Compare commits

...
88 Commits
Author SHA1 Message Date
ManuelW cb3d3952b0 Merge pull request #30 from anderl1969/fix/main-loop-indentation
style: fix indentation in main loop
2026-10-03 11:54:16 +02:00
anderl1969 3662422c1c style: fix indentation in main loop 2026-09-30 16:23:45 +02:00
ManuelW77 a04cc37190 docs: update platformio.ini for version v3.4.9 2026-09-20 13:44:05 +02:00
ManuelW 7e6854cd8a Merge pull request #28 from Fire-Devils/feature/wifi-txpower-setting
Make WiFi TX power configurable, document ESP32-S3 pins
2026-09-20 12:46:54 +02:00
ManuelW77andClaude Opus 5 a5ba8a901a Make WiFi TX power configurable, document ESP32-S3 pins
The transmit power was hardcoded to 19.5 dBm. Some setups need a lower
value (device right next to the AP, weak 3.3V rail), so it is now a user
setting instead of a per-chip constant.

- wlan.cpp: load/save/apply TX power (0.1 dBm steps, NVS key wifi_txpwr,
  default 195), re-applied on GOT_IP so it survives a reconnect
- website.cpp: /api/wifi-power GET/POST with validation
- setup.html: "WiFi Settings" card
- README.md/README.de.md: pin table gets an ESP32-S3 column plus a warning
  that GPIO19/20 are the native USB data lines
- config.cpp: same warning next to the HX711 pin definitions

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-20 12:42:13 +02:00
ManuelW b8cfa1ce98 Merge pull request #27 from KollegeChris/main
Optimizations for ESP32S3
2026-09-20 12:40:37 +02:00
Christoph Stoiber 884c8bcf8f Comment adjusted for ESP32-S3 2026-09-18 13:09:31 +02:00
Christoph Stoiber 502c1d6ab8 Restore wlan power 2026-09-18 13:05:00 +02:00
Christoph Stoiber 3e995faa8c Changed HX711 Pins 2026-09-18 12:06:50 +02:00
Christoph Stoiber 4b93362dd7 Improved for ESP32S3 2026-09-17 18:07:53 +02:00
ManuelW 9a1d394bc8 Merge pull request #26 from anderl1969/doc/printfileslite
Doc/printfileslite
2026-08-27 13:47:02 +02:00
anderl1969 fab9fdae87 Add readme for FilaMan Lite with version details
Added details about low and high version casing dimensions and NFC connection issues.
2026-08-25 09:10:10 +02:00
anderl1969 1939c1b57f Add print files section to english NFC-only mode documentation
Added section for print files with STL links.
2026-08-25 09:01:58 +02:00
anderl1969 026cbd5179 Fix link to STL files in NFC-only mode documentation 2026-08-25 09:00:40 +02:00
anderl1969 15c66af948 Add Druck-Dateien section to NFC-only mode documentation
Added section for print files and STL resources.
2026-08-25 08:53:55 +02:00
anderl1969 8b746b204a added STLs for FilaMan Lite case (without scale) 2026-08-25 08:49:04 +02:00
ManuelW77 5241969c57 docs: update platformio.ini for version v3.4.8 2026-08-21 16:45:42 +02:00
ManuelW77 80825c6cfc fix(net): unblock AsyncTCP during device registration, max TX power, roaming diagnostics
Three independent improvements to the WiFi/webserver stability:

1. /api/register called registerDevice() directly inside the AsyncWebServer
   body handler. That function does a blocking HTTPClient POST with a 5s
   timeout, freezing the AsyncTCP task and tearing down every in-flight HTTP
   and WebSocket connection. It now goes through the existing apiQueue /
   filamanApiTask machinery: the endpoint answers 202 immediately (or 503 if
   the queue is full, which would otherwise leave the UI waiting forever) and
   the outcome is pushed to the browser as a "registerResult" WebSocket
   message. setup.html waits for that message instead of the HTTP response.

2. TX power raised from 17dBm to the 19.5dBm maximum. The reduced setting was
   a compromise against heat, but at marginal signal levels it invites
   AP-side auth/assoc kicks (reason=2/4/9/202).

3. Disconnect/GOT_IP logging now includes BSSID, RSSI and channel, so a device
   bouncing between two APs (mesh/repeater with separate DHCP scopes) can be
   told apart from webserver-induced drops.

Both build environments verified.
2026-08-21 16:43:00 +02:00
ManuelW77andRaul Santamaria 337d7f8983 fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 16:32:07 +02:00
ManuelW77 6749022243 docs: update platformio.ini for version v3.4.7 2026-08-21 16:13:49 +02:00
ManuelW77 1da123a01f Revert "fix(nfc): pulse PN532 RSTPDN before begin()"
This reverts commit 27e16c3d1b.
2026-08-21 16:11:13 +02:00
ManuelW77 028fe85586 docs: update platformio.ini for version v3.4.6 2026-08-21 15:50:02 +02:00
ManuelW77andRaul Santamaria 27e16c3d1b fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 15:48:52 +02:00
ManuelW77 6f9c99edb6 fix(config): restore ESP32 Dev Board pin numbers, gate S3 pins behind CONFIG_IDF_TARGET_ESP32S3
PR #14 (0f43f22) unconditionally replaced the classic ESP32 Dev Board
pin numbers for PN532 (NFC), HX711 (scale) and TTP223 (touch) with the
ESP32-S3 values in the single shared src/config.cpp, even though the
esp32dev build environment (used for all standard-hardware releases)
still links against it unchanged. This caused nfc.begin() to talk to
the wrong physical pins on ESP32 Dev Board hardware, producing a
watchdog reset during NFC init and a subsequent bootloop.

Verified via objdump on both compiled config.cpp.o that esp32dev now
resolves to 32/33/16/17/25 and esp32-s3-devkitc-1 to 15/16/19/20/7.
2026-08-21 15:46:04 +02:00
ManuelW77 a7b97dc0c9 docs: update platformio.ini for version v3.4.5 2026-08-21 15:12:12 +02:00
ManuelW77 2bae0369fa docs: update platformio.ini for version v3.4.4 2026-08-20 12:43:04 +02:00
ManuelW77 1c3aae5f49 update: increment version to 3.4.3 in platformio.ini 2026-08-20 12:42:57 +02:00
ManuelW77 4054a96067 merge: sync devel with main
devel was 16 commits behind main and had diverged with the
esp32-s3-devkitc-1 board support (PR #14) that never made it back to
main. Merges main into devel so both stay on the same feature/fix
baseline; resolves the platformio.ini conflict by keeping devel's
shared [env] section (used by both esp32dev and esp32-s3-devkitc-1)
and carrying forward main's AsyncTCP watchdog fix
(-DCONFIG_ASYNC_TCP_USE_WDT=0).
