Updated Getting started (markdown)

Gabriel Koppenstein committed 2023-12-14 21:50:22 +01:00
1 parent d0cc264083
commit f799ef4d81
1 file changed
+1 -1
+1 -1
@@ -16,7 +16,7 @@ To build the software and run it on the Controller we need to interface the RP20
### Windows
1. Download and install [Pico setup for Windows](https://github.com/raspberrypi/pico-setup-windows) and make sure to check the box for also installing Zadig.
1. Download and install [Pico setup for Windows](https://github.com/raspberrypi/pico-setup-windows) and make sure to check the box for also installing Zadig. You might also need to install [Build Tools for Visual Studio 2022](https://visualstudio.microsoft.com/downloads/)
2. Clone and build Pico repos either by checking the box at the end of the setup.
3. Connect Raspberry Pi Pico via USB while holding the reset button. Your Pi Pico should now be visible in Windows explorer as a mass storage device.
4. Download the latest prebuilt "picoprobe.uf2" release binary from [here](https://github.com/raspberrypi/picoprobe/releases) or download it from the [Raspberry Pi Website](https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html#debugging-using-another-raspberry-pi-pico). Alternatively, you can get the file by navigating to the picoprobe/build subfolder.