Updated Getting started (markdown)
1 parent
7895ae23ee
commit
847d0ea127
1 file changed
+2
-3
+2
-3
@@ -52,6 +52,5 @@ Another important note is that when the decoder is put into operation for the fi
|
||||
|
||||
## 5. If it's not working as expected
|
||||
|
||||
- check the power supply of the decoder (from rails and the +3.3V)
|
||||
- if the motor acts strange desolder the wires to the motor and try the motor with a analog power supply 0..+-16V to check if the motor is working or not (desolder the wires because the decoder doesn't like electricity on these pins!)
|
||||
- try to reset the decoder by writing 8 to CV8 (beware, this will reset the complete CV memory!)
|
||||
1. Follow the [Troubleshooting instructions](https://github.com/gab-k/RP2040-Decoder/wiki/Troubleshooting)
|
||||
2. If you still have trouble create a new [discussion](https://github.com/gab-k/RP2040-Decoder/discussions) or [issue](https://github.com/gab-k/RP2040-Decoder/issues) and describe your question/issue.
|
||||
Reference in new issue
Block a user