2026-08-20 09:32:41 +02:00
ManuelW77 f6b6df55c8 docs: update platformio.ini for version v3.4.2 2026-08-12 10:18:20 +02:00
ManuelW77 f3426119e8 fix: update JSON handling to support spool_id and sm_id interchangeably 2026-08-12 10:14:35 +02:00
Manuel Weiser dd508e2e1e fix: update release flow 2026-08-09 16:04:09 +02:00
Manuel Weiser 0ab3db5f2d update version 2026-08-09 15:37:24 +02:00
Manuel Weiser f86d71f8b2 docs: update platformio.ini for beta version v3.4.0-beta1 2026-05-28 19:43:01 +02:00
Manuel Weiser b2ac1e9fcd Merge branch 'devel' 2026-05-28 19:42:53 +02:00
Manuel Weiser f2c1d44f5a chore: update version to 3.4.0 in platformio.ini 2026-05-28 19:42:15 +02:00
Manuel Weiser 3c9a0f17ba docs: update platformio.ini for beta version v3.3.2-beta1 2026-05-28 19:37:26 +02:00
Manuel Weiser 6a9acb9d27 feat: implement scan request handling with timeout and error reporting 2026-05-28 18:58:10 +02:00
Manuel Weiser 9b93d219f9 fix: skip fast-path detection for known spools when a scan request is active 2026-05-28 18:26:08 +02:00
Manuel Weiser f3f51cd6f8 fix: disable WiFiManager auto-reconnect to prevent connection storms 2026-05-28 17:48:42 +02:00
Manuel Weiser 9d3a3411fb feat: enhance RFID tag detection with NDEF support and improved error handling 2026-05-28 17:31:35 +02:00
Manuel Weiser 775700f90f feat: add tag data handling and scan request functionality 2026-05-28 17:04:24 +02:00
Manuel Weiser 9456e6ab91 feat: add support for extended-data tags with OpenSpool/FilaMan protocol 2026-05-28 16:28:13 +02:00
Manuel Weiser 30409a59e0 docs: update platformio.ini for version v3.3.2 2026-05-25 08:29:56 +02:00
Manuel Weiser 17f86a0094 feat: add package-lock.json and update WiFi settings for improved stability 2026-05-25 08:29:26 +02:00
ManuelW 0d38728072 Merge pull request #14 from KollegeChris/esp32-s3
Added configuration for esp32-s3
2026-05-19 11:09:07 +02:00
Christoph Stoiber 0f43f228e7 Added configuration for esp32-s3 2026-05-05 21:20:57 +02:00
ManuelW eb1c032444 Merge pull request #12 from anderl1969/feature/hw-detection
Documentation for NFC-only mode
2026-04-06 16:21:04 +02:00
anderl1969 696b8ba518 docs: German and English documentation for the NFC-only mode 2026-03-30 15:05:23 +02:00
anderl1969 728c40f0fa docs: images for NFC-only mode 2026-03-30 00:13:12 +02:00
anderl1969 d0d2dbb274 init NFC-only mode documentation
Added convenience note about using a small device for NFC-tag writing.
2026-03-30 00:10:55 +02:00
Manuel Weiser 4a377b25e0 fix: update version to 3.3.1 in platformio.ini 2026-03-29 19:51:37 +02:00
ManuelW 075459b890 Merge pull request #10 from anderl1969/feature/hw-detection
Feature/hw detection
2026-03-29 18:25:27 +02:00
anderl1969 bece16f012 feat: added boot text that informs about entering NFC mode w/o hx711 2026-03-29 17:04:57 +02:00
anderl1969 14fa6e7fd0 feat: added top-row icon for scale state 2026-03-29 16:28:19 +02:00
anderl1969 4daa74bbfb feat: NFC-only mode based on working hw detection for hx711 2026-03-29 15:54:54 +02:00
anderl1969 4b74bc8988 fix: added missing boot entries in stringTable 2026-03-29 14:49:28 +02:00
anderl1969 f09e552e3d chore: cleanup progress bar during setup 2026-03-29 13:56:29 +02:00
Manuel Weiser 6de2e8728c docs: update version in platformio.ini to 3.3.0 2026-03-29 10:55:53 +02:00
Manuel Weiser 60f08ea640 docs: update platformio.ini to version 3.2.8 and adjust old version reference 2026-03-29 10:48:04 +02:00
Manuel Weiser 7fdfc79a2a docs: update platformio.ini for beta version v3.2.7-beta1 2026-03-29 10:45:39 +02:00
Manuel Weiser 894d1d25dd Merge branch 'devel' 2026-03-29 10:45:29 +02:00
Manuel Weiser a3dd4b164e feat: implement template processor for dynamic HTML variable replacement and optimize static asset serving with caching 2026-03-29 10:44:22 +02:00
Manuel Weiser 0f8d3d470d feat: enhance WiFi stability and performance with async TCP optimizations and heartbeat retry logic 2026-03-29 10:13:46 +02:00
Manuel Weiser 20ab21dae5 docs: update platformio.ini for version v3.2.7 2026-03-29 09:34:49 +02:00
ManuelW a14ab8fa55 Merge pull request #9 from paultbarrett/main
feat: add OLED sleep settings and management to save the display from burn-in and pinned espressif32 version
2026-03-29 09:30:34 +02:00
Paul Barrett 96a5e184dd feat: add OLED sleep settings and management to save the display from burn-in 2026-03-29 12:34:32 +11:00
Manuel Weiser bc0d586c9e Merge branch 'main' into devel 2026-03-28 12:44:08 +01:00
Manuel Weiser ddf981b971 fix: rename rfid_uid to tag_uuid in sendWeight and sendRfidResult functions 2026-03-15 21:04:25 +01:00
Manuel Weiser 1b7a71b617 fix: rename tag_uuid to rfid_uid in sendWeight and sendRfidResult functions 2026-03-15 21:00:07 +01:00
Manuel Weiser 87a0403735 docs: update platformio.ini for version v3.2.6 2026-03-13 14:01:42 +01:00
Manuel Weiser 97a2ecca41 Merge branch 'devel' 2026-03-13 14:00:43 +01:00
Manuel Weiser fe768cf631 feat: enhance JSON optimization by converting spool_id to sm_id and improve write task handling 2026-03-13 13:51:21 +01:00
Manuel Weiser 60af915c9f docs: update platformio.ini for version v3.2.5 2026-03-09 19:25:41 +01:00
Manuel Weiser 4d318bf4ec fix: change weight parameter type to int16_t in oledShowWeight function 2026-03-09 19:25:01 +01:00
Manuel Weiser 9311162463 Add multilingual support with language selection and translation strings
- Introduced language management with English and German translations.
- Added language settings to NVS for persistent storage.
- Updated display functions to use translated strings for various messages.
- Implemented API endpoints for language retrieval and setting.
- Refactored existing text strings in the codebase to utilize the new translation system.
2026-03-09 19:18:59 +01:00
Manuel Weiser 067807d1a6 docs: update platformio.ini for version v3.2.4 2026-03-09 17:08:28 +01:00
Manuel Weiser 04bf05cb05 Merge branch 'devel' 2026-03-09 17:06:41 +01:00
Manuel Weiser 045e450744 feat: add feedback display and clear lastSpoolId after setting location 2026-03-09 17:06:06 +01:00
Manuel Weiser 7b03b359ba feat: enhance tag detection with countdown display during write operation 2026-03-09 16:51:46 +01:00
Manuel Weiser a5d9902149 fix: update registration success message and change reboot to page reload 2026-03-09 16:25:44 +01:00
Manuel Weiser 1c19413970 feat: add documentation rules and project paths; implement display priority management in code 2026-03-09 16:18:41 +01:00
Manuel Weiser 35e0167398 docs: update platformio.ini for beta version v3.2.3-beta1 2026-03-09 08:14:42 +01:00
Manuel Weiser 89f176b188 docs: update platformio.ini for version v3.2.3 2026-03-09 07:42:15 +01:00
Manuel Weiser b78f34c1d3 feat: enhance deployment process with SSH support for Gitea and remove FTP integration from GitHub release 2026-03-09 07:41:47 +01:00
Manuel Weiser f9d8fc7a61 docs: update platformio.ini for version v3.2.2 2026-03-08 20:18:35 +01:00
Manuel Weiser c77b9c8503 Merge branch 'devel' 2026-03-08 20:17:58 +01:00
Manuel Weiser 1096585b56 fix: ensure UID strings are zero-padded for consistent formatting in Bambu tag detection 2026-03-08 20:17:23 +01:00
Manuel Weiser 17ba353f17 docs: update platformio.ini for version v3.2.1 2026-02-21 20:41:05 +01:00
44 changed files with 2941 additions and 916 deletions

No files matched your search

+40
View File
@@ -6,6 +6,18 @@ on:
GITEA_TOKEN:
description: 'Token für Gitea API-Zugriff'
required: true
FILAMAN_SSH_PRIVATE_KEY:
description: 'SSH Private Key für Deployment'
required: true
FILAMAN_SSH_HOST:
description: 'SSH Host für Deployment'
required: true
FILAMAN_SSH_USER:
description: 'SSH User für Deployment'
required: true
FILAMAN_SSH_FIRMWARE_PATH:
description: 'SSH Pfad für Firmware Upload'
required: true
outputs:
version:
@@ -212,3 +224,31 @@ jobs:
fi
fi
done
- name: SSH-Deploy Firmware
if: success()
env:
SSH_PRIVATE_KEY: ${{ secrets.FILAMAN_SSH_PRIVATE_KEY }}
SSH_HOST: ${{ secrets.FILAMAN_SSH_HOST }}
SSH_USER: ${{ secrets.FILAMAN_SSH_USER }}
SSH_PATH: ${{ secrets.FILAMAN_SSH_FIRMWARE_PATH }}
VERSION: ${{ steps.get_version.outputs.VERSION }}
run: |
set -euo pipefail
# SSH-Key einrichten
mkdir -p ~/.ssh
echo "$SSH_PRIVATE_KEY" > ~/.ssh/id_rsa
chmod 600 ~/.ssh/id_rsa
ssh-keyscan -H "$SSH_HOST" >> ~/.ssh/known_hosts 2>/dev/null
cd .pio/build/esp32dev
# Full-Binary per SCP hochladen
echo "📤 Upload filaman_full_${VERSION}.bin per SCP ..."
scp -o StrictHostKeyChecking=no "filaman_full_${VERSION}.bin" "${SSH_USER}@${SSH_HOST}:${SSH_PATH}/filaman_full.bin"
echo "✅ filaman_full.bin auf ${SSH_HOST}:${SSH_PATH}/ hochgeladen."
