit/Adafruit SSD1306 @ ^2.5.13
adafruit/Adafruit GFX Library @ ^1.11.11
adafruit/Adafruit PN532 @ ^1.3.3
bblanchon/ArduinoJson @ ^7.3.0
knolleary/PubSubClient @ ^2.8
digitaldragon/SSLClient @ ^1.3.2
monitor_speed = 115200
[env:esp32-s3-devkitc-1]
board = esp32-s3-devkitc-1
framework = arduino
extra_scripts = scripts/extra_script.py
upload_protocol = esptool
board_build.flash_mode = dio
platform = espressif32
board_build.filesystem = littlefs
board_build.partitions = partitions.csv
board_upload.flash_size = 8MB
+72 -11
View File
@@ -80,10 +80,12 @@ bool registerDevice(const String& deviceCode) {
bool sendHeartbeat() {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(3000);
http.setTimeout(10000); // 10s statt 3s - wichtig für instabile Verbindungen
http.setReuse(true); // Keep-Alive aktivieren für bessere Performance
http.begin(filamanUrl + "/api/v1/devices/heartbeat");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive"); // Explizit Keep-Alive anfordern
JsonDocument doc;
doc["ip_address"] = WiFi.localIP().toString();
String payload;
@@ -94,6 +96,21 @@ bool sendHeartbeat() {
return filamanConnected;
}
// Heartbeat mit Retry-Logik für mehr Stabilität
bool sendHeartbeatWithRetry(int maxRetries = 2) {
for (int attempt = 0; attempt <= maxRetries; attempt++) {
if (sendHeartbeat()) {
return true;
}
if (attempt < maxRetries) {
Serial.printf("Heartbeat failed, retry %d/%d...\n", attempt + 1, maxRetries);
vTaskDelay(pdMS_TO_TICKS(1000)); // 1s warten vor Retry
}
}
Serial.println("Heartbeat failed after all retries");
return false;
}
bool sendWeight(int spoolId, String tagUuid, float measuredWeight) {
Serial.printf("sendWeight: sending to API - spoolId=%d, tagUuid=%s, weight=%.1f\n", spoolId, tagUuid.c_str(), measuredWeight);
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) {
@@ -101,10 +118,12 @@ bool sendWeight(int spoolId, String tagUuid, float measuredWeight) {
return false;
}
HTTPClient http;
http.setTimeout(3000);
http.setTimeout(10000); // 10s Timeout
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/scale/weight");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
// Only add spool_id if it's > 0 (for NTAG tags with spool ID)
// For Bambu tags (spoolId == 0), only send tag_uuid
@@ -117,7 +136,7 @@ bool sendWeight(int spoolId, String tagUuid, float measuredWeight) {
Serial.printf("API payload: %s\n", payload.c_str());
int httpCode = http.POST(payload);
Serial.printf("API response code: %d\n", httpCode);
if (httpCode == 200) {
String response = http.getString();
JsonDocument responseDoc;
@@ -138,7 +157,7 @@ bool sendWeight(int spoolId, String tagUuid, float measuredWeight) {
vTaskDelay(pdMS_TO_TICKS(2000));
oledClearPriority();
}
http.end();
return false;
}
@@ -146,10 +165,12 @@ bool sendWeight(int spoolId, String tagUuid, float measuredWeight) {
bool sendLocation(int spoolId, String spoolTagUuid, int locationId, String locationTagUuid) {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(3000);
http.setTimeout(10000); // 10s Timeout
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/scale/locate");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
if (spoolId > 0) doc["spool_id"] = spoolId;
if (spoolTagUuid.length() > 0) doc["spool_tag_uuid"] = spoolTagUuid;
@@ -165,11 +186,13 @@ bool sendLocation(int spoolId, String spoolTagUuid, int locationId, String locat
bool sendRfidResult(String tagUuid, int spoolId, int locationId, bool success, String errorMessage, float remainingWeight) {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(5000);
http.setTimeout(10000); // 10s Timeout
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/rfid-result");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
doc["success"] = success;
if (tagUuid.length() > 0) doc["tag_uuid"] = tagUuid;
@@ -177,7 +200,7 @@ bool sendRfidResult(String tagUuid, int spoolId, int locationId, bool success, S
if (locationId > 0) doc["location_id"] = locationId;
if (errorMessage.length() > 0) doc["error_message"] = errorMessage;
if (remainingWeight > 0) doc["remaining_weight_g"] = remainingWeight;
String payload;
serializeJson(doc, payload);
int httpCode = http.POST(payload);
@@ -185,11 +208,30 @@ bool sendRfidResult(String tagUuid, int spoolId, int locationId, bool success, S
return (httpCode == 200);
}
bool sendTagData(String tagJson) {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(10000);
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/tag-data");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
doc["tag_json"] = tagJson;
String payload;
serializeJson(doc, payload);
int httpCode = http.POST(payload);
http.end();
Serial.printf("sendTagData: HTTP %d\n", httpCode);
return (httpCode == 200);
}
void filamanApiTask(void* pvParameters) {
for (;;) {
ApiRequest req;
bool hasReq = false;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(100)) == pdTRUE) {
for(int i=0; i<MAX_API_QUEUE; i++) {
if(apiQueue[i].active) {
@@ -205,10 +247,11 @@ void filamanApiTask(void* pvParameters) {
if (hasReq) {
filamanApiState = API_TRANSMITTING;
switch (req.type) {
case API_REQUEST_HEARTBEAT: sendHeartbeat(); break;
case API_REQUEST_HEARTBEAT: sendHeartbeatWithRetry(2); break;
case API_REQUEST_WEIGHT: sendWeight(req.id1, req.str1, req.val); break;
case API_REQUEST_LOCATE: sendLocation(req.id1, req.str1, req.id2, req.str2); break;
case API_REQUEST_RFID_RESULT: sendRfidResult(req.str1, req.id1, req.id2, req.bool1, req.str3, req.remainingWeight); break;
case API_REQUEST_TAG_DATA: sendTagData(req.str1); break;
default: break;
}
filamanApiState = API_IDLE;
@@ -300,12 +343,30 @@ void sendRfidResultAsync(String tagUuid, int spoolId, int locationId, bool succe
}
}
void sendTagDataAsync(String tagJson) {
if (!checkFilamanRegistration()) return;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
for(int i=0; i<MAX_API_QUEUE; i++) if(!apiQueue[i].active) {
apiQueue[i].type = API_REQUEST_TAG_DATA;
apiQueue[i].str1 = tagJson;
apiQueue[i].id1 = 0;
apiQueue[i].id2 = 0;
apiQueue[i].str2 = "";
apiQueue[i].val = 0.0f;
apiQueue[i].active = true;
break;
}
xSemaphoreGive(queueMutex);
}
}
bool initFilaman() {
oledShowProgressBar(3, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_API_INIT));
loadFilamanConfig();
queueMutex = xSemaphoreCreateMutex();
// Move to Core 1 (Hardware Core) to free up Core 0 for WiFi/Webserver
// Set priority to 1 (same as Scale/NFC) to ensure fair scheduling
xTaskCreatePinnedToCore(filamanApiTask, "FilaManApi", 6144, NULL, 1, NULL, 1);
xTaskCreatePinnedToCore(filamanApiTask, "FilaManApi", 6144, NULL, 1, NULL, 1);
if (checkFilamanRegistration()) sendHeartbeatAsync();
return true;
}
+3 -1
View File
@@ -17,7 +17,8 @@ typedef enum {
API_REQUEST_HEARTBEAT,
API_REQUEST_WEIGHT,
API_REQUEST_LOCATE,
API_REQUEST_RFID_RESULT
API_REQUEST_RFID_RESULT,
API_REQUEST_TAG_DATA
} FilamanApiRequestType;
extern volatile filamanApiStateType filamanApiState;
@@ -30,6 +31,7 @@ void sendHeartbeatAsync();
void sendWeightAsync(int spoolId, String tagUuid, float weight);
void sendLocationAsync(int spoolId, String spoolTagUuid, int locationId, String locationTagUuid);
void sendRfidResultAsync(String tagUuid, int spoolId, int locationId, bool success, String errorMessage, float remainingWeight = 0);
void sendTagDataAsync(String tagJson);
// Internal blocking functions (used by async task)
bool sendHeartbeat();
+12 -2
View File
@@ -57,10 +57,20 @@ String readFile(const char* filename) {
