Compare commits

...
45 Commits
Author SHA1 Message Date
ManuelW77 8f4c67eb46 docs: update platformio.ini for version v3.4.10 2026-10-03 11:55:06 +02:00
ManuelW cb3d3952b0 Merge pull request #30 from anderl1969/fix/main-loop-indentation
style: fix indentation in main loop
2026-10-03 11:54:16 +02:00
anderl1969 3662422c1c style: fix indentation in main loop 2026-09-30 16:23:45 +02:00
ManuelW77 a04cc37190 docs: update platformio.ini for version v3.4.9 2026-09-20 13:44:05 +02:00
ManuelW 7e6854cd8a Merge pull request #28 from Fire-Devils/feature/wifi-txpower-setting
Make WiFi TX power configurable, document ESP32-S3 pins
2026-09-20 12:46:54 +02:00
ManuelW77andClaude Opus 5 a5ba8a901a Make WiFi TX power configurable, document ESP32-S3 pins
The transmit power was hardcoded to 19.5 dBm. Some setups need a lower
value (device right next to the AP, weak 3.3V rail), so it is now a user
setting instead of a per-chip constant.

- wlan.cpp: load/save/apply TX power (0.1 dBm steps, NVS key wifi_txpwr,
  default 195), re-applied on GOT_IP so it survives a reconnect
- website.cpp: /api/wifi-power GET/POST with validation
- setup.html: "WiFi Settings" card
- README.md/README.de.md: pin table gets an ESP32-S3 column plus a warning
  that GPIO19/20 are the native USB data lines
- config.cpp: same warning next to the HX711 pin definitions

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-20 12:42:13 +02:00
ManuelW b8cfa1ce98 Merge pull request #27 from KollegeChris/main
Optimizations for ESP32S3
2026-09-20 12:40:37 +02:00
Christoph Stoiber 884c8bcf8f Comment adjusted for ESP32-S3 2026-09-18 13:09:31 +02:00
Christoph Stoiber 502c1d6ab8 Restore wlan power 2026-09-18 13:05:00 +02:00
Christoph Stoiber 3e995faa8c Changed HX711 Pins 2026-09-18 12:06:50 +02:00
Christoph Stoiber 4b93362dd7 Improved for ESP32S3 2026-09-17 18:07:53 +02:00
ManuelW 9a1d394bc8 Merge pull request #26 from anderl1969/doc/printfileslite
Doc/printfileslite
2026-08-27 13:47:02 +02:00
anderl1969 fab9fdae87 Add readme for FilaMan Lite with version details
Added details about low and high version casing dimensions and NFC connection issues.
2026-08-25 09:10:10 +02:00
anderl1969 1939c1b57f Add print files section to english NFC-only mode documentation
Added section for print files with STL links.
2026-08-25 09:01:58 +02:00
anderl1969 026cbd5179 Fix link to STL files in NFC-only mode documentation 2026-08-25 09:00:40 +02:00
anderl1969 15c66af948 Add Druck-Dateien section to NFC-only mode documentation
Added section for print files and STL resources.
2026-08-25 08:53:55 +02:00
anderl1969 8b746b204a added STLs for FilaMan Lite case (without scale) 2026-08-25 08:49:04 +02:00
ManuelW77 5241969c57 docs: update platformio.ini for version v3.4.8 2026-08-21 16:45:42 +02:00
ManuelW77 80825c6cfc fix(net): unblock AsyncTCP during device registration, max TX power, roaming diagnostics
Three independent improvements to the WiFi/webserver stability:

1. /api/register called registerDevice() directly inside the AsyncWebServer
   body handler. That function does a blocking HTTPClient POST with a 5s
   timeout, freezing the AsyncTCP task and tearing down every in-flight HTTP
   and WebSocket connection. It now goes through the existing apiQueue /
   filamanApiTask machinery: the endpoint answers 202 immediately (or 503 if
   the queue is full, which would otherwise leave the UI waiting forever) and
   the outcome is pushed to the browser as a "registerResult" WebSocket
   message. setup.html waits for that message instead of the HTTP response.

2. TX power raised from 17dBm to the 19.5dBm maximum. The reduced setting was
   a compromise against heat, but at marginal signal levels it invites
   AP-side auth/assoc kicks (reason=2/4/9/202).

3. Disconnect/GOT_IP logging now includes BSSID, RSSI and channel, so a device
   bouncing between two APs (mesh/repeater with separate DHCP scopes) can be
   told apart from webserver-induced drops.

Both build environments verified.
2026-08-21 16:43:00 +02:00
ManuelW77andRaul Santamaria 337d7f8983 fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 16:32:07 +02:00
ManuelW77 6749022243 docs: update platformio.ini for version v3.4.7 2026-08-21 16:13:49 +02:00
ManuelW77 1da123a01f Revert "fix(nfc): pulse PN532 RSTPDN before begin()"
This reverts commit 27e16c3d1b.
2026-08-21 16:11:13 +02:00
ManuelW77 028fe85586 docs: update platformio.ini for version v3.4.6 2026-08-21 15:50:02 +02:00
ManuelW77andRaul Santamaria 27e16c3d1b fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 15:48:52 +02:00
ManuelW77 6f9c99edb6 fix(config): restore ESP32 Dev Board pin numbers, gate S3 pins behind CONFIG_IDF_TARGET_ESP32S3
PR #14 (0f43f22) unconditionally replaced the classic ESP32 Dev Board
pin numbers for PN532 (NFC), HX711 (scale) and TTP223 (touch) with the
ESP32-S3 values in the single shared src/config.cpp, even though the
esp32dev build environment (used for all standard-hardware releases)
still links against it unchanged. This caused nfc.begin() to talk to
the wrong physical pins on ESP32 Dev Board hardware, producing a
watchdog reset during NFC init and a subsequent bootloop.

Verified via objdump on both compiled config.cpp.o that esp32dev now
resolves to 32/33/16/17/25 and esp32-s3-devkitc-1 to 15/16/19/20/7.
2026-08-21 15:46:04 +02:00
ManuelW77 a7b97dc0c9 docs: update platformio.ini for version v3.4.5 2026-08-21 15:12:12 +02:00
ManuelW77 2bae0369fa docs: update platformio.ini for version v3.4.4 2026-08-20 12:43:04 +02:00
ManuelW77 1c3aae5f49 update: increment version to 3.4.3 in platformio.ini 2026-08-20 12:42:57 +02:00
ManuelW77 4054a96067 merge: sync devel with main
devel was 16 commits behind main and had diverged with the
esp32-s3-devkitc-1 board support (PR #14) that never made it back to
main. Merges main into devel so both stay on the same feature/fix
baseline; resolves the platformio.ini conflict by keeping devel's
shared [env] section (used by both esp32dev and esp32-s3-devkitc-1)
and carrying forward main's AsyncTCP watchdog fix
(-DCONFIG_ASYNC_TCP_USE_WDT=0).
