Compare commits

..
9 Commits
Author SHA1 Message Date
ManuelW77 028fe85586 docs: update platformio.ini for version v3.4.6 2026-08-21 15:50:02 +02:00
ManuelW77andRaul Santamaria 27e16c3d1b fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 15:48:52 +02:00
ManuelW77 6f9c99edb6 fix(config): restore ESP32 Dev Board pin numbers, gate S3 pins behind CONFIG_IDF_TARGET_ESP32S3
PR #14 (0f43f22) unconditionally replaced the classic ESP32 Dev Board
pin numbers for PN532 (NFC), HX711 (scale) and TTP223 (touch) with the
ESP32-S3 values in the single shared src/config.cpp, even though the
esp32dev build environment (used for all standard-hardware releases)
still links against it unchanged. This caused nfc.begin() to talk to
the wrong physical pins on ESP32 Dev Board hardware, producing a
watchdog reset during NFC init and a subsequent bootloop.

Verified via objdump on both compiled config.cpp.o that esp32dev now
resolves to 32/33/16/17/25 and esp32-s3-devkitc-1 to 15/16/19/20/7.
2026-08-21 15:46:04 +02:00
ManuelW77 a7b97dc0c9 docs: update platformio.ini for version v3.4.5 2026-08-21 15:12:12 +02:00
ManuelW77 2bae0369fa docs: update platformio.ini for version v3.4.4 2026-08-20 12:43:04 +02:00
ManuelW77 1c3aae5f49 update: increment version to 3.4.3 in platformio.ini 2026-08-20 12:42:57 +02:00
ManuelW77 4054a96067 merge: sync devel with main
devel was 16 commits behind main and had diverged with the
esp32-s3-devkitc-1 board support (PR #14) that never made it back to
main. Merges main into devel so both stay on the same feature/fix
baseline; resolves the platformio.ini conflict by keeping devel's
shared [env] section (used by both esp32dev and esp32-s3-devkitc-1)
and carrying forward main's AsyncTCP watchdog fix
(-DCONFIG_ASYNC_TCP_USE_WDT=0).
2026-08-20 09:32:41 +02:00
ManuelW 0d38728072 Merge pull request #14 from KollegeChris/esp32-s3
Added configuration for esp32-s3
2026-05-19 11:09:07 +02:00
Christoph Stoiber 0f43f228e7 Added configuration for esp32-s3 2026-05-05 21:20:57 +02:00
4 changed files with 81 additions and 66 deletions