Serial.println(filename);
return "";
}
String content = "";
// Effizient: Speicher vorab allokieren und in Blöcken lesen
// Alte Implementierung war O(n²) wegen Byte-für-Byte String-Konkatenation
size_t fileSize = file.size();
String content;
content.reserve(fileSize + 1); // Speicher vorab allokieren
// Lese in 512-Byte Blöcken statt Byte für Byte
char buffer[512];
while (file.available()) {
content += (char)file.read();
size_t bytesRead = file.readBytes(buffer, sizeof(buffer));
content.concat(buffer, bytesRead);
}
file.close();
return content;
}
+16 -2
View File
@@ -6,21 +6,35 @@
//#define PN532_MOSI 23
//#define PN532_SS 5
//#define PN532_MISO 19
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t PN532_IRQ = 15;
const uint8_t PN532_RESET = 16;
#else
const uint8_t PN532_IRQ = 32;
const uint8_t PN532_RESET = 33;
#endif
// ***** PN532
// ***** HX711 (Waage)
// HX711 circuit wiring
const uint8_t LOADCELL_DOUT_PIN = 16; //16;
const uint8_t LOADCELL_SCK_PIN = 17; //17;
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t LOADCELL_DOUT_PIN = 19;
const uint8_t LOADCELL_SCK_PIN = 20;
#else
const uint8_t LOADCELL_DOUT_PIN = 16;
const uint8_t LOADCELL_SCK_PIN = 17;
#endif
const uint8_t calVal_eepromAdress = 0;
const uint16_t SCALE_LEVEL_WEIGHT = 500;
// ***** HX711
// ***** TTP223 (Touch Sensor)
// TTP223 circuit wiring
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t TTP223_PIN = 7;
#else
const uint8_t TTP223_PIN = 25;
#endif
// ***** TTP223
+4 -2
View File
@@ -25,10 +25,12 @@
#define SCREEN_PROGRESS_BAR_HEIGHT 12U
#define DISPLAY_BOOT_TEXT "FilaMan"
#define WIFI_CHECK_INTERVAL 60000U
#define WIFI_CHECK_INTERVAL 15000U
#define DISPLAY_UPDATE_INTERVAL 1000U
#define FILAMAN_HEARTBEAT_INTERVAL 60000U
#define NUM_SETUP_STEPS 6 // 0:Display 1:WiFi 2:Web-Server 3:API 4:NFC 5:Scale 6:<finished>
extern const uint8_t PN532_IRQ;
extern const uint8_t PN532_RESET;
@@ -72,4 +74,4 @@ extern uint8_t scaleTaskPrio;
extern uint16_t defaultScaleCalibrationValue;
extern uint16_t oledSleepTimeout;
#endif
#endif
+53 -31
View File
@@ -115,7 +115,7 @@ void setupDisplay() {
lastActivityMillis = millis();
oledShowTopRow();
oledShowProgressBar(0, 7, DISPLAY_BOOT_TEXT, tr(STR_DISPLAY_INIT));
oledShowProgressBar(0, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_DISPLAY_INIT));
}
void oledclearline() {
@@ -144,14 +144,14 @@ int oled_center_v(const String &text) {
std::vector<String> splitTextIntoLines(const String &text, uint8_t textSize) {
std::vector<String> lines;
display.setTextSize(textSize);
// Text in Wörter aufteilen
std::vector<String> words;
int pos = 0;
while (pos < text.length()) {
// Überspringe Leerzeichen am Anfang
while (pos < text.length() && text[pos] == ' ') pos++;
// Finde nächstes Leerzeichen
int nextSpace = text.indexOf(' ', pos);
if (nextSpace == -1) {
@@ -165,19 +165,19 @@ std::vector<String> splitTextIntoLines(const String &text, uint8_t textSize) {
words.push_back(text.substring(pos, nextSpace));
pos = nextSpace + 1;
}
// Wörter zu Zeilen zusammenfügen
String currentLine = "";
for (size_t i = 0; i < words.size(); i++) {
String testLine = currentLine;
if (currentLine.length() > 0) testLine += " ";
testLine += words[i];
// Prüfe ob diese Kombination auf die Zeile passt
int16_t x1, y1;
uint16_t lineWidth, h;
display.getTextBounds(testLine, 0, OLED_DATA_START, &x1, &y1, &lineWidth, &h);
if (lineWidth <= SCREEN_WIDTH) {
// Passt noch in diese Zeile
currentLine = testLine;
@@ -192,40 +192,40 @@ std::vector<String> splitTextIntoLines(const String &text, uint8_t textSize) {
}
}
}
// Letzte Zeile hinzufügen
if (currentLine.length() > 0) {
lines.push_back(currentLine);
}
return lines;
}
void oledShowMultilineMessage(const String &message, uint8_t size) {
std::vector<String> lines;
int maxLines = 3; // Maximale Anzahl Zeilen für size 2
// Erste Prüfung mit aktueller Größe
lines = splitTextIntoLines(message, size);
// Wenn mehr als maxLines Zeilen, reduziere Textgröße
if (lines.size() > maxLines && size > 1) {
size = 1;
lines = splitTextIntoLines(message, size);
}
// Ausgabe
display.setTextSize(size);
int lineHeight = size * 8;
int totalHeight = lines.size() * lineHeight;
int startY = OLED_DATA_START + ((OLED_DATA_END - OLED_DATA_START - totalHeight) / 2);
uint8_t lineDistance = (lines.size() == 2) ? 5 : 0;
for (size_t i = 0; i < lines.size(); i++) {
display.setCursor(oled_center_h(lines[i]), startY + (i * lineHeight) + (i == 1 ? lineDistance : 0));
display.print(lines[i]);
}
display.display();
}
@@ -233,12 +233,12 @@ void oledDisplayText(const String &message, uint8_t size) {
oledcleardata();
display.setTextSize(size);
display.setTextWrap(false);
// Prüfe ob Text in eine Zeile passt
int16_t x1, y1;
uint16_t textWidth, h;
display.getTextBounds(message, 0, 0, &x1, &y1, &textWidth, &h);
// Text passt in eine Zeile?
if (textWidth <= SCREEN_WIDTH) {
display.setCursor(oled_center_h(message), oled_center_v(message));
@@ -250,6 +250,12 @@ void oledDisplayText(const String &message, uint8_t size) {
}
void oledShowTopRow() {
const u_int8_t rightmost_x = 108;
const u_int8_t x_offset = 25;
const u_int8_t symbol_width =16;
const u_int8_t symbol_height =16;
u_int8_t x_pos = rightmost_x;
oledclearline();
display.setTextSize(1);
@@ -259,29 +265,45 @@ void oledShowTopRow() {
iconToggle = !iconToggle;
// draw symbols from right to left
// Do not show status indicators during boot
if(!booting){
if (filamanConnected) {
display.drawBitmap(80, 0, bitmap_spoolman_on , 16, 16, WHITE);
// WiFi
x_pos = rightmost_x;
if (wifiOn == 1) {
display.drawBitmap(x_pos, 0, wifi_on , symbol_width, symbol_height, WHITE);
} else {
if(iconToggle){
display.drawBitmap(80, 0, bitmap_spoolman_on , 16, 16, WHITE);
display.drawLine(80, 15, 96, 0, WHITE);
display.drawLine(81, 15, 97, 0, WHITE);
display.drawBitmap(x_pos, 0, wifi_on , symbol_width, symbol_height, WHITE);
display.drawLine(x_pos, symbol_height-1, x_pos + symbol_width, 0, WHITE);
display.drawLine(x_pos+1, symbol_height-1, x_pos+1 + symbol_width, 0, WHITE);
}
}
if (wifiOn == 1) {
display.drawBitmap(107, 0, wifi_on , 16, 16, WHITE);
// Backend
x_pos -= x_offset; // change x position to the left
if (filamanConnected) {
display.drawBitmap(x_pos, 0, bitmap_spoolman_on , symbol_width, symbol_height, WHITE);
} else {
if(iconToggle){
display.drawBitmap(107, 0, wifi_on , 16, 16, WHITE);
display.drawLine(107, 15, 123, 0, WHITE);
display.drawLine(108, 15, 124, 0, WHITE);
display.drawBitmap(x_pos, 0, bitmap_spoolman_on , symbol_width, symbol_height, WHITE);
display.drawLine(x_pos, symbol_height-1, x_pos + symbol_width, 0, WHITE);
display.drawLine(x_pos+1, symbol_height-1, x_pos+1 + symbol_width, 0, WHITE);
}
}
// Scale
x_pos -= x_offset; // change x position to the left
if (scaleConnected) {
display.drawBitmap(x_pos, 0, bitmap_scale_on , symbol_width, symbol_height, WHITE);
} else {
display.drawBitmap(x_pos, 0, bitmap_scale_on , symbol_width, symbol_height, WHITE);
display.drawLine(x_pos-1, symbol_height-1, x_pos-1 + symbol_width, 0, WHITE);
display.drawLine(x_pos, symbol_height-1, x_pos + symbol_width, 0, WHITE);
display.drawLine(x_pos+1, symbol_height-1, x_pos+1 + symbol_width, 0, WHITE);
}
}
display.display();
}
@@ -313,7 +335,7 @@ void oledShowProgressBar(const uint8_t step, const uint8_t numSteps, const char*
// clear data and bar area
display.fillRect(0, OLED_DATA_START, SCREEN_WIDTH, SCREEN_HEIGHT-16, BLACK);