# Aufräumen
rm -f ~/.ssh/id_rsa
-35
View File
@@ -6,15 +6,6 @@ on:
RELEASE_TOKEN:
description: 'GitHub token for release creation'
required: true
FTP_PASSWORD:
description: 'FTP Password'
required: false
FTP_USER:
description: 'FTP User'
required: false
FTP_HOST:
description: 'FTP Host'
required: false
permissions:
contents: write
@@ -160,29 +151,3 @@ jobs:
echo "Error: No files found to upload"
exit 1
fi
- name: Install lftp
run: sudo apt-get install -y lftp
- name: Upload Firmware via FTP
if: success()
env:
FTP_PASSWORD: ${{ secrets.FTP_PASSWORD }}
FTP_USER: ${{ secrets.FTP_USER }}
FTP_HOST: ${{ secrets.FTP_HOST }}
VERSION: ${{ steps.get_version.outputs.VERSION }}
run: |
cd .pio/build/esp32dev
if [ -n "$FTP_USER" ] && [ -n "$FTP_PASSWORD" ] && [ -n "$FTP_HOST" ]; then
echo "All FTP credentials are present, attempting upload..."
lftp -c "set ssl:verify-certificate no; \
set ftp:ssl-protect-data true; \
set ftp:ssl-force true; \
set ssl:check-hostname false; \
set ftp:ssl-auth TLS; \
open -u $FTP_USER,$FTP_PASSWORD $FTP_HOST; \
put -O / filaman_full_${VERSION}.bin -o filaman_full.bin"
else
echo "Error: Some FTP credentials are missing"
exit 1
fi
+6 -5
View File
@@ -32,13 +32,14 @@ jobs:
uses: ./.github/workflows/github-release.yml
secrets:
RELEASE_TOKEN: ${{ secrets.GITHUB_TOKEN }}
FTP_PASSWORD: ${{ secrets.FTP_PASSWORD }}
FTP_USER: ${{ secrets.FTP_USER }}
FTP_HOST: ${{ secrets.FTP_HOST }}
gitea-release:
needs: detect-provider
if: needs.detect-provider.outputs.provider == 'gitea'
if: needs.detect-provider.outputs.provider == 'gitea' && !contains(github.ref_name, '-beta')
uses: ./.github/workflows/gitea-release.yml
secrets:
GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
FILAMAN_SSH_PRIVATE_KEY: ${{ secrets.FILAMAN_SSH_PRIVATE_KEY }}
FILAMAN_SSH_HOST: ${{ secrets.FILAMAN_SSH_HOST }}
FILAMAN_SSH_USER: ${{ secrets.FILAMAN_SSH_USER }}
FILAMAN_SSH_FIRMWARE_PATH: ${{ secrets.FILAMAN_SSH_FIRMWARE_PATH }}
@@ -0,0 +1,9 @@
# Dokumentations-Regeln für Code-Projekte
## Handbuch und Dokumentation
Achte bitte darauf, dass du mit der aktualisierung von openmemory auch die Dokumentation und Endanwender-Handbuch
mit aktualisierst, wenn es neue Funktionen für Nutzer gibt.
- path for documentation and user manual: ~/dev/FilaMan/FilaMan-System-docu/
## Readme
Halte bitte außerdem auch die Readme Files im Repo aktuell.
+5
View File
@@ -0,0 +1,5 @@
# Nutzung von MCP Servern
### Nutze bitte möglichst immer die bereitgestellten MCP Server.
- Um die Codebasis zu erforschen, nutze jcodemunch-mcp
- Für Coding an sich, nutze context7
@@ -0,0 +1,44 @@
**# OpenMemory Rules for Code Projects**
- Use the OpenMemory/Memory tools whenever possible to store and retrieve important project knowledge.
- search openmemory before you inspect folders and files
- Goal: decisions, code changes, and bug fixes should be saved in a way that they can be reused in new sessions.
**## When Something Should Be Stored**
- **After every major code change**
- Create a brief memory note with:
- Affected files/modules
- What was changed?
- Why was it changed? (goal / requirements)
- Potential risks or TODOs
- **For every decision** (API design, architecture, important trade‑offs)
- Create a memory note of type “Decision” with:
- Context / problem
- Considered options
- Chosen option
- Justification
- **For every bug fix**
- Create a memory note of type “Bugfix” with:
- Symptom / error picture (e.g., error message)
- Cause
- Fix (which files/lines)
- What to note for the future
**## How Memories Should Be Structured**
- Use consistent project tags, e.g., `project:my-project`.
- Use type tags like `type:decision`, `type:change`, `type:bugfix`.
- If possible, link commits or exact file paths / line numbers in the note.
**## Usage in New Sessions or Tasks**
- At the start of a new session or task:
- Load the most important OpenMemory entries for the current project (e.g., last decisions, relevant bug fixes).
- Create a short overview for yourself before new suggestions are made.
- If a new error occurs:
- First check OpenMemory for previous similar errors, relevant changes or decisions before re‑analyzing the code or making a new decision.
**# Git Rules**
- **NEVER** push independently to a git repository/branch!
+14
View File
@@ -0,0 +1,14 @@
# rules for the FilaMan project
## path
- path for project: ~/dev/FilaMan/FilaMan-System-opencode
- path for project documentation and user manuel: ~/dev/FilaMan/FilaMan-System-docu
- path for Bambulab Local-Communication Plugin: ~/dev/FilaMan/FilaMan-BambuLab-Plugin
- path for BambuLab Cloud-Communication Plugin: ~/dev/FilaMan/FilaMan-BambuLabCloud-Plugin
- path for SpoolmanDB Impoft Plugin: ~/Users/manuel~/dev/FilaMan/FilaMan-SpoolmanDB-Plugin
- path for SpoolmanAPI Plugin: ~/Users/manuel~/dev/FilaMan/FilaMan-SpoolmanAPI-Plugin
## User Version Info: changelog.json
- File: frontend/src/changelog.json
- Inhalt: eine Userfreundeliche Information über Neuerungen, Änderungen oder Entfernte Funktionen für den User. Keine technischen Details oder ähnliches, Kurz und pregnant.
- Als Platzhalter für die Version wird "UNRELEASED" genutzt. Dieser wird beim bump im Workflow ersetzt.