2026-08-20 09:32:41 +02:00
ManuelW77 f6b6df55c8 docs: update platformio.ini for version v3.4.2 2026-08-12 10:18:20 +02:00
ManuelW77 f3426119e8 fix: update JSON handling to support spool_id and sm_id interchangeably 2026-08-12 10:14:35 +02:00
Manuel Weiser dd508e2e1e fix: update release flow 2026-08-09 16:04:09 +02:00
Manuel Weiser 0ab3db5f2d update version 2026-08-09 15:37:24 +02:00
Manuel Weiser f86d71f8b2 docs: update platformio.ini for beta version v3.4.0-beta1 2026-05-28 19:43:01 +02:00
Manuel Weiser b2ac1e9fcd Merge branch 'devel' 2026-05-28 19:42:53 +02:00
Manuel Weiser f2c1d44f5a chore: update version to 3.4.0 in platformio.ini 2026-05-28 19:42:15 +02:00
Manuel Weiser 3c9a0f17ba docs: update platformio.ini for beta version v3.3.2-beta1 2026-05-28 19:37:26 +02:00
Manuel Weiser 6a9acb9d27 feat: implement scan request handling with timeout and error reporting 2026-05-28 18:58:10 +02:00
Manuel Weiser 9b93d219f9 fix: skip fast-path detection for known spools when a scan request is active 2026-05-28 18:26:08 +02:00
Manuel Weiser f3f51cd6f8 fix: disable WiFiManager auto-reconnect to prevent connection storms 2026-05-28 17:48:42 +02:00
Manuel Weiser 9d3a3411fb feat: enhance RFID tag detection with NDEF support and improved error handling 2026-05-28 17:31:35 +02:00
Manuel Weiser 775700f90f feat: add tag data handling and scan request functionality 2026-05-28 17:04:24 +02:00
Manuel Weiser 9456e6ab91 feat: add support for extended-data tags with OpenSpool/FilaMan protocol 2026-05-28 16:28:13 +02:00
ManuelW 0d38728072 Merge pull request #14 from KollegeChris/esp32-s3
Added configuration for esp32-s3
2026-05-19 11:09:07 +02:00
Christoph Stoiber 0f43f228e7 Added configuration for esp32-s3 2026-05-05 21:20:57 +02:00
24 changed files with 621 additions and 210 deletions

No files matched your search

+1 -1
View File
@@ -35,7 +35,7 @@ jobs:
gitea-release:
needs: detect-provider
if: needs.detect-provider.outputs.provider == 'gitea'
if: needs.detect-provider.outputs.provider == 'gitea' && !contains(github.ref_name, '-beta')
uses: ./.github/workflows/gitea-release.yml
secrets:
GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+15 -11
View File
@@ -111,17 +111,21 @@ Wenn Sie einen Hersteller-NFC-Tag zum ersten Mal scannen:
### Pin-Konfiguration
| Komponente | ESP32 Pin |
|-------------------|-----------|
| HX711 DOUT | 16 |
| HX711 SCK | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
| Komponente | ESP32 Pin | ESP32-S3 Pin |
|-------------------|-----------|--------------|
| HX711 DOUT | 16 | 5 |
| HX711 SCK | 17 | 6 |
| OLED SDA | 21 | 8 |
| OLED SCL | 22 | 9 |
| PN532 IRQ | 32 | 15 |
| PN532 RESET | 33 | 16 |
| PN532 SDA | 21 | 8 |
| PN532 SCL | 22 | 9 |
| TTP223 I/O | 25 | 7 |
Die I2C-Pins sind die Arduino-Standardwerte des jeweiligen Chips und werden im Code nicht explizit gesetzt.
**!! ESP32-S3: GPIO19/GPIO20 nicht für den HX711 verwenden.** Das sind die nativen USB-Datenleitungen (D-/D+), die auf dem DevKitC-1 an der "USB"-Buchse liegen. Der HX711 wird dort nur unzuverlässig erkannt.
**!! Stellen Sie sicher, dass die DIP-Schalter am PN532 auf I2C eingestellt sind.**
**Verwenden Sie den 3V-Pin des ESP für den Touch-Sensor.**
+15 -11
View File
@@ -111,17 +111,21 @@ When you scan a manufacturer NFC tag for the first time:
### Pin Configuration
| Component | ESP32 Pin |
|-------------------|-----------|
| HX711 DOUT | 16 |
| HX711 SCK | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
| Component | ESP32 Pin | ESP32-S3 Pin |
|-------------------|-----------|--------------|
| HX711 DOUT | 16 | 5 |
| HX711 SCK | 17 | 6 |
| OLED SDA | 21 | 8 |
| OLED SCL | 22 | 9 |
| PN532 IRQ | 32 | 15 |
| PN532 RESET | 33 | 16 |
| PN532 SDA | 21 | 8 |
| PN532 SCL | 22 | 9 |
| TTP223 I/O | 25 | 7 |
The I2C pins are the Arduino defaults for each chip and are not set explicitly in the code.
**!! ESP32-S3: do not use GPIO19/GPIO20 for the HX711.** These are the native USB data lines (D-/D+) and are wired to the "USB" connector on the DevKitC-1, which makes the HX711 detection unreliable.
**!! Make sure that the DIP switches on the PN532 are set to I2C**
**Use the 3V pin from the ESP for the touch sensor**
Binary file not shown.
Binary file not shown.
Binary file not shown.
+4
View File
@@ -0,0 +1,4 @@
- The **low version** has the same dimensions as the casing of [FilaMan Revamped](https://makerworld.com/de/models/1258715-filaman-revamped-nfc-based-spoolman-scale?designId=1258715-filaman-revamped-nfc-based-spoolman-scale#profileId-1367621).
But because of the missing scale the distance between the PN532 and a NFC tag placed on the marked area might be too narrow, what leads to weak/failed connection.
- The **high version** takes account of this but makes the casing 10mm higher
+74 -3
View File
@@ -87,6 +87,24 @@
</div>
<div id="sleepStatusMessage" style="margin-top: 0.5rem;"></div>
</div>
<div class="fm-card">
<h2>WiFi Settings</h2>
<div class="fm-form-group" style="margin-top: 1rem;">
<label class="fm-label" for="txPowerSelect">WiFi Transmit Power</label>
<select id="txPowerSelect" class="fm-input">
<option value="195">19.5 dBm (default, maximum range)</option>
<option value="170">17 dBm</option>
<option value="150">15 dBm</option>
<option value="130">13 dBm</option>
<option value="110">11 dBm</option>
<option value="85">8.5 dBm (lowest)</option>
</select>
<p style="font-size: 0.8rem; margin-top: 0.5rem;">Only lower this if your router keeps dropping the device, or if it sits right next to the access point. Applies immediately, no restart needed.</p>
</div>
<div id="txPowerStatusMessage" style="margin-top: 0.5rem;"></div>
</div>
</main>
</div>
@@ -160,6 +178,45 @@
});
});
// WiFi transmit power setting
fetch('/api/wifi-power')
.then(response => response.json())
.then(data => {
const sel = document.getElementById('txPowerSelect');
const val = String(data.txPower);
let matched = false;
for (let i = 0; i < sel.options.length; i++) {
if (sel.options[i].value === val) { sel.value = val; matched = true; break; }
}
if (!matched) sel.value = '195';
})
.catch(error => console.error('Error fetching wifi power:', error));
document.getElementById('txPowerSelect').addEventListener('change', function() {
const msg = document.getElementById('txPowerStatusMessage');
fetch('/api/wifi-power', {
method: 'POST',
headers: { 'Content-Type': 'application/json' },
body: JSON.stringify({ txPower: parseInt(this.value) })
})
.then(response => response.json())
.then(data => {
if (data.success) {
msg.textContent = 'Saved.';
msg.style.color = 'var(--success-text)';
setTimeout(() => { msg.textContent = ''; }, 2000);
} else {
msg.textContent = 'Error saving setting.';
msg.style.color = 'var(--error-text)';
}
})
.catch(error => {
msg.textContent = 'Error saving setting.';
msg.style.color = 'var(--error-text)';
console.error('Error saving wifi power:', error);
});
});
document.getElementById('registerBtn').addEventListener('click', () => {
const url = document.getElementById('filamanUrl').value;
const code = document.getElementById('deviceCode').value;
@@ -182,9 +239,10 @@
.then(response => response.json())
.then(data => {
if (data.success) {
statusMessage.textContent = 'Registration successful!';
statusMessage.style.color = 'var(--success-text)';
setTimeout(() => location.reload(), 2000);
// 202 Accepted: Registrierung wurde nur eingereiht. Das
// tatsaechliche Ergebnis kommt per WebSocket ('registerResult').
statusMessage.textContent = 'Registering device...';
statusMessage.style.color = 'var(--text-muted)';
} else {
statusMessage.textContent = 'Registration failed. Please check your code and URL.';
statusMessage.style.color = 'var(--error-text)';
@@ -208,6 +266,19 @@
dot.className = data.filaman_connected ? 'status-dot online' : 'status-dot offline';
document.getElementById('ramStatus').textContent = data.freeHeap + ' KB free';
}
else if (data.type === 'registerResult') {
// Die Registrierung laeuft asynchron im API-Task; /api/register
// antwortet sofort mit 202, das Ergebnis kommt hier an.
const statusMessage = document.getElementById('statusMessage');
if (data.success) {
statusMessage.textContent = 'Registration successful!';
statusMessage.style.color = 'var(--success-text)';
setTimeout(() => location.reload(), 2000);
} else {
statusMessage.textContent = 'Registration failed. Please check your code and URL.';
statusMessage.style.color = 'var(--error-text)';
}
}
};
ws.onclose = () => setTimeout(connectWebSocket, 2000);
}
+3
View File
@@ -68,3 +68,6 @@ Der Pull-up-Widerstand ist nicht zwingend erforderlich, erhöht aber die Zuverl
Folge den Anweisungen in der [Hauptdokumentation](../README.de.md#schritt-für-schritt-installation).