display.setTextWrap(false);
display.setTextSize(2);
display.setCursor(0, OLED_DATA_START+4);
@@ -343,7 +365,7 @@ void oledShowRemainingWeight(uint16_t remainingWeight) {
display.setTextSize(1);
display.setCursor(oled_center_h(tr(STR_WEIGHT_SENT_REST)), OLED_DATA_START + 4);
display.print(tr(STR_WEIGHT_SENT_REST));
display.setTextSize(3);
String weightStr = String(remainingWeight) + " g";
display.setCursor(oled_center_h(weightStr), OLED_DATA_START + 22);
@@ -354,15 +376,15 @@ void oledShowRemainingWeight(uint16_t remainingWeight) {
void oledShowConnectionError(const char* error, const String& ip) {
oledcleardata();
display.setTextSize(1);
// Error Message
display.setCursor(oled_center_h(error), OLED_DATA_START + 4);
display.print(error);
// IP Address
display.setTextSize(1);
display.setCursor(oled_center_h(ip), OLED_DATA_START + 24);
display.print(ip);
display.display();
}
+81 -75
View File
@@ -1,7 +1,7 @@
#include <Arduino.h>
/*
// Create Icons
// Create Icons
https://javl.github.io/image2cpp/
Size: 47x47
BG Color: Black
@@ -10,117 +10,123 @@ Ohters in default
*/
const unsigned char wifi_on [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xe0, 0x1f, 0xf8, 0x78, 0x1e, 0x60, 0x06, 0x07, 0xe0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xe0, 0x1f, 0xf8, 0x78, 0x1e, 0x60, 0x06, 0x07, 0xe0,
0x0f, 0xf0, 0x08, 0x10, 0x00, 0x00, 0x03, 0xc0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
const unsigned char wifi_off [] PROGMEM = {
0x00, 0x00, 0x20, 0x00, 0x30, 0x00, 0x1b, 0xf0, 0x3d, 0xfc, 0x7e, 0x1e, 0x63, 0x06, 0x07, 0xa0,
0x00, 0x00, 0x20, 0x00, 0x30, 0x00, 0x1b, 0xf0, 0x3d, 0xfc, 0x7e, 0x1e, 0x63, 0x06, 0x07, 0xa0,
0x1f, 0xd8, 0x08, 0x60, 0x01, 0xb0, 0x03, 0xd8, 0x01, 0x8c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
// 'off', 16x16px
const unsigned char bitmap_off [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
// 'spoolman_on', 16x16px
const unsigned char bitmap_spoolman_on [] PROGMEM = {
0x03, 0xc0, 0x08, 0xf0, 0x20, 0xfc, 0x00, 0xfc, 0x40, 0xfe, 0x70, 0xf0, 0xf8, 0xc1, 0xff, 0xc1,
0x03, 0xc0, 0x08, 0xf0, 0x20, 0xfc, 0x00, 0xfc, 0x40, 0xfe, 0x70, 0xf0, 0xf8, 0xc1, 0xff, 0xc1,
0xff, 0xc1, 0xf9, 0xc1, 0x70, 0xf0, 0x40, 0xfe, 0x00, 0xfc, 0x20, 0xfc, 0x08, 0xf0, 0x03, 0xc0
};
// 'bambu_on', 16x16px
const unsigned char bitmap_bambu_on [] PROGMEM = {
0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x1c, 0x3e, 0x00, 0x3e, 0x40,
0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x1c, 0x3e, 0x00, 0x3e, 0x40,
0x30, 0x78, 0x00, 0x7c, 0x06, 0x7c, 0x1e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c
};
// 'scale_on', 16x16px
const unsigned char bitmap_scale_on [] PROGMEM = {
0x01, 0x80, 0x3f, 0xfc, 0x3f, 0xfc, 0x11, 0x88, 0x21, 0x84, 0x09, 0x90, 0x49, 0x92, 0x45, 0xa2,
0x05, 0xa1, 0xff, 0xbf, 0xfd, 0xbf, 0x79, 0x9e, 0x01, 0x80, 0x01, 0x80, 0x0f, 0xf0, 0x0f, 0xf8
};
// 'failed', 47x47px
const unsigned char icon_failed [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff,
0x00, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xc0, 0x00, 0x00, 0x1f, 0xfc, 0x7f, 0xf0, 0x00, 0x00, 0x7f,
0x80, 0x03, 0xf8, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x07, 0xc0, 0x00, 0x00, 0x0f, 0x80, 0x07, 0x80, 0x00, 0x00,
0x07, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x01, 0xe0, 0x1e, 0x03,
0x80, 0x07, 0x80, 0xf0, 0x3e, 0x03, 0xc0, 0x07, 0x80, 0xf0, 0x3c, 0x03, 0xe0, 0x0f, 0x80, 0x78,
0x3c, 0x01, 0xf0, 0x1f, 0x00, 0x78, 0x78, 0x00, 0xf8, 0x3e, 0x00, 0x38, 0x78, 0x00, 0x7c, 0x7c,
0x00, 0x3c, 0x78, 0x00, 0x3c, 0xf8, 0x00, 0x3c, 0x78, 0x00, 0x3f, 0xf0, 0x00, 0x3c, 0x70, 0x00,
0x1f, 0xf0, 0x00, 0x3c, 0x70, 0x00, 0x0f, 0xe0, 0x00, 0x3c, 0xf0, 0x00, 0x07, 0xc0, 0x00, 0x1c,
0xf0, 0x00, 0x0f, 0xe0, 0x00, 0x3c, 0x70, 0x00, 0x1f, 0xf0, 0x00, 0x3c, 0x78, 0x00, 0x3f, 0xf0,
0x00, 0x3c, 0x78, 0x00, 0x3e, 0xf8, 0x00, 0x3c, 0x78, 0x00, 0x7c, 0x7c, 0x00, 0x3c, 0x78, 0x00,
0xf8, 0x3e, 0x00, 0x3c, 0x3c, 0x01, 0xf0, 0x1f, 0x00, 0x78, 0x3c, 0x03, 0xe0, 0x0f, 0x80, 0x78,
0x3e, 0x03, 0xc0, 0x0f, 0x80, 0xf0, 0x1e, 0x03, 0x80, 0x07, 0x80, 0xf0, 0x1f, 0x00, 0x00, 0x00,
0x01, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x03, 0xe0, 0x07, 0x80, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0,
0x00, 0x00, 0x0f, 0xc0, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x7f, 0x80, 0x03, 0xfc, 0x00, 0x00, 0x1f, 0xf8, 0x3f,
0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x03, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff,
0x00, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xc0, 0x00, 0x00, 0x1f, 0xfc, 0x7f, 0xf0, 0x00, 0x00, 0x7f,
0x80, 0x03, 0xf8, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x07, 0xc0, 0x00, 0x00, 0x0f, 0x80, 0x07, 0x80, 0x00, 0x00,
0x07, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x01, 0xe0, 0x1e, 0x03,
0x80, 0x07, 0x80, 0xf0, 0x3e, 0x03, 0xc0, 0x07, 0x80, 0xf0, 0x3c, 0x03, 0xe0, 0x0f, 0x80, 0x78,
0x3c, 0x01, 0xf0, 0x1f, 0x00, 0x78, 0x78, 0x00, 0xf8, 0x3e, 0x00, 0x38, 0x78, 0x00, 0x7c, 0x7c,
0x00, 0x3c, 0x78, 0x00, 0x3c, 0xf8, 0x00, 0x3c, 0x78, 0x00, 0x3f, 0xf0, 0x00, 0x3c, 0x70, 0x00,
0x1f, 0xf0, 0x00, 0x3c, 0x70, 0x00, 0x0f, 0xe0, 0x00, 0x3c, 0xf0, 0x00, 0x07, 0xc0, 0x00, 0x1c,
0xf0, 0x00, 0x0f, 0xe0, 0x00, 0x3c, 0x70, 0x00, 0x1f, 0xf0, 0x00, 0x3c, 0x78, 0x00, 0x3f, 0xf0,
0x00, 0x3c, 0x78, 0x00, 0x3e, 0xf8, 0x00, 0x3c, 0x78, 0x00, 0x7c, 0x7c, 0x00, 0x3c, 0x78, 0x00,
0xf8, 0x3e, 0x00, 0x3c, 0x3c, 0x01, 0xf0, 0x1f, 0x00, 0x78, 0x3c, 0x03, 0xe0, 0x0f, 0x80, 0x78,
0x3e, 0x03, 0xc0, 0x0f, 0x80, 0xf0, 0x1e, 0x03, 0x80, 0x07, 0x80, 0xf0, 0x1f, 0x00, 0x00, 0x00,
0x01, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x03, 0xe0, 0x07, 0x80, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0,
0x00, 0x00, 0x0f, 0xc0, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x7f, 0x80, 0x03, 0xfc, 0x00, 0x00, 0x1f, 0xf8, 0x3f,
0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x03, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00,
0x7f, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
// 'loading', 47x47px
const unsigned char icon_loading [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x80,
0x00, 0x00, 0x00, 0x00, 0x0f, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x07, 0xe0, 0x00, 0x00, 0x00, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00,
0x00, 0x01, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x07, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xfe,
0x00, 0x00, 0x00, 0x3f, 0xf9, 0xfc, 0x00, 0x00, 0x00, 0x7f, 0x83, 0xf8, 0x38, 0x00, 0x00, 0xff,
0x07, 0xf0, 0x7c, 0x00, 0x00, 0xfc, 0x07, 0xe0, 0x7e, 0x00, 0x01, 0xf8, 0x0f, 0xc0, 0x3f, 0x00,
0x03, 0xf0, 0x07, 0x80, 0x1f, 0x00, 0x03, 0xe0, 0x03, 0x00, 0x1f, 0x80, 0x07, 0xe0, 0x00, 0x00,
0x0f, 0x80, 0x07, 0xc0, 0x00, 0x00, 0x0f, 0xc0, 0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0, 0x0f, 0x80,
0x00, 0x00, 0x07, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0,
0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00,
0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80,
0x00, 0x00, 0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0,
0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xe0, 0x00, 0x00, 0x0f, 0x80, 0x03, 0xe0, 0x00, 0x00,
0x1f, 0x80, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00, 0x01, 0xfc,
0x00, 0x00, 0x7e, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xfc, 0x00, 0x00, 0x7f, 0x80, 0x07, 0xf8, 0x00,