No files matched your search

Binary file not shown.
+52 -64
View File
@@ -9,81 +9,69 @@
; https://docs.platformio.org/page/projectconf.html
[common]
version = "3.4.2"
version = "3.4.6"
to_old_version = "3.4.0"
##
[env:esp32dev]
platform = espressif32@^6.0.0
board = esp32dev
framework = arduino
monitor_speed = 115200
#monitor_port = /dev/cu.usbmodem01
lib_deps =
tzapu/WiFiManager @ ^2.0.17
https://github.com/me-no-dev/ESPAsyncWebServer.git#master
https://github.com/esphome/AsyncTCP.git
bogde/HX711 @ ^0.7.5
adafruit/Adafruit SSD1306 @ ^2.5.13
adafruit/Adafruit GFX Library @ ^1.11.11
adafruit/Adafruit PN532 @ ^1.3.3
bblanchon/ArduinoJson @ ^7.3.0
knolleary/PubSubClient @ ^2.8
digitaldragon/SSLClient @ ^1.3.2
; Enable SPIFFS upload
board_build.filesystem = littlefs
; Update partition settings
board_build.partitions = partitions.csv
board_upload.flash_size = 4MB
board_build.flash_mode = dio
board_upload.flash_freq = "40m"
build_flags =
-Os
-ffunction-sections
-fdata-sections
#-DNDEBUG
-mtext-section-literals
-DVERSION=\"${common.version}\"
-DTOOLDVERSION=\"${common.to_old_version}\"
#-DENABLE_HEAP_DEBUGGING
-DASYNCWEBSERVER_REGEX
#-DCORE_DEBUG_LEVEL=3
-DCONFIG_ARDUHAL_LOG_COLORS=1
#-DOTA_DEBUG=1
-DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-DBOOT_APP_PARTITION_OTA_0=1
# ===== AsyncTCP Optimierungen - KRITISCH für WiFi-Stabilität =====
# Core 1 = Arduino/App Core (nicht Core 0 = WiFi/Protocol Core!)
# Schwere Callbacks auf Core 0 stören das WiFi-Radio
-DCONFIG_ASYNC_TCP_RUNNING_CORE=1
# Längerer ACK-Timeout für instabile Verbindungen (10s statt 5s)
-DCONFIG_ASYNC_TCP_MAX_ACK_TIME=10000
# Größere Queue für mehr gleichzeitige Requests
-DCONFIG_ASYNC_TCP_QUEUE_SIZE=128
# Mehr Stack für komplexere Callbacks (8KB statt 16KB default, spart RAM)
-DCONFIG_ASYNC_TCP_STACK_SIZE=8192
# Standard-Priorität beibehalten
-DCONFIG_ASYNC_TCP_PRIORITY=10
# WDT für AsyncTCP deaktiviert: Mit aktivem WDT konnten langsame
# WebSocket-Sender (z. B. große ws.textAll-JSONs) den AsyncTCP-Task
# killen und so alle Clients abwerfen.
-DCONFIG_ASYNC_TCP_USE_WDT=0
# ===== LwIP Optimierungen für OTA-Uploads (1.5-2MB) =====
# Schnellere Socket-Freigabe (30s statt 60s TIME_WAIT)
-DCONFIG_LWIP_TCP_MSL=30000
# Größerer RX-Buffer für große Uploads (8KB statt 4KB)
-DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=8192
# Max aktive TCP-Verbindungen (unverändert)
-DCONFIG_LWIP_MAX_ACTIVE_TCP=16
extra_scripts =
scripts/extra_script.py
extra_scripts = scripts/extra_script.py
[platformio]
default_envs = esp32dev
default_envs =
esp32dev
esp32-s3-devkitc-1
[env]
build_flags =
-Os
-ffunction-sections
-fdata-sections
-mtext-section-literals
-DVERSION=\"${common.version}\"
-DTOOLDVERSION=\"${common.to_old_version}\"
-DASYNCWEBSERVER_REGEX
-DCONFIG_ARDUHAL_LOG_COLORS=1
-DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-DBOOT_APP_PARTITION_OTA_0=1
-DCONFIG_ASYNC_TCP_RUNNING_CORE=1
-DCONFIG_ASYNC_TCP_MAX_ACK_TIME=10000
-DCONFIG_ASYNC_TCP_QUEUE_SIZE=128
-DCONFIG_ASYNC_TCP_STACK_SIZE=8192
-DCONFIG_ASYNC_TCP_PRIORITY=10
# WDT für AsyncTCP deaktiviert: Mit aktivem WDT konnten langsame
# WebSocket-Sender (z. B. große ws.textAll-JSONs) den AsyncTCP-Task
# killen und so alle Clients abwerfen.
-DCONFIG_ASYNC_TCP_USE_WDT=0
-DCONFIG_LWIP_TCP_MSL=30000
-DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=8192
-DCONFIG_LWIP_MAX_ACTIVE_TCP=16
lib_deps =
tzapu/WiFiManager
https://github.com/me-no-dev/ESPAsyncWebServer.git#master
https://github.com/esphome/AsyncTCP.git
bogde/HX711 @ ^0.7.5
adafruit/Adafruit SSD1306 @ ^2.5.13
adafruit/Adafruit GFX Library @ ^1.11.11
adafruit/Adafruit PN532 @ ^1.3.3
bblanchon/ArduinoJson @ ^7.3.0
knolleary/PubSubClient @ ^2.8
digitaldragon/SSLClient @ ^1.3.2
monitor_speed = 115200
[env:esp32-s3-devkitc-1]
board = esp32-s3-devkitc-1
framework = arduino
extra_scripts = scripts/extra_script.py
upload_protocol = esptool
board_build.flash_mode = dio
platform = espressif32
board_build.filesystem = littlefs
board_build.partitions = partitions.csv
board_upload.flash_size = 8MB
+16 -2
View File
@@ -6,21 +6,35 @@
//#define PN532_MOSI 23
//#define PN532_SS 5
//#define PN532_MISO 19
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t PN532_IRQ = 15;
const uint8_t PN532_RESET = 16;
#else
const uint8_t PN532_IRQ = 32;
const uint8_t PN532_RESET = 33;
#endif
// ***** PN532
// ***** HX711 (Waage)
// HX711 circuit wiring
const uint8_t LOADCELL_DOUT_PIN = 16; //16;
const uint8_t LOADCELL_SCK_PIN = 17; //17;
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t LOADCELL_DOUT_PIN = 19;
const uint8_t LOADCELL_SCK_PIN = 20;
#else
const uint8_t LOADCELL_DOUT_PIN = 16;
const uint8_t LOADCELL_SCK_PIN = 17;
#endif
const uint8_t calVal_eepromAdress = 0;
const uint16_t SCALE_LEVEL_WEIGHT = 500;
// ***** HX711
// ***** TTP223 (Touch Sensor)
// TTP223 circuit wiring
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t TTP223_PIN = 7;
#else
const uint8_t TTP223_PIN = 25;
#endif
// ***** TTP223
+13
View File
@@ -13,6 +13,17 @@
//Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, PN532_SS);
Adafruit_PN532 nfc(PN532_IRQ, PN532_RESET);
// Adafruit_PN532::begin() toggles RSTPDN too briefly (~1ms/2ms) for some PN532
// modules to reliably leave powerdown, which then makes getFirmwareVersion()
// return 0 right after begin(). Pulse it explicitly with more margin first.
static void pulsePn532Reset() {
pinMode(PN532_RESET, OUTPUT);
digitalWrite(PN532_RESET, LOW);
delay(50);
digitalWrite(PN532_RESET, HIGH);
delay(200);
}
TaskHandle_t RfidReaderTask;
// AsyncWebServerRequest* volatile activeNfcWriteRequest = nullptr; // Removed
SemaphoreHandle_t nfcRequestMutex = NULL;
@@ -561,6 +572,7 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
Serial.println("1. Neuinitialisierung des PN532...");
// Reinitialize the PN532
pulsePn532Reset();
nfc.begin();
vTaskDelay(pdMS_TO_TICKS(500)); // Give it time to initialize
@@ -2335,6 +2347,7 @@ void scanRfidTask(void * parameter) {
void startNfc() {
nfcRequestMutex = xSemaphoreCreateMutex();
oledShowProgressBar(4, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_NFC_INIT));
pulsePn532Reset();
nfc.begin(); // Beginne Kommunikation mit RFID Leser
delay(1000);