+380
View File
@@ -0,0 +1,380 @@
{
"name": ".opencode",
"lockfileVersion": 3,
"requires": true,
"packages": {
"": {
"dependencies": {
"@opencode-ai/plugin": "1.15.10"
}
},
"node_modules/@msgpackr-extract/msgpackr-extract-darwin-arm64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-darwin-arm64/-/msgpackr-extract-darwin-arm64-3.0.3.tgz",
"integrity": "sha512-QZHtlVgbAdy2zAqNA9Gu1UpIuI8Xvsd1v8ic6B2pZmeFnFcMWiPLfWXh7TVw4eGEZ/C9TH281KwhVoeQUKbyjw==",
"cpu": [
"arm64"
],
"license": "MIT",
"optional": true,
"os": [
"darwin"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-darwin-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-darwin-x64/-/msgpackr-extract-darwin-x64-3.0.3.tgz",
"integrity": "sha512-mdzd3AVzYKuUmiWOQ8GNhl64/IoFGol569zNRdkLReh6LRLHOXxU4U8eq0JwaD8iFHdVGqSy4IjFL4reoWCDFw==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"darwin"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-arm": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-arm/-/msgpackr-extract-linux-arm-3.0.3.tgz",
"integrity": "sha512-fg0uy/dG/nZEXfYilKoRe7yALaNmHoYeIoJuJ7KJ+YyU2bvY8vPv27f7UKhGRpY6euFYqEVhxCFZgAUNQBM3nw==",
"cpu": [
"arm"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-arm64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-arm64/-/msgpackr-extract-linux-arm64-3.0.3.tgz",
"integrity": "sha512-YxQL+ax0XqBJDZiKimS2XQaf+2wDGVa1enVRGzEvLLVFeqa5kx2bWbtcSXgsxjQB7nRqqIGFIcLteF/sHeVtQg==",
"cpu": [
"arm64"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-linux-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-linux-x64/-/msgpackr-extract-linux-x64-3.0.3.tgz",
"integrity": "sha512-cvwNfbP07pKUfq1uH+S6KJ7dT9K8WOE4ZiAcsrSes+UY55E/0jLYc+vq+DO7jlmqRb5zAggExKm0H7O/CBaesg==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"linux"
]
},
"node_modules/@msgpackr-extract/msgpackr-extract-win32-x64": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/@msgpackr-extract/msgpackr-extract-win32-x64/-/msgpackr-extract-win32-x64-3.0.3.tgz",
"integrity": "sha512-x0fWaQtYp4E6sktbsdAqnehxDgEc/VwM7uLsRCYWaiGu0ykYdZPiS8zCWdnjHwyiumousxfBm4SO31eXqwEZhQ==",
"cpu": [
"x64"
],
"license": "MIT",
"optional": true,
"os": [
"win32"
]
},
"node_modules/@opencode-ai/plugin": {
"version": "1.15.10",
"resolved": "https://registry.npmjs.org/@opencode-ai/plugin/-/plugin-1.15.10.tgz",
"integrity": "sha512-V2p7CvpBtKWB+FID7Dl1y0Ci02zUT40A9b2RD9R9BOiuD8ZcKhHWov+irN0xVJA0Eg6OhEBfA0lPKRn1FNKPlw==",
"license": "MIT",
"dependencies": {
"@opencode-ai/sdk": "1.15.10",
"effect": "4.0.0-beta.66",
"zod": "4.1.8"
},
"peerDependencies": {
"@opentui/core": ">=0.2.15",
"@opentui/keymap": ">=0.2.15",
"@opentui/solid": ">=0.2.15"
},
"peerDependenciesMeta": {
"@opentui/core": {
"optional": true
},
"@opentui/keymap": {
"optional": true
},
"@opentui/solid": {
"optional": true
}
}
},
"node_modules/@opencode-ai/sdk": {
"version": "1.15.10",
"resolved": "https://registry.npmjs.org/@opencode-ai/sdk/-/sdk-1.15.10.tgz",
"integrity": "sha512-CUhpmMGGOqzvPnNNjjWmEIodAfP6Qnuki2ChIUKWYF7UImZ4zUcMZnzO5BtUxu/Ni1P8qzWxDioXs+7aIZQEhA==",
"license": "MIT",
"dependencies": {
"cross-spawn": "7.0.6"
}
},
"node_modules/@standard-schema/spec": {
"version": "1.1.0",
"resolved": "https://registry.npmjs.org/@standard-schema/spec/-/spec-1.1.0.tgz",
"integrity": "sha512-l2aFy5jALhniG5HgqrD6jXLi/rUWrKvqN/qJx6yoJsgKhblVd+iqqU4RCXavm/jPityDo5TCvKMnpjKnOriy0w==",
"license": "MIT"
},
"node_modules/cross-spawn": {
"version": "7.0.6",
"resolved": "https://registry.npmjs.org/cross-spawn/-/cross-spawn-7.0.6.tgz",
"integrity": "sha512-uV2QOWP2nWzsy2aMp8aRibhi9dlzF5Hgh5SHaB9OiTGEyDTiJJyx0uy51QXdyWbtAHNua4XJzUKca3OzKUd3vA==",
"license": "MIT",
"dependencies": {
"path-key": "^3.1.0",
"shebang-command": "^2.0.0",
"which": "^2.0.1"
},
"engines": {
"node": ">= 8"
}
},
"node_modules/detect-libc": {
"version": "2.1.2",
"resolved": "https://registry.npmjs.org/detect-libc/-/detect-libc-2.1.2.tgz",
"integrity": "sha512-Btj2BOOO83o3WyH59e8MgXsxEQVcarkUOpEYrubB0urwnN10yQ364rsiByU11nZlqWYZm05i/of7io4mzihBtQ==",
"license": "Apache-2.0",
"optional": true,
"engines": {
"node": ">=8"
}
},
"node_modules/effect": {
"version": "4.0.0-beta.66",
"resolved": "https://registry.npmjs.org/effect/-/effect-4.0.0-beta.66.tgz",
"integrity": "sha512-4arEr62cziFa8BBVDUwJCJJmaVepXf/kRg7KtC0h8+bufngscrHbwWFhr9c+HonwOF+31U3iD3xUJmw9KzX7Dw==",
"license": "MIT",
"dependencies": {
"@standard-schema/spec": "^1.1.0",
"fast-check": "^4.6.0",
"find-my-way-ts": "^0.1.6",
"ini": "^6.0.0",
"kubernetes-types": "^1.30.0",
"msgpackr": "^1.11.9",
"multipasta": "^0.2.7",
"toml": "^4.1.1",
"uuid": "^13.0.0",
"yaml": "^2.8.3"
}
},
"node_modules/fast-check": {
"version": "4.8.0",
"resolved": "https://registry.npmjs.org/fast-check/-/fast-check-4.8.0.tgz",
"integrity": "sha512-GOJ158CUMnN6cSahsv4+ExARvIDuzzinFjkp0E9WtiBa5zcVeLozVkWaE4IzFcc+Y48Wp1EDlUZsXRyAztQcSg==",
"funding": [
{
"type": "individual",
"url": "https://github.com/sponsors/dubzzz"
},
{
"type": "opencollective",
"url": "https://opencollective.com/fast-check"
}
],
"license": "MIT",
"dependencies": {
"pure-rand": "^8.0.0"
},
"engines": {
"node": ">=12.17.0"
}
},
"node_modules/find-my-way-ts": {
"version": "0.1.6",
"resolved": "https://registry.npmjs.org/find-my-way-ts/-/find-my-way-ts-0.1.6.tgz",
"integrity": "sha512-a85L9ZoXtNAey3Y6Z+eBWW658kO/MwR7zIafkIUPUMf3isZG0NCs2pjW2wtjxAKuJPxMAsHUIP4ZPGv0o5gyTA==",
"license": "MIT"
},
"node_modules/ini": {
"version": "6.0.0",
"resolved": "https://registry.npmjs.org/ini/-/ini-6.0.0.tgz",
"integrity": "sha512-IBTdIkzZNOpqm7q3dRqJvMaldXjDHWkEDfrwGEQTs5eaQMWV+djAhR+wahyNNMAa+qpbDUhBMVt4ZKNwpPm7xQ==",
"license": "ISC",
"engines": {
"node": "^20.17.0 || >=22.9.0"
}
},
"node_modules/isexe": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/isexe/-/isexe-2.0.0.tgz",
"integrity": "sha512-RHxMLp9lnKHGHRng9QFhRCMbYAcVpn69smSGcq3f36xjgVVWThj4qqLbTLlq7Ssj8B+fIQ1EuCEGI2lKsyQeIw==",
"license": "ISC"
},
"node_modules/kubernetes-types": {
"version": "1.30.0",