0x00, 0x3f, 0xf0, 0x3f, 0xf0, 0x00, 0x00, 0x1f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x07, 0xff, 0xff,
0xc0, 0x00, 0x00, 0x01, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x80,
0x00, 0x00, 0x00, 0x00, 0x0f, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x07, 0xe0, 0x00, 0x00, 0x00, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00,
0x00, 0x01, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x07, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xfe,
0x00, 0x00, 0x00, 0x3f, 0xf9, 0xfc, 0x00, 0x00, 0x00, 0x7f, 0x83, 0xf8, 0x38, 0x00, 0x00, 0xff,
0x07, 0xf0, 0x7c, 0x00, 0x00, 0xfc, 0x07, 0xe0, 0x7e, 0x00, 0x01, 0xf8, 0x0f, 0xc0, 0x3f, 0x00,
0x03, 0xf0, 0x07, 0x80, 0x1f, 0x00, 0x03, 0xe0, 0x03, 0x00, 0x1f, 0x80, 0x07, 0xe0, 0x00, 0x00,
0x0f, 0x80, 0x07, 0xc0, 0x00, 0x00, 0x0f, 0xc0, 0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0, 0x0f, 0x80,
0x00, 0x00, 0x07, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0,
0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00,
0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80,
0x00, 0x00, 0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0,
0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xe0, 0x00, 0x00, 0x0f, 0x80, 0x03, 0xe0, 0x00, 0x00,
0x1f, 0x80, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00, 0x01, 0xfc,
0x00, 0x00, 0x7e, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xfc, 0x00, 0x00, 0x7f, 0x80, 0x07, 0xf8, 0x00,
0x00, 0x3f, 0xf0, 0x3f, 0xf0, 0x00, 0x00, 0x1f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x07, 0xff, 0xff,
0xc0, 0x00, 0x00, 0x01, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x00,
0x03, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
// 'success', 47x47px
const unsigned char icon_success [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff,
0x80, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x1f, 0xfc, 0x3f, 0xf0, 0x00, 0x00, 0x7f,
0x80, 0x03, 0xfc, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x03, 0xe0, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0, 0x00, 0x00,
0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x01, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x01, 0xf0, 0x1e, 0x00,
0x00, 0x00, 0x00, 0xf0, 0x1e, 0x00, 0x00, 0x00, 0xc0, 0xf8, 0x3c, 0x00, 0x00, 0x01, 0xe0, 0x78,
0x3c, 0x00, 0x00, 0x03, 0xe0, 0x78, 0x38, 0x00, 0x00, 0x03, 0xc0, 0x3c, 0x78, 0x00, 0x00, 0x07,
0xc0, 0x3c, 0x78, 0x00, 0x00, 0x0f, 0x80, 0x3c, 0x78, 0x00, 0x00, 0x1f, 0x00, 0x1c, 0x78, 0x00,
0x00, 0x1e, 0x00, 0x1c, 0x78, 0x0f, 0x00, 0x3e, 0x00, 0x1e, 0x78, 0x0f, 0x80, 0x7c, 0x00, 0x1e,
0x78, 0x0f, 0xc0, 0xf8, 0x00, 0x1e, 0x78, 0x07, 0xe0, 0xf0, 0x00, 0x1c, 0x78, 0x03, 0xf1, 0xf0,
0x00, 0x1c, 0x78, 0x01, 0xfb, 0xe0, 0x00, 0x3c, 0x78, 0x00, 0xff, 0xc0, 0x00, 0x3c, 0x38, 0x00,
0x7f, 0x80, 0x00, 0x3c, 0x3c, 0x00, 0x3f, 0x80, 0x00, 0x78, 0x3c, 0x00, 0x1f, 0x00, 0x00, 0x78,
0x1e, 0x00, 0x0e, 0x00, 0x00, 0xf8, 0x1e, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00,
0x01, 0xf0, 0x0f, 0x80, 0x00, 0x00, 0x01, 0xe0, 0x07, 0xc0, 0x00, 0x00, 0x03, 0xc0, 0x03, 0xe0,
0x00, 0x00, 0x07, 0xc0, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x7f, 0x80, 0x03, 0xfc, 0x00, 0x00, 0x1f, 0xfc, 0x3f,
0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x03, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff,
0x80, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x1f, 0xfc, 0x3f, 0xf0, 0x00, 0x00, 0x7f,
0x80, 0x03, 0xfc, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x03, 0xe0, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0, 0x00, 0x00,
0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x01, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x01, 0xf0, 0x1e, 0x00,
0x00, 0x00, 0x00, 0xf0, 0x1e, 0x00, 0x00, 0x00, 0xc0, 0xf8, 0x3c, 0x00, 0x00, 0x01, 0xe0, 0x78,
0x3c, 0x00, 0x00, 0x03, 0xe0, 0x78, 0x38, 0x00, 0x00, 0x03, 0xc0, 0x3c, 0x78, 0x00, 0x00, 0x07,
0xc0, 0x3c, 0x78, 0x00, 0x00, 0x0f, 0x80, 0x3c, 0x78, 0x00, 0x00, 0x1f, 0x00, 0x1c, 0x78, 0x00,
0x00, 0x1e, 0x00, 0x1c, 0x78, 0x0f, 0x00, 0x3e, 0x00, 0x1e, 0x78, 0x0f, 0x80, 0x7c, 0x00, 0x1e,
0x78, 0x0f, 0xc0, 0xf8, 0x00, 0x1e, 0x78, 0x07, 0xe0, 0xf0, 0x00, 0x1c, 0x78, 0x03, 0xf1, 0xf0,
0x00, 0x1c, 0x78, 0x01, 0xfb, 0xe0, 0x00, 0x3c, 0x78, 0x00, 0xff, 0xc0, 0x00, 0x3c, 0x38, 0x00,
0x7f, 0x80, 0x00, 0x3c, 0x3c, 0x00, 0x3f, 0x80, 0x00, 0x78, 0x3c, 0x00, 0x1f, 0x00, 0x00, 0x78,
0x1e, 0x00, 0x0e, 0x00, 0x00, 0xf8, 0x1e, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00,
0x01, 0xf0, 0x0f, 0x80, 0x00, 0x00, 0x01, 0xe0, 0x07, 0xc0, 0x00, 0x00, 0x03, 0xc0, 0x03, 0xe0,
0x00, 0x00, 0x07, 0xc0, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x7f, 0x80, 0x03, 0xfc, 0x00, 0x00, 0x1f, 0xfc, 0x3f,
0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x03, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00,
0x7f, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
// 'transfer', 47x47px
const unsigned char icon_transfer [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0xe0, 0x01,
0xfe, 0x00, 0x00, 0x3f, 0xe0, 0x07, 0xff, 0x80, 0x00, 0xff, 0xc0, 0x0f, 0xff, 0xc0, 0x01, 0xfb,
0xc0, 0x1f, 0x03, 0xe0, 0x03, 0xe3, 0x80, 0x3c, 0x00, 0xf0, 0x07, 0xc3, 0x80, 0x78, 0x00, 0x78,
0x0f, 0x80, 0x00, 0x70, 0x00, 0x78, 0x0f, 0x00, 0x00, 0x70, 0x00, 0x38, 0x1e, 0x00, 0x00, 0xf0,
0x00, 0x3c, 0x1c, 0x00, 0x00, 0xe0, 0x00, 0x3c, 0x3c, 0x00, 0x00, 0xe0, 0x00, 0x1c, 0x38, 0x00,
0x00, 0xe0, 0x00, 0x3c, 0x38, 0x00, 0x00, 0xf0, 0x00, 0x3c, 0x38, 0x00, 0x00, 0x70, 0x00, 0x38,
0x38, 0x00, 0x00, 0x78, 0x00, 0x78, 0x38, 0x00, 0x00, 0x78, 0x00, 0x78, 0x30, 0x00, 0x00, 0x3c,
0x00, 0xf0, 0x00, 0x00, 0x00, 0x1f, 0x03, 0xe0, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xc0, 0x00, 0x00,
0x00, 0x07, 0xff, 0x80, 0x00, 0x00, 0x00, 0x01, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0xff, 0xc0, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xf0, 0x00, 0x00, 0x00, 0x1f, 0xff, 0xfc, 0x00,
0x00, 0x00, 0x1f, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x1e, 0x00, 0x00, 0x18, 0x38, 0x00,
0x0e, 0x00, 0x00, 0x1c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x1c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x3c,
0x38, 0x00, 0x0e, 0x00, 0x00, 0x3c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x38, 0x38, 0x00, 0x0e, 0x00,
0x00, 0x38, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x78, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x70, 0x38, 0x00,
0x0e, 0x00, 0x00, 0xf0, 0x38, 0x00, 0x0e, 0x00, 0x01, 0xe0, 0x38, 0x00, 0x0e, 0x01, 0x83, 0xe0,
0x38, 0x00, 0x0e, 0x03, 0x87, 0xc0, 0x3c, 0x00, 0x1e, 0x03, 0x9f, 0x80, 0x1f, 0x80, 0xfc, 0x07,
0xff, 0x00, 0x1f, 0xff, 0xf8, 0x07, 0xfc, 0x00, 0x07, 0xff, 0xf0, 0x0f, 0xf0, 0x00, 0x01, 0xff,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0xe0, 0x01,
0xfe, 0x00, 0x00, 0x3f, 0xe0, 0x07, 0xff, 0x80, 0x00, 0xff, 0xc0, 0x0f, 0xff, 0xc0, 0x01, 0xfb,
0xc0, 0x1f, 0x03, 0xe0, 0x03, 0xe3, 0x80, 0x3c, 0x00, 0xf0, 0x07, 0xc3, 0x80, 0x78, 0x00, 0x78,
0x0f, 0x80, 0x00, 0x70, 0x00, 0x78, 0x0f, 0x00, 0x00, 0x70, 0x00, 0x38, 0x1e, 0x00, 0x00, 0xf0,
0x00, 0x3c, 0x1c, 0x00, 0x00, 0xe0, 0x00, 0x3c, 0x3c, 0x00, 0x00, 0xe0, 0x00, 0x1c, 0x38, 0x00,
0x00, 0xe0, 0x00, 0x3c, 0x38, 0x00, 0x00, 0xf0, 0x00, 0x3c, 0x38, 0x00, 0x00, 0x70, 0x00, 0x38,
0x38, 0x00, 0x00, 0x78, 0x00, 0x78, 0x38, 0x00, 0x00, 0x78, 0x00, 0x78, 0x30, 0x00, 0x00, 0x3c,
0x00, 0xf0, 0x00, 0x00, 0x00, 0x1f, 0x03, 0xe0, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xc0, 0x00, 0x00,
