Compare commits

..
51 Commits
Author SHA1 Message Date
ManuelW77 8f4c67eb46 docs: update platformio.ini for version v3.4.10 2026-10-03 11:55:06 +02:00
ManuelW cb3d3952b0 Merge pull request #30 from anderl1969/fix/main-loop-indentation
style: fix indentation in main loop
2026-10-03 11:54:16 +02:00
anderl1969 3662422c1c style: fix indentation in main loop 2026-09-30 16:23:45 +02:00
ManuelW77 a04cc37190 docs: update platformio.ini for version v3.4.9 2026-09-20 13:44:05 +02:00
ManuelW 7e6854cd8a Merge pull request #28 from Fire-Devils/feature/wifi-txpower-setting
Make WiFi TX power configurable, document ESP32-S3 pins
2026-09-20 12:46:54 +02:00
ManuelW77andClaude Opus 5 a5ba8a901a Make WiFi TX power configurable, document ESP32-S3 pins
The transmit power was hardcoded to 19.5 dBm. Some setups need a lower
value (device right next to the AP, weak 3.3V rail), so it is now a user
setting instead of a per-chip constant.

- wlan.cpp: load/save/apply TX power (0.1 dBm steps, NVS key wifi_txpwr,
  default 195), re-applied on GOT_IP so it survives a reconnect
- website.cpp: /api/wifi-power GET/POST with validation
- setup.html: "WiFi Settings" card
- README.md/README.de.md: pin table gets an ESP32-S3 column plus a warning
  that GPIO19/20 are the native USB data lines
- config.cpp: same warning next to the HX711 pin definitions

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-20 12:42:13 +02:00
ManuelW b8cfa1ce98 Merge pull request #27 from KollegeChris/main
Optimizations for ESP32S3
2026-09-20 12:40:37 +02:00
Christoph Stoiber 884c8bcf8f Comment adjusted for ESP32-S3 2026-09-18 13:09:31 +02:00
Christoph Stoiber 502c1d6ab8 Restore wlan power 2026-09-18 13:05:00 +02:00
Christoph Stoiber 3e995faa8c Changed HX711 Pins 2026-09-18 12:06:50 +02:00
Christoph Stoiber 4b93362dd7 Improved for ESP32S3 2026-09-17 18:07:53 +02:00
ManuelW 9a1d394bc8 Merge pull request #26 from anderl1969/doc/printfileslite
Doc/printfileslite
2026-08-27 13:47:02 +02:00
anderl1969 fab9fdae87 Add readme for FilaMan Lite with version details
Added details about low and high version casing dimensions and NFC connection issues.
2026-08-25 09:10:10 +02:00
anderl1969 1939c1b57f Add print files section to english NFC-only mode documentation
Added section for print files with STL links.
2026-08-25 09:01:58 +02:00
anderl1969 026cbd5179 Fix link to STL files in NFC-only mode documentation 2026-08-25 09:00:40 +02:00
anderl1969 15c66af948 Add Druck-Dateien section to NFC-only mode documentation
Added section for print files and STL resources.
2026-08-25 08:53:55 +02:00
anderl1969 8b746b204a added STLs for FilaMan Lite case (without scale) 2026-08-25 08:49:04 +02:00
ManuelW77 5241969c57 docs: update platformio.ini for version v3.4.8 2026-08-21 16:45:42 +02:00
ManuelW77 80825c6cfc fix(net): unblock AsyncTCP during device registration, max TX power, roaming diagnostics
Three independent improvements to the WiFi/webserver stability:

1. /api/register called registerDevice() directly inside the AsyncWebServer
   body handler. That function does a blocking HTTPClient POST with a 5s
   timeout, freezing the AsyncTCP task and tearing down every in-flight HTTP
   and WebSocket connection. It now goes through the existing apiQueue /
   filamanApiTask machinery: the endpoint answers 202 immediately (or 503 if
   the queue is full, which would otherwise leave the UI waiting forever) and
   the outcome is pushed to the browser as a "registerResult" WebSocket
   message. setup.html waits for that message instead of the HTTP response.

2. TX power raised from 17dBm to the 19.5dBm maximum. The reduced setting was
   a compromise against heat, but at marginal signal levels it invites
   AP-side auth/assoc kicks (reason=2/4/9/202).

3. Disconnect/GOT_IP logging now includes BSSID, RSSI and channel, so a device
   bouncing between two APs (mesh/repeater with separate DHCP scopes) can be
   told apart from webserver-induced drops.

Both build environments verified.
2026-08-21 16:43:00 +02:00
ManuelW77andRaul Santamaria 337d7f8983 fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 16:32:07 +02:00
ManuelW77 6749022243 docs: update platformio.ini for version v3.4.7 2026-08-21 16:13:49 +02:00
ManuelW77 1da123a01f Revert "fix(nfc): pulse PN532 RSTPDN before begin()"
This reverts commit 27e16c3d1b.
2026-08-21 16:11:13 +02:00
ManuelW77 028fe85586 docs: update platformio.ini for version v3.4.6 2026-08-21 15:50:02 +02:00
ManuelW77andRaul Santamaria 27e16c3d1b fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 15:48:52 +02:00
ManuelW77 6f9c99edb6 fix(config): restore ESP32 Dev Board pin numbers, gate S3 pins behind CONFIG_IDF_TARGET_ESP32S3
PR #14 (0f43f22) unconditionally replaced the classic ESP32 Dev Board
pin numbers for PN532 (NFC), HX711 (scale) and TTP223 (touch) with the
ESP32-S3 values in the single shared src/config.cpp, even though the
esp32dev build environment (used for all standard-hardware releases)
still links against it unchanged. This caused nfc.begin() to talk to
the wrong physical pins on ESP32 Dev Board hardware, producing a
watchdog reset during NFC init and a subsequent bootloop.

Verified via objdump on both compiled config.cpp.o that esp32dev now
resolves to 32/33/16/17/25 and esp32-s3-devkitc-1 to 15/16/19/20/7.
2026-08-21 15:46:04 +02:00
ManuelW77 a7b97dc0c9 docs: update platformio.ini for version v3.4.5 2026-08-21 15:12:12 +02:00
ManuelW77 2bae0369fa docs: update platformio.ini for version v3.4.4 2026-08-20 12:43:04 +02:00
ManuelW77 1c3aae5f49 update: increment version to 3.4.3 in platformio.ini 2026-08-20 12:42:57 +02:00
ManuelW77 4054a96067 merge: sync devel with main
devel was 16 commits behind main and had diverged with the
esp32-s3-devkitc-1 board support (PR #14) that never made it back to
main. Merges main into devel so both stay on the same feature/fix
baseline; resolves the platformio.ini conflict by keeping devel's
shared [env] section (used by both esp32dev and esp32-s3-devkitc-1)
and carrying forward main's AsyncTCP watchdog fix
(-DCONFIG_ASYNC_TCP_USE_WDT=0).
2026-08-20 09:32:41 +02:00
ManuelW77 f6b6df55c8 docs: update platformio.ini for version v3.4.2 2026-08-12 10:18:20 +02:00
ManuelW77 f3426119e8 fix: update JSON handling to support spool_id and sm_id interchangeably 2026-08-12 10:14:35 +02:00
Manuel Weiser dd508e2e1e fix: update release flow 2026-08-09 16:04:09 +02:00
Manuel Weiser 0ab3db5f2d update version 2026-08-09 15:37:24 +02:00
Manuel Weiser f86d71f8b2 docs: update platformio.ini for beta version v3.4.0-beta1 2026-05-28 19:43:01 +02:00
Manuel Weiser b2ac1e9fcd Merge branch 'devel' 2026-05-28 19:42:53 +02:00
Manuel Weiser f2c1d44f5a chore: update version to 3.4.0 in platformio.ini 2026-05-28 19:42:15 +02:00
Manuel Weiser 3c9a0f17ba docs: update platformio.ini for beta version v3.3.2-beta1 2026-05-28 19:37:26 +02:00
Manuel Weiser 6a9acb9d27 feat: implement scan request handling with timeout and error reporting 2026-05-28 18:58:10 +02:00
Manuel Weiser 9b93d219f9 fix: skip fast-path detection for known spools when a scan request is active 2026-05-28 18:26:08 +02:00
Manuel Weiser f3f51cd6f8 fix: disable WiFiManager auto-reconnect to prevent connection storms 2026-05-28 17:48:42 +02:00
Manuel Weiser 9d3a3411fb feat: enhance RFID tag detection with NDEF support and improved error handling 2026-05-28 17:31:35 +02:00
Manuel Weiser 775700f90f feat: add tag data handling and scan request functionality 2026-05-28 17:04:24 +02:00
Manuel Weiser 9456e6ab91 feat: add support for extended-data tags with OpenSpool/FilaMan protocol 2026-05-28 16:28:13 +02:00
Manuel Weiser 30409a59e0 docs: update platformio.ini for version v3.3.2 2026-05-25 08:29:56 +02:00
Manuel Weiser 17f86a0094 feat: add package-lock.json and update WiFi settings for improved stability 2026-05-25 08:29:26 +02:00
ManuelW 0d38728072 Merge pull request #14 from KollegeChris/esp32-s3
Added configuration for esp32-s3
2026-05-19 11:09:07 +02:00
Christoph Stoiber 0f43f228e7 Added configuration for esp32-s3 2026-05-05 21:20:57 +02:00
ManuelW eb1c032444 Merge pull request #12 from anderl1969/feature/hw-detection
Documentation for NFC-only mode
2026-04-06 16:21:04 +02:00
anderl1969 696b8ba518 docs: German and English documentation for the NFC-only mode 2026-03-30 15:05:23 +02:00
anderl1969 728c40f0fa docs: images for NFC-only mode 2026-03-30 00:13:12 +02:00
anderl1969 d0d2dbb274 init NFC-only mode documentation
Added convenience note about using a small device for NFC-tag writing.
