From f799ef4d817d427dbd20fdf9c855e02a42cafe58 Mon Sep 17 00:00:00 2001 From: Gabriel Koppenstein <82903393+gab-k@users.noreply.github.com> Date: Thu, 14 Dec 2023 21:50:22 +0100 Subject: [PATCH] Updated Getting started (markdown) --- Getting-started.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Getting-started.md b/Getting-started.md index 4089f95..12cac45 100644 --- a/Getting-started.md +++ b/Getting-started.md @@ -16,7 +16,7 @@ To build the software and run it on the Controller we need to interface the RP20 ### Windows -1. Download and install [Pico setup for Windows](https://github.com/raspberrypi/pico-setup-windows) and make sure to check the box for also installing Zadig. +1. Download and install [Pico setup for Windows](https://github.com/raspberrypi/pico-setup-windows) and make sure to check the box for also installing Zadig. You might also need to install [Build Tools for Visual Studio 2022](https://visualstudio.microsoft.com/downloads/) 2. Clone and build Pico repos either by checking the box at the end of the setup. 3. Connect Raspberry Pi Pico via USB while holding the reset button. Your Pi Pico should now be visible in Windows explorer as a mass storage device. 4. Download the latest prebuilt "picoprobe.uf2" release binary from [here](https://github.com/raspberrypi/picoprobe/releases) or download it from the [Raspberry Pi Website](https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html#debugging-using-another-raspberry-pi-pico). Alternatively, you can get the file by navigating to the picoprobe/build subfolder.