0x00, 0x07, 0xff, 0x80, 0x00, 0x00, 0x00, 0x01, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0xff, 0xc0, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xf0, 0x00, 0x00, 0x00, 0x1f, 0xff, 0xfc, 0x00,
0x00, 0x00, 0x1f, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x1e, 0x00, 0x00, 0x18, 0x38, 0x00,
0x0e, 0x00, 0x00, 0x1c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x1c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x3c,
0x38, 0x00, 0x0e, 0x00, 0x00, 0x3c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x38, 0x38, 0x00, 0x0e, 0x00,
0x00, 0x38, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x78, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x70, 0x38, 0x00,
0x0e, 0x00, 0x00, 0xf0, 0x38, 0x00, 0x0e, 0x00, 0x01, 0xe0, 0x38, 0x00, 0x0e, 0x01, 0x83, 0xe0,
0x38, 0x00, 0x0e, 0x03, 0x87, 0xc0, 0x3c, 0x00, 0x1e, 0x03, 0x9f, 0x80, 0x1f, 0x80, 0xfc, 0x07,
0xff, 0x00, 0x1f, 0xff, 0xf8, 0x07, 0xfc, 0x00, 0x07, 0xff, 0xf0, 0x0f, 0xf0, 0x00, 0x01, 0xff,
0xc0, 0x07, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
+16
View File
@@ -10,8 +10,10 @@ Lang currentLang = LANG_EN;
static const char EN_DISPLAY_INIT[] = "Display init";
static const char EN_WIFI_INIT[] = "WiFi init";
static const char EN_WEBSERVER_INIT[] = "Webserver init";
static const char EN_API_INIT[] = "API init";
static const char EN_NFC_INIT[] = "NFC init";
static const char EN_SEARCHING_SCALE[] = "Searching scale";
static const char EN_INIT_DONE[] = "Setup finished";
static const char EN_TARE_SCALE[] = "TARE Scale";
static const char EN_SCALE_NOT_CAL[] = "Scale not calibrated";
@@ -76,14 +78,19 @@ static const char EN_WIFI_RECONN[] = "WiFi reconnecting";
static const char EN_UPDATE[] = "Update";
static const char EN_DOWNLOAD[] = "Download";
static const char EN_NOSCALE_MODE[] = "Activate NFC-only mode";
static const char EN_NOSCALE_PROMPT[] = "ready...";
// =====================================================================
// German strings
// =====================================================================
static const char DE_DISPLAY_INIT[] = "Display init";
static const char DE_WIFI_INIT[] = "WiFi init";
static const char DE_WEBSERVER_INIT[] = "Webserver init";
static const char DE_API_INIT[] = "API init";
static const char DE_NFC_INIT[] = "NFC init";
static const char DE_SEARCHING_SCALE[] = "Suche Waage";
static const char DE_INIT_DONE[] = "Setup abgeschlossen";
static const char DE_TARE_SCALE[] = "Waage tarieren";
static const char DE_SCALE_NOT_CAL[] = "Waage nicht kalibriert";
@@ -148,6 +155,9 @@ static const char DE_WIFI_RECONN[] = "WiFi Neuverbindung";
static const char DE_UPDATE[] = "Update";
static const char DE_DOWNLOAD[] = "Download";
static const char DE_NOSCALE_MODE[] = "Aktiviere NFC-only Modus";
static const char DE_NOSCALE_PROMPT[] = "bereit...";
// =====================================================================
// String table: [StringID][Lang]
// =====================================================================
@@ -156,8 +166,10 @@ static const char* const stringTable[STR_COUNT][LANG_COUNT] = {
{ EN_DISPLAY_INIT, DE_DISPLAY_INIT },
{ EN_WIFI_INIT, DE_WIFI_INIT },
{ EN_WEBSERVER_INIT, DE_WEBSERVER_INIT },
{ EN_API_INIT, DE_API_INIT },
{ EN_NFC_INIT, DE_NFC_INIT },
{ EN_SEARCHING_SCALE, DE_SEARCHING_SCALE },
{ EN_INIT_DONE, DE_INIT_DONE },
// Scale
{ EN_TARE_SCALE, DE_TARE_SCALE },
@@ -227,6 +239,10 @@ static const char* const stringTable[STR_COUNT][LANG_COUNT] = {
// OTA
{ EN_UPDATE, DE_UPDATE },
{ EN_DOWNLOAD, DE_DOWNLOAD },
// No-Scale mode
{ EN_NOSCALE_MODE, DE_NOSCALE_MODE },
{ EN_NOSCALE_PROMPT, DE_NOSCALE_PROMPT },
};
const char* tr(StringID id) {
+6
View File
@@ -16,8 +16,10 @@ enum StringID : uint8_t {
STR_DISPLAY_INIT,
STR_WIFI_INIT,
STR_WEBSERVER_INIT,
STR_API_INIT,
STR_NFC_INIT,
STR_SEARCHING_SCALE,
STR_INIT_DONE,
// Scale
STR_TARE_SCALE,
@@ -88,6 +90,10 @@ enum StringID : uint8_t {
STR_UPDATE,
STR_DOWNLOAD,
// No-Scale mode
STR_NOSCALE_MODE,
STR_NOSCALE_PROMPT,
STR_COUNT // must be last
};
+48 -21
View File
@@ -53,7 +53,7 @@ void setup() {
// Touch Sensor
pinMode(TTP223_PIN, INPUT_PULLUP);
if (digitalRead(TTP223_PIN) == LOW)
if (digitalRead(TTP223_PIN) == LOW)
{
Serial.println("Touch Sensor is connected");
touchSensorConnected = true;
@@ -61,15 +61,24 @@ void setup() {
// Scale
start_scale(touchSensorConnected);
scaleTareRequest = true;
if (scaleConnected){
scaleTareRequest = true;
}
// WDT initialisieren mit 10 Sekunden Timeout
bool panic = true; // Wenn true, löst ein WDT-Timeout einen System-Panik aus
esp_task_wdt_init(10, panic);
booting = false;
oledShowProgressBar(6, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_INIT_DONE));
// Aktuellen Task (loopTask) zum Watchdog hinzufügen
esp_task_wdt_add(NULL);
if ( !scaleConnected ) {
// Clear Display after Boot
oledDisplayText(tr(STR_NOSCALE_PROMPT));
}
}
@@ -119,11 +128,14 @@ void loop() {
oledShowConnectionError(tr(STR_API_CONN_LOST), WiFi.localIP().toString());
oledSetPriority(DISPLAY_PRIORITY_WARNING, 3000);
mainTaskWasPaused = true;
} else if ( !scaleConnected ){
// everything fine again: without scale manual clearing of the error msg is needed
oledDisplayText(tr(STR_NOSCALE_PROMPT));
}
}
// Überprüfe den Status des Touch Sensors
if (touchSensorConnected && digitalRead(TTP223_PIN) == HIGH && currentMillis - lastButtonPress > debounceDelay)
// Überprüfe den Status des Touch Sensors (nur wenn Waage vorhanden)
if (scaleConnected && touchSensorConnected && digitalRead(TTP223_PIN) == HIGH && currentMillis - lastButtonPress > debounceDelay)
{
lastButtonPress = currentMillis;
scaleTareRequest = true;
@@ -131,36 +143,43 @@ void loop() {
}
// Überprüfe regelmäßig die WLAN-Verbindung
if (intervalElapsed(currentMillis, lastWifiCheckTime, WIFI_CHECK_INTERVAL))
if (intervalElapsed(currentMillis, lastWifiCheckTime, WIFI_CHECK_INTERVAL))
{
checkWiFiConnection();
}
// Periodic display update
if (intervalElapsed(currentMillis, lastTopRowUpdateTime, DISPLAY_UPDATE_INTERVAL))
if (intervalElapsed(currentMillis, lastTopRowUpdateTime, DISPLAY_UPDATE_INTERVAL))
{
oledShowTopRow();
oledCheckSleep(); // Put display to sleep if timeout elapsed
// Clean up dead websocket clients periodically instead of on connect
if(currentMillis % 10000 < 50) ws.cleanupClients();
}
// WebSocket Cleanup alle 5 Sekunden (häufiger als vorher)
// Tote Clients können WiFi-Ressourcen blockieren
static unsigned long lastWsCleanup = 0;
if (currentMillis - lastWsCleanup >= 5000) {
ws.cleanupClients();
lastWsCleanup = currentMillis;
}
// Periodic FilaMan heartbeat
if (intervalElapsed(currentMillis, lastFilamanHeartbeatTime, FILAMAN_HEARTBEAT_INTERVAL))
if (intervalElapsed(currentMillis, lastFilamanHeartbeatTime, FILAMAN_HEARTBEAT_INTERVAL))
{
sendHeartbeatAsync();
}
// If scale is not calibrated, only show a warning
if (!scaleCalibrated)
if (scaleConnected && !scaleCalibrated)
{
// Do not show the warning if the calibratin process is onging
if(!scaleCalibrationActive){
oledDisplayText(tr(STR_SCALE_NOT_CALIBRATED));
vTaskDelay(pdMS_TO_TICKS(1000));
}
}
else
}
if (scaleConnected && scaleCalibrated)
{
// Ausgabe der Waage auf Display
// Block weight display during NFC write operations and higher-priority display messages
@@ -180,9 +199,17 @@ void loop() {
mainTaskWasPaused = true;
}
// Während eines expliziten Scan-Requests darf kein regulärer Wiegevorgang
// an das Backend gesendet werden.