"resolved": "https://registry.npmjs.org/kubernetes-types/-/kubernetes-types-1.30.0.tgz",
"integrity": "sha512-Dew1okvhM/SQcIa2rcgujNndZwU8VnSapDgdxlYoB84ZlpAD43U6KLAFqYo17ykSFGHNPrg0qry0bP+GJd9v7Q==",
"license": "Apache-2.0"
},
"node_modules/msgpackr": {
"version": "1.11.12",
"resolved": "https://registry.npmjs.org/msgpackr/-/msgpackr-1.11.12.tgz",
"integrity": "sha512-RBdJ1Un7yGlXWajrkxcSa93nvQ0w4zBf60c0yYv7YtBelP8H2FA7XsfBbMHtXKXUMUxH7zV3Zuozh+kUQWhHvg==",
"license": "MIT",
"optionalDependencies": {
"msgpackr-extract": "^3.0.2"
}
},
"node_modules/msgpackr-extract": {
"version": "3.0.3",
"resolved": "https://registry.npmjs.org/msgpackr-extract/-/msgpackr-extract-3.0.3.tgz",
"integrity": "sha512-P0efT1C9jIdVRefqjzOQ9Xml57zpOXnIuS+csaB4MdZbTdmGDLo8XhzBG1N7aO11gKDDkJvBLULeFTo46wwreA==",
"hasInstallScript": true,
"license": "MIT",
"optional": true,
"dependencies": {
"node-gyp-build-optional-packages": "5.2.2"
},
"bin": {
"download-msgpackr-prebuilds": "bin/download-prebuilds.js"
},
"optionalDependencies": {
"@msgpackr-extract/msgpackr-extract-darwin-arm64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-darwin-x64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-arm": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-arm64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-linux-x64": "3.0.3",
"@msgpackr-extract/msgpackr-extract-win32-x64": "3.0.3"
}
},
"node_modules/multipasta": {
"version": "0.2.7",
"resolved": "https://registry.npmjs.org/multipasta/-/multipasta-0.2.7.tgz",
"integrity": "sha512-KPA58d68KgGil15oDqXjkUBEBYc00XvbPj5/X+dyzeo/lWm9Nc25pQRlf1D+gv4OpK7NM0J1odrbu9JNNGvynA==",
"license": "MIT"
},
"node_modules/node-gyp-build-optional-packages": {
"version": "5.2.2",
"resolved": "https://registry.npmjs.org/node-gyp-build-optional-packages/-/node-gyp-build-optional-packages-5.2.2.tgz",
"integrity": "sha512-s+w+rBWnpTMwSFbaE0UXsRlg7hU4FjekKU4eyAih5T8nJuNZT1nNsskXpxmeqSK9UzkBl6UgRlnKc8hz8IEqOw==",
"license": "MIT",
"optional": true,
"dependencies": {
"detect-libc": "^2.0.1"
},
"bin": {
"node-gyp-build-optional-packages": "bin.js",
"node-gyp-build-optional-packages-optional": "optional.js",
"node-gyp-build-optional-packages-test": "build-test.js"
}
},
"node_modules/path-key": {
"version": "3.1.1",
"resolved": "https://registry.npmjs.org/path-key/-/path-key-3.1.1.tgz",
"integrity": "sha512-ojmeN0qd+y0jszEtoY48r0Peq5dwMEkIlCOu6Q5f41lfkswXuKtYrhgoTpLnyIcHm24Uhqx+5Tqm2InSwLhE6Q==",
"license": "MIT",
"engines": {
"node": ">=8"
}
},
"node_modules/pure-rand": {
"version": "8.4.0",
"resolved": "https://registry.npmjs.org/pure-rand/-/pure-rand-8.4.0.tgz",
"integrity": "sha512-IoM8YF/jY0hiugFo/wOWqfmarlE6J0wc6fDK1PhftMk7MGhVZl88sZimmqBBFomLOCSmcCCpsfj7wXASCpvK9A==",
"funding": [
{
"type": "individual",
"url": "https://github.com/sponsors/dubzzz"
},
{
"type": "opencollective",
"url": "https://opencollective.com/fast-check"
}
],
"license": "MIT"
},
"node_modules/shebang-command": {
"version": "2.0.0",
"resolved": "https://registry.npmjs.org/shebang-command/-/shebang-command-2.0.0.tgz",
"integrity": "sha512-kHxr2zZpYtdmrN1qDjrrX/Z1rR1kG8Dx+gkpK1G4eXmvXswmcE1hTWBWYUzlraYw1/yZp6YuDY77YtvbN0dmDA==",
"license": "MIT",
"dependencies": {
"shebang-regex": "^3.0.0"
},
"engines": {
"node": ">=8"
}
},
"node_modules/shebang-regex": {
"version": "3.0.0",
"resolved": "https://registry.npmjs.org/shebang-regex/-/shebang-regex-3.0.0.tgz",
"integrity": "sha512-7++dFhtcx3353uBaq8DDR4NuxBetBzC7ZQOhmTQInHEd6bSrXdiEyzCvG07Z44UYdLShWUyXt5M/yhz8ekcb1A==",
"license": "MIT",
"engines": {
"node": ">=8"
}
},
"node_modules/toml": {
"version": "4.1.1",
"resolved": "https://registry.npmjs.org/toml/-/toml-4.1.1.tgz",
"integrity": "sha512-EBJnVBr3dTXdA89WVFoAIPUqkBjxPMwRqsfuo1r240tKFHXv3zgca4+NJib/h6TyvGF7vOawz0jGuryJCdNHrw==",
"license": "MIT",
"engines": {
"node": ">=20"
}
},
"node_modules/uuid": {
"version": "13.0.2",
"resolved": "https://registry.npmjs.org/uuid/-/uuid-13.0.2.tgz",
"integrity": "sha512-vzi9uRZ926x4XV73S/4qQaTwPXM2JBj6/6lI/byHH1jOpCzb0zDbfytgA9LcN/hzb2l7WQSQnxITOVx5un/wGw==",
"funding": [
"https://github.com/sponsors/broofa",
"https://github.com/sponsors/ctavan"
],
"license": "MIT",
"bin": {
"uuid": "dist-node/bin/uuid"
}
},
"node_modules/which": {
"version": "2.0.2",
"resolved": "https://registry.npmjs.org/which/-/which-2.0.2.tgz",
"integrity": "sha512-BLI3Tl1TW3Pvl70l3yq3Y64i+awpwXqsGBYWkkqMtnbXgrMD+yj7rhW0kuEDxzJaYXGjEW5ogapKNMEKNMjibA==",
"license": "ISC",
"dependencies": {
"isexe": "^2.0.0"
},
"bin": {
"node-which": "bin/node-which"
},
"engines": {
"node": ">= 8"
}
},
"node_modules/yaml": {
"version": "2.9.0",
"resolved": "https://registry.npmjs.org/yaml/-/yaml-2.9.0.tgz",
"integrity": "sha512-2AvhNX3mb8zd6Zy7INTtSpl1F15HW6Wnqj0srWlkKLcpYl/gMIMJiyuGq2KeI2YFxUPjdlB+3Lc10seMLtL4cA==",
"license": "ISC",
"bin": {
"yaml": "bin.mjs"
},
"engines": {
"node": ">= 14.6"
},
"funding": {
"url": "https://github.com/sponsors/eemeli"
}
},
"node_modules/zod": {
"version": "4.1.8",
"license": "MIT",
"funding": {
"url": "https://github.com/sponsors/colinhacks"
}
}
}
}
+5
View File
@@ -0,0 +1,5 @@
# Agent rules
- sprich IMMER auf Deutsch mit mir!
- Please checkt .opencode/instructions/ for the project rules
- you have never to push to git by urself!
+28 -23
View File
@@ -2,17 +2,18 @@
⚠️ **Wichtig: Ab Version 3.0.0 erfordert dieses System das [FilaMan-System](https://github.com/Fire-Devils/filaman-system) Backend. Frühere direkte Integrationen (Spoolman, MQTT, Bambu Lab) wurden in das zentrale FilaMan-System verschoben.**
FilaMan ist ein Werkzeug zur Filamentverwaltung für den 3D-Druck. Es verwendet ESP32-Hardware zur Gewichtsmessung und Verwaltung von NFC-Tags.
Benutzer können Filamentspulen verwalten und das Gerät über eine Weboberfläche konfigurieren.
FilaMan ist ein Werkzeug zur Filamentverwaltung für den 3D-Druck. Es verwendet ESP32-Hardware zur Gewichtsmessung und Verwaltung von NFC-Tags.
Benutzer können Filamentspulen verwalten und das Gerät über eine Weboberfläche konfigurieren.