2026-03-30 00:10:55 +02:00
28 changed files with 1222 additions and 244 deletions

No files matched your search

+1 -1
View File
@@ -35,7 +35,7 @@ jobs:
gitea-release:
needs: detect-provider
if: needs.detect-provider.outputs.provider == 'gitea'
if: needs.detect-provider.outputs.provider == 'gitea' && !contains(github.ref_name, '-beta')
uses: ./.github/workflows/gitea-release.yml
secrets:
GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+380
View File
@@ -0,0 +1,380 @@
{
"name": ".opencode",
"lockfileVersion": 3,
"requires": true,
"packages": {
"": {
"dependencies": {
"@opencode-ai/plugin": "1.15.10"
}
},
"node_modules/@msgpackr-extract/msgpackr-extract-darwin-arm64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-darwin-arm64/-/msgpackr-extract-darwin-arm64-3.0.3.tgz",
"integrity": "sha512-QZHtlVgbAdy2zAqNA9Gu1UpIuI8Xvsd1v8ic6B2pZmeFnFcMWiPLfWXh7TVw4eGEZ/C9TH281KwhVoeQUKbyjw==",
"cpu": [
"arm64"
],
"license": "MIT",
"optional": true,
"os": [
"darwin"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-darwin-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-darwin-x64/-/msgpackr-extract-darwin-x64-3.0.3.tgz",
"integrity": "sha512-mdzd3AVzYKuUmiWOQ8GNhl64/IoFGol569zNRdkLReh6LRLHOXxU4U8eq0JwaD8iFHdVGqSy4IjFL4reoWCDFw==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"darwin"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-arm": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-arm/-/msgpackr-extract-linux-arm-3.0.3.tgz",
"integrity": "sha512-fg0uy/dG/nZEXfYilKoRe7yALaNmHoYeIoJuJ7KJ+YyU2bvY8vPv27f7UKhGRpY6euFYqEVhxCFZgAUNQBM3nw==",
"cpu": [
"arm"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-arm64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-arm64/-/msgpackr-extract-linux-arm64-3.0.3.tgz",
"integrity": "sha512-YxQL+ax0XqBJDZiKimS2XQaf+2wDGVa1enVRGzEvLLVFeqa5kx2bWbtcSXgsxjQB7nRqqIGFIcLteF/sHeVtQg==",
"cpu": [
"arm64"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-x64/-/msgpackr-extract-linux-x64-3.0.3.tgz",
"integrity": "sha512-cvwNfbP07pKUfq1uH+S6KJ7dT9K8WOE4ZiAcsrSes+UY55E/0jLYc+vq+DO7jlmqRb5zAggExKm0H7O/CBaesg==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-win32-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-win32-x64/-/msgpackr-extract-win32-x64-3.0.3.tgz",
"integrity": "sha512-x0fWaQtYp4E6sktbsdAqnehxDgEc/VwM7uLsRCYWaiGu0ykYdZPiS8zCWdnjHwyiumousxfBm4SO31eXqwEZhQ==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"win32"
]
},
"node_modules/@opencode-ai/plugin": {
"version": "1.15.10",
"resolved": "https://registry.npmjs.org/@opencode-ai/plugin/-/plugin-1.15.10.tgz",
"integrity": "sha512-V2p7CvpBtKWB+FID7Dl1y0Ci02zUT40A9b2RD9R9BOiuD8ZcKhHWov+irN0xVJA0Eg6OhEBfA0lPKRn1FNKPlw==",
"license": "MIT",
"dependencies": {
"@opencode-ai/sdk": "1.15.10",
"effect": "4.0.0-beta.66",
"zod": "4.1.8"
},
"peerDependencies": {
"@opentui/core": ">=0.2.15",
"@opentui/keymap": ">=0.2.15",
"@opentui/solid": ">=0.2.15"
},
"peerDependenciesMeta": {
"@opentui/core": {
"optional": true
},
"@opentui/keymap": {
"optional": true
},
"@opentui/solid": {
"optional": true
}
}
},
"node_modules/@opencode-ai/sdk": {
"version": "1.15.10",
"resolved": "https://registry.npmjs.org/@opencode-ai/sdk/-/sdk-1.15.10.tgz",
"integrity": "sha512-CUhpmMGGOqzvPnNNjjWmEIodAfP6Qnuki2ChIUKWYF7UImZ4zUcMZnzO5BtUxu/Ni1P8qzWxDioXs+7aIZQEhA==",
"license": "MIT",
"dependencies": {
"cross-spawn": "7.0.6"
}
},
"node_modules/@standard-schema/spec": {
"version": "1.1.0",
"resolved": "https://registry.npmjs.org/@standard-schema/spec/-/spec-1.1.0.tgz",
"integrity": "sha512-l2aFy5jALhniG5HgqrD6jXLi/rUWrKvqN/qJx6yoJsgKhblVd+iqqU4RCXavm/jPityDo5TCvKMnpjKnOriy0w==",
"license": "MIT"
},
"node_modules/cross-spawn": {
"version": "7.0.6",
"resolved": "https://registry.npmjs.org/cross-spawn/-/cross-spawn-7.0.6.tgz",
"integrity": "sha512-uV2QOWP2nWzsy2aMp8aRibhi9dlzF5Hgh5SHaB9OiTGEyDTiJJyx0uy51QXdyWbtAHNua4XJzUKca3OzKUd3vA==",
"license": "MIT",
"dependencies": {
"path-key": "^3.1.0",
"shebang-command": "^2.0.0",
"which": "^2.0.1"
},
"engines": {
"node": ">= 8"
}
},
"node_modules/detect-libc": {
"version": "2.1.2",
"resolved": "https://registry.npmjs.org/detect-libc/-/detect-libc-2.1.2.tgz",
"integrity": "sha512-Btj2BOOO83o3WyH59e8MgXsxEQVcarkUOpEYrubB0urwnN10yQ364rsiByU11nZlqWYZm05i/of7io4mzihBtQ==",
"license": "Apache-2.0",
"optional": true,
"engines": {
"node": ">=8"
}
},
"node_modules/effect": {
"version": "4.0.0-beta.66",
"resolved": "https://registry.npmjs.org/effect/-/effect-4.0.0-beta.66.tgz",
"integrity": "sha512-4arEr62cziFa8BBVDUwJCJJmaVepXf/kRg7KtC0h8+bufngscrHbwWFhr9c+HonwOF+31U3iD3xUJmw9KzX7Dw==",
"license": "MIT",
"dependencies": {
"@standard-schema/spec": "^1.1.0",
"fast-check": "^4.6.0",
"find-my-way-ts": "^0.1.6",
"ini": "^6.0.0",
"kubernetes-types": "^1.30.0",
"msgpackr": "^1.11.9",
"multipasta": "^0.2.7",
"toml": "^4.1.1",
"uuid": "^13.0.0",
"yaml": "^2.8.3"
}
},
"node_modules/fast-check": {
"version": "4.8.0",
"resolved": "https://registry.npmjs.org/fast-check/-/fast-check-4.8.0.tgz",
"integrity": "sha512-GOJ158CUMnN6cSahsv4+ExARvIDuzzinFjkp0E9WtiBa5zcVeLozVkWaE4IzFcc+Y48Wp1EDlUZsXRyAztQcSg==",
"funding": [
{
"type": "individual",
"url": "https://github.com/sponsors/dubzzz"
},
{
"type": "opencollective",
"url": "https://opencollective.com/fast-check"
}
],
"license": "MIT",
"dependencies": {
"pure-rand": "^8.0.0"
},
"engines": {
"node": ">=12.17.0"
}
},
"node_modules/find-my-way-ts": {
"version": "0.1.6",
"resolved": "https://registry.npmjs.org/find-my-way-ts/-/find-my-way-ts-0.1.6.tgz",
"integrity": "sha512-a85L9ZoXtNAey3Y6Z+eBWW658kO/MwR7zIafkIUPUMf3isZG0NCs2pjW2wtjxAKuJPxMAsHUIP4ZPGv0o5gyTA==",
"license": "MIT"
},
"node_modules/ini": {
"version": "6.0.0",
"resolved": "https://registry.npmjs.org/ini/-/ini-6.0.0.tgz",
"integrity": "sha512-IBTdIkzZNOpqm7q3dRqJvMaldXjDHWkEDfrwGEQTs5eaQMWV+djAhR+wahyNNMAa+qpbDUhBMVt4ZKNwpPm7xQ==",
"license": "ISC",
"engines": {
"node": "^20.17.0 || >=22.9.0"
}
},
"node_modules/isexe": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/isexe/-/isexe-2.0.0.tgz",
"integrity": "sha512-RHxMLp9lnKHGHRng9QFhRCMbYAcVpn69smSGcq3f36xjgVVWThj4qqLbTLlq7Ssj8B+fIQ1EuCEGI2lKsyQeIw==",
"license": "ISC"
},
"node_modules/kubernetes-types": {
"version": "1.30.0",
"resolved": "https://registry.npmjs.org/kubernetes-types/-/kubernetes-types-1.30.0.tgz",
"integrity": "sha512-Dew1okvhM/SQcIa2rcgujNndZwU8VnSapDgdxlYoB84ZlpAD43U6KLAFqYo17ykSFGHNPrg0qry0bP+GJd9v7Q==",
"license": "Apache-2.0"
},
"node_modules/msgpackr": {
"version": "1.11.12",
"resolved": "https://registry.npmjs.org/msgpackr/-/msgpackr-1.11.12.tgz",
"integrity": "sha512-RBdJ1Un7yGlXWajrkxcSa93nvQ0w4zBf60c0yYv7YtBelP8H2FA7XsfBbMHtXKXUMUxH7zV3Zuozh+kUQWhHvg==",
"license": "MIT",
"optionalDependencies": {
"msgpackr-extract": "^3.0.2"
}
},
"node_modules/msgpackr-extract": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/msgpackr-extract/-/msgpackr-extract-3.0.3.tgz",
"integrity": "sha512-P0efT1C9jIdVRefqjzOQ9Xml57zpOXnIuS+csaB4MdZbTdmGDLo8XhzBG1N7aO11gKDDkJvBLULeFTo46wwreA==",
"hasInstallScript": true,
"license": "MIT",
"optional": true,
"dependencies": {
"node-gyp-build-optional-packages": "5.2.2"
},
"bin": {
"download-msgpackr-prebuilds": "bin/download-prebuilds.js"
},
"optionalDependencies": {
"@msgpackr-extract/msgpackr-extract-darwin-arm64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-darwin-x64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-arm": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-arm64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-x64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-win32-x64": "3.0.3"
}
},
"node_modules/multipasta": {
"version": "0.2.7",
"resolved": "https://registry.npmjs.org/multipasta/-/multipasta-0.2.7.tgz",
"integrity": "sha512-KPA58d68KgGil15oDqXjkUBEBYc00XvbPj5/X+dyzeo/lWm9Nc25pQRlf1D+gv4OpK7NM0J1odrbu9JNNGvynA==",
"license": "MIT"
},
"node_modules/node-gyp-build-optional-packages": {
"version": "5.2.2",
"resolved": "https://registry.npmjs.org/node-gyp-build-optional-packages/-/node-gyp-build-optional-packages-5.2.2.tgz",
"integrity": "sha512-s+w+rBWnpTMwSFbaE0UXsRlg7hU4FjekKU4eyAih5T8nJuNZT1nNsskXpxmeqSK9UzkBl6UgRlnKc8hz8IEqOw==",
"license": "MIT",
"optional": true,
"dependencies": {
"detect-libc": "^2.0.1"
},
"bin": {
"node-gyp-build-optional-packages": "bin.js",
"node-gyp-build-optional-packages-optional": "optional.js",
"node-gyp-build-optional-packages-test": "build-test.js"
}
},
"node_modules/path-key": {
"version": "3.1.1",
"resolved": "https://registry.npmjs.org/path-key/-/path-key-3.1.1.tgz",
"integrity": "sha512-ojmeN0qd+y0jszEtoY48r0Peq5dwMEkIlCOu6Q5f41lfkswXuKtYrhgoTpLnyIcHm24Uhqx+5Tqm2InSwLhE6Q==",
"license": "MIT",
"engines": {
"node": ">=8"
}
},
"node_modules/pure-rand": {
"version": "8.4.0",
"resolved": "https://registry.npmjs.org/pure-rand/-/pure-rand-8.4.0.tgz",
"integrity": "sha512-IoM8YF/jY0hiugFo/wOWqfmarlE6J0wc6fDK1PhftMk7MGhVZl88sZimmqBBFomLOCSmcCCpsfj7wXASCpvK9A==",
"funding": [
{
"type": "individual",
"url": "https://github.com/sponsors/dubzzz"
},
{
"type": "opencollective",
"url": "https://opencollective.com/fast-check"
}
],
"license": "MIT"
},
"node_modules/shebang-command": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/shebang-command/-/shebang-command-2.0.0.tgz",
"integrity": "sha512-kHxr2zZpYtdmrN1qDjrrX/Z1rR1kG8Dx+gkpK1G4eXmvXswmcE1hTWBWYUzlraYw1/yZp6YuDY77YtvbN0dmDA==",
"license": "MIT",
"dependencies": {
"shebang-regex": "^3.0.0"
},
"engines": {
"node": ">=8"
}
},
"node_modules/shebang-regex": {
"version": "3.0.0",
"resolved": "https://registry.npmjs.org/shebang-regex/-/shebang-regex-3.0.0.tgz",
"integrity": "sha512-7++dFhtcx3353uBaq8DDR4NuxBetBzC7ZQOhmTQInHEd6bSrXdiEyzCvG07Z44UYdLShWUyXt5M/yhz8ekcb1A==",
"license": "MIT",
"engines": {
"node": ">=8"
}
},
"node_modules/toml": {
"version": "4.1.1",
"resolved": "https://registry.npmjs.org/toml/-/toml-4.1.1.tgz",
"integrity": "sha512-EBJnVBr3dTXdA89WVFoAIPUqkBjxPMwRqsfuo1r240tKFHXv3zgca4+NJib/h6TyvGF7vOawz0jGuryJCdNHrw==",
"license": "MIT",
"engines": {
"node": ">=20"
}
},
"node_modules/uuid": {
"version": "13.0.2",
"resolved": "https://registry.npmjs.org/uuid/-/uuid-13.0.2.tgz",
"integrity": "sha512-vzi9uRZ926x4XV73S/4qQaTwPXM2JBj6/6lI/byHH1jOpCzb0zDbfytgA9LcN/hzb2l7WQSQnxITOVx5un/wGw==",
"funding": [
"https://github.com/sponsors/broofa",
"https://github.com/sponsors/ctavan"
],
"license": "MIT",
"bin": {
"uuid": "dist-node/bin/uuid"
}
},
"node_modules/which": {
"version": "2.0.2",
"resolved": "https://registry.npmjs.org/which/-/which-2.0.2.tgz",
"integrity": "sha512-BLI3Tl1TW3Pvl70l3yq3Y64i+awpwXqsGBYWkkqMtnbXgrMD+yj7rhW0kuEDxzJaYXGjEW5ogapKNMEKNMjibA==",
"license": "ISC",
"dependencies": {
"isexe": "^2.0.0"
},
"bin": {
"node-which": "bin/node-which"
},
"engines": {
"node": ">= 8"
}
},
"node_modules/yaml": {
"version": "2.9.0",
"resolved": "https://registry.npmjs.org/yaml/-/yaml-2.9.0.tgz",
"integrity": "sha512-2AvhNX3mb8zd6Zy7INTtSpl1F15HW6Wnqj0srWlkKLcpYl/gMIMJiyuGq2KeI2YFxUPjdlB+3Lc10seMLtL4cA==",
"license": "ISC",
"bin": {
"yaml": "bin.mjs"
},
"engines": {
"node": ">= 14.6"
},
"funding": {
"url": "https://github.com/sponsors/eemeli"
}
},
"node_modules/zod": {
"version": "4.1.8",
"license": "MIT",
"funding": {
"url": "https://github.com/sponsors/colinhacks"
}
}
}
}
+28 -23
View File
@@ -2,17 +2,18 @@
⚠️ **Wichtig: Ab Version 3.0.0 erfordert dieses System das [FilaMan-System](https://github.com/Fire-Devils/filaman-system) Backend. Frühere direkte Integrationen (Spoolman, MQTT, Bambu Lab) wurden in das zentrale FilaMan-System verschoben.**
FilaMan ist ein Werkzeug zur Filamentverwaltung für den 3D-Druck. Es verwendet ESP32-Hardware zur Gewichtsmessung und Verwaltung von NFC-Tags.
