fix(config): restore ESP32 Dev Board pin numbers, gate S3 pins behind CONFIG_IDF_TARGET_ESP32S3

PR #14 (0f43f22) unconditionally replaced the classic ESP32 Dev Board
pin numbers for PN532 (NFC), HX711 (scale) and TTP223 (touch) with the
ESP32-S3 values in the single shared src/config.cpp, even though the
esp32dev build environment (used for all standard-hardware releases)
still links against it unchanged. This caused nfc.begin() to talk to
the wrong physical pins on ESP32 Dev Board hardware, producing a
watchdog reset during NFC init and a subsequent bootloop.

Verified via objdump on both compiled config.cpp.o that esp32dev now
resolves to 32/33/16/17/25 and esp32-s3-devkitc-1 to 15/16/19/20/7.
This commit is contained in:
ManuelW77 committed 2026-08-21 15:46:04 +02:00
1 parent a7b97dc0c9
commit 6f9c99edb6
1 file changed
+19 -5
+19 -5
View File
@@ -6,21 +6,35 @@
//#define PN532_MOSI 23
//#define PN532_SS 5
//#define PN532_MISO 19
const uint8_t PN532_IRQ = 15; //32 for ESP32 Dev, 15 for ESP32-S3;
const uint8_t PN532_RESET = 16; //33 for ESP32 Dev, 16 for ESP32-S3;
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t PN532_IRQ = 15;
const uint8_t PN532_RESET = 16;
#else
const uint8_t PN532_IRQ = 32;
const uint8_t PN532_RESET = 33;
#endif
// ***** PN532
// ***** HX711 (Waage)
// HX711 circuit wiring
const uint8_t LOADCELL_DOUT_PIN = 19; //16 for ESP32 Dev, 19 for ESP32-S3;
const uint8_t LOADCELL_SCK_PIN = 20; //17 for ESP32 Dev, 20 for ESP32-S3;
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t LOADCELL_DOUT_PIN = 19;
const uint8_t LOADCELL_SCK_PIN = 20;
#else
const uint8_t LOADCELL_DOUT_PIN = 16;
const uint8_t LOADCELL_SCK_PIN = 17;
#endif
const uint8_t calVal_eepromAdress = 0;
const uint16_t SCALE_LEVEL_WEIGHT = 500;
// ***** HX711
// ***** TTP223 (Touch Sensor)
// TTP223 circuit wiring
const uint8_t TTP223_PIN = 7; //25 for ESP32 Dev, 7 for ESP32-S3;
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t TTP223_PIN = 7;
#else
const uint8_t TTP223_PIN = 25;
#endif
// ***** TTP223