Das System integriert sich nahtlos in das [FilaMan-System](https://github.com/Fire-Devils/filaman-system).
**NEU ab 3.3.1:** Eine abgespeckte Version ohne Waage ist ebenfalls möglich. Details finden sich unter [NFC-only Modus](docs/NFC-only_mode_de.md).
![Waage](./img/scale_trans.png)
Weitere Bilder finden Sie im [img Ordner](/img/)
oder auf meiner Website: [FilaMan Website](https://www.filaman.app)
Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Weitere Bilder finden Sie im [img Ordner](/img/)
oder auf meiner Website: [FilaMan Website](https://www.filaman.app)
Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Discord Server: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
## NEU: Recycling Fabrik
@@ -27,7 +28,7 @@ dass die Spulen automatisch erkannt und über die FilaMan-Waage direkt in das Fi
**Was ist die Recycling Fabrik?**
Die Recycling Fabrik ist ein deutsches Unternehmen, das sich der Entwicklung und Herstellung von nachhaltigem 3D-Druck-Filament verschrieben hat.
Die Recycling Fabrik ist ein deutsches Unternehmen, das sich der Entwicklung und Herstellung von nachhaltigem 3D-Druck-Filament verschrieben hat.
Ihre Filamente bestehen zu 100 % aus recyceltem Material von Endkunden und aus der Industrie – für eine umweltbewusste und ressourcenschonende Zukunft.
Weitere Informationen und Produkte finden Sie hier: [www.recyclingfabrik.com](https://www.recyclingfabrik.com)
@@ -45,7 +46,7 @@ Weitere Informationen und Produkte finden Sie hier: [www.recyclingfabrik.com](ht
### Weboberflächen-Features
- **Echtzeit-Updates:** WebSocket-Verbindung für Live-Datenaktualisierungen.
- **NFC-Tag-Verwaltung:**
- **NFC-Tag-Verwaltung:**
- Schreiben von Filamentdaten auf NFC-Tags.
- Unterstützt automatische Spulenerkennung in kompatiblen Systemen.
- **FilaMan-System Integration:**
@@ -110,19 +111,23 @@ Wenn Sie einen Hersteller-NFC-Tag zum ersten Mal scannen:
### Pin-Konfiguration
| Komponente | ESP32 Pin |
|-------------------|-----------|
| HX711 DOUT | 16 |
| HX711 SCK | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
| Komponente | ESP32 Pin | ESP32-S3 Pin |
|-------------------|-----------|--------------|
| HX711 DOUT | 16 | 5 |
| HX711 SCK | 17 | 6 |
| OLED SDA | 21 | 8 |
| OLED SCL | 22 | 9 |
| PN532 IRQ | 32 | 15 |
| PN532 RESET | 33 | 16 |
| PN532 SDA | 21 | 8 |
| PN532 SCL | 22 | 9 |
| TTP223 I/O | 25 | 7 |
**!! Stellen Sie sicher, dass die DIP-Schalter am PN532 auf I2C eingestellt sind.**
Die I2C-Pins sind die Arduino-Standardwerte des jeweiligen Chips und werden im Code nicht explizit gesetzt.
**!! ESP32-S3: GPIO19/GPIO20 nicht für den HX711 verwenden.** Das sind die nativen USB-Datenleitungen (D-/D+), die auf dem DevKitC-1 an der "USB"-Buchse liegen. Der HX711 wird dort nur unzuverlässig erkannt.
**!! Stellen Sie sicher, dass die DIP-Schalter am PN532 auf I2C eingestellt sind.**
**Verwenden Sie den 3V-Pin des ESP für den Touch-Sensor.**
![Verkabelung](./img/Schaltplan.png)
@@ -130,10 +135,10 @@ Wenn Sie einen Hersteller-NFC-Tag zum ersten Mal scannen:
![meineVerkabelung](./img/IMG_2589.jpeg)
![meineVerkabelung](./img/IMG_2590.jpeg)
*Die Wägezelle wird an die meisten HX711-Module wie folgt angeschlossen:
E+ rot
E- schwarz
A- weiß
*Die Wägezelle wird an die meisten HX711-Module wie folgt angeschlossen:
E+ rot
E- schwarz
A- weiß
A+ grün*
## Software-Abhängigkeiten
+28 -23
View File
@@ -2,17 +2,18 @@
⚠️ **Important: Starting with v3.0.0, this system requires the [FilaMan-System](https://github.com/Fire-Devils/filaman-system) backend. Previous direct integrations (Spoolman, MQTT, Bambu Lab) have been moved to the central FilaMan-System.**
FilaMan is a filament management tool for 3D printing. It uses ESP32 hardware for weight measurement and NFC tag management.
Users can manage filament spools and configure the device via a web interface.
FilaMan is a filament management tool for 3D printing. It uses ESP32 hardware for weight measurement and NFC tag management.
Users can manage filament spools and configure the device via a web interface.
The system integrates seamlessly with the [FilaMan-System](https://github.com/Fire-Devils/filaman-system).
**NEW since 3.3.1:** A reduced version w/o scale is also available. Details can be found in [NFC-only mode](docs/NFC-only_mode_en.md).
![Scale](./img/scale_trans.png)
More Images can be found in the [img Folder](/img/)
or my website: [FilaMan Website](https://www.filaman.app)
german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
More Images can be found in the [img Folder](/img/)
or my website: [FilaMan Website](https://www.filaman.app)
german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
Discord Server: [https://discord.gg/my7Gvaxj2v](https://discord.gg/my7Gvaxj2v)
## NEW: Recycling Fabrik
@@ -27,7 +28,7 @@ that the spools can be automatically recognized and imported into the FilaMan-Sy
**What is Recycling Fabrik?**
Recycling Fabrik is a German company dedicated to developing and manufacturing sustainable 3D printing filament.
Recycling Fabrik is a German company dedicated to developing and manufacturing sustainable 3D printing filament.
Their filaments are made from 100% recycled material from both end customers and industry – for an environmentally conscious and resource-saving future.
More information and products can be found here: [www.recyclingfabrik.com](https://www.recyclingfabrik.com)
@@ -45,7 +46,7 @@ More information and products can be found here: [www.recyclingfabrik.com](https
### Web Interface Features
- **Real-time Updates:** WebSocket connection for live data updates.
- **NFC Tag Management:**
- **NFC Tag Management:**
- Write filament data to NFC tags.
- Supports automatic Spool detection in compatible systems.
- **FilaMan-System Integration:**
@@ -110,19 +111,23 @@ When you scan a manufacturer NFC tag for the first time:
### Pin Configuration
| Component | ESP32 Pin |
|-------------------|-----------|
| HX711 DOUT | 16 |
| HX711 SCK | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
| Component | ESP32 Pin | ESP32-S3 Pin |
|-------------------|-----------|--------------|
| HX711 DOUT | 16 | 5 |
| HX711 SCK | 17 | 6 |
| OLED SDA | 21 | 8 |
| OLED SCL | 22 | 9 |
| PN532 IRQ | 32 | 15 |
| PN532 RESET | 33 | 16 |
| PN532 SDA | 21 | 8 |
| PN532 SCL | 22 | 9 |
| TTP223 I/O | 25 | 7 |
**!! Make sure that the DIP switches on the PN532 are set to I2C**
The I2C pins are the Arduino defaults for each chip and are not set explicitly in the code.
**!! ESP32-S3: do not use GPIO19/GPIO20 for the HX711.** These are the native USB data lines (D-/D+) and are wired to the "USB" connector on the DevKitC-1, which makes the HX711 detection unreliable.
**!! Make sure that the DIP switches on the PN532 are set to I2C**
**Use the 3V pin from the ESP for the touch sensor**
![Wiring](./img/Schaltplan.png)
@@ -130,10 +135,10 @@ When you scan a manufacturer NFC tag for the first time:
![myWiring](./img/IMG_2589.jpeg)
![myWiring](./img/IMG_2590.jpeg)
*The load cell is connected to most HX711 modules as follows:
E+ red
E- black
A- white
*The load cell is connected to most HX711 modules as follows:
E+ red
E- black
A- white
A+ green*
## Software Dependencies
Binary file not shown.
Binary file not shown.