Benutzer können Filamentspulen verwalten und das Gerät über eine Weboberfläche konfigurieren.
FilaMan ist ein Werkzeug zur Filamentverwaltung für den 3D-Druck. Es verwendet ESP32-Hardware zur Gewichtsmessung und Verwaltung von NFC-Tags.
Benutzer können Filamentspulen verwalten und das Gerät über eine Weboberfläche konfigurieren.
Das System integriert sich nahtlos in das [FilaMan-System](https://github.com/Fire-Devils/filaman-system).
**NEU ab 3.3.1:** Eine abgespeckte Version ohne Waage ist ebenfalls möglich. Details finden sich unter [NFC-only Modus](docs/NFC-only_mode_de.md).
![Waage](./img/scale_trans.png)
Weitere Bilder finden Sie im [img Ordner](/img/)
oder auf meiner Website: [FilaMan Website](https://www.filaman.app)
Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Weitere Bilder finden Sie im [img Ordner](/img/)
oder auf meiner Website: [FilaMan Website](https://www.filaman.app)
Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Discord Server: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
## NEU: Recycling Fabrik
@@ -27,7 +28,7 @@ dass die Spulen automatisch erkannt und über die FilaMan-Waage direkt in das Fi
**Was ist die Recycling Fabrik?**
Die Recycling Fabrik ist ein deutsches Unternehmen, das sich der Entwicklung und Herstellung von nachhaltigem 3D-Druck-Filament verschrieben hat.
Die Recycling Fabrik ist ein deutsches Unternehmen, das sich der Entwicklung und Herstellung von nachhaltigem 3D-Druck-Filament verschrieben hat.
Ihre Filamente bestehen zu 100 % aus recyceltem Material von Endkunden und aus der Industrie – für eine umweltbewusste und ressourcenschonende Zukunft.
Weitere Informationen und Produkte finden Sie hier: [www.recyclingfabrik.com](https://www.recyclingfabrik.com)
@@ -45,7 +46,7 @@ Weitere Informationen und Produkte finden Sie hier: [www.recyclingfabrik.com](ht
### Weboberflächen-Features
- **Echtzeit-Updates:** WebSocket-Verbindung für Live-Datenaktualisierungen.
- **NFC-Tag-Verwaltung:**
- **NFC-Tag-Verwaltung:**
- Schreiben von Filamentdaten auf NFC-Tags.
- Unterstützt automatische Spulenerkennung in kompatiblen Systemen.
- **FilaMan-System Integration:**
@@ -110,19 +111,23 @@ Wenn Sie einen Hersteller-NFC-Tag zum ersten Mal scannen:
### Pin-Konfiguration
| Komponente | ESP32 Pin |
|-------------------|-----------|
| HX711 DOUT | 16 |
| HX711 SCK | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
| Komponente | ESP32 Pin | ESP32-S3 Pin |
|-------------------|-----------|--------------|
| HX711 DOUT | 16 | 5 |
| HX711 SCK | 17 | 6 |
| OLED SDA | 21 | 8 |
| OLED SCL | 22 | 9 |
| PN532 IRQ | 32 | 15 |
| PN532 RESET | 33 | 16 |
| PN532 SDA | 21 | 8 |
| PN532 SCL | 22 | 9 |
| TTP223 I/O | 25 | 7 |
**!! Stellen Sie sicher, dass die DIP-Schalter am PN532 auf I2C eingestellt sind.**
Die I2C-Pins sind die Arduino-Standardwerte des jeweiligen Chips und werden im Code nicht explizit gesetzt.
**!! ESP32-S3: GPIO19/GPIO20 nicht für den HX711 verwenden.** Das sind die nativen USB-Datenleitungen (D-/D+), die auf dem DevKitC-1 an der "USB"-Buchse liegen. Der HX711 wird dort nur unzuverlässig erkannt.
**!! Stellen Sie sicher, dass die DIP-Schalter am PN532 auf I2C eingestellt sind.**
**Verwenden Sie den 3V-Pin des ESP für den Touch-Sensor.**
![Verkabelung](./img/Schaltplan.png)
@@ -130,10 +135,10 @@ Wenn Sie einen Hersteller-NFC-Tag zum ersten Mal scannen:
![meineVerkabelung](./img/IMG_2589.jpeg)
![meineVerkabelung](./img/IMG_2590.jpeg)
*Die Wägezelle wird an die meisten HX711-Module wie folgt angeschlossen:
E+ rot
E- schwarz
A- weiß
*Die Wägezelle wird an die meisten HX711-Module wie folgt angeschlossen:
E+ rot
E- schwarz
A- weiß
A+ grün*
## Software-Abhängigkeiten
+28 -23
View File
@@ -2,17 +2,18 @@
⚠️ **Important: Starting with v3.0.0, this system requires the [FilaMan-System](https://github.com/Fire-Devils/filaman-system) backend. Previous direct integrations (Spoolman, MQTT, Bambu Lab) have been moved to the central FilaMan-System.**
FilaMan is a filament management tool for 3D printing. It uses ESP32 hardware for weight measurement and NFC tag management.
Users can manage filament spools and configure the device via a web interface.
FilaMan is a filament management tool for 3D printing. It uses ESP32 hardware for weight measurement and NFC tag management.
Users can manage filament spools and configure the device via a web interface.
The system integrates seamlessly with the [FilaMan-System](https://github.com/Fire-Devils/filaman-system).
**NEW since 3.3.1:** A reduced version w/o scale is also available. Details can be found in [NFC-only mode](docs/NFC-only_mode_en.md).
![Scale](./img/scale_trans.png)
More Images can be found in the [img Folder](/img/)
or my website: [FilaMan Website](https://www.filaman.app)
german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
More Images can be found in the [img Folder](/img/)
or my website: [FilaMan Website](https://www.filaman.app)
german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Discord Server: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
## NEW: Recycling Fabrik
@@ -27,7 +28,7 @@ that the spools can be automatically recognized and imported into the FilaMan-Sy
**What is Recycling Fabrik?**
Recycling Fabrik is a German company dedicated to developing and manufacturing sustainable 3D printing filament.
Recycling Fabrik is a German company dedicated to developing and manufacturing sustainable 3D printing filament.
Their filaments are made from 100% recycled material from both end customers and industry – for an environmentally conscious and resource-saving future.
More information and products can be found here: [www.recyclingfabrik.com](https://www.recyclingfabrik.com)
@@ -45,7 +46,7 @@ More information and products can be found here: [www.recyclingfabrik.com](https
### Web Interface Features
- **Real-time Updates:** WebSocket connection for live data updates.
- **NFC Tag Management:**
- **NFC Tag Management:**
- Write filament data to NFC tags.
- Supports automatic Spool detection in compatible systems.
- **FilaMan-System Integration:**
@@ -110,19 +111,23 @@ When you scan a manufacturer NFC tag for the first time:
### Pin Configuration
| Component | ESP32 Pin |
|-------------------|-----------|
| HX711 DOUT | 16 |
| HX711 SCK | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
| Component | ESP32 Pin | ESP32-S3 Pin |
|-------------------|-----------|--------------|
| HX711 DOUT | 16 | 5 |
| HX711 SCK | 17 | 6 |
| OLED SDA | 21 | 8 |
| OLED SCL | 22 | 9 |
| PN532 IRQ | 32 | 15 |
| PN532 RESET | 33 | 16 |
| PN532 SDA | 21 | 8 |
| PN532 SCL | 22 | 9 |
| TTP223 I/O | 25 | 7 |
**!! Make sure that the DIP switches on the PN532 are set to I2C**
The I2C pins are the Arduino defaults for each chip and are not set explicitly in the code.
**!! ESP32-S3: do not use GPIO19/GPIO20 for the HX711.** These are the native USB data lines (D-/D+) and are wired to the "USB" connector on the DevKitC-1, which makes the HX711 detection unreliable.
**!! Make sure that the DIP switches on the PN532 are set to I2C**
**Use the 3V pin from the ESP for the touch sensor**
![Wiring](./img/Schaltplan.png)
@@ -130,10 +135,10 @@ When you scan a manufacturer NFC tag for the first time:
![myWiring](./img/IMG_2589.jpeg)
![myWiring](./img/IMG_2590.jpeg)
*The load cell is connected to most HX711 modules as follows:
E+ red
E- black
A- white
*The load cell is connected to most HX711 modules as follows:
E+ red
E- black
A- white
A+ green*
## Software Dependencies
Binary file not shown.
Binary file not shown.
Binary file not shown.