if (scanRequestActive) {
weightCounterToApi = 0;
weightSend = 0;
lastWeight = weight;
}
// Wenn Timer abgelaufen und nicht gerade ein RFID-Tag geschrieben wird
if (currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState < NFC_WRITING)
if (!scanRequestActive && currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState < NFC_WRITING)
{
lastWeightReadTime = currentMillis;
@@ -195,8 +222,8 @@ void loop() {
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), tr(STR_WEIGHT_STABLE));
oledSetPriority(DISPLAY_PRIORITY_INFO, 1000);
}
}
else
}
else
{
// Show visual feedback when tag is present and weight is unstable
if (weightCounterToApi > 0 && nfcReaderState == NFC_READ_SUCCESS && !tagProcessed && weightSend == 0) {
@@ -210,10 +237,10 @@ void loop() {
lastWeight = weight;
// Wenn ein Tag erkannt wurde und das Gewicht stabil ist (4+ seconds), an FilaMan senden
if (weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
if (!scanRequestActive && weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Check if it's a Bambu tag - if so, send only UUID without spoolId
if (isBambuTag) {
sendWeightAsync(0, activeTagUuid, weight);
@@ -225,24 +252,24 @@ void loop() {
Serial.println("Weight queued for FilaMan");
}
weightSend = 1;
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_SPOOL_TAG), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
}
// Handle successful tag write
if (nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
if (!scanRequestActive && nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Only send weight if a valid spoolId exists (spool tag, not location tag)
if (activeSpoolId.length() > 0 && activeSpoolId != "0") {
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
weightSend = 1;
Serial.println("Weight queued for FilaMan after spool tag write");
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_TAG_WRITTEN), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
+438 -318
View File
File diff suppressed because it is too large. Load diff
+2
View File
@@ -28,6 +28,7 @@ void scanRfidTask(void * parameter);
void startWriteJsonToTag(const bool isSpoolTag, const char* payload, int spoolId = 0, int locationId = 0);
bool quickSpoolIdCheck(String uidString);
bool readCompleteJsonForFastPath(); // Read complete JSON data for fast-path web interface display
void setScanRequest(bool active);
extern TaskHandle_t RfidReaderTask;
extern String nfcJsonData;
@@ -36,6 +37,7 @@ extern String activeTagUuid;
extern String lastSpoolId;
extern volatile nfcReaderStateType nfcReaderState;
extern volatile bool nfcWriteInProgress;
extern volatile bool scanRequestActive;
extern bool tagProcessed;
extern bool isBambuTag;
+31 -24
View File
@@ -16,6 +16,7 @@ static int currentUpdateCommand = 0;
static size_t updateTotalSize = 0;
static size_t updateWritten = 0;
static bool isSpiffsUpdate = false;
static size_t lastYieldAt = 0; // Für WiFi-Yield während großer Uploads
/**
* Compares two version strings and determines if version1 is less than version2
@@ -64,11 +65,18 @@ void espRestart() {
void sendUpdateProgress(int progress, const char* status = nullptr, const char* message = nullptr) {
static int lastSentProgress = -1;
static unsigned long lastSendTime = 0;
// Verhindere zu häufige Updates
unsigned long now = millis();
// Verhindere zu häufige Updates - mindestens 500ms zwischen Progress-Updates
// Dies reduziert WebSocket-Traffic während des Uploads erheblich
if (progress == lastSentProgress && !status && !message) {
return;
}
if (now - lastSendTime < 500 && progress < 100 && !status) {
return; // Throttle normale Progress-Updates
}
String progressMsg = "{\"type\":\"updateProgress\",\"progress\":" + String(progress);
if (status) {
@@ -79,23 +87,13 @@ void sendUpdateProgress(int progress, const char* status = nullptr, const char*
}
progressMsg += "}";
if (progress >= 100) {
// Sende die Nachricht nur einmal für den Abschluss
ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
delay(50);
}
// Sende die Nachricht mehrmals mit Verzögerung für wichtige Updates
if (status || abs(progress - lastSentProgress) >= 10 || progress == 100) {
for (int i = 0; i < 2; i++) {
ws.textAll(progressMsg);
delay(100); // Längerer Delay zwischen Nachrichten
}
} else {
ws.textAll(progressMsg);
delay(50);
}
// Sende Progress-Update (nur einmal, nicht mehrfach)
ws.textAll(progressMsg);
// Yield für WiFi-Stack nach jedem WebSocket-Send
vTaskDelay(pdMS_TO_TICKS(10));
lastSendTime = now;
lastSentProgress = progress;
}
@@ -132,6 +130,7 @@ void handleUpdate(AsyncWebServer &server) {
if (!index) {
updateTotalSize = request->contentLength();
updateWritten = 0;
lastYieldAt = 0; // Reset yield counter
isSpiffsUpdate = (filename.indexOf("website") > -1);
if (isSpiffsUpdate) {
@@ -147,14 +146,14 @@ void handleUpdate(AsyncWebServer &server) {
return;
}
sendUpdateProgress(5, "starting", "Starting SPIFFS update...");
vTaskDelay(pdMS_TO_TICKS(200));
vTaskDelay(pdMS_TO_TICKS(100));
} else {
if (!Update.begin(updateTotalSize)) {
request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
return;
}
sendUpdateProgress(0, "starting", "Starting firmware update...");
vTaskDelay(pdMS_TO_TICKS(200));
vTaskDelay(pdMS_TO_TICKS(100));
}
}
@@ -165,22 +164,30 @@ void handleUpdate(AsyncWebServer &server) {
}
updateWritten += len;
// KRITISCH: Yield alle 32KB für WiFi-Stack bei großen Uploads (1.5-2MB)
// Ohne dies kann der WiFi-Stack blockieren und der Upload hängen bleiben
if (updateWritten - lastYieldAt >= 32768) {
vTaskDelay(pdMS_TO_TICKS(5)); // Kurze Pause für WiFi-Stack
lastYieldAt = updateWritten;
}
int currentProgress;
// Berechne den Fortschritt basierend auf dem Update-Typ
if (isSpiffsUpdate) {
// SPIFFS: 5-75% für Upload
currentProgress = 6 + (updateWritten * 100) / updateTotalSize;
// SPIFFS: 5-100% für Upload
currentProgress = 5 + (updateWritten * 95) / updateTotalSize;
} else {
// Firmware: 0-100% für Upload
currentProgress = 1 + (updateWritten * 100) / updateTotalSize;
currentProgress = (updateWritten * 100) / updateTotalSize;
}
static int lastProgress = -1;
if (currentProgress != lastProgress && (currentProgress % 10 == 0 || final)) {
// Nur alle 5% Progress-Updates senden (reduziert WebSocket-Traffic)
if (currentProgress != lastProgress && (currentProgress % 5 == 0 || final)) {
sendUpdateProgress(currentProgress, "uploading");
oledShowProgressBar(currentProgress, 100, tr(STR_UPDATE), tr(STR_DOWNLOAD));
vTaskDelay(pdMS_TO_TICKS(50));
lastProgress = currentProgress;
}
}
+172 -61
View File
@@ -35,10 +35,22 @@ uint8_t scale_tare_counter = 0;
bool scaleTareRequest = false;
uint8_t pauseMainTask = 0;
bool scaleCalibrated;
bool scaleConnected;
bool autoTare = true;
bool scaleCalibrationActive = false;
volatile bool scaleCalibrationRequest = false;
/**
* Non blocking wait function
*/
void friendlyWait(uint16_t ticks) {
for (uint16_t i = 0; i < ticks; i++) {
yield();
vTaskDelay(pdMS_TO_TICKS(1));
esp_task_wdt_reset();
}
}
// ##### Weight stabilization functions #####
/**
@@ -50,7 +62,7 @@ void resetWeightFilter() {
filteredWeight = 0.0f;
lastDisplayedWeight = 0;
lastStableWeight = 0; // Reset stable weight for API actions
// Initialize buffer with zeros
for (int i = 0; i < MOVING_AVERAGE_SIZE; i++) {
weightBuffer[i] = 0.0f;
@@ -63,11 +75,11 @@ void resetWeightFilter() {
float calculateMovingAverage() {
float sum = 0.0f;
int count = bufferFilled ? MOVING_AVERAGE_SIZE : bufferIndex;
for (int i = 0; i < count; i++) {
sum += weightBuffer[i];
}
return (count > 0) ? sum / count : 0.0f;
}
@@ -88,33 +100,33 @@ int16_t processWeightReading(float rawWeight) {
// Add to moving average buffer
weightBuffer[bufferIndex] = rawWeight;
bufferIndex = (bufferIndex + 1) % MOVING_AVERAGE_SIZE;
if (bufferIndex == 0) {
bufferFilled = true;
}
// Calculate moving average
float avgWeight = calculateMovingAverage();
// Apply low-pass filter
float smoothedWeight = applyLowPassFilter(avgWeight);
// Round to nearest gram
int16_t newWeight = round(smoothedWeight);
// Update displayed weight if display threshold is reached
if (abs(newWeight - lastDisplayedWeight) >= DISPLAY_THRESHOLD) {
lastDisplayedWeight = newWeight;
}
// Update global weight for API actions only if stable threshold is reached
int16_t weightToReturn = weight; // Default: keep current weight
if (abs(newWeight - lastStableWeight) >= API_THRESHOLD) {
lastStableWeight = newWeight;
weightToReturn = newWeight;
}
return weightToReturn;
}
@@ -145,7 +157,7 @@ uint8_t tareScale() {
Serial.println("Tare scale");
scale.tare();
resetWeightFilter();
return 1;
}
@@ -161,13 +173,13 @@ void scale_loop(void * parameter) {
for(;;) {
unsigned long currentTime = millis();
// Only measure at defined intervals to reduce noise
if (currentTime - lastMeasurementTime >= MEASUREMENT_INTERVAL_MS) {
if (scale.is_ready())
if (scale.is_ready())
{
// Waage manuell Taren
if (scaleTareRequest == true || (autoTare && scale_tare_counter >= 20))
if (scaleTareRequest == true || (autoTare && scale_tare_counter >= 20))
{
Serial.println("Re-Tare scale");
oledDisplayText(tr(STR_TARE_SCALE));
@@ -189,16 +201,16 @@ void scale_loop(void * parameter) {
// Get raw weight reading
float rawWeight = scale.get_units();
// Process weight with stabilization
int16_t stabilizedWeight = processWeightReading(rawWeight);
// Update global weight variable only if it changed significantly (for API actions)
if (stabilizedWeight != weight) {
weight = stabilizedWeight;
oledResetActivityTimer(); // Wake display on weight change
}
// Prüfen ob die Waage korrekt genullt ist
// Abweichung von 2g ignorieren
if (autoTare && (rawWeight > 2 && rawWeight < 7) || rawWeight < -2)
@@ -215,15 +227,111 @@ void scale_loop(void * parameter) {
if (currentTime - lastDebugTime > 2000) { // Print every 2 seconds
lastDebugTime = currentTime;
}
lastMeasurementTime = currentTime;
}
}
vTaskDelay(pdMS_TO_TICKS(10)); // Shorter delay for more responsive loop
}
}
long readHX711Raw() {
long value = 0;
for (int i = 0; i < 24; i++) {
digitalWrite(LOADCELL_SCK_PIN, HIGH);
delayMicroseconds(1);
value = (value << 1) | digitalRead(LOADCELL_DOUT_PIN);
digitalWrite(LOADCELL_SCK_PIN, LOW);
delayMicroseconds(1);
}
// Gain = 128 (1 extra pulse)
digitalWrite(LOADCELL_SCK_PIN, HIGH);
delayMicroseconds(1);
digitalWrite(LOADCELL_SCK_PIN, LOW);
return value;
}
bool deepSearchScale() {
// without pull-up resistor (10k) on LOADCELL_DOUT_PIN the hx711 lib functions
// are not reliable in detecting a missing chip
// these tests work even without pull-up resistor
const uint32_t timeout = 1000;
const int samples = 10;
pinMode(LOADCELL_DOUT_PIN, INPUT);
pinMode(LOADCELL_SCK_PIN, OUTPUT);
digitalWrite(LOADCELL_SCK_PIN, LOW);
//delay(500);
friendlyWait(500);
// 1. HX711 vorhanden?