Binary file not shown.
+4
View File
@@ -0,0 +1,4 @@
- The **low version** has the same dimensions as the casing of [FilaMan Revamped](https://makerworld.com/de/models/1258715-filaman-revamped-nfc-based-spoolman-scale?designId=1258715-filaman-revamped-nfc-based-spoolman-scale#profileId-1367621).
But because of the missing scale the distance between the PN532 and a NFC tag placed on the marked area might be too narrow, what leads to weak/failed connection.
- The **high version** takes account of this but makes the casing 10mm higher
+166 -5
View File
@@ -41,11 +41,11 @@
<div class="fm-card">
<h2>System Registration</h2>
<p>Current Status: <strong style="color: var(--accent);">{{registered}}</strong></p>
<p>Current Status: <strong style="color: var(--accent);">%registered%</strong></p>
<div class="fm-form-group" style="margin-top: 2rem;">
<label class="fm-label" for="filamanUrl">FilaMan API URL</label>
<input type="text" id="filamanUrl" class="fm-input" value="{{filamanUrl}}" placeholder="e.g. http://192.168.1.10:8000">
<input type="text" id="filamanUrl" class="fm-input" value="%filamanUrl%" placeholder="e.g. http://192.168.1.10:8000">
</div>
<div class="fm-form-group">
@@ -57,6 +57,54 @@
<button id="registerBtn" class="fm-btn fm-btn-primary">Register Device</button>
<div id="statusMessage" style="margin-top: 1.5rem;"></div>
</div>
<div class="fm-card">
<h2>General Settings</h2>
<div class="fm-form-group" style="margin-top: 1rem;">
<label class="fm-label" for="languageSelect">Display Language</label>
<select id="languageSelect" class="fm-input">
<option value="en">English</option>
<option value="de">Deutsch</option>
</select>
</div>
</div>
<div class="fm-card">
<h2>Display Settings</h2>
<div class="fm-form-group" style="margin-top: 1rem;">
<label class="fm-label" for="sleepTimeoutSelect">OLED Sleep Timeout</label>
<select id="sleepTimeoutSelect" class="fm-input">
<option value="0">Disabled (always on)</option>
<option value="30">30 seconds</option>
<option value="60">1 minute</option>
<option value="120">2 minutes</option>
<option value="300">5 minutes</option>
<option value="600">10 minutes</option>
</select>
<p style="font-size: 0.8rem; margin-top: 0.5rem;">Display wakes automatically on weight change or NFC tag read.</p>
</div>
<div id="sleepStatusMessage" style="margin-top: 0.5rem;"></div>
</div>
<div class="fm-card">
<h2>WiFi Settings</h2>
<div class="fm-form-group" style="margin-top: 1rem;">
<label class="fm-label" for="txPowerSelect">WiFi Transmit Power</label>
<select id="txPowerSelect" class="fm-input">
<option value="195">19.5 dBm (default, maximum range)</option>
<option value="170">17 dBm</option>
<option value="150">15 dBm</option>
<option value="130">13 dBm</option>
<option value="110">11 dBm</option>
<option value="85">8.5 dBm (lowest)</option>
</select>
<p style="font-size: 0.8rem; margin-top: 0.5rem;">Only lower this if your router keeps dropping the device, or if it sits right next to the access point. Applies immediately, no restart needed.</p>
</div>
<div id="txPowerStatusMessage" style="margin-top: 0.5rem;"></div>
</div>
</main>
</div>
@@ -70,6 +118,105 @@
})
.catch(error => console.error('Error fetching version:', error));
// Language setting
fetch('/api/language')
.then(response => response.json())
.then(data => {
document.getElementById('languageSelect').value = data.lang;
})
.catch(error => console.error('Error fetching language:', error));
document.getElementById('languageSelect').addEventListener('change', function() {
fetch('/api/language', {
method: 'POST',
headers: { 'Content-Type': 'application/json' },
body: JSON.stringify({ lang: this.value })
})
.then(response => response.json())
.then(data => {
if (data.success) {
console.log('Language saved');
}
})
.catch(error => console.error('Error saving language:', error));
});
// Display sleep timeout setting
fetch('/api/display')
.then(response => response.json())
.then(data => {
const sel = document.getElementById('sleepTimeoutSelect');
const val = String(data.sleepTimeout);
// Select closest matching option
let matched = false;
for (let i = 0; i < sel.options.length; i++) {
if (sel.options[i].value === val) { sel.value = val; matched = true; break; }
}
if (!matched) sel.value = '0';
})
.catch(error => console.error('Error fetching display settings:', error));
document.getElementById('sleepTimeoutSelect').addEventListener('change', function() {
const msg = document.getElementById('sleepStatusMessage');
fetch('/api/display', {
method: 'POST',
headers: { 'Content-Type': 'application/json' },
body: JSON.stringify({ sleepTimeout: parseInt(this.value) })
})
.then(response => response.json())
.then(data => {
if (data.success) {
msg.textContent = 'Saved.';
msg.style.color = 'var(--success-text)';
setTimeout(() => { msg.textContent = ''; }, 2000);
}
})
.catch(error => {
msg.textContent = 'Error saving setting.';
msg.style.color = 'var(--error-text)';
console.error('Error saving display settings:', error);
});
});
// WiFi transmit power setting
fetch('/api/wifi-power')
.then(response => response.json())
.then(data => {
const sel = document.getElementById('txPowerSelect');
const val = String(data.txPower);
let matched = false;
for (let i = 0; i < sel.options.length; i++) {
if (sel.options[i].value === val) { sel.value = val; matched = true; break; }
}
if (!matched) sel.value = '195';
})
.catch(error => console.error('Error fetching wifi power:', error));
document.getElementById('txPowerSelect').addEventListener('change', function() {
const msg = document.getElementById('txPowerStatusMessage');
fetch('/api/wifi-power', {
method: 'POST',
headers: { 'Content-Type': 'application/json' },
body: JSON.stringify({ txPower: parseInt(this.value) })
})
.then(response => response.json())
.then(data => {
if (data.success) {
msg.textContent = 'Saved.';
msg.style.color = 'var(--success-text)';
setTimeout(() => { msg.textContent = ''; }, 2000);
} else {
msg.textContent = 'Error saving setting.';
msg.style.color = 'var(--error-text)';
}
})
.catch(error => {
msg.textContent = 'Error saving setting.';
msg.style.color = 'var(--error-text)';
console.error('Error saving wifi power:', error);
});
});
document.getElementById('registerBtn').addEventListener('click', () => {
const url = document.getElementById('filamanUrl').value;
const code = document.getElementById('deviceCode').value;
@@ -92,9 +239,10 @@
.then(response => response.json())
.then(data => {
if (data.success) {
statusMessage.textContent = 'Registration successful! Rebooting...';
statusMessage.style.color = 'var(--success-text)';
setTimeout(() => fetch('/reboot'), 2000);
// 202 Accepted: Registrierung wurde nur eingereiht. Das
// tatsaechliche Ergebnis kommt per WebSocket ('registerResult').
statusMessage.textContent = 'Registering device...';
statusMessage.style.color = 'var(--text-muted)';
} else {
statusMessage.textContent = 'Registration failed. Please check your code and URL.';
statusMessage.style.color = 'var(--error-text)';
@@ -118,6 +266,19 @@
dot.className = data.filaman_connected ? 'status-dot online' : 'status-dot offline';
document.getElementById('ramStatus').textContent = data.freeHeap + ' KB free';
}
else if (data.type === 'registerResult') {
// Die Registrierung laeuft asynchron im API-Task; /api/register
// antwortet sofort mit 202, das Ergebnis kommt hier an.
const statusMessage = document.getElementById('statusMessage');
if (data.success) {
statusMessage.textContent = 'Registration successful!';
statusMessage.style.color = 'var(--success-text)';
setTimeout(() => location.reload(), 2000);
} else {
statusMessage.textContent = 'Registration failed. Please check your code and URL.';
statusMessage.style.color = 'var(--error-text)';
}
}
};
ws.onclose = () => setTimeout(connectWebSocket, 2000);
}
+1 -1
View File
@@ -46,7 +46,7 @@
<button id="tareBtn" class="fm-btn fm-btn-outline">Tare Scale</button>
<label class="status-pill" style="display: flex; align-items: center; gap: 0.5rem; cursor: pointer;">
<input type="checkbox" id="autoTareCheckbox" onchange="setAutoTare(this.checked);" {{autoTare}}>
<input type="checkbox" id="autoTareCheckbox" onchange="setAutoTare(this.checked);" %autoTare%>
<span>Enable Auto-TARE</span>
</label>
</div>
+73
View File
@@ -0,0 +1,73 @@
# NFC-only Modus
## Beschreibung
Es kann praktisch sein, ein kleines Gerät in der Nähe deines Desktop-Computers zu haben, wenn du neue Spulen in deine Datenbank hinzufügst.