+4
View File
@@ -0,0 +1,4 @@
- The **low version** has the same dimensions as the casing of [FilaMan Revamped](https://makerworld.com/de/models/1258715-filaman-revamped-nfc-based-spoolman-scale?designId=1258715-filaman-revamped-nfc-based-spoolman-scale#profileId-1367621).
But because of the missing scale the distance between the PN532 and a NFC tag placed on the marked area might be too narrow, what leads to weak/failed connection.
- The **high version** takes account of this but makes the casing 10mm higher
+74 -3
View File
@@ -87,6 +87,24 @@
</div>
<div id="sleepStatusMessage" style="margin-top: 0.5rem;"></div>
</div>
<div class="fm-card">
<h2>WiFi Settings</h2>
<div class="fm-form-group" style="margin-top: 1rem;">
<label class="fm-label" for="txPowerSelect">WiFi Transmit Power</label>
<select id="txPowerSelect" class="fm-input">
<option value="195">19.5 dBm (default, maximum range)</option>
<option value="170">17 dBm</option>
<option value="150">15 dBm</option>
<option value="130">13 dBm</option>
<option value="110">11 dBm</option>
<option value="85">8.5 dBm (lowest)</option>
</select>
<p style="font-size: 0.8rem; margin-top: 0.5rem;">Only lower this if your router keeps dropping the device, or if it sits right next to the access point. Applies immediately, no restart needed.</p>
</div>
<div id="txPowerStatusMessage" style="margin-top: 0.5rem;"></div>
</div>
</main>
</div>
@@ -160,6 +178,45 @@
});
});
// WiFi transmit power setting
fetch('/api/wifi-power')
.then(response => response.json())
.then(data => {
const sel = document.getElementById('txPowerSelect');
const val = String(data.txPower);
let matched = false;
for (let i = 0; i < sel.options.length; i++) {
if (sel.options[i].value === val) { sel.value = val; matched = true; break; }
}
if (!matched) sel.value = '195';
})
.catch(error => console.error('Error fetching wifi power:', error));
document.getElementById('txPowerSelect').addEventListener('change', function() {
const msg = document.getElementById('txPowerStatusMessage');
fetch('/api/wifi-power', {
method: 'POST',
headers: { 'Content-Type': 'application/json' },
body: JSON.stringify({ txPower: parseInt(this.value) })
})
.then(response => response.json())
.then(data => {
if (data.success) {
msg.textContent = 'Saved.';
msg.style.color = 'var(--success-text)';
setTimeout(() => { msg.textContent = ''; }, 2000);
} else {
msg.textContent = 'Error saving setting.';
msg.style.color = 'var(--error-text)';
}
})
.catch(error => {
msg.textContent = 'Error saving setting.';
msg.style.color = 'var(--error-text)';
console.error('Error saving wifi power:', error);
});
});
document.getElementById('registerBtn').addEventListener('click', () => {
const url = document.getElementById('filamanUrl').value;
const code = document.getElementById('deviceCode').value;
@@ -182,9 +239,10 @@
.then(response => response.json())
.then(data => {
if (data.success) {
statusMessage.textContent = 'Registration successful!';
statusMessage.style.color = 'var(--success-text)';
setTimeout(() => location.reload(), 2000);
// 202 Accepted: Registrierung wurde nur eingereiht. Das
// tatsaechliche Ergebnis kommt per WebSocket ('registerResult').
statusMessage.textContent = 'Registering device...';
statusMessage.style.color = 'var(--text-muted)';
} else {
statusMessage.textContent = 'Registration failed. Please check your code and URL.';
statusMessage.style.color = 'var(--error-text)';
@@ -208,6 +266,19 @@
dot.className = data.filaman_connected ? 'status-dot online' : 'status-dot offline';
document.getElementById('ramStatus').textContent = data.freeHeap + ' KB free';
}
else if (data.type === 'registerResult') {
// Die Registrierung laeuft asynchron im API-Task; /api/register
// antwortet sofort mit 202, das Ergebnis kommt hier an.
const statusMessage = document.getElementById('statusMessage');
if (data.success) {
statusMessage.textContent = 'Registration successful!';
statusMessage.style.color = 'var(--success-text)';
setTimeout(() => location.reload(), 2000);
} else {
statusMessage.textContent = 'Registration failed. Please check your code and URL.';
statusMessage.style.color = 'var(--error-text)';
}
}
};
ws.onclose = () => setTimeout(connectWebSocket, 2000);
}
+73
View File
@@ -0,0 +1,73 @@
# NFC-only Modus
## Beschreibung
Es kann praktisch sein, ein kleines Gerät in der Nähe deines Desktop-Computers zu haben, wenn du neue Spulen in deine Datenbank hinzufügst.
So kannst du sofort NFC-Tags für sie schreiben. Da keine Waage erforderlich ist (das Gewicht einer neuen Spule ist in der Regel bekannt), ist es sinnvoll, auf diese Funktion zu verzichten, um einen kleineren Formfaktor zu erreichen.
![FilaLite_no_scale](../img/FilaLite_no_scale.png)
## Bedienung
Bevor du das NFC-only Terminal verwenden kannst, musst du es in der `FilaMan System App` registrieren, wie bei jeder anderen Waage auch.
### Tag schreiben
Hauptzweck ist das Schreiben neuer NFC-Tags.
Du startest den Schreibvorgang in der `FilaMan System App` (Web-GUI). Dann wählst du dein NFC-Gerät aus und folgst den Anweisungen auf dem Display.
### Tag lesen
Das Gerät kann Tags zwar lesen, sinnvolle Anwendungsfälle sind jedoch ohne Waage eingeschränkt.
Du kannst trotzdem eine Spule identifizieren und ihr einen Standort mit dem entsprechenden Standort-Tag zuweisen.
Aber ehrlich gesagt: der Hauptzweck des NFC-only Gerätes ist **TAG SCHREIBEN**.
## NFC-only Modus
Beim Start versucht der ESP32, den HX711 (Verstärker) zusammen mit einem angeschlossenen Loadcell-Sensor zu erkennen. Wenn das gelingt, startet er im Normalmodus mit voller Funktionalität.
Andernfalls schaltet er in den **NFC-only Modus**!
Statt einer Gewichtsanzeige zeigt das Display eine Bereitschaftsmeldung. Zusätzlich ist das Waagensymbol in der oberen Zeile durchgestrichen.
![Ready Prompt](../img/no_scale_ready.png)
## Aufbau / Installation
### Hardware
Die Verkabelung der Hardware ist gleich wie bei der originalen, voll ausgestatteten FilaMan-Waage. Es gibt nur 3 Unterschiede:
- Kein HX711 angeschlossen (und natürlich keine Loadcell)
- Kein Tastensensor (ohne Waage ist kein Tarieren nötig)
- optional: 10k Pull-up-Widerstand an Pin 16 (RX2)
Der Pull-up-Widerstand ist nicht zwingend erforderlich, erhöht aber die Zuverlässigkeit beim Erkennen eines fehlenden HX711. Ohne Pull-up-Widerstand sollte es aber ebenfalls funktionieren.
![Schaltplan mit Pull-Up](../img/Schaltplan%20NFC-only%20pullup.png)
| Komponente | ESP32 Pin |
| ---- | ---- |
| 10k Pull-up | 16 |
| | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
#### PN532
- **!! Stelle sicher, dass die DIP-Schalter des PN532 auf I2C gestellt sind**
- Verbinde `VCC` mit 5V
#### OLED
- Verbinde `VCC` mit 3,3V
#### 10k Widerstand (optional)
- Verbinde den Widerstand mit PIN 16 (wo normalerweise der DOUT des HX711 angeschlossen wäre) und 5V
### Software
Folge den Anweisungen in der [Hauptdokumentation](../README.de.md#schritt-für-schritt-installation).
Du benötigst Version 3.3.1 oder neuer für eine funktionierende Hardware-Erkennung und den NFC-only Modus.
## Druck-Dateien
[STLs](../_3D%20Print%20Files/FilaMan_Lite/)
+79
View File
@@ -0,0 +1,79 @@
# NFC-only mode
## Description
It may be convenient to have a small device near your desktop computer when adding new spools to your database.
So you are able to write NFC-tags for them right away. Since there is no need for a scale (the weight of a new
spool should be well known), it is pleasant to leave the scale functionality out in advance of a smaller footprint.
![FilaLite_no_scale](../img/FilaLite_no_scale.png)
## Usage
Before you can use the NFC-only device, you have to register it to your FilaMan System App as
you would do with any regular scale device.
### Tag Writing
Its main purpose is to write new NFC tags.
You start the writing process from within the FilaMan System App (Web GUI). You than select
your NFC device and follow the instructions on the device display.
### Tag Reading
Although the device is fully capable of tag reading, its use cases are limited due to the lack of a scale.
But you can still identify a spool and assign it to a location with the according location tag.
But to be honest: the main purpose of the NFC-only device is **TAG WRITING**.
## NFC-only mode
During startup, the ESP32 tries to detect the HX711 (amplifier) together with a connected
loadcell sensor. If successful it starts into normal mode with full functionality.
Otherwise it switches in **NFC-only mode!**
Instead of a weight reading the display shows a ready prompts. Additionally the scale icon
in the top row is crossed out.
![Ready Prompt](../img/no_scale_ready.png)
## Build / Installation
### Hardware
The wiring of the hardware is the same as the original, fully equipped FilaMan scale. There are only 3 differences:
- No HX711 connected (also no loadcell of course)
- No touch sensor (without scale there is no need to tare)
- optional: 10k pull-up resistor on Pin 16 (RX2)
The pull-up resistor is not mandatory, but for good measure. It makes it more reliable to
detect a missing hx711. But it should also work w/o the pull-up resistor.
![Schaltplan mit Pull-Up](../img/Schaltplan%20NFC-only%20pullup.png)
| Component | ESP32 Pin |
| ---- | ---- |
| 10k pull-up | 16 |
| | 17 |
| OLED SDA | 21 |
| OLED SCL. | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
#### PN532
- !! Make sure that the DIP switches on the PN532 are set to I2C
- Connect `VCC` to 5V
#### OLED
- Connect `VCC` to 3.3V
#### 10k Resistor (optional)
- Connect to PIN 16 (where normally the DOUT of the HX711 would connect to) and 5V
### Software
Follow the instructions in the [main readme](../README.md#step-by-step-installation).
You need version 3.3.1 or later for a working hardware recognition and NFC-only mode.
## Print Files
[STLs](../_3D%20Print%20Files/FilaMan_Lite/)
Binary file not shown.
Binary file not shown.