Du benötigst Version 3.3.1 oder neuer für eine funktionierende Hardware-Erkennung und den NFC-only Modus.
## Druck-Dateien
[STLs](../_3D%20Print%20Files/FilaMan_Lite/)
+3
View File
@@ -74,3 +74,6 @@ detect a missing hx711. But it should also work w/o the pull-up resistor.
Follow the instructions in the [main readme](../README.md#step-by-step-installation).
You need version 3.3.1 or later for a working hardware recognition and NFC-only mode.
## Print Files
[STLs](../_3D%20Print%20Files/FilaMan_Lite/)
Binary file not shown.
+53 -65
View File
@@ -9,81 +9,69 @@
; https://docs.platformio.org/page/projectconf.html
[common]
version = "3.3.2"
to_old_version = "3.2.0"
version = "3.4.10"
to_old_version = "3.4.0"
##
[env:esp32dev]
platform = espressif32@^6.0.0
board = esp32dev
framework = arduino
monitor_speed = 115200
#monitor_port = /dev/cu.usbmodem01
lib_deps =
tzapu/WiFiManager @ ^2.0.17
https://github.com/me-no-dev/ESPAsyncWebServer.git#master
https://github.com/esphome/AsyncTCP.git
bogde/HX711 @ ^0.7.5
adafruit/Adafruit SSD1306 @ ^2.5.13
adafruit/Adafruit GFX Library @ ^1.11.11
adafruit/Adafruit PN532 @ ^1.3.3
bblanchon/ArduinoJson @ ^7.3.0
knolleary/PubSubClient @ ^2.8
digitaldragon/SSLClient @ ^1.3.2
; Enable SPIFFS upload
board_build.filesystem = littlefs
; Update partition settings
board_build.partitions = partitions.csv
board_upload.flash_size = 4MB
board_build.flash_mode = dio
board_upload.flash_freq = "40m"
build_flags =
-Os
-ffunction-sections
-fdata-sections
#-DNDEBUG
-mtext-section-literals
-DVERSION=\"${common.version}\"
-DTOOLDVERSION=\"${common.to_old_version}\"
#-DENABLE_HEAP_DEBUGGING
-DASYNCWEBSERVER_REGEX
#-DCORE_DEBUG_LEVEL=3
-DCONFIG_ARDUHAL_LOG_COLORS=1
#-DOTA_DEBUG=1
-DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-DBOOT_APP_PARTITION_OTA_0=1
# ===== AsyncTCP Optimierungen - KRITISCH für WiFi-Stabilität =====
# Core 1 = Arduino/App Core (nicht Core 0 = WiFi/Protocol Core!)
# Schwere Callbacks auf Core 0 stören das WiFi-Radio
-DCONFIG_ASYNC_TCP_RUNNING_CORE=1
# Längerer ACK-Timeout für instabile Verbindungen (10s statt 5s)
-DCONFIG_ASYNC_TCP_MAX_ACK_TIME=10000
# Größere Queue für mehr gleichzeitige Requests
-DCONFIG_ASYNC_TCP_QUEUE_SIZE=128
# Mehr Stack für komplexere Callbacks (8KB statt 16KB default, spart RAM)
-DCONFIG_ASYNC_TCP_STACK_SIZE=8192
# Standard-Priorität beibehalten
-DCONFIG_ASYNC_TCP_PRIORITY=10
# WDT für AsyncTCP deaktiviert: Mit aktivem WDT konnten langsame
# WebSocket-Sender (z. B. große ws.textAll-JSONs) den AsyncTCP-Task
# killen und so alle Clients abwerfen.
-DCONFIG_ASYNC_TCP_USE_WDT=0
# ===== LwIP Optimierungen für OTA-Uploads (1.5-2MB) =====
# Schnellere Socket-Freigabe (30s statt 60s TIME_WAIT)
-DCONFIG_LWIP_TCP_MSL=30000
# Größerer RX-Buffer für große Uploads (8KB statt 4KB)
-DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=8192
# Max aktive TCP-Verbindungen (unverändert)
-DCONFIG_LWIP_MAX_ACTIVE_TCP=16
extra_scripts =
scripts/extra_script.py
extra_scripts = scripts/extra_script.py
[platformio]
default_envs = esp32dev
default_envs =
esp32dev
esp32-s3-devkitc-1
[env]
build_flags =
-Os
-ffunction-sections
-fdata-sections
-mtext-section-literals
-DVERSION=\"${common.version}\"
-DTOOLDVERSION=\"${common.to_old_version}\"
-DASYNCWEBSERVER_REGEX
-DCONFIG_ARDUHAL_LOG_COLORS=1
-DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-DBOOT_APP_PARTITION_OTA_0=1
-DCONFIG_ASYNC_TCP_RUNNING_CORE=1
-DCONFIG_ASYNC_TCP_MAX_ACK_TIME=10000
-DCONFIG_ASYNC_TCP_QUEUE_SIZE=128
-DCONFIG_ASYNC_TCP_STACK_SIZE=8192
-DCONFIG_ASYNC_TCP_PRIORITY=10
# WDT für AsyncTCP deaktiviert: Mit aktivem WDT konnten langsame
# WebSocket-Sender (z. B. große ws.textAll-JSONs) den AsyncTCP-Task
# killen und so alle Clients abwerfen.
-DCONFIG_ASYNC_TCP_USE_WDT=0
-DCONFIG_LWIP_TCP_MSL=30000
-DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=8192
-DCONFIG_LWIP_MAX_ACTIVE_TCP=16
lib_deps =
tzapu/WiFiManager
https://github.com/me-no-dev/ESPAsyncWebServer.git#master
https://github.com/esphome/AsyncTCP.git
bogde/HX711 @ ^0.7.5
adafruit/Adafruit SSD1306 @ ^2.5.13
adafruit/Adafruit GFX Library @ ^1.11.11
adafruit/Adafruit PN532 @ ^1.3.3
bblanchon/ArduinoJson @ ^7.3.0
knolleary/PubSubClient @ ^2.8
digitaldragon/SSLClient @ ^1.3.2
monitor_speed = 115200
[env:esp32-s3-devkitc-1]
board = esp32-s3-devkitc-1
framework = arduino
extra_scripts = scripts/extra_script.py
upload_protocol = esptool
board_build.flash_mode = dio
platform = espressif32
board_build.filesystem = littlefs
board_build.partitions = partitions.csv
board_upload.flash_size = 8MB
+71 -1
View File
@@ -208,6 +208,25 @@ bool sendRfidResult(String tagUuid, int spoolId, int locationId, bool success, S
return (httpCode == 200);
}
bool sendTagData(String tagJson) {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(10000);
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/tag-data");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
doc["tag_json"] = tagJson;
String payload;
serializeJson(doc, payload);
int httpCode = http.POST(payload);
http.end();
Serial.printf("sendTagData: HTTP %d\n", httpCode);
return (httpCode == 200);
}
void filamanApiTask(void* pvParameters) {
for (;;) {
ApiRequest req;
@@ -228,10 +247,21 @@ void filamanApiTask(void* pvParameters) {
if (hasReq) {
filamanApiState = API_TRANSMITTING;
switch (req.type) {
case API_REQUEST_HEARTBEAT: sendHeartbeatWithRetry(2); break; // Mit Retry-Logik
case API_REQUEST_REGISTER: {
// URL übernehmen und persistieren, dann blockierend
// registrieren - hier unkritisch, da eigener Task.
