Fixed incorred link regarding picoprobe

Gabriel Koppenstein committed 2023-05-28 15:06:28 +02:00
1 parent 847d0ea127
commit d0cc264083
1 file changed
+1 -1
+1 -1
@@ -19,7 +19,7 @@ To build the software and run it on the Controller we need to interface the RP20
1. Download and install [Pico setup for Windows](https://github.com/raspberrypi/pico-setup-windows) and make sure to check the box for also installing Zadig.
2. Clone and build Pico repos either by checking the box at the end of the setup.
3. Connect Raspberry Pi Pico via USB while holding the reset button. Your Pi Pico should now be visible in Windows explorer as a mass storage device.
4. Download the latest prebuilt "picoprobe.uf2" release binary from [here](https://github.com/raspberrypi/pico-setup-windows) or download it from the [Raspberry Pi Website](https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html#debugging-using-another-raspberry-pi-pico). Alternatively, you can get the file by navigating to the picoprobe/build subfolder.
4. Download the latest prebuilt "picoprobe.uf2" release binary from [here](https://github.com/raspberrypi/picoprobe/releases) or download it from the [Raspberry Pi Website](https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html#debugging-using-another-raspberry-pi-pico). Alternatively, you can get the file by navigating to the picoprobe/build subfolder.
5. Copy "picoprobe.uf2" to your Pi Pico. The Pi Pico onboard LED should now light up.
6. Navigate to the tools subfolder in your installation folder and open zadig.exe
7. Install the picoprobe driver using "zadig.exe" as shown in [Getting started with Raspberry Pi Pico - Appendix A - Page 62](https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf#%5B%7B%22num%22%3A65%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C115%2C692.106%2Cnull%5D)