After

Width:  |  Height:  |  Size: 1.4 MiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 205 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 59 KiB

+53 -63
View File
@@ -9,79 +9,69 @@
; https://docs.platformio.org/page/projectconf.html
[common]
version = "3.3.1"
to_old_version = "3.2.0"
version = "3.4.10"
to_old_version = "3.4.0"
##
[env:esp32dev]
platform = espressif32@^6.0.0
board = esp32dev
framework = arduino
monitor_speed = 115200
#monitor_port = /dev/cu.usbmodem01
lib_deps =
tzapu/WiFiManager @ ^2.0.17
https://github.com/me-no-dev/ESPAsyncWebServer.git#master
https://github.com/esphome/AsyncTCP.git
bogde/HX711 @ ^0.7.5
adafruit/Adafruit SSD1306 @ ^2.5.13
adafruit/Adafruit GFX Library @ ^1.11.11
adafruit/Adafruit PN532 @ ^1.3.3
bblanchon/ArduinoJson @ ^7.3.0
knolleary/PubSubClient @ ^2.8
digitaldragon/SSLClient @ ^1.3.2
; Enable SPIFFS upload
board_build.filesystem = littlefs
; Update partition settings
board_build.partitions = partitions.csv
board_upload.flash_size = 4MB
board_build.flash_mode = dio
board_upload.flash_freq = "40m"
build_flags =
-Os
-ffunction-sections
-fdata-sections
#-DNDEBUG
-mtext-section-literals
-DVERSION=\"${common.version}\"
-DTOOLDVERSION=\"${common.to_old_version}\"
#-DENABLE_HEAP_DEBUGGING
-DASYNCWEBSERVER_REGEX
#-DCORE_DEBUG_LEVEL=3
-DCONFIG_ARDUHAL_LOG_COLORS=1
#-DOTA_DEBUG=1
-DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-DBOOT_APP_PARTITION_OTA_0=1
# ===== AsyncTCP Optimierungen - KRITISCH für WiFi-Stabilität =====
# Core 1 = Arduino/App Core (nicht Core 0 = WiFi/Protocol Core!)
# Schwere Callbacks auf Core 0 stören das WiFi-Radio
-DCONFIG_ASYNC_TCP_RUNNING_CORE=1
# Längerer ACK-Timeout für instabile Verbindungen (10s statt 5s)
-DCONFIG_ASYNC_TCP_MAX_ACK_TIME=10000
# Größere Queue für mehr gleichzeitige Requests
-DCONFIG_ASYNC_TCP_QUEUE_SIZE=128
# Mehr Stack für komplexere Callbacks (8KB statt 16KB default, spart RAM)
-DCONFIG_ASYNC_TCP_STACK_SIZE=8192
# Standard-Priorität beibehalten
-DCONFIG_ASYNC_TCP_PRIORITY=10
# WDT aktivieren für Crash-Recovery (war deaktiviert!)
-DCONFIG_ASYNC_TCP_USE_WDT=1
# ===== LwIP Optimierungen für OTA-Uploads (1.5-2MB) =====
# Schnellere Socket-Freigabe (30s statt 60s TIME_WAIT)
-DCONFIG_LWIP_TCP_MSL=30000
# Größerer RX-Buffer für große Uploads (8KB statt 4KB)
-DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=8192
# Max aktive TCP-Verbindungen (unverändert)
-DCONFIG_LWIP_MAX_ACTIVE_TCP=16
extra_scripts =
scripts/extra_script.py
extra_scripts = scripts/extra_script.py
[platformio]
default_envs = esp32dev
default_envs =
esp32dev
esp32-s3-devkitc-1
[env]
build_flags =
-Os
-ffunction-sections
-fdata-sections
-mtext-section-literals
-DVERSION=\"${common.version}\"
-DTOOLDVERSION=\"${common.to_old_version}\"
-DASYNCWEBSERVER_REGEX
-DCONFIG_ARDUHAL_LOG_COLORS=1
-DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-DBOOT_APP_PARTITION_OTA_0=1
-DCONFIG_ASYNC_TCP_RUNNING_CORE=1
-DCONFIG_ASYNC_TCP_MAX_ACK_TIME=10000
-DCONFIG_ASYNC_TCP_QUEUE_SIZE=128
-DCONFIG_ASYNC_TCP_STACK_SIZE=8192
-DCONFIG_ASYNC_TCP_PRIORITY=10
# WDT für AsyncTCP deaktiviert: Mit aktivem WDT konnten langsame
# WebSocket-Sender (z. B. große ws.textAll-JSONs) den AsyncTCP-Task
# killen und so alle Clients abwerfen.
-DCONFIG_ASYNC_TCP_USE_WDT=0
-DCONFIG_LWIP_TCP_MSL=30000
-DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=8192
-DCONFIG_LWIP_MAX_ACTIVE_TCP=16
lib_deps =
tzapu/WiFiManager
https://github.com/me-no-dev/ESPAsyncWebServer.git#master
https://github.com/esphome/AsyncTCP.git
bogde/HX711 @ ^0.7.5
adafruit/Adafruit SSD1306 @ ^2.5.13
adafruit/Adafruit GFX Library @ ^1.11.11
adafruit/Adafruit PN532 @ ^1.3.3
bblanchon/ArduinoJson @ ^7.3.0
knolleary/PubSubClient @ ^2.8
digitaldragon/SSLClient @ ^1.3.2
monitor_speed = 115200
[env:esp32-s3-devkitc-1]
board = esp32-s3-devkitc-1
framework = arduino
extra_scripts = scripts/extra_script.py
upload_protocol = esptool
board_build.flash_mode = dio
platform = espressif32
board_build.filesystem = littlefs
board_build.partitions = partitions.csv
board_upload.flash_size = 8MB
+71 -1
View File
@@ -208,6 +208,25 @@ bool sendRfidResult(String tagUuid, int spoolId, int locationId, bool success, S
return (httpCode == 200);
}
bool sendTagData(String tagJson) {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(10000);
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/tag-data");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
doc["tag_json"] = tagJson;
String payload;
serializeJson(doc, payload);
int httpCode = http.POST(payload);
http.end();
Serial.printf("sendTagData: HTTP %d\n", httpCode);
return (httpCode == 200);
}
void filamanApiTask(void* pvParameters) {
for (;;) {
ApiRequest req;
@@ -228,10 +247,21 @@ void filamanApiTask(void* pvParameters) {
if (hasReq) {
filamanApiState = API_TRANSMITTING;
switch (req.type) {
case API_REQUEST_HEARTBEAT: sendHeartbeatWithRetry(2); break; // Mit Retry-Logik
case API_REQUEST_REGISTER: {
// URL übernehmen und persistieren, dann blockierend
// registrieren - hier unkritisch, da eigener Task.
if (req.str2.length() > 0) filamanUrl = req.str2;
saveFilamanConfig();
bool ok = registerDevice(req.str1);
Serial.printf("registerDevice: %s\n", ok ? "success" : "failed");
sendRegisterResult(ok);
break;
}
case API_REQUEST_HEARTBEAT: sendHeartbeatWithRetry(2); break;
case API_REQUEST_WEIGHT: sendWeight(req.id1, req.str1, req.val); break;
case API_REQUEST_LOCATE: sendLocation(req.id1, req.str1, req.id2, req.str2); break;
case API_REQUEST_RFID_RESULT: sendRfidResult(req.str1, req.id1, req.id2, req.bool1, req.str3, req.remainingWeight); break;
case API_REQUEST_TAG_DATA: sendTagData(req.str1); break;
default: break;
}
filamanApiState = API_IDLE;
@@ -240,6 +270,29 @@ void filamanApiTask(void* pvParameters) {
}
}
// Reiht die Registrierung ein, statt sie im AsyncTCP-Kontext auszuführen.
// str2 = FilaMan-URL, str1 = Device-Code.
bool registerDeviceAsync(const String& url, const String& deviceCode) {
bool queued = false;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
for(int i=0; i<MAX_API_QUEUE; i++) if(!apiQueue[i].active) {
apiQueue[i].type = API_REQUEST_REGISTER;
apiQueue[i].id1 = 0;
apiQueue[i].id2 = 0;
apiQueue[i].str1 = deviceCode;
apiQueue[i].str2 = url;
apiQueue[i].val = 0.0f;
apiQueue[i].active = true;
queued = true;
break;
}
xSemaphoreGive(queueMutex);
}
// Ohne Queue-Platz kaeme nie ein "registerResult" - der Aufrufer muss
// dem Frontend dann sofort einen Fehler zurueckgeben.
return queued;
}
void sendHeartbeatAsync() {
if (!checkFilamanRegistration()) return;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
@@ -323,6 +376,23 @@ void sendRfidResultAsync(String tagUuid, int spoolId, int locationId, bool succe
}
}
void sendTagDataAsync(String tagJson) {
if (!checkFilamanRegistration()) return;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
for(int i=0; i<MAX_API_QUEUE; i++) if(!apiQueue[i].active) {
apiQueue[i].type = API_REQUEST_TAG_DATA;
apiQueue[i].str1 = tagJson;
apiQueue[i].id1 = 0;
apiQueue[i].id2 = 0;
apiQueue[i].str2 = "";
apiQueue[i].val = 0.0f;
apiQueue[i].active = true;
break;
}
xSemaphoreGive(queueMutex);
}
}
bool initFilaman() {
oledShowProgressBar(3, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_API_INIT));
loadFilamanConfig();
+4 -1
View File
@@ -17,7 +17,8 @@ typedef enum {
API_REQUEST_HEARTBEAT,
API_REQUEST_WEIGHT,
API_REQUEST_LOCATE,
API_REQUEST_RFID_RESULT
API_REQUEST_RFID_RESULT,
API_REQUEST_TAG_DATA
} FilamanApiRequestType;
extern volatile filamanApiStateType filamanApiState;
@@ -26,10 +27,12 @@ extern bool filamanConnected;
// FilaMan API functions
bool initFilaman();
bool registerDevice(const String& deviceCode);
bool registerDeviceAsync(const String& url, const String& deviceCode);
void sendHeartbeatAsync();
void sendWeightAsync(int spoolId, String tagUuid, float weight);
void sendLocationAsync(int spoolId, String spoolTagUuid, int locationId, String locationTagUuid);
void sendRfidResultAsync(String tagUuid, int spoolId, int locationId, bool success, String errorMessage, float remainingWeight = 0);
void sendTagDataAsync(String tagJson);
// Internal blocking functions (used by async task)
bool sendHeartbeat();
+25 -2
View File
@@ -6,21 +6,38 @@
//#define PN532_MOSI 23
//#define PN532_SS 5
//#define PN532_MISO 19
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t PN532_IRQ = 15;
const uint8_t PN532_RESET = 16;
#else
const uint8_t PN532_IRQ = 32;
const uint8_t PN532_RESET = 33;
#endif
// ***** PN532
// ***** HX711 (Waage)
// HX711 circuit wiring
const uint8_t LOADCELL_DOUT_PIN = 16; //16;
const uint8_t LOADCELL_SCK_PIN = 17; //17;
// ACHTUNG ESP32-S3: GPIO19/20 sind die nativen USB-Leitungen (D-/D+) und liegen auf
// dem DevKitC-1 an der "USB"-Buchse. Der HX711 wird dort unzuverlaessig erkannt.
// Pins hier nur zusammen mit den Tabellen in README.md / README.de.md aendern.
