diff --git a/_3D Print Files/FilaMan_Lite/FilaLite Bottom.stl b/_3D Print Files/FilaMan_Lite/FilaLite Bottom.stl new file mode 100644 index 0000000..74a0da2 Binary files /dev/null and b/_3D Print Files/FilaMan_Lite/FilaLite Bottom.stl differ diff --git a/_3D Print Files/FilaMan_Lite/FilaLite Top high.stl b/_3D Print Files/FilaMan_Lite/FilaLite Top high.stl new file mode 100644 index 0000000..61ba5e4 Binary files /dev/null and b/_3D Print Files/FilaMan_Lite/FilaLite Top high.stl differ diff --git a/_3D Print Files/FilaMan_Lite/FilaLite Top low.stl b/_3D Print Files/FilaMan_Lite/FilaLite Top low.stl new file mode 100644 index 0000000..82bf943 Binary files /dev/null and b/_3D Print Files/FilaMan_Lite/FilaLite Top low.stl differ diff --git a/_3D Print Files/FilaMan_Lite/readme.md b/_3D Print Files/FilaMan_Lite/readme.md new file mode 100644 index 0000000..5cef242 --- /dev/null +++ b/_3D Print Files/FilaMan_Lite/readme.md @@ -0,0 +1,4 @@ +- The **low version** has the same dimensions as the casing of [FilaMan Revamped](https://makerworld.com/de/models/1258715-filaman-revamped-nfc-based-spoolman-scale?designId=1258715-filaman-revamped-nfc-based-spoolman-scale#profileId-1367621). + But because of the missing scale the distance between the PN532 and a NFC tag placed on the marked area might be too narrow, what leads to weak/failed connection. + +- The **high version** takes account of this but makes the casing 10mm higher diff --git a/docs/NFC-only_mode_de.md b/docs/NFC-only_mode_de.md index b33e52c..3131c5f 100644 --- a/docs/NFC-only_mode_de.md +++ b/docs/NFC-only_mode_de.md @@ -68,3 +68,6 @@ Der Pull-up-Widerstand ist nicht zwingend erforderlich, erhöht aber die Zuverl Folge den Anweisungen in der [Hauptdokumentation](../README.de.md#schritt-für-schritt-installation). Du benötigst Version 3.3.1 oder neuer für eine funktionierende Hardware-Erkennung und den NFC-only Modus. + +## Druck-Dateien +[STLs](../_3D%20Print%20Files/FilaMan_Lite/) diff --git a/docs/NFC-only_mode_en.md b/docs/NFC-only_mode_en.md index 79df270..bd4c667 100644 --- a/docs/NFC-only_mode_en.md +++ b/docs/NFC-only_mode_en.md @@ -74,3 +74,6 @@ detect a missing hx711. But it should also work w/o the pull-up resistor. Follow the instructions in the [main readme](../README.md#step-by-step-installation). You need version 3.3.1 or later for a working hardware recognition and NFC-only mode. + +## Print Files +[STLs](../_3D%20Print%20Files/FilaMan_Lite/) diff --git a/platformio.ini b/platformio.ini index 2a85e71..8ea8388 100644 --- a/platformio.ini +++ b/platformio.ini @@ -9,7 +9,7 @@ ; https://docs.platformio.org/page/projectconf.html [common] -version = "3.4.7" +version = "3.4.8" to_old_version = "3.4.0" [env:esp32dev]