So kannst du sofort NFC-Tags für sie schreiben. Da keine Waage erforderlich ist (das Gewicht einer neuen Spule ist in der Regel bekannt), ist es sinnvoll, auf diese Funktion zu verzichten, um einen kleineren Formfaktor zu erreichen.
![FilaLite_no_scale](../img/FilaLite_no_scale.png)
## Bedienung
Bevor du das NFC-only Terminal verwenden kannst, musst du es in der `FilaMan System App` registrieren, wie bei jeder anderen Waage auch.
### Tag schreiben
Hauptzweck ist das Schreiben neuer NFC-Tags.
Du startest den Schreibvorgang in der `FilaMan System App` (Web-GUI). Dann wählst du dein NFC-Gerät aus und folgst den Anweisungen auf dem Display.
### Tag lesen
Das Gerät kann Tags zwar lesen, sinnvolle Anwendungsfälle sind jedoch ohne Waage eingeschränkt.
Du kannst trotzdem eine Spule identifizieren und ihr einen Standort mit dem entsprechenden Standort-Tag zuweisen.
Aber ehrlich gesagt: der Hauptzweck des NFC-only Gerätes ist **TAG SCHREIBEN**.
## NFC-only Modus
Beim Start versucht der ESP32, den HX711 (Verstärker) zusammen mit einem angeschlossenen Loadcell-Sensor zu erkennen. Wenn das gelingt, startet er im Normalmodus mit voller Funktionalität.
Andernfalls schaltet er in den **NFC-only Modus**!
Statt einer Gewichtsanzeige zeigt das Display eine Bereitschaftsmeldung. Zusätzlich ist das Waagensymbol in der oberen Zeile durchgestrichen.
![Ready Prompt](../img/no_scale_ready.png)
## Aufbau / Installation
### Hardware
Die Verkabelung der Hardware ist gleich wie bei der originalen, voll ausgestatteten FilaMan-Waage. Es gibt nur 3 Unterschiede:
- Kein HX711 angeschlossen (und natürlich keine Loadcell)
- Kein Tastensensor (ohne Waage ist kein Tarieren nötig)
- optional: 10k Pull-up-Widerstand an Pin 16 (RX2)
Der Pull-up-Widerstand ist nicht zwingend erforderlich, erhöht aber die Zuverlässigkeit beim Erkennen eines fehlenden HX711. Ohne Pull-up-Widerstand sollte es aber ebenfalls funktionieren.
![Schaltplan mit Pull-Up](../img/Schaltplan%20NFC-only%20pullup.png)
| Komponente | ESP32 Pin |
| ---- | ---- |
| 10k Pull-up | 16 |
| | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
#### PN532
- **!! Stelle sicher, dass die DIP-Schalter des PN532 auf I2C gestellt sind**
- Verbinde `VCC` mit 5V
#### OLED
- Verbinde `VCC` mit 3,3V
#### 10k Widerstand (optional)
- Verbinde den Widerstand mit PIN 16 (wo normalerweise der DOUT des HX711 angeschlossen wäre) und 5V
### Software
Folge den Anweisungen in der [Hauptdokumentation](../README.de.md#schritt-für-schritt-installation).
Du benötigst Version 3.3.1 oder neuer für eine funktionierende Hardware-Erkennung und den NFC-only Modus.
## Druck-Dateien
[STLs](../_3D%20Print%20Files/FilaMan_Lite/)
+79
View File
@@ -0,0 +1,79 @@
# NFC-only mode
## Description
It may be convenient to have a small device near your desktop computer when adding new spools to your database.
So you are able to write NFC-tags for them right away. Since there is no need for a scale (the weight of a new
spool should be well known), it is pleasant to leave the scale functionality out in advance of a smaller footprint.
![FilaLite_no_scale](../img/FilaLite_no_scale.png)
## Usage
Before you can use the NFC-only device, you have to register it to your FilaMan System App as
you would do with any regular scale device.
### Tag Writing
Its main purpose is to write new NFC tags.
You start the writing process from within the FilaMan System App (Web GUI). You than select
your NFC device and follow the instructions on the device display.
### Tag Reading
Although the device is fully capable of tag reading, its use cases are limited due to the lack of a scale.
But you can still identify a spool and assign it to a location with the according location tag.
But to be honest: the main purpose of the NFC-only device is **TAG WRITING**.
## NFC-only mode
During startup, the ESP32 tries to detect the HX711 (amplifier) together with a connected
loadcell sensor. If successful it starts into normal mode with full functionality.
Otherwise it switches in **NFC-only mode!**
Instead of a weight reading the display shows a ready prompts. Additionally the scale icon
in the top row is crossed out.
![Ready Prompt](../img/no_scale_ready.png)
## Build / Installation
### Hardware
The wiring of the hardware is the same as the original, fully equipped FilaMan scale. There are only 3 differences:
- No HX711 connected (also no loadcell of course)
- No touch sensor (without scale there is no need to tare)
- optional: 10k pull-up resistor on Pin 16 (RX2)
The pull-up resistor is not mandatory, but for good measure. It makes it more reliable to
detect a missing hx711. But it should also work w/o the pull-up resistor.
![Schaltplan mit Pull-Up](../img/Schaltplan%20NFC-only%20pullup.png)
| Component | ESP32 Pin |
| ---- | ---- |
| 10k pull-up | 16 |
| | 17 |
| OLED SDA | 21 |
| OLED SCL. | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
#### PN532
- !! Make sure that the DIP switches on the PN532 are set to I2C
- Connect `VCC` to 5V
#### OLED
- Connect `VCC` to 3.3V
#### 10k Resistor (optional)
- Connect to PIN 16 (where normally the DOUT of the HX711 would connect to) and 5V
### Software
Follow the instructions in the [main readme](../README.md#step-by-step-installation).
You need version 3.3.1 or later for a working hardware recognition and NFC-only mode.
## Print Files
[STLs](../_3D%20Print%20Files/FilaMan_Lite/)
Binary file not shown.
Binary file not shown.

After

Width:  |  Height:  |  Size: 1.4 MiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 205 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 59 KiB

+54 -46
View File
@@ -9,61 +9,69 @@
; https://docs.platformio.org/page/projectconf.html
[common]
version = "3.1.0"
to_old_version = "3.0.9"
version = "3.4.9"
to_old_version = "3.4.0"
##
[env:esp32dev]
platform = espressif32
platform = espressif32@^6.0.0
board = esp32dev
framework = arduino
monitor_speed = 115200
#monitor_port = /dev/cu.usbmodem01
lib_deps =
tzapu/WiFiManager @ ^2.0.17
https://github.com/me-no-dev/ESPAsyncWebServer.git#master
https://github.com/esphome/AsyncTCP.git
bogde/HX711 @ ^0.7.5
adafruit/Adafruit SSD1306 @ ^2.5.13
adafruit/Adafruit GFX Library @ ^1.11.11
adafruit/Adafruit PN532 @ ^1.3.3
bblanchon/ArduinoJson @ ^7.3.0
knolleary/PubSubClient @ ^2.8
digitaldragon/SSLClient @ ^1.3.2
; Enable SPIFFS upload
board_build.filesystem = littlefs
; Update partition settings
board_build.partitions = partitions.csv
board_upload.flash_size = 4MB
board_build.flash_mode = dio
board_upload.flash_freq = "40m"
build_flags =
-Os
-ffunction-sections
-fdata-sections
#-DNDEBUG
-mtext-section-literals
-DVERSION=\"${common.version}\"
-DTOOLDVERSION=\"${common