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t LOADCELL_DOUT_PIN = 5;
const uint8_t LOADCELL_SCK_PIN = 6;
#else
const uint8_t LOADCELL_DOUT_PIN = 16;
const uint8_t LOADCELL_SCK_PIN = 17;
#endif
const uint8_t calVal_eepromAdress = 0;
const uint16_t SCALE_LEVEL_WEIGHT = 500;
// ***** HX711
// ***** TTP223 (Touch Sensor)
// TTP223 circuit wiring
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t TTP223_PIN = 7;
#else
const uint8_t TTP223_PIN = 25;
#endif
// ***** TTP223
@@ -46,6 +63,12 @@ bool filamanRegistered = false;
uint16_t oledSleepTimeout = 60; // Default 60 seconds (0 = disabled)
// ***** Display Sleep
// ***** WiFi
// Sendeleistung in 0.1 dBm. Default 19.5dBm = Maximum; nur senken, wenn der AP
// das Geraet rauswirft (reason=2/4) oder es direkt neben dem AP steht.
int16_t wifiTxPowerDeciDbm = 195;
// ***** WiFi
// ***** Task Prios
uint8_t rfidTaskCore = 1;
uint8_t rfidTaskPrio = 1;
+5 -1
View File
@@ -15,6 +15,7 @@
#define NVS_NAMESPACE_SETTINGS "settings"
#define NVS_KEY_LANGUAGE "language"
#define NVS_KEY_OLED_SLEEP "oled_sleep"
#define NVS_KEY_WIFI_TXPOWER "wifi_txpwr"
#define SCALE_DEFAULT_CALIBRATION_VALUE 430.0f;
#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)
@@ -25,7 +26,7 @@
#define SCREEN_PROGRESS_BAR_HEIGHT 12U
#define DISPLAY_BOOT_TEXT "FilaMan"
#define WIFI_CHECK_INTERVAL 60000U
#define WIFI_CHECK_INTERVAL 15000U
#define DISPLAY_UPDATE_INTERVAL 1000U
#define FILAMAN_HEARTBEAT_INTERVAL 60000U
@@ -74,4 +75,7 @@ extern uint8_t scaleTaskPrio;
extern uint16_t defaultScaleCalibrationValue;
extern uint16_t oledSleepTimeout;
// WLAN-Sendeleistung in 0.1 dBm (195 = 19.5dBm). Siehe txPowerFromDeciDbm() in wlan.cpp.
extern int16_t wifiTxPowerDeciDbm;
#endif
+46 -38
View File
@@ -199,9 +199,17 @@ void loop() {
mainTaskWasPaused = true;
}
// Während eines expliziten Scan-Requests darf kein regulärer Wiegevorgang
// an das Backend gesendet werden.
if (scanRequestActive) {
weightCounterToApi = 0;
weightSend = 0;
lastWeight = weight;
}
// Wenn Timer abgelaufen und nicht gerade ein RFID-Tag geschrieben wird
if (currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState < NFC_WRITING)
if (!scanRequestActive && currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState < NFC_WRITING)
{
lastWeightReadTime = currentMillis;
@@ -226,51 +234,51 @@ void loop() {
weightSend = 0;
}
lastWeight = weight;
lastWeight = weight;
// Wenn ein Tag erkannt wurde und das Gewicht stabil ist (4+ seconds), an FilaMan senden
if (weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Wenn ein Tag erkannt wurde und das Gewicht stabil ist (4+ seconds), an FilaMan senden
if (!scanRequestActive && weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Check if it's a Bambu tag - if so, send only UUID without spoolId
if (isBambuTag) {
sendWeightAsync(0, activeTagUuid, weight);
Serial.println("Bambu weight queued for FilaMan (UUID only)");
} else {
// Normal NTAG: send spoolId + UUID
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
Serial.println("Weight queued for FilaMan");
}
weightSend = 1;
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_SPOOL_TAG), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
}
// Handle successful tag write
if (nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Only send weight if a valid spoolId exists (spool tag, not location tag)
if (activeSpoolId.length() > 0 && activeSpoolId != "0") {
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
// Check if it's a Bambu tag - if so, send only UUID without spoolId
if (isBambuTag) {
sendWeightAsync(0, activeTagUuid, weight);
Serial.println("Bambu weight queued for FilaMan (UUID only)");
} else {
// Normal NTAG: send spoolId + UUID
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
Serial.println("Weight queued for FilaMan");
}
weightSend = 1;
Serial.println("Weight queued for FilaMan after spool tag write");
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_TAG_WRITTEN), tr(STR_SENDING));
oledShowProgressBar(3, 4, tr(STR_SPOOL_TAG), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
} else {
// Location tag written - no weight to send
Serial.println("Location tag written successfully - no weight send needed");
}
// Handle successful tag write
if (!scanRequestActive && nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Only send weight if a valid spoolId exists (spool tag, not location tag)
if (activeSpoolId.length() > 0 && activeSpoolId != "0") {
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
weightSend = 1;
Serial.println("Weight queued for FilaMan after spool tag write");
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_TAG_WRITTEN), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
} else {
// Location tag written - no weight to send
Serial.println("Location tag written successfully - no weight send needed");
}
}
}
}
}
esp_task_wdt_reset();
}
+171 -51
View File
@@ -13,6 +13,17 @@
//Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, PN532_SS);
Adafruit_PN532 nfc(PN532_IRQ, PN532_RESET);
// Adafruit_PN532::begin() toggles RSTPDN too briefly (~1ms/2ms) for some PN532
// modules to reliably leave powerdown, which then makes getFirmwareVersion()
// return 0 right after begin(). Pulse it explicitly with more margin first.
static void pulsePn532Reset() {
pinMode(PN532_RESET, OUTPUT);
digitalWrite(PN532_RESET, LOW);
delay(50);
digitalWrite(PN532_RESET, HIGH);
delay(200);
}
TaskHandle_t RfidReaderTask;
// AsyncWebServerRequest* volatile activeNfcWriteRequest = nullptr; // Removed
SemaphoreHandle_t nfcRequestMutex = NULL;
@@ -27,6 +38,35 @@ bool isBambuTag = false;
volatile bool nfcReadingTaskSuspendRequest = false;
volatile bool nfcReadingTaskSuspendState = false;
volatile bool nfcWriteInProgress = false; // Prevent any tag operations during write
volatile bool scanRequestActive = false; // Set by website when frontend requests a tag scan
unsigned long scanRequestStartedAtMs = 0;
const unsigned long SCAN_REQUEST_TIMEOUT_MS = 30000;
void sendScanRequestErrorToBackend(const char* errorMessage) {
if (!scanRequestActive) {
return;
}
JsonDocument doc;
doc["scan_status"] = "error";
doc["error_message"] = errorMessage;
doc["source"] = "rfid_scan_request";
String payload;
serializeJson(doc, payload);
sendTagDataAsync(payload);
scanRequestActive = false;
scanRequestStartedAtMs = 0;
}
void setScanRequest(bool active) {
scanRequestActive = active;
if (active) {
scanRequestStartedAtMs = millis();
} else {
scanRequestStartedAtMs = 0;
}
}
volatile nfcReaderStateType nfcReaderState = NFC_IDLE;
// 0 = nicht gelesen
@@ -532,6 +572,7 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
Serial.println("1. Neuinitialisierung des PN532...");
// Reinitialize the PN532
pulsePn532Reset();
nfc.begin();
vTaskDelay(pdMS_TO_TICKS(500)); // Give it time to initialize
@@ -1315,12 +1356,19 @@ bool decodeNdefAndReturnJson(const byte* encodedMessage, String uidString) {
{
if(filamanConnected){
Serial.println("JSON-Dokument erfolgreich verarbeitet");
if (doc["sm_id"].is<String>() && doc["sm_id"] != "" && doc["sm_id"] != "0")
String idKey = doc["spool_id"].is<String>() ? "spool_id" : "sm_id";
if (doc[idKey].is<String>() && doc[idKey] != "" && doc[idKey] != "0")
{
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), tr(STR_WEIGHING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
activeSpoolId = doc["sm_id"].as<String>();
lastSpoolId = activeSpoolId;
if (scanRequestActive) {
scanRequestActive = false;
sendTagDataAsync(nfcJsonData);
tagProcessed = true;
} else {
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), tr(STR_WEIGHING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
activeSpoolId = doc[idKey].as<String>();
lastSpoolId = activeSpoolId;
}
}
else if(doc["location_id"].is<int>())
@@ -1350,6 +1398,27 @@ bool decodeNdefAndReturnJson(const byte* encodedMessage, String uidString) {
tagProcessed = true;
activeSpoolId = "";
}
else if (doc["protocol"].is<String>() &&
(doc["protocol"].as<String>() == "openspool" ||
doc["protocol"].as<String>() == "filaman"))
{
// Tag mit erweitertem Protokoll (OpenSpool/FilaMan) aber ohne spool_id/sm_id.
// FilaMan sucht die Spule anhand der tag_uuid (rfid_uid).
String protocolStr = doc["protocol"].as<String>();
String type = doc["type"] | "?";
String brand = doc["brand"] | "";
String displayText = brand.length() > 0 ? (brand + " " + type) : type;
Serial.println("Extended-data tag: protocol=" + protocolStr + " type=" + type + " brand=" + brand);
activeSpoolId = ""; // Keine spool_id/sm_id → Gewicht wird mit tag_uuid gesendet
if (scanRequestActive) {
scanRequestActive = false;
sendTagDataAsync(nfcJsonData);
tagProcessed = true;
} else {
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), displayText.c_str());
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
}
}
else
{
Serial.println("Unbekannter Tag-Inhalt.");
@@ -1433,7 +1502,7 @@ bool quickSpoolIdCheck(String uidString) {
return false;
}
Serial.println("=== FAST-PATH: Quick sm_id Check ===");
Serial.println("=== FAST-PATH: Quick spool_id Check ===");
// Read enough pages to cover NDEF header + beginning of payload (pages 4-8 = 20 bytes)
uint8_t ndefData[20];
@@ -1542,17 +1611,23 @@ bool quickSpoolIdCheck(String uidString) {
Serial.print("JSON start from extended read: ");
Serial.println(jsonStart);
// Check for sm_id pattern - look for non-zero sm_id values
if (jsonStart.indexOf("\"sm_id\":\"") >= 0) {
int smIdStart = jsonStart.indexOf("\"sm_id\":\"") + 9;
// Check for spool_id/sm_id pattern - look for non-zero id values
String idPattern = "\"spool_id\":\"";
int idPatternPos = jsonStart.indexOf(idPattern);
if (idPatternPos < 0) {
idPattern = "\"sm_id\":\"";
idPatternPos = jsonStart.indexOf(idPattern);
}
if (idPatternPos >= 0) {
int smIdStart = idPatternPos + idPattern.length();
int smIdEnd = jsonStart.indexOf("\"", smIdStart);
if (smIdEnd > smIdStart && smIdEnd < jsonStart.length()) {
String quickSpoolId = jsonStart.substring(smIdStart, smIdEnd);
Serial.print("Found sm_id in extended read: ");
Serial.print("Found spool_id/sm_id in extended read: ");
Serial.println(quickSpoolId);
// Only process if sm_id is not "0" (known spool)
// Only process if id is not "0" (known spool)
if (quickSpoolId != "0" && quickSpoolId.length() > 0) {
Serial.println("✓ FAST-PATH: Known spool detected!");
@@ -1573,13 +1648,13 @@ bool quickSpoolIdCheck(String uidString) {
Serial.println("✓ FAST-PATH SUCCESS: Known spool processed quickly");
return true;
} else {
Serial.println("✗ FAST-PATH: sm_id is 0 - new brand filament, need full read");
Serial.println("✗ FAST-PATH: spool_id/sm_id is 0 - new brand filament, need full read");
return false;
}
}
}
Serial.println("✗ FAST-PATH: No sm_id pattern in extended read");
Serial.println("✗ FAST-PATH: No spool_id/sm_id pattern in extended read");
return false;
}
@@ -1595,20 +1670,26 @@ bool quickSpoolIdCheck(String uidString) {
Serial.print("Quick JSON data: ");
Serial.println(quickJson);