uint32_t start = millis();
while (digitalRead(LOADCELL_DOUT_PIN) == HIGH) {
if (millis() - start > timeout) {
Serial.println("HX711 not found (DOUT stays HIGH).");
return false;
}
}
Serial.println("HX711 seems to answer...");
// 2. Mehrere Werte lesen
long values[samples];
for (int i = 0; i < samples; i++) {
// warten bis bereit
uint32_t t = millis();
while (digitalRead(LOADCELL_DOUT_PIN) == HIGH) {
if (millis() - t > timeout) {
Serial.println("HX711 not found (Timeout during read).");
return false;
}
}
values[i] = readHX711Raw();
delay(50);
}
// 3. Analyse
int invalidCount = 0;
for (int i = 0; i < samples; i++) {
if (values[i] == 0 || values[i] == 0xFFFFFF) {
invalidCount++;
}
}
// 4. Entscheidungen
// Kein Sensor
if (invalidCount > samples / 2) {
Serial.println("HX711 not ready (Loadcell missing).");
return false;
}
Serial.println("HX711 found.");
return true;
}
bool scaleDetected(){
// Step 1: use hx711 library functions (need pull-up resistor to recognize missing hx711)
if ( !(scale.wait_ready_timeout(1000))) {
Serial.println("HX711 not found (pull-up resistor installed).");
return false;
}
//Step 2: when pull-up resistor is missing, then deep search...
return deepSearchScale();
}
void start_scale(bool touchSensorConnected) {
Serial.println("Prüfe Calibration Value");
float calibrationValue;
@@ -238,7 +346,7 @@ void start_scale(bool touchSensorConnected) {
calibrationValue = SCALE_DEFAULT_CALIBRATION_VALUE;
scaleCalibrated = false;
}
// auto Tare
// Wenn Touch Sensor verbunden, dann autoTare auf false setzen
// Danach prüfen was in NVS gespeichert ist
@@ -252,40 +360,43 @@ void start_scale(bool touchSensorConnected) {
scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);
oledShowProgressBar(6, 7, DISPLAY_BOOT_TEXT, tr(STR_SEARCHING_SCALE));
for (uint16_t i = 0; i < 3000; i++) {
yield();
vTaskDelay(pdMS_TO_TICKS(1));
esp_task_wdt_reset();
oledShowProgressBar(5, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_SEARCHING_SCALE));
friendlyWait(3000);
scaleConnected = scaleDetected();
if ( scaleConnected ) {
scale.set_scale(calibrationValue);
//vTaskDelay(pdMS_TO_TICKS(5000));
// Initialize weight stabilization filter
resetWeightFilter();
// Display Gewicht
oledShowWeight(0);
Serial.println("starte Scale Task");
BaseType_t result = xTaskCreatePinnedToCore(
scale_loop, /* Function to implement the task */
"ScaleLoop", /* Name of the task */
2048, /* Stack size in words */
NULL, /* Task input parameter */
scaleTaskPrio, /* Priority of the task */
&ScaleTask, /* Task handle. */
scaleTaskCore); /* Core where the task should run */
if (result != pdPASS) {
Serial.println("Fehler beim Erstellen des ScaleLoop-Tasks");
} else {
Serial.println("ScaleLoop-Task erfolgreich erstellt");
}
}
while(!scale.is_ready()) {
vTaskDelay(pdMS_TO_TICKS(5000));
}
scale.set_scale(calibrationValue);
//vTaskDelay(pdMS_TO_TICKS(5000));
// Initialize weight stabilization filter
resetWeightFilter();
// Display Gewicht
oledShowWeight(0);
Serial.println("starte Scale Task");
BaseType_t result = xTaskCreatePinnedToCore(
scale_loop, /* Function to implement the task */
"ScaleLoop", /* Name of the task */
2048, /* Stack size in words */
NULL, /* Task input parameter */
scaleTaskPrio, /* Priority of the task */
&ScaleTask, /* Task handle. */
scaleTaskCore); /* Core where the task should run */
if (result != pdPASS) {
Serial.println("Fehler beim Erstellen des ScaleLoop-Tasks");
} else {
Serial.println("ScaleLoop-Task erfolgreich erstellt");
else {
// No HX711 - switching to NFC-only mode
Serial.println("Kann kein HX711 Board finden !"); // Sende Text "Kann kein..." an seriellen Monitor
oledDisplayText(tr(STR_HX711_NOT_FOUND));
vTaskDelay(pdMS_TO_TICKS(1500));
oledDisplayText(tr(STR_NOSCALE_MODE));
vTaskDelay(pdMS_TO_TICKS(1500));
}
}
@@ -300,10 +411,10 @@ uint8_t calibrate_scale() {
if (ScaleTask != NULL && xTaskGetCurrentTaskHandle() != ScaleTask) vTaskSuspend(ScaleTask);
pauseMainTask = 1;
if (scale.wait_ready_timeout(1000))
{
scale.set_scale();
oledShowProgressBar(0, 3, tr(STR_SCALE_CAL), tr(STR_EMPTY_SCALE));
@@ -324,7 +435,7 @@ uint8_t calibrate_scale() {
vTaskDelay(pdMS_TO_TICKS(1));
esp_task_wdt_reset();
}
float newCalibrationValue = scale.get_units(10);
Serial.print("Result: ");
Serial.println(newCalibrationValue);
@@ -359,7 +470,7 @@ uint8_t calibrate_scale() {
vTaskDelay(pdMS_TO_TICKS(1));
esp_task_wdt_reset();
}
oledShowProgressBar(3, 3, tr(STR_SCALE_CAL), tr(STR_COMPLETED));
// For some reason it is not possible to re-tare the scale here, it will result in a wdt timeout. Instead let the scale loop do the taring
@@ -387,12 +498,12 @@ uint8_t calibrate_scale() {
esp_task_wdt_reset();
}
returnState = 0;
}
}
}
else
else
{
Serial.println("HX711 not found.");
oledDisplayText(tr(STR_HX711_NOT_FOUND));
for (uint16_t i = 0; i < 30000; i++) {
+1
View File
@@ -23,6 +23,7 @@ extern uint8_t scale_tare_counter;
extern bool scaleTareRequest;
extern uint8_t pauseMainTask;
extern bool scaleCalibrated;
extern bool scaleConnected;
extern bool autoTare;
extern bool scaleCalibrationActive;
extern volatile bool scaleCalibrationRequest;
+43 -50
View File
@@ -18,6 +18,7 @@
#endif
#define NO_CACHE "no-cache, no-store, must-revalidate"
#define CACHE_ASSETS "max-age=86400" // 24h Cache für statische Assets
AsyncWebServer server(webserverPort);
AsyncWebSocket ws("/ws");
@@ -25,6 +26,15 @@ AsyncWebSocket ws("/ws");
uint8_t lastSuccess = 0;
nfcReaderStateType lastnfcReaderState = NFC_IDLE;
// Template-Processor für dynamische Seiten (ESPAsyncWebServer built-in)
// Ersetzt %variable% Platzhalter in HTML-Dateien
String templateProcessor(const String& var) {
if (var == "registered") return filamanRegistered ? "Registered" : "Not Registered";
if (var == "filamanUrl") return filamanUrl;
if (var == "autoTare") return autoTare ? "checked" : "";
return String(); // Unbekannte Variable - leer zurückgeben
}
void sendNfcDataToClient(AsyncWebSocketClient *client) {
if(!client) return;
switch(nfcReaderState){
@@ -114,74 +124,52 @@ void sendNfcData() {
}
void setupWebserver(AsyncWebServer &server) {
oledShowProgressBar(2, 7, DISPLAY_BOOT_TEXT, tr(STR_WEBSERVER_INIT));
oledShowProgressBar(2, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_WEBSERVER_INIT));
ws.onEvent(onWsEvent);
server.addHandler(&ws);
// Static Routes
// ===== STATISCHE ASSETS mit serveStatic() =====
// Optimiert für concurrent Requests, mit 24h Browser-Cache
// serveStatic() ist nicht-blockierend und handhabt parallele Requests besser
server.serveStatic("/style.css", LittleFS, "/style.css")
.setCacheControl(CACHE_ASSETS);
server.serveStatic("/logo.png", LittleFS, "/logo.png")
.setCacheControl(CACHE_ASSETS);
server.serveStatic("/favicon.ico", LittleFS, "/favicon.ico")
.setCacheControl(CACHE_ASSETS);
// ===== STATISCHE HTML-SEITEN (ohne Template-Ersetzung) =====
server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /");
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/index.html", "text/html");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
});
server.on("/waage", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /waage");
String html = readFile("/waage.html");
html.replace("{{autoTare}}", autoTare ? "checked" : "");
auto response = request->beginResponse(200, "text/html", html);
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
});
server.on("/setup", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /setup");
String html = readFile("/setup.html");
html.replace("{{registered}}", filamanRegistered ? "Registered" : "Not Registered");
html.replace("{{filamanUrl}}", filamanUrl);
auto response = request->beginResponse(200, "text/html", html);
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
request->send(LittleFS, "/index.html", "text/html");
});
server.on("/wifi", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /wifi");
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/wifi.html", "text/html");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
request->send(LittleFS, "/wifi.html", "text/html");
});