if (req.str2.length() > 0) filamanUrl = req.str2;
saveFilamanConfig();
bool ok = registerDevice(req.str1);
Serial.printf("registerDevice: %s\n", ok ? "success" : "failed");
sendRegisterResult(ok);
break;
}
case API_REQUEST_HEARTBEAT: sendHeartbeatWithRetry(2); break;
case API_REQUEST_WEIGHT: sendWeight(req.id1, req.str1, req.val); break;
case API_REQUEST_LOCATE: sendLocation(req.id1, req.str1, req.id2, req.str2); break;
case API_REQUEST_RFID_RESULT: sendRfidResult(req.str1, req.id1, req.id2, req.bool1, req.str3, req.remainingWeight); break;
case API_REQUEST_TAG_DATA: sendTagData(req.str1); break;
default: break;
}
filamanApiState = API_IDLE;
@@ -240,6 +270,29 @@ void filamanApiTask(void* pvParameters) {
}
}
// Reiht die Registrierung ein, statt sie im AsyncTCP-Kontext auszuführen.
// str2 = FilaMan-URL, str1 = Device-Code.
bool registerDeviceAsync(const String& url, const String& deviceCode) {
bool queued = false;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
for(int i=0; i<MAX_API_QUEUE; i++) if(!apiQueue[i].active) {
apiQueue[i].type = API_REQUEST_REGISTER;
apiQueue[i].id1 = 0;
apiQueue[i].id2 = 0;
apiQueue[i].str1 = deviceCode;
apiQueue[i].str2 = url;
apiQueue[i].val = 0.0f;
apiQueue[i].active = true;
queued = true;
break;
}
xSemaphoreGive(queueMutex);
}
// Ohne Queue-Platz kaeme nie ein "registerResult" - der Aufrufer muss
// dem Frontend dann sofort einen Fehler zurueckgeben.
return queued;
}
void sendHeartbeatAsync() {
if (!checkFilamanRegistration()) return;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
@@ -323,6 +376,23 @@ void sendRfidResultAsync(String tagUuid, int spoolId, int locationId, bool succe
}
}
void sendTagDataAsync(String tagJson) {
if (!checkFilamanRegistration()) return;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
for(int i=0; i<MAX_API_QUEUE; i++) if(!apiQueue[i].active) {
apiQueue[i].type = API_REQUEST_TAG_DATA;
apiQueue[i].str1 = tagJson;
apiQueue[i].id1 = 0;
apiQueue[i].id2 = 0;
apiQueue[i].str2 = "";
apiQueue[i].val = 0.0f;
apiQueue[i].active = true;
break;
}
xSemaphoreGive(queueMutex);
}
}
bool initFilaman() {
oledShowProgressBar(3, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_API_INIT));
loadFilamanConfig();
+4 -1
View File
@@ -17,7 +17,8 @@ typedef enum {
API_REQUEST_HEARTBEAT,
API_REQUEST_WEIGHT,
API_REQUEST_LOCATE,
API_REQUEST_RFID_RESULT
API_REQUEST_RFID_RESULT,
API_REQUEST_TAG_DATA
} FilamanApiRequestType;
extern volatile filamanApiStateType filamanApiState;
@@ -26,10 +27,12 @@ extern bool filamanConnected;
// FilaMan API functions
bool initFilaman();
bool registerDevice(const String& deviceCode);
bool registerDeviceAsync(const String& url, const String& deviceCode);
void sendHeartbeatAsync();
void sendWeightAsync(int spoolId, String tagUuid, float weight);
void sendLocationAsync(int spoolId, String spoolTagUuid, int locationId, String locationTagUuid);
void sendRfidResultAsync(String tagUuid, int spoolId, int locationId, bool success, String errorMessage, float remainingWeight = 0);
void sendTagDataAsync(String tagJson);
// Internal blocking functions (used by async task)
bool sendHeartbeat();
+25 -2
View File
@@ -6,21 +6,38 @@
//#define PN532_MOSI 23
//#define PN532_SS 5
//#define PN532_MISO 19
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t PN532_IRQ = 15;
const uint8_t PN532_RESET = 16;
#else
const uint8_t PN532_IRQ = 32;
const uint8_t PN532_RESET = 33;
#endif
// ***** PN532
// ***** HX711 (Waage)
// HX711 circuit wiring
const uint8_t LOADCELL_DOUT_PIN = 16; //16;
const uint8_t LOADCELL_SCK_PIN = 17; //17;
// ACHTUNG ESP32-S3: GPIO19/20 sind die nativen USB-Leitungen (D-/D+) und liegen auf
// dem DevKitC-1 an der "USB"-Buchse. Der HX711 wird dort unzuverlaessig erkannt.
// Pins hier nur zusammen mit den Tabellen in README.md / README.de.md aendern.
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t LOADCELL_DOUT_PIN = 5;
const uint8_t LOADCELL_SCK_PIN = 6;
#else
const uint8_t LOADCELL_DOUT_PIN = 16;
const uint8_t LOADCELL_SCK_PIN = 17;
#endif
const uint8_t calVal_eepromAdress = 0;
const uint16_t SCALE_LEVEL_WEIGHT = 500;
// ***** HX711
// ***** TTP223 (Touch Sensor)
// TTP223 circuit wiring
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t TTP223_PIN = 7;
#else
const uint8_t TTP223_PIN = 25;
#endif
// ***** TTP223
@@ -46,6 +63,12 @@ bool filamanRegistered = false;
uint16_t oledSleepTimeout = 60; // Default 60 seconds (0 = disabled)
// ***** Display Sleep
// ***** WiFi
// Sendeleistung in 0.1 dBm. Default 19.5dBm = Maximum; nur senken, wenn der AP
// das Geraet rauswirft (reason=2/4) oder es direkt neben dem AP steht.
int16_t wifiTxPowerDeciDbm = 195;
// ***** WiFi
// ***** Task Prios
uint8_t rfidTaskCore = 1;
uint8_t rfidTaskPrio = 1;
+4
View File
@@ -15,6 +15,7 @@
#define NVS_NAMESPACE_SETTINGS "settings"
#define NVS_KEY_LANGUAGE "language"
#define NVS_KEY_OLED_SLEEP "oled_sleep"
#define NVS_KEY_WIFI_TXPOWER "wifi_txpwr"
#define SCALE_DEFAULT_CALIBRATION_VALUE 430.0f;
#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)
@@ -74,4 +75,7 @@ extern uint8_t scaleTaskPrio;
extern uint16_t defaultScaleCalibrationValue;
extern uint16_t oledSleepTimeout;
// WLAN-Sendeleistung in 0.1 dBm (195 = 19.5dBm). Siehe txPowerFromDeciDbm() in wlan.cpp.
extern int16_t wifiTxPowerDeciDbm;
#endif
+46 -38
View File
@@ -199,9 +199,17 @@ void loop() {
mainTaskWasPaused = true;
}
// Während eines expliziten Scan-Requests darf kein regulärer Wiegevorgang
// an das Backend gesendet werden.
if (scanRequestActive) {
weightCounterToApi = 0;
weightSend = 0;
lastWeight = weight;
}
// Wenn Timer abgelaufen und nicht gerade ein RFID-Tag geschrieben wird
if (currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState < NFC_WRITING)
if (!scanRequestActive && currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState < NFC_WRITING)
{
lastWeightReadTime = currentMillis;
@@ -226,51 +234,51 @@ void loop() {
weightSend = 0;
}
lastWeight = weight;
lastWeight = weight;
// Wenn ein Tag erkannt wurde und das Gewicht stabil ist (4+ seconds), an FilaMan senden
if (weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Wenn ein Tag erkannt wurde und das Gewicht stabil ist (4+ seconds), an FilaMan senden
if (!scanRequestActive && weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Check if it's a Bambu tag - if so, send only UUID without spoolId
if (isBambuTag) {
sendWeightAsync(0, activeTagUuid, weight);
Serial.println("Bambu weight queued for FilaMan (UUID only)");
} else {
// Normal NTAG: send spoolId + UUID
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
Serial.println("Weight queued for FilaMan");
}
weightSend = 1;
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_SPOOL_TAG), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
}
// Handle successful tag write
if (nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Only send weight if a valid spoolId exists (spool tag, not location tag)
if (activeSpoolId.length() > 0 && activeSpoolId != "0") {
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
// Check if it's a Bambu tag - if so, send only UUID without spoolId
if (isBambuTag) {
sendWeightAsync(0, activeTagUuid, weight);
Serial.println("Bambu weight queued for FilaMan (UUID only)");
} else {
// Normal NTAG: send spoolId + UUID
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
Serial.println("Weight queued for FilaMan");
}
weightSend = 1;
Serial.println("Weight queued for FilaMan after spool tag write");
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_TAG_WRITTEN), tr(STR_SENDING));
oledShowProgressBar(3, 4, tr(STR_SPOOL_TAG), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
} else {
// Location tag written - no weight to send
Serial.println("Location tag written successfully - no weight send needed");
}
// Handle successful tag write
if (!scanRequestActive && nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Only send weight if a valid spoolId exists (spool tag, not location tag)
if (activeSpoolId.length() > 0 && activeSpoolId != "0") {
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
weightSend = 1;
Serial.println("Weight queued for FilaMan after spool tag write");
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_TAG_WRITTEN), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
} else {
// Location tag written - no weight to send
Serial.println("Location tag written successfully - no weight send needed");
}
}
}
}
}
esp_task_wdt_reset();
}
+171 -51
View File
@@ -13,6 +13,17 @@
//Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, PN532_SS);
Adafruit_PN532 nfc(PN532_IRQ, PN532_RESET);
// Adafruit_PN532::begin() toggles RSTPDN too briefly (~1ms/2ms) for some PN532
// modules to reliably leave powerdown, which then makes getFirmwareVersion()
// return 0 right after begin(). Pulse it explicitly with more margin first.
static void pulsePn532Reset() {
pinMode(PN532_RESET, OUTPUT);
digitalWrite(PN532_RESET, LOW);
delay(50);
digitalWrite(PN532_RESET, HIGH);
delay(200);
}
TaskHandle_t RfidReaderTask;
// AsyncWebServerRequest* volatile activeNfcWriteRequest = nullptr; // Removed
SemaphoreHandle_t nfcRequestMutex = NULL;
@@ -27,6 +38,35 @@ bool isBambuTag = false;
volatile bool nfcReadingTaskSuspendRequest = false;
volatile bool nfcReadingTaskSuspendState = false;
volatile bool nfcWriteInProgress = false; // Prevent any tag operations during write
volatile bool scanRequestActive = false; // Set by website when frontend requests a tag scan
unsigned long scanRequestStartedAtMs = 0;
const unsigned long SCAN_REQUEST_TIMEOUT_MS = 30000;
void sendScanRequestErrorToBackend(const char* errorMessage) {
if (!scanRequestActive) {
return;
}
JsonDocument doc;
doc["scan_status"] = "error";
doc["error_message"] = errorMessage;
doc["source"] = "rfid_scan_request";
String payload;
serializeJson(doc, payload);
sendTagDataAsync(payload);
scanRequestActive = false;
scanRequestStartedAtMs = 0;
}
void setScanRequest(bool active) {
scanRequestActive = active;
if (active) {
scanRequestStartedAtMs = millis();
} else {
scanRequestStartedAtMs = 0;
}
}
volatile nfcReaderStateType nfcReaderState = NFC_IDLE;
// 0 = nicht gelesen
@@ -532,6 +572,7 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
Serial.println("1. Neuinitialisierung des PN532...");
// Reinitialize the PN532
pulsePn532Reset();
nfc.begin();
vTaskDelay(pdMS_TO_TICKS(500)); // Give it time to initialize
@@ -1315,12 +1356,19 @@ bool decodeNdefAndReturnJson(const byte* encodedMessage, String uidString) {
{
if(filamanConnected){
Serial.println("JSON-Dokument erfolgreich verarbeitet");
if (doc["sm_id"].is<String>() && doc["sm_id"] != "" && doc["sm_id"] != "0")
String idKey = doc["spool_id"].is<String>() ? "spool_id" : "sm_id";
if (doc[idKey].is<String>() && doc[idKey] != "" && doc[idKey] != "0")
{
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), tr(STR_WEIGHING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
activeSpoolId = doc["sm_id"].as<String>();
lastSpoolId = activeSpoolId;
if (scanRequestActive) {
scanRequestActive = false;
sendTagDataAsync(nfcJsonData);
tagProcessed = true;
} else {
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), tr(STR_WEIGHING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
activeSpoolId = doc[idKey].as<String>();
lastSpoolId = activeSpoolId;
}
}
else if(doc["location_id"].is<int>())
@@ -1350,6 +1398,27 @@ bool decodeNdefAndReturnJson(const byte* encodedMessage, String uidString) {
tagProcessed = true;
activeSpoolId = "";
}
else if (doc["protocol"].is<String>() &&
(doc["protocol"].as<String>() == "openspool" ||
doc["protocol"].as<String>() == "filaman"))
{
// Tag mit erweitertem Protokoll (OpenSpool/FilaMan) aber ohne spool_id/sm_id.
// FilaMan sucht die Spule anhand der tag_uuid (rfid_uid).
