Merge pull request #26 from anderl1969/doc/printfileslite

Doc/printfileslite
This commit is contained in:
ManuelW authored and GitHub committed 2026-08-27 13:47:02 +02:00
commit 9a1d394bc8
7 files changed
+11 -1

No files matched your search

Binary file not shown.
Binary file not shown.
Binary file not shown.
+4
View File
@@ -0,0 +1,4 @@
- The **low version** has the same dimensions as the casing of [FilaMan Revamped](https://makerworld.com/de/models/1258715-filaman-revamped-nfc-based-spoolman-scale?designId=1258715-filaman-revamped-nfc-based-spoolman-scale#profileId-1367621).
But because of the missing scale the distance between the PN532 and a NFC tag placed on the marked area might be too narrow, what leads to weak/failed connection.
- The **high version** takes account of this but makes the casing 10mm higher
+3
View File
@@ -68,3 +68,6 @@ Der Pull-up-Widerstand ist nicht zwingend erforderlich, erhöht aber die Zuverl
Folge den Anweisungen in der [Hauptdokumentation](../README.de.md#schritt-für-schritt-installation).
Du benötigst Version 3.3.1 oder neuer für eine funktionierende Hardware-Erkennung und den NFC-only Modus.
## Druck-Dateien
[STLs](../_3D%20Print%20Files/FilaMan_Lite/)
+3
View File
@@ -74,3 +74,6 @@ detect a missing hx711. But it should also work w/o the pull-up resistor.
Follow the instructions in the [main readme](../README.md#step-by-step-installation).
You need version 3.3.1 or later for a working hardware recognition and NFC-only mode.
## Print Files
[STLs](../_3D%20Print%20Files/FilaMan_Lite/)
+1 -1
View File
@@ -9,7 +9,7 @@
; https://docs.platformio.org/page/projectconf.html
[common]
version = "3.4.7"
version = "3.4.8"
to_old_version = "3.4.0"
[env:esp32dev]