server.on("/upgrade", HTTP_GET, [](AsyncWebServerRequest *request) {
Serial.println("Web: Request /upgrade");
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/upgrade.html", "text/html");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
request->send(LittleFS, "/upgrade.html", "text/html");
});
server.on("/version.txt", HTTP_GET, [](AsyncWebServerRequest *request){
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/version.txt", "text/plain");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
request->send(LittleFS, "/version.txt", "text/plain");
});
server.on("/style.css", HTTP_GET, [](AsyncWebServerRequest *request){
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/style.css", "text/css");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
// ===== DYNAMISCHE HTML-SEITEN (mit Template-Processor) =====
// Nutzt den eingebauten Template-Processor für %variable% Ersetzung
// Nicht-blockierend: Datei wird gestreamt und Variablen on-the-fly ersetzt
server.on("/waage", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /waage");
request->send(LittleFS, "/waage.html", "text/html", false, templateProcessor);
});
server.on("/logo.png", HTTP_GET, [](AsyncWebServerRequest *request){
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/logo.png", "image/png");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
});
server.on("/favicon.ico", HTTP_GET, [](AsyncWebServerRequest *request){
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/favicon.ico", "image/x-icon");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
server.on("/setup", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /setup");
request->send(LittleFS, "/setup.html", "text/html", false, templateProcessor);
});
// API Routes
@@ -226,7 +214,7 @@ void setupWebserver(AsyncWebServer &server) {
String payloadString;
serializeJson(doc, payloadString);
bool hasSpoolId = !doc["spool_id"].isNull() || !doc["sm_id"].isNull();
int spoolId = doc["spool_id"] | 0;
if (spoolId == 0 && doc["sm_id"].is<String>()) {
@@ -235,7 +223,7 @@ void setupWebserver(AsyncWebServer &server) {
int locationId = doc["location_id"] | 0;
startWriteJsonToTag(hasSpoolId, payloadString.c_str(), spoolId, locationId);
// Respond immediately
request->send(200, "application/json", "{\"success\": true, \"message\": \"Schreibvorgang wurde gestartet. Bitte Tag bereit halten...\"}");
});
@@ -297,6 +285,11 @@ void setupWebserver(AsyncWebServer &server) {
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/api/v1/rfid/scan-request", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
setScanRequest(true);
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/reboot", HTTP_GET, [](AsyncWebServerRequest *request){
request->send(200, "text/plain", "Rebooting...");
delay(500);
+74 -38
View File
@@ -14,19 +14,57 @@ uint8_t wifiErrorCounter = 0;
void wifiSettings() {
// Standard WiFi-Einstellungen für höchste Stabilität mit ESPAsyncWebServer
WiFi.mode(WIFI_STA);
WiFi.mode(WIFI_STA);
WiFi.setHostname("FilaMan");
// Wir lassen das Power Management (Sleep) auf dem ESP-Standard.
// Ein erzwungenes Ausschalten führt zu RF-Abstürzen bei vielen asynchronen HTTP-Requests.
// ESP32-Core Auto-Reconnect aktivieren (unabhängig vom WiFiManager-Flag).
// Sorgt dafür, dass der WiFi-Stack autonom direkt nach einem Disconnect
// neu verbindet, ohne auf das 15s-Polling in checkWiFiConnection() warten zu müssen.
WiFi.setAutoReconnect(true);
WiFi.persistent(true);
// KRITISCH: Power-Save deaktivieren für stabilen Webserver-Betrieb
// Ohne dies geht WiFi in Modem-Sleep und verpasst Requests/Responses
// Dies ist die Hauptursache für Verbindungsabbrüche bei regelmäßigen API-Calls
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
// Angemessene Sendeleistung (reduziert Hitzeprobleme)
WiFi.setTxPower(WIFI_POWER_17dBm); // Set stable transmit power (default is 19.5 which gets hot)
// Wir überlassen die Protokoll-Aushandlung (b/g/n) dem Treiber. Harte Vorgaben crashen unter Last.
// Aktiviere WiFi-Roaming für bessere Stabilität
esp_wifi_set_rssi_threshold(-80);
WiFi.setTxPower(WIFI_POWER_17dBm);
// Hinweis: Kein esp_wifi_set_rssi_threshold() mehr.
// Der vorherige Wert (-80 dBm) löste in Single-AP-Heimnetzen häufige
// Disconnects aus, sobald das Signal in den normalen Wohnungs-Empfangsbereich
// fiel. Ohne Mesh-/Roaming-Setup bringt der Threshold keinen Vorteil.
}
// Reagiert sofort auf Verbindungsverlust, statt bis zum nächsten
// checkWiFiConnection()-Tick zu warten. Das ESP32-Auto-Reconnect übernimmt
// die eigentliche Wiederherstellung; hier nur Logging + Display-Update.
void onWiFiEvent(WiFiEvent_t event, WiFiEventInfo_t info) {
switch (event) {
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
Serial.printf("WiFi event: STA_DISCONNECTED, reason=%u\n",
info.wifi_sta_disconnected.reason);
if (wifiOn) {
wifiOn = false;
oledShowTopRow();
}
break;
case ARDUINO_EVENT_WIFI_STA_GOT_IP:
Serial.print("WiFi event: STA_GOT_IP ");
Serial.println(WiFi.localIP());
wifiOn = true;
wifiErrorCounter = 0;
// Power-Save nach Reconnect erneut deaktivieren (wird vom Stack
// gelegentlich zurückgesetzt).
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
oledShowTopRow();
break;
default:
break;
}
}
void configModeCallback (WiFiManager *myWiFiManager) {
@@ -39,6 +77,10 @@ void initWiFi() {
// load Wifi settings
wifiSettings();
// WiFi-Events abonnieren, bevor autoConnect() läuft, damit auch frühe
// Disconnects/Reconnects schon erfasst werden.
WiFi.onEvent(onWiFiEvent);
wm.setAPCallback(configModeCallback);
wm.setSaveConfigCallback([]() {
@@ -48,22 +90,25 @@ void initWiFi() {
if(wm_nonblocking) wm.setConfigPortalBlocking(false);
//wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
wm.setWiFiAutoReconnect(true);
// WiFiManager-Reconnect deaktiviert: der ESP32-Stack übernimmt das via
// setAutoReconnect(true). Zwei parallele Reconnect-Mechanismen erzeugen
// sonst einen Verbindungssturm, der den Router zu AUTH_EXPIRE-Kicks verleitet.
wm.setWiFiAutoReconnect(false);
wm.setConnectTimeout(10);
oledShowProgressBar(1, 7, DISPLAY_BOOT_TEXT, tr(STR_WIFI_INIT));
oledShowProgressBar(1, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_WIFI_INIT));
//bool res = wm.autoConnect("FilaMan"); // anonymous ap
if(!wm.autoConnect("FilaMan")) {
Serial.println("Failed to connect or hit timeout");
// ESP.restart();
oledShowTopRow();
oledDisplayText(tr(STR_WIFI_NOT_CONNECTED));
}
}
else {
wifiOn = true;
//if you get here you have connected to the WiFi
//if you get here you have connected to the WiFi
Serial.println("connected...yeey :)");
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
@@ -73,35 +118,26 @@ void initWiFi() {
}
void checkWiFiConnection() {
if (WiFi.status() != WL_CONNECTED)
if (WiFi.status() != WL_CONNECTED)
{
if (wifiOn) {
Serial.println("WiFi connection lost. LwIP is auto-reconnecting...");
wifiOn = false;
oledShowTopRow();
oledDisplayText(tr(STR_WIFI_RECONNECTING));
}
// setAutoReconnect(true) übernimmt die Wiederverbindung automatisch.
// Hier nur Display-Update und Fehler zählen für den Neustart-Watchdog.
oledDisplayText(tr(STR_WIFI_RECONNECTING));
wifiErrorCounter++;
// Only restart after a significant time of no connection (e.g. 5 minutes)
// Assuming WIFI_CHECK_INTERVAL is 60000ms (1 minute), 5 errors = 5 minutes
if (wifiErrorCounter >= 5)
// Nach ca. 5 Minuten ohne Verbindung Neustart (bei WIFI_CHECK_INTERVAL
// = 15s entspricht das 20 Fehlern).
const uint8_t maxErrors = (uint8_t)(300000UL / WIFI_CHECK_INTERVAL);
if (wifiErrorCounter >= maxErrors)
{
Serial.println("WiFi unable to reconnect for 5 minutes. Restarting...");
Serial.println("WiFi unable to reconnect for ~5 minutes. Restarting...");
ESP.restart();
}
}
else
{
if (!wifiOn) {
Serial.println("WiFi reconnected.");
wifiErrorCounter = 0;
wifiOn = true;
oledShowTopRow();
} else {
// Reset error counter if we are connected (just to be safe)
wifiErrorCounter = 0;
}
// Connected: Fehlerzähler zurücksetzen. wifiOn wird vom GOT_IP-Event
// gepflegt, daher hier nichts weiter zu tun.
wifiErrorCounter = 0;
}
}
}