String protocolStr = doc["protocol"].as<String>();
String type = doc["type"] | "?";
String brand = doc["brand"] | "";
String displayText = brand.length() > 0 ? (brand + " " + type) : type;
Serial.println("Extended-data tag: protocol=" + protocolStr + " type=" + type + " brand=" + brand);
activeSpoolId = ""; // Keine spool_id/sm_id → Gewicht wird mit tag_uuid gesendet
if (scanRequestActive) {
scanRequestActive = false;
sendTagDataAsync(nfcJsonData);
tagProcessed = true;
} else {
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), displayText.c_str());
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
}
}
else
{
Serial.println("Unbekannter Tag-Inhalt.");
@@ -1433,7 +1502,7 @@ bool quickSpoolIdCheck(String uidString) {
return false;
}
Serial.println("=== FAST-PATH: Quick sm_id Check ===");
Serial.println("=== FAST-PATH: Quick spool_id Check ===");
// Read enough pages to cover NDEF header + beginning of payload (pages 4-8 = 20 bytes)
uint8_t ndefData[20];
@@ -1542,17 +1611,23 @@ bool quickSpoolIdCheck(String uidString) {
Serial.print("JSON start from extended read: ");
Serial.println(jsonStart);
// Check for sm_id pattern - look for non-zero sm_id values
if (jsonStart.indexOf("\"sm_id\":\"") >= 0) {
int smIdStart = jsonStart.indexOf("\"sm_id\":\"") + 9;
// Check for spool_id/sm_id pattern - look for non-zero id values
String idPattern = "\"spool_id\":\"";
int idPatternPos = jsonStart.indexOf(idPattern);
if (idPatternPos < 0) {
idPattern = "\"sm_id\":\"";
idPatternPos = jsonStart.indexOf(idPattern);
}
if (idPatternPos >= 0) {
int smIdStart = idPatternPos + idPattern.length();
int smIdEnd = jsonStart.indexOf("\"", smIdStart);
if (smIdEnd > smIdStart && smIdEnd < jsonStart.length()) {
String quickSpoolId = jsonStart.substring(smIdStart, smIdEnd);
Serial.print("Found sm_id in extended read: ");
Serial.print("Found spool_id/sm_id in extended read: ");
Serial.println(quickSpoolId);
// Only process if sm_id is not "0" (known spool)
// Only process if id is not "0" (known spool)
if (quickSpoolId != "0" && quickSpoolId.length() > 0) {
Serial.println("✓ FAST-PATH: Known spool detected!");
@@ -1573,13 +1648,13 @@ bool quickSpoolIdCheck(String uidString) {
Serial.println("✓ FAST-PATH SUCCESS: Known spool processed quickly");
return true;
} else {
Serial.println("✗ FAST-PATH: sm_id is 0 - new brand filament, need full read");
Serial.println("✗ FAST-PATH: spool_id/sm_id is 0 - new brand filament, need full read");
return false;
}
}
}
Serial.println("✗ FAST-PATH: No sm_id pattern in extended read");
Serial.println("✗ FAST-PATH: No spool_id/sm_id pattern in extended read");
return false;
}
@@ -1595,20 +1670,26 @@ bool quickSpoolIdCheck(String uidString) {
Serial.print("Quick JSON data: ");
Serial.println(quickJson);
// Look for sm_id pattern in the beginning of JSON - check for known vs new spools
if (quickJson.indexOf("\"sm_id\":\"") >= 0) {
Serial.println("✓ FAST-PATH: sm_id field found");
// Look for spool_id/sm_id pattern in the beginning of JSON - check for known vs new spools
String idPattern2 = "\"spool_id\":\"";
int idPattern2Pos = quickJson.indexOf(idPattern2);
if (idPattern2Pos < 0) {
idPattern2 = "\"sm_id\":\"";
idPattern2Pos = quickJson.indexOf(idPattern2);
}
if (idPattern2Pos >= 0) {
Serial.println("✓ FAST-PATH: spool_id/sm_id field found");
// Extract sm_id from quick data
int smIdStart = quickJson.indexOf("\"sm_id\":\"") + 9;
// Extract id from quick data
int smIdStart = idPattern2Pos + idPattern2.length();
int smIdEnd = quickJson.indexOf("\"", smIdStart);
if (smIdEnd > smIdStart && smIdEnd < quickJson.length()) {
String quickSpoolId = quickJson.substring(smIdStart, smIdEnd);
Serial.print("✓ Quick extracted sm_id: ");
Serial.print("✓ Quick extracted spool_id/sm_id: ");
Serial.println(quickSpoolId);
// Only process known spools (sm_id != "0") via fast path
// Only process known spools (id != "0") via fast path
if (quickSpoolId != "0" && quickSpoolId.length() > 0) {
Serial.println("✓ FAST-PATH: Known spool detected!");
@@ -1629,12 +1710,12 @@ bool quickSpoolIdCheck(String uidString) {
Serial.println("✓ FAST-PATH SUCCESS: Known spool processed quickly");
return true;
} else {
Serial.println("✗ FAST-PATH: sm_id is 0 - new brand filament, need full read");
return false; // sm_id="0" means new brand filament, needs full processing
Serial.println("✗ FAST-PATH: spool_id/sm_id is 0 - new brand filament, need full read");
return false; // id="0" means new brand filament, needs full processing
}
} else {
Serial.println("✗ FAST-PATH: Could not extract complete sm_id value");
return false; // Need full read to get complete sm_id
Serial.println("✗ FAST-PATH: Could not extract complete spool_id/sm_id value");
return false; // Need full read to get complete id
}
}
@@ -1885,7 +1966,7 @@ void writeJsonToTag(void *parameter) {
vTaskDelete(NULL);
}
// Ensures sm_id is always the first key in JSON for fast-path detection
// Ensures spool_id is always the first key in JSON for fast-path detection
String optimizeJsonForFastPath(const char* payload) {
JsonDocument inputDoc;
DeserializationError error = deserializeJson(inputDoc, payload);
@@ -1896,26 +1977,26 @@ String optimizeJsonForFastPath(const char* payload) {
return String(payload); // Return original if parsing fails
}
// Create optimized JSON with sm_id first
// Create optimized JSON with spool_id first
JsonDocument optimizedDoc;
// Always add sm_id first (even if it's "0" for brand filaments)
// Also convert spool_id to sm_id if present (backend may send either)
if (inputDoc["sm_id"].is<String>() && inputDoc["sm_id"].as<String>() != "0" && inputDoc["sm_id"].as<String>() != "") {
optimizedDoc["sm_id"] = inputDoc["sm_id"].as<String>();
Serial.print("Optimizing JSON: sm_id found = ");
Serial.println(inputDoc["sm_id"].as<String>());
} else if (inputDoc["spool_id"].is<int>() && inputDoc["spool_id"].as<int>() > 0) {
optimizedDoc["sm_id"] = String(inputDoc["spool_id"].as<int>());
Serial.print("Optimizing JSON: Converted spool_id to sm_id = ");
// Always add spool_id first (even if it's "0" for brand filaments)
// Accept legacy sm_id as input too, but always emit spool_id
if (inputDoc["spool_id"].is<int>() && inputDoc["spool_id"].as<int>() > 0) {
optimizedDoc["spool_id"] = String(inputDoc["spool_id"].as<int>());
Serial.print("Optimizing JSON: spool_id found = ");
Serial.println(inputDoc["spool_id"].as<int>());
} else if (inputDoc["spool_id"].is<String>() && inputDoc["spool_id"].as<String>() != "0" && inputDoc["spool_id"].as<String>() != "") {
optimizedDoc["sm_id"] = inputDoc["spool_id"].as<String>();
Serial.print("Optimizing JSON: Converted spool_id (string) to sm_id = ");
optimizedDoc["spool_id"] = inputDoc["spool_id"].as<String>();
Serial.print("Optimizing JSON: spool_id found = ");
Serial.println(inputDoc["spool_id"].as<String>());
} else if (inputDoc["sm_id"].is<String>() && inputDoc["sm_id"].as<String>() != "0" && inputDoc["sm_id"].as<String>() != "") {
optimizedDoc["spool_id"] = inputDoc["sm_id"].as<String>();
Serial.print("Optimizing JSON: Converted legacy sm_id to spool_id = ");
Serial.println(inputDoc["sm_id"].as<String>());
} else {
optimizedDoc["sm_id"] = "0"; // Default for brand filaments
Serial.println("Optimizing JSON: No sm_id or spool_id found, setting sm_id to '0'");
optimizedDoc["spool_id"] = "0"; // Default for brand filaments
Serial.println("Optimizing JSON: No spool_id or sm_id found, setting spool_id to '0'");
}
for (JsonPair kv : inputDoc.as<JsonObject>()) {
@@ -1949,7 +2030,7 @@ void startWriteJsonToTag(const bool isSpoolTag, const char* payload, int spoolId
return;
}
// Optimize JSON to ensure sm_id is first key for fast-path detection
// Optimize JSON to ensure spool_id is first key for fast-path detection
String optimizedPayload = optimizeJsonForFastPath(payload);
NfcWriteParameterType* parameters = new NfcWriteParameterType();
@@ -2029,6 +2110,11 @@ void scanRfidTask(void * parameter) {
esp_task_wdt_reset();
yield();
if (scanRequestActive && scanRequestStartedAtMs > 0 && (millis() - scanRequestStartedAtMs) > SCAN_REQUEST_TIMEOUT_MS) {
Serial.println("RFID scan-request timeout reached without tag");
sendScanRequestErrorToBackend("Timeout - no tag found");
}
// Skip scanning during write operations, but keep NFC interface active
if (nfcReaderState != NFC_WRITING && !nfcWriteInProgress && !nfcReadingTaskSuspendRequest && !booting)
{
@@ -2081,7 +2167,8 @@ void scanRfidTask(void * parameter) {
{
activeTagUuid = uidString;
// Try fast-path detection first for known spools
if (quickSpoolIdCheck(uidString)) {
// Skip fast-path when a scan request is active — full NDEF read needed to send tag data
if (!scanRequestActive && quickSpoolIdCheck(uidString)) {
Serial.println("✓ FAST-PATH: Tag processed quickly, skipping full read");
// Set reader back to idle for next scan
nfcReaderState = NFC_READ_SUCCESS;
@@ -2157,16 +2244,48 @@ void scanRfidTask(void * parameter) {
}
else
{
// UID length != 7, might be a Mifare Classic (Bambu tags)
Serial.println("Not a standard NTAG (UID length != 7), trying Bambu Lab tag...");
if (!detectBambuTag(uid, uidLength)) {
//TBD: Show error here?!