// Look for sm_id pattern in the beginning of JSON - check for known vs new spools
if (quickJson.indexOf("\"sm_id\":\"") >= 0) {
Serial.println("✓ FAST-PATH: sm_id field found");
// Look for spool_id/sm_id pattern in the beginning of JSON - check for known vs new spools
String idPattern2 = "\"spool_id\":\"";
int idPattern2Pos = quickJson.indexOf(idPattern2);
if (idPattern2Pos < 0) {
idPattern2 = "\"sm_id\":\"";
idPattern2Pos = quickJson.indexOf(idPattern2);
}
if (idPattern2Pos >= 0) {
Serial.println("✓ FAST-PATH: spool_id/sm_id field found");
// Extract sm_id from quick data
int smIdStart = quickJson.indexOf("\"sm_id\":\"") + 9;
// Extract id from quick data
int smIdStart = idPattern2Pos + idPattern2.length();
int smIdEnd = quickJson.indexOf("\"", smIdStart);
if (smIdEnd > smIdStart && smIdEnd < quickJson.length()) {
String quickSpoolId = quickJson.substring(smIdStart, smIdEnd);
Serial.print("✓ Quick extracted sm_id: ");
Serial.print("✓ Quick extracted spool_id/sm_id: ");
Serial.println(quickSpoolId);
// Only process known spools (sm_id != "0") via fast path
// Only process known spools (id != "0") via fast path
if (quickSpoolId != "0" && quickSpoolId.length() > 0) {
Serial.println("✓ FAST-PATH: Known spool detected!");
@@ -1629,12 +1710,12 @@ bool quickSpoolIdCheck(String uidString) {
Serial.println("✓ FAST-PATH SUCCESS: Known spool processed quickly");
return true;
} else {
Serial.println("✗ FAST-PATH: sm_id is 0 - new brand filament, need full read");
return false; // sm_id="0" means new brand filament, needs full processing
Serial.println("✗ FAST-PATH: spool_id/sm_id is 0 - new brand filament, need full read");
return false; // id="0" means new brand filament, needs full processing
}
} else {
Serial.println("✗ FAST-PATH: Could not extract complete sm_id value");
return false; // Need full read to get complete sm_id
Serial.println("✗ FAST-PATH: Could not extract complete spool_id/sm_id value");
return false; // Need full read to get complete id
}
}
@@ -1885,7 +1966,7 @@ void writeJsonToTag(void *parameter) {
vTaskDelete(NULL);
}
// Ensures sm_id is always the first key in JSON for fast-path detection
// Ensures spool_id is always the first key in JSON for fast-path detection
String optimizeJsonForFastPath(const char* payload) {
JsonDocument inputDoc;
DeserializationError error = deserializeJson(inputDoc, payload);
@@ -1896,26 +1977,26 @@ String optimizeJsonForFastPath(const char* payload) {
return String(payload); // Return original if parsing fails
}
// Create optimized JSON with sm_id first
// Create optimized JSON with spool_id first
JsonDocument optimizedDoc;
// Always add sm_id first (even if it's "0" for brand filaments)
// Also convert spool_id to sm_id if present (backend may send either)
if (inputDoc["sm_id"].is<String>() && inputDoc["sm_id"].as<String>() != "0" && inputDoc["sm_id"].as<String>() != "") {
optimizedDoc["sm_id"] = inputDoc["sm_id"].as<String>();
Serial.print("Optimizing JSON: sm_id found = ");
Serial.println(inputDoc["sm_id"].as<String>());
} else if (inputDoc["spool_id"].is<int>() && inputDoc["spool_id"].as<int>() > 0) {
optimizedDoc["sm_id"] = String(inputDoc["spool_id"].as<int>());
Serial.print("Optimizing JSON: Converted spool_id to sm_id = ");
// Always add spool_id first (even if it's "0" for brand filaments)
// Accept legacy sm_id as input too, but always emit spool_id
if (inputDoc["spool_id"].is<int>() && inputDoc["spool_id"].as<int>() > 0) {
optimizedDoc["spool_id"] = String(inputDoc["spool_id"].as<int>());
Serial.print("Optimizing JSON: spool_id found = ");
Serial.println(inputDoc["spool_id"].as<int>());
} else if (inputDoc["spool_id"].is<String>() && inputDoc["spool_id"].as<String>() != "0" && inputDoc["spool_id"].as<String>() != "") {
optimizedDoc["sm_id"] = inputDoc["spool_id"].as<String>();
Serial.print("Optimizing JSON: Converted spool_id (string) to sm_id = ");
optimizedDoc["spool_id"] = inputDoc["spool_id"].as<String>();
Serial.print("Optimizing JSON: spool_id found = ");
Serial.println(inputDoc["spool_id"].as<String>());
} else if (inputDoc["sm_id"].is<String>() && inputDoc["sm_id"].as<String>() != "0" && inputDoc["sm_id"].as<String>() != "") {
optimizedDoc["spool_id"] = inputDoc["sm_id"].as<String>();
Serial.print("Optimizing JSON: Converted legacy sm_id to spool_id = ");
Serial.println(inputDoc["sm_id"].as<String>());
} else {
optimizedDoc["sm_id"] = "0"; // Default for brand filaments
Serial.println("Optimizing JSON: No sm_id or spool_id found, setting sm_id to '0'");
optimizedDoc["spool_id"] = "0"; // Default for brand filaments
Serial.println("Optimizing JSON: No spool_id or sm_id found, setting spool_id to '0'");
}
for (JsonPair kv : inputDoc.as<JsonObject>()) {
@@ -1949,7 +2030,7 @@ void startWriteJsonToTag(const bool isSpoolTag, const char* payload, int spoolId
return;
}
// Optimize JSON to ensure sm_id is first key for fast-path detection
// Optimize JSON to ensure spool_id is first key for fast-path detection
String optimizedPayload = optimizeJsonForFastPath(payload);
NfcWriteParameterType* parameters = new NfcWriteParameterType();
@@ -2029,6 +2110,11 @@ void scanRfidTask(void * parameter) {
esp_task_wdt_reset();
yield();
if (scanRequestActive && scanRequestStartedAtMs > 0 && (millis() - scanRequestStartedAtMs) > SCAN_REQUEST_TIMEOUT_MS) {
Serial.println("RFID scan-request timeout reached without tag");
sendScanRequestErrorToBackend("Timeout - no tag found");
}
// Skip scanning during write operations, but keep NFC interface active
if (nfcReaderState != NFC_WRITING && !nfcWriteInProgress && !nfcReadingTaskSuspendRequest && !booting)
{
@@ -2081,7 +2167,8 @@ void scanRfidTask(void * parameter) {
{
activeTagUuid = uidString;
// Try fast-path detection first for known spools
if (quickSpoolIdCheck(uidString)) {
// Skip fast-path when a scan request is active — full NDEF read needed to send tag data
if (!scanRequestActive && quickSpoolIdCheck(uidString)) {
Serial.println("✓ FAST-PATH: Tag processed quickly, skipping full read");
// Set reader back to idle for next scan
nfcReaderState = NFC_READ_SUCCESS;
@@ -2157,16 +2244,48 @@ void scanRfidTask(void * parameter) {
}
else
{
// UID length != 7, might be a Mifare Classic (Bambu tags)
Serial.println("Not a standard NTAG (UID length != 7), trying Bambu Lab tag...");
if (!detectBambuTag(uid, uidLength)) {
//TBD: Show error here?!
oledShowProgressBar(1, 1, tr(STR_FAILURE), tr(STR_UNKNOWN_TAG_TYPE));
oledSetPriority(DISPLAY_PRIORITY_WARNING, 2000);
Serial.println("This doesn't seem to be an NTAG2xx tag (UUID length != 7 bytes)!");
// Reset activeSpoolId when tag type is unknown to prevent autoSet
activeSpoolId = "";
Serial.println("Unknown tag type - activeSpoolId reset to prevent autoSet");
// UID length != 7 — could be Mifare Classic (BambuLab) or non-standard NTAG.
// Try NTAG-style NDEF read first to check for openspool/filaman protocol.
Serial.println("UID length != 7, checking for openspool/filaman protocol first...");
activeTagUuid = uidString;
bool handledAsNdef = false;
uint16_t tagSize = readTagSize();
if (tagSize > 0)
{
uint8_t* data = (uint8_t*)malloc(tagSize);
memset(data, 0, tagSize);
uint8_t numPages = tagSize / 4;
for (uint8_t i = 4; i < 4 + numPages; i++) {
if (!robustPageRead(i, data + (i - 4) * 4)) {
Serial.printf("Page %d read failed, stopping\n", i);
break;
}
if (data[(i - 4) * 4] == 0xFE) {
Serial.println("Found NDEF end marker");
break;
}
yield();
esp_task_wdt_reset();
vTaskDelay(pdMS_TO_TICKS(2));
}
if (decodeNdefAndReturnJson(data, uidString)) {
handledAsNdef = true;
nfcReaderState = NFC_READ_SUCCESS;
}
free(data);
}
if (!handledAsNdef)
{
Serial.println("No NDEF/openspool protocol found, trying Bambu Lab tag...");
if (!detectBambuTag(uid, uidLength)) {
oledShowProgressBar(1, 1, tr(STR_FAILURE), tr(STR_UNKNOWN_TAG_TYPE));
oledSetPriority(DISPLAY_PRIORITY_WARNING, 2000);
Serial.println("This doesn't seem to be an NTAG2xx tag (UUID length != 7 bytes)!");
activeSpoolId = "";
Serial.println("Unknown tag type - activeSpoolId reset to prevent autoSet");
}
}
}
}
@@ -2228,6 +2347,7 @@ void scanRfidTask(void * parameter) {
void startNfc() {
nfcRequestMutex = xSemaphoreCreateMutex();
oledShowProgressBar(4, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_NFC_INIT));
pulsePn532Reset();
nfc.begin(); // Beginne Kommunikation mit RFID Leser
delay(1000);
+2
View File
@@ -28,6 +28,7 @@ void scanRfidTask(void * parameter);
void startWriteJsonToTag(const bool isSpoolTag, const char* payload, int spoolId = 0, int locationId = 0);
bool quickSpoolIdCheck(String uidString);
bool readCompleteJsonForFastPath(); // Read complete JSON data for fast-path web interface display
void setScanRequest(bool active);
extern TaskHandle_t RfidReaderTask;
extern String nfcJsonData;
@@ -36,6 +37,7 @@ extern String activeTagUuid;
extern String lastSpoolId;
extern volatile nfcReaderStateType nfcReaderState;
extern volatile bool nfcWriteInProgress;
extern volatile bool scanRequestActive;
extern bool tagProcessed;
extern bool isBambuTag;
+1 -1
View File
@@ -261,7 +261,7 @@ bool deepSearchScale() {
// without pull-up resistor (10k) on LOADCELL_DOUT_PIN the hx711 lib functions
// are not reliable in detecting a missing chip
// these tests work even without pull-up resistor
const uint32_t timeout = 1000;
const uint32_t timeout = 1000; // 1 second timeout for waiting for the chip to respond
const int samples = 10;
pinMode(LOADCELL_DOUT_PIN, INPUT);
+50 -5
View File
@@ -12,6 +12,7 @@
#include "config.h"
#include "debug.h"
#include "lang.h"
#include "wlan.h"
#ifndef VERSION
#define VERSION "1.2.0"
@@ -105,6 +106,12 @@ void sendWriteResult(AsyncWebSocketClient *client, uint8_t success) {
if (client) client->text(response); else ws.textAll(response);
}
// Ergebnis der asynchronen Geräte-Registrierung. Der HTTP-Request ist zu diesem
// Zeitpunkt längst beantwortet (202), das Frontend wartet auf diese WS-Nachricht.
void sendRegisterResult(bool success) {
ws.textAll("{\"type\":\"registerResult\",\"success\":" + String(success ? "true" : "false") + "}");
}
void foundNfcTag(AsyncWebSocketClient *client, uint8_t success) {
if (success == lastSuccess && client == nullptr) return;
ws.textAll("{\"type\":\"nfcTag\", \"payload\":{\"found\": " + String(success) + "}}");
@@ -189,12 +196,16 @@ void setupWebserver(AsyncWebServer &server) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid JSON\"}");
return;
}
if (doc["url"].is<String>()) filamanUrl = doc["url"].as<String>();
saveFilamanConfig();
if (registerDevice(doc["code"].as<String>())) {
request->send(200, "application/json", "{\"success\": true}");
// WICHTIG: registerDevice() macht einen blockierenden HTTPClient-Call
// (5s Timeout). Direkt hier aufgerufen friert das den AsyncTCP-Task ein
// und reisst alle laufenden HTTP-/WebSocket-Verbindungen ab. Daher nur
// einreihen und sofort antworten; das Ergebnis kommt per WebSocket
// ("registerResult") vom filamanApiTask.