oledShowProgressBar(1, 1, tr(STR_FAILURE), tr(STR_UNKNOWN_TAG_TYPE));
oledSetPriority(DISPLAY_PRIORITY_WARNING, 2000);
Serial.println("This doesn't seem to be an NTAG2xx tag (UUID length != 7 bytes)!");
// Reset activeSpoolId when tag type is unknown to prevent autoSet
activeSpoolId = "";
Serial.println("Unknown tag type - activeSpoolId reset to prevent autoSet");
// UID length != 7 — could be Mifare Classic (BambuLab) or non-standard NTAG.
// Try NTAG-style NDEF read first to check for openspool/filaman protocol.
Serial.println("UID length != 7, checking for openspool/filaman protocol first...");
activeTagUuid = uidString;
bool handledAsNdef = false;
uint16_t tagSize = readTagSize();
if (tagSize > 0)
{
uint8_t* data = (uint8_t*)malloc(tagSize);
memset(data, 0, tagSize);
uint8_t numPages = tagSize / 4;
for (uint8_t i = 4; i < 4 + numPages; i++) {
if (!robustPageRead(i, data + (i - 4) * 4)) {
Serial.printf("Page %d read failed, stopping\n", i);
break;
}
if (data[(i - 4) * 4] == 0xFE) {
Serial.println("Found NDEF end marker");
break;
}
yield();
esp_task_wdt_reset();
vTaskDelay(pdMS_TO_TICKS(2));
}
if (decodeNdefAndReturnJson(data, uidString)) {
handledAsNdef = true;
nfcReaderState = NFC_READ_SUCCESS;
}
free(data);
}
if (!handledAsNdef)
{
Serial.println("No NDEF/openspool protocol found, trying Bambu Lab tag...");
if (!detectBambuTag(uid, uidLength)) {
oledShowProgressBar(1, 1, tr(STR_FAILURE), tr(STR_UNKNOWN_TAG_TYPE));
oledSetPriority(DISPLAY_PRIORITY_WARNING, 2000);
Serial.println("This doesn't seem to be an NTAG2xx tag (UUID length != 7 bytes)!");
activeSpoolId = "";
Serial.println("Unknown tag type - activeSpoolId reset to prevent autoSet");
}
}
}
}
@@ -2228,6 +2347,7 @@ void scanRfidTask(void * parameter) {
void startNfc() {
nfcRequestMutex = xSemaphoreCreateMutex();
oledShowProgressBar(4, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_NFC_INIT));
pulsePn532Reset();
nfc.begin(); // Beginne Kommunikation mit RFID Leser
delay(1000);
+2
View File
@@ -28,6 +28,7 @@ void scanRfidTask(void * parameter);
void startWriteJsonToTag(const bool isSpoolTag, const char* payload, int spoolId = 0, int locationId = 0);
bool quickSpoolIdCheck(String uidString);
bool readCompleteJsonForFastPath(); // Read complete JSON data for fast-path web interface display
void setScanRequest(bool active);
extern TaskHandle_t RfidReaderTask;
extern String nfcJsonData;
@@ -36,6 +37,7 @@ extern String activeTagUuid;
extern String lastSpoolId;
extern volatile nfcReaderStateType nfcReaderState;
extern volatile bool nfcWriteInProgress;
extern volatile bool scanRequestActive;
extern bool tagProcessed;
extern bool isBambuTag;
+1 -1
View File
@@ -261,7 +261,7 @@ bool deepSearchScale() {
// without pull-up resistor (10k) on LOADCELL_DOUT_PIN the hx711 lib functions
// are not reliable in detecting a missing chip
// these tests work even without pull-up resistor
const uint32_t timeout = 1000;
const uint32_t timeout = 1000; // 1 second timeout for waiting for the chip to respond
const int samples = 10;
pinMode(LOADCELL_DOUT_PIN, INPUT);
+50 -5
View File
@@ -12,6 +12,7 @@
#include "config.h"
#include "debug.h"
#include "lang.h"
#include "wlan.h"
#ifndef VERSION
#define VERSION "1.2.0"
@@ -105,6 +106,12 @@ void sendWriteResult(AsyncWebSocketClient *client, uint8_t success) {
if (client) client->text(response); else ws.textAll(response);
}
// Ergebnis der asynchronen Geräte-Registrierung. Der HTTP-Request ist zu diesem
// Zeitpunkt längst beantwortet (202), das Frontend wartet auf diese WS-Nachricht.
void sendRegisterResult(bool success) {
ws.textAll("{\"type\":\"registerResult\",\"success\":" + String(success ? "true" : "false") + "}");
}
void foundNfcTag(AsyncWebSocketClient *client, uint8_t success) {
if (success == lastSuccess && client == nullptr) return;
ws.textAll("{\"type\":\"nfcTag\", \"payload\":{\"found\": " + String(success) + "}}");
@@ -189,12 +196,16 @@ void setupWebserver(AsyncWebServer &server) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid JSON\"}");
return;
}
if (doc["url"].is<String>()) filamanUrl = doc["url"].as<String>();
saveFilamanConfig();
if (registerDevice(doc["code"].as<String>())) {
request->send(200, "application/json", "{\"success\": true}");
// WICHTIG: registerDevice() macht einen blockierenden HTTPClient-Call
// (5s Timeout). Direkt hier aufgerufen friert das den AsyncTCP-Task ein
// und reisst alle laufenden HTTP-/WebSocket-Verbindungen ab. Daher nur
// einreihen und sofort antworten; das Ergebnis kommt per WebSocket
// ("registerResult") vom filamanApiTask.
String url = doc["url"].is<String>() ? doc["url"].as<String>() : String("");
if (registerDeviceAsync(url, doc["code"].as<String>())) {
request->send(202, "application/json", "{\"success\": true, \"pending\": true}");
} else {
request->send(400, "application/json", "{\"success\": false}");
request->send(503, "application/json", "{\"success\": false, \"error\": \"API queue full\"}");
}
});
@@ -285,6 +296,40 @@ void setupWebserver(AsyncWebServer &server) {
request->send(200, "application/json", "{\"success\": true}");
});
// WiFi TX Power API (Wert in 0.1 dBm, z.B. 195 = 19.5dBm)
server.on("/api/wifi-power", HTTP_GET, [](AsyncWebServerRequest *request){
JsonDocument doc;
doc["txPower"] = wifiTxPowerDeciDbm;
String response;
serializeJson(doc, response);
request->send(200, "application/json", response);
});
server.on("/api/wifi-power", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
JsonDocument doc;
DeserializationError error = deserializeJson(doc, (const uint8_t*)data, len);
if (error) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid JSON\"}");
return;
}
if (!doc["txPower"].is<int>()) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Missing txPower\"}");
return;
}
int16_t txPower = (int16_t)doc["txPower"].as<int>();
if (!isValidTxPowerDeciDbm(txPower)) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid txPower\"}");
return;
}
saveWifiTxPower(txPower);
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/api/v1/rfid/scan-request", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
setScanRequest(true);
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/reboot", HTTP_GET, [](AsyncWebServerRequest *request){
request->send(200, "text/plain", "Rebooting...");
delay(500);
+1
View File
@@ -26,5 +26,6 @@ void sendAmsData(AsyncWebSocketClient *client);
void sendNfcData();
void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);
void sendWriteResult(AsyncWebSocketClient *client, uint8_t success);
void sendRegisterResult(bool success);
#endif
+73 -20
View File
@@ -7,11 +7,53 @@
#include "display.h"
#include "config.h"
#include "lang.h"
#include <Preferences.h>
WiFiManager wm;
bool wm_nonblocking = false;
uint8_t wifiErrorCounter = 0;
// Erlaubte Stufen in 0.1 dBm. Der ESP32-Treiber kennt nur diese festen Werte;
// alles andere fällt auf das Maximum (19.5dBm) zurück.