String url = doc["url"].is<String>() ? doc["url"].as<String>() : String("");
if (registerDeviceAsync(url, doc["code"].as<String>())) {
request->send(202, "application/json", "{\"success\": true, \"pending\": true}");
} else {
request->send(400, "application/json", "{\"success\": false}");
request->send(503, "application/json", "{\"success\": false, \"error\": \"API queue full\"}");
}
});
@@ -285,6 +296,40 @@ void setupWebserver(AsyncWebServer &server) {
request->send(200, "application/json", "{\"success\": true}");
});
// WiFi TX Power API (Wert in 0.1 dBm, z.B. 195 = 19.5dBm)
server.on("/api/wifi-power", HTTP_GET, [](AsyncWebServerRequest *request){
JsonDocument doc;
doc["txPower"] = wifiTxPowerDeciDbm;
String response;
serializeJson(doc, response);
request->send(200, "application/json", response);
});
server.on("/api/wifi-power", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
JsonDocument doc;
DeserializationError error = deserializeJson(doc, (const uint8_t*)data, len);
if (error) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid JSON\"}");
return;
}
if (!doc["txPower"].is<int>()) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Missing txPower\"}");
return;
}
int16_t txPower = (int16_t)doc["txPower"].as<int>();
if (!isValidTxPowerDeciDbm(txPower)) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid txPower\"}");
return;
}
saveWifiTxPower(txPower);
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/api/v1/rfid/scan-request", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
setScanRequest(true);
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/reboot", HTTP_GET, [](AsyncWebServerRequest *request){
request->send(200, "text/plain", "Rebooting...");
delay(500);
+1
View File
@@ -26,5 +26,6 @@ void sendAmsData(AsyncWebSocketClient *client);
void sendNfcData();
void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);
void sendWriteResult(AsyncWebSocketClient *client, uint8_t success);
void sendRegisterResult(bool success);
#endif
+121 -31
View File
@@ -7,26 +7,124 @@
#include "display.h"
#include "config.h"
#include "lang.h"
#include <Preferences.h>
WiFiManager wm;
bool wm_nonblocking = false;
uint8_t wifiErrorCounter = 0;
// Erlaubte Stufen in 0.1 dBm. Der ESP32-Treiber kennt nur diese festen Werte;
// alles andere fällt auf das Maximum (19.5dBm) zurück.
wifi_power_t txPowerFromDeciDbm(int16_t deciDbm) {
switch (deciDbm) {
case 85: return WIFI_POWER_8_5dBm;
case 110: return WIFI_POWER_11dBm;
case 130: return WIFI_POWER_13dBm;
case 150: return WIFI_POWER_15dBm;
case 170: return WIFI_POWER_17dBm;
case 195: return WIFI_POWER_19_5dBm;
default: return WIFI_POWER_19_5dBm;
}
}
bool isValidTxPowerDeciDbm(int16_t deciDbm) {
return deciDbm == 85 || deciDbm == 110 || deciDbm == 130 ||
deciDbm == 150 || deciDbm == 170 || deciDbm == 195;
}
void loadWifiTxPower() {
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, true);
int16_t stored = preferences.getShort(NVS_KEY_WIFI_TXPOWER, 195);
preferences.end();
wifiTxPowerDeciDbm = isValidTxPowerDeciDbm(stored) ? stored : 195;
Serial.print("WiFi TX power loaded: ");
Serial.print(wifiTxPowerDeciDbm / 10.0, 1);
Serial.println(" dBm");
}
void saveWifiTxPower(int16_t deciDbm) {
if (!isValidTxPowerDeciDbm(deciDbm)) return;
wifiTxPowerDeciDbm = deciDbm;
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, false);
preferences.putShort(NVS_KEY_WIFI_TXPOWER, deciDbm);
preferences.end();
// Sofort anwenden, ein Neustart ist nicht noetig.
WiFi.setTxPower(txPowerFromDeciDbm(deciDbm));
}
void wifiSettings() {
// Standard WiFi-Einstellungen für höchste Stabilität mit ESPAsyncWebServer
WiFi.mode(WIFI_STA);
WiFi.setHostname("FilaMan");
// ESP32-Core Auto-Reconnect aktivieren (unabhängig vom WiFiManager-Flag).
// Sorgt dafür, dass der WiFi-Stack autonom direkt nach einem Disconnect
// neu verbindet, ohne auf das 15s-Polling in checkWiFiConnection() warten zu müssen.
WiFi.setAutoReconnect(true);
WiFi.persistent(true);
// KRITISCH: Power-Save deaktivieren für stabilen Webserver-Betrieb
// Ohne dies geht WiFi in Modem-Sleep und verpasst Requests/Responses
// Dies ist die Hauptursache für Verbindungsabbrüche bei regelmäßigen API-Calls
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
// Angemessene Sendeleistung (reduziert Hitzeprobleme)
WiFi.setTxPower(WIFI_POWER_17dBm);
// Sendeleistung, einstellbar unter Setup (Default 19.5dBm = Maximum).
// 17dBm war früher ein Kompromiss gegen Hitzeprobleme, führte bei marginalem
// Empfang aber zu AP-seitigen Auth-/Assoc-Kicks (reason=2/4/9/202). Umgekehrt
// kann volle Leistung direkt neben dem AP dessen Empfaenger uebersteuern -
// dann hilft ein niedrigerer Wert (beim ESP32-S3 z.B. 8.5dBm).
loadWifiTxPower();
WiFi.setTxPower(txPowerFromDeciDbm(wifiTxPowerDeciDbm));
// Aktiviere WiFi-Roaming für bessere Stabilität bei schwachem Signal
esp_wifi_set_rssi_threshold(-80);
// Hinweis: Kein esp_wifi_set_rssi_threshold() mehr.
// Der vorherige Wert (-80 dBm) löste in Single-AP-Heimnetzen häufige
// Disconnects aus, sobald das Signal in den normalen Wohnungs-Empfangsbereich
// fiel. Ohne Mesh-/Roaming-Setup bringt der Threshold keinen Vorteil.
}
// Reagiert sofort auf Verbindungsverlust, statt bis zum nächsten
// checkWiFiConnection()-Tick zu warten. Das ESP32-Auto-Reconnect übernimmt
// die eigentliche Wiederherstellung; hier nur Logging + Display-Update.
void onWiFiEvent(WiFiEvent_t event, WiFiEventInfo_t info) {
switch (event) {
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED: {
// BSSID/RSSI mitloggen: wechselt die BSSID zwischen den Reconnects,
// pendelt das Gerät zwischen zwei APs (Mesh/Repeater) - dann kommen
// die Abbrüche vom Roaming, nicht vom Webserver.
const uint8_t *bssid = info.wifi_sta_disconnected.bssid;
Serial.printf("WiFi event: STA_DISCONNECTED, reason=%u, "
"bssid=%02X:%02X:%02X:%02X:%02X:%02X, rssi=%d\n",
info.wifi_sta_disconnected.reason,
bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5],
WiFi.RSSI());
if (wifiOn) {
wifiOn = false;
oledShowTopRow();
}
break;
}
case ARDUINO_EVENT_WIFI_STA_GOT_IP:
Serial.printf("WiFi event: STA_GOT_IP %s, bssid=%s, rssi=%d, ch=%d\n",
WiFi.localIP().toString().c_str(),
WiFi.BSSIDstr().c_str(),
WiFi.RSSI(),
WiFi.channel());
wifiOn = true;
wifiErrorCounter = 0;
// Power-Save nach Reconnect erneut deaktivieren (wird vom Stack
// gelegentlich zurückgesetzt).
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
// Gleiches gilt für die Sendeleistung: nach einem Reconnect erneut setzen.
WiFi.setTxPower(txPowerFromDeciDbm(wifiTxPowerDeciDbm));
oledShowTopRow();
break;
default:
break;
}
}
void configModeCallback (WiFiManager *myWiFiManager) {
@@ -39,6 +137,10 @@ void initWiFi() {
// load Wifi settings
wifiSettings();
// WiFi-Events abonnieren, bevor autoConnect() läuft, damit auch frühe
// Disconnects/Reconnects schon erfasst werden.
WiFi.onEvent(onWiFiEvent);
wm.setAPCallback(configModeCallback);
wm.setSaveConfigCallback([]() {
@@ -48,7 +150,10 @@ void initWiFi() {
if(wm_nonblocking) wm.setConfigPortalBlocking(false);
//wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
wm.setWiFiAutoReconnect(true);
// WiFiManager-Reconnect deaktiviert: der ESP32-Stack übernimmt das via
// setAutoReconnect(true). Zwei parallele Reconnect-Mechanismen erzeugen
// sonst einen Verbindungssturm, der den Router zu AUTH_EXPIRE-Kicks verleitet.
wm.setWiFiAutoReconnect(false);
wm.setConnectTimeout(10);
oledShowProgressBar(1, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_WIFI_INIT));
@@ -75,39 +180,24 @@ void initWiFi() {
void checkWiFiConnection() {
if (WiFi.status() != WL_CONNECTED)
{
if (wifiOn) {
Serial.println("WiFi connection lost. Attempting active reconnect...");
wifiOn = false;
oledShowTopRow();
oledDisplayText(tr(STR_WIFI_RECONNECTING));
// Aktiver Reconnect-Versuch statt nur auf LwIP auto-reconnect zu warten
WiFi.reconnect();
}
// setAutoReconnect(true) übernimmt die Wiederverbindung automatisch.
// Hier nur Display-Update und Fehler zählen für den Neustart-Watchdog.
oledDisplayText(tr(STR_WIFI_RECONNECTING));
wifiErrorCounter++;
// Only restart after a significant time of no connection (e.g. 5 minutes)
// Assuming WIFI_CHECK_INTERVAL is 60000ms (1 minute), 5 errors = 5 minutes
if (wifiErrorCounter >= 5)
// Nach ca. 5 Minuten ohne Verbindung Neustart (bei WIFI_CHECK_INTERVAL
// = 15s entspricht das 20 Fehlern).
const uint8_t maxErrors = (uint8_t)(300000UL / WIFI_CHECK_INTERVAL);
if (wifiErrorCounter >= maxErrors)
{
Serial.println("WiFi unable to reconnect for 5 minutes. Restarting...");
Serial.println("WiFi unable to reconnect for ~5 minutes. Restarting...");
ESP.restart();
}
}
else
{
if (!wifiOn) {
Serial.println("WiFi reconnected successfully.");
wifiErrorCounter = 0;
wifiOn = true;
oledShowTopRow();
// Power-Save erneut deaktivieren nach Reconnect (wird manchmal zurückgesetzt)
esp_wifi_set_ps(WIFI_PS_NONE);
} else {
// Reset error counter if we are connected (just to be safe)
wifiErrorCounter = 0;
}
// Connected: Fehlerzähler zurücksetzen. wifiOn wird vom GOT_IP-Event
// gepflegt, daher hier nichts weiter zu tun.
wifiErrorCounter = 0;
}
}
+5
View File
@@ -6,4 +6,9 @@
void initWiFi();
void checkWiFiConnection();
// Sendeleistung in 0.1 dBm (85/110/130/150/170/195). Ungueltige Werte werden ignoriert.
bool isValidTxPowerDeciDbm(int16_t deciDbm);
void loadWifiTxPower();
void saveWifiTxPower(int16_t deciDbm);
#endif