wifi_power_t txPowerFromDeciDbm(int16_t deciDbm) {
switch (deciDbm) {
case 85: return WIFI_POWER_8_5dBm;
case 110: return WIFI_POWER_11dBm;
case 130: return WIFI_POWER_13dBm;
case 150: return WIFI_POWER_15dBm;
case 170: return WIFI_POWER_17dBm;
case 195: return WIFI_POWER_19_5dBm;
default: return WIFI_POWER_19_5dBm;
}
}
bool isValidTxPowerDeciDbm(int16_t deciDbm) {
return deciDbm == 85 || deciDbm == 110 || deciDbm == 130 ||
deciDbm == 150 || deciDbm == 170 || deciDbm == 195;
}
void loadWifiTxPower() {
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, true);
int16_t stored = preferences.getShort(NVS_KEY_WIFI_TXPOWER, 195);
preferences.end();
wifiTxPowerDeciDbm = isValidTxPowerDeciDbm(stored) ? stored : 195;
Serial.print("WiFi TX power loaded: ");
Serial.print(wifiTxPowerDeciDbm / 10.0, 1);
Serial.println(" dBm");
}
void saveWifiTxPower(int16_t deciDbm) {
if (!isValidTxPowerDeciDbm(deciDbm)) return;
wifiTxPowerDeciDbm = deciDbm;
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, false);
preferences.putShort(NVS_KEY_WIFI_TXPOWER, deciDbm);
preferences.end();
// Sofort anwenden, ein Neustart ist nicht noetig.
WiFi.setTxPower(txPowerFromDeciDbm(deciDbm));
}
void wifiSettings() {
// Standard WiFi-Einstellungen für höchste Stabilität mit ESPAsyncWebServer
WiFi.mode(WIFI_STA);
@@ -29,8 +71,13 @@ void wifiSettings() {
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
// Angemessene Sendeleistung (reduziert Hitzeprobleme)
WiFi.setTxPower(WIFI_POWER_17dBm);
// Sendeleistung, einstellbar unter Setup (Default 19.5dBm = Maximum).
// 17dBm war früher ein Kompromiss gegen Hitzeprobleme, führte bei marginalem
// Empfang aber zu AP-seitigen Auth-/Assoc-Kicks (reason=2/4/9/202). Umgekehrt
// kann volle Leistung direkt neben dem AP dessen Empfaenger uebersteuern -
// dann hilft ein niedrigerer Wert (beim ESP32-S3 z.B. 8.5dBm).
loadWifiTxPower();
WiFi.setTxPower(txPowerFromDeciDbm(wifiTxPowerDeciDbm));
// Hinweis: Kein esp_wifi_set_rssi_threshold() mehr.
// Der vorherige Wert (-80 dBm) löste in Single-AP-Heimnetzen häufige
@@ -43,23 +90,36 @@ void wifiSettings() {
// die eigentliche Wiederherstellung; hier nur Logging + Display-Update.
void onWiFiEvent(WiFiEvent_t event, WiFiEventInfo_t info) {
switch (event) {
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
Serial.printf("WiFi event: STA_DISCONNECTED, reason=%u\n",
info.wifi_sta_disconnected.reason);
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED: {
// BSSID/RSSI mitloggen: wechselt die BSSID zwischen den Reconnects,
// pendelt das Gerät zwischen zwei APs (Mesh/Repeater) - dann kommen
// die Abbrüche vom Roaming, nicht vom Webserver.
const uint8_t *bssid = info.wifi_sta_disconnected.bssid;
Serial.printf("WiFi event: STA_DISCONNECTED, reason=%u, "
"bssid=%02X:%02X:%02X:%02X:%02X:%02X, rssi=%d\n",
info.wifi_sta_disconnected.reason,
bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5],
WiFi.RSSI());
if (wifiOn) {
wifiOn = false;
oledShowTopRow();
}
break;
}
case ARDUINO_EVENT_WIFI_STA_GOT_IP:
Serial.print("WiFi event: STA_GOT_IP ");
Serial.println(WiFi.localIP());
Serial.printf("WiFi event: STA_GOT_IP %s, bssid=%s, rssi=%d, ch=%d\n",
WiFi.localIP().toString().c_str(),
WiFi.BSSIDstr().c_str(),
WiFi.RSSI(),
WiFi.channel());
wifiOn = true;
wifiErrorCounter = 0;
// Power-Save nach Reconnect erneut deaktivieren (wird vom Stack
// gelegentlich zurückgesetzt).
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
// Gleiches gilt für die Sendeleistung: nach einem Reconnect erneut setzen.
WiFi.setTxPower(txPowerFromDeciDbm(wifiTxPowerDeciDbm));
oledShowTopRow();
break;
default:
@@ -90,7 +150,10 @@ void initWiFi() {
if(wm_nonblocking) wm.setConfigPortalBlocking(false);
//wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
wm.setWiFiAutoReconnect(true);
// WiFiManager-Reconnect deaktiviert: der ESP32-Stack übernimmt das via
// setAutoReconnect(true). Zwei parallele Reconnect-Mechanismen erzeugen
// sonst einen Verbindungssturm, der den Router zu AUTH_EXPIRE-Kicks verleitet.
wm.setWiFiAutoReconnect(false);
wm.setConnectTimeout(10);
oledShowProgressBar(1, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_WIFI_INIT));
@@ -117,19 +180,9 @@ void initWiFi() {
void checkWiFiConnection() {
if (WiFi.status() != WL_CONNECTED)
{
// wifiOn-Flag und Display werden bereits vom WiFi-Event gesetzt.
// Hier nur noch das Reconnect-Backup für Fälle, in denen das ESP32-
// Auto-Reconnect aus irgendeinem Grund nicht greift (z. B. nach
// bestimmten reason-codes wie AUTH_EXPIRE, NO_AP_FOUND).
// setAutoReconnect(true) übernimmt die Wiederverbindung automatisch.
// Hier nur Display-Update und Fehler zählen für den Neustart-Watchdog.
oledDisplayText(tr(STR_WIFI_RECONNECTING));
// Sauberer Reconnect-Zyklus: erst trennen (ohne SSID zu löschen,
// ohne WiFi-Off), kurz Pause, dann neu verbinden. Hilft bei Routern
// mit Band-Steering, die einen halbtoten Session-State behalten.
WiFi.disconnect(false, false);
vTaskDelay(pdMS_TO_TICKS(50));
WiFi.reconnect();
wifiErrorCounter++;
// Nach ca. 5 Minuten ohne Verbindung Neustart (bei WIFI_CHECK_INTERVAL
+5
View File
@@ -6,4 +6,9 @@
void initWiFi();
void checkWiFiConnection();
// Sendeleistung in 0.1 dBm (85/110/130/150/170/195). Ungueltige Werte werden ignoriert.
bool isValidTxPowerDeciDbm(int16_t deciDbm);
void loadWifiTxPower();
void saveWifiTxPower(int16_t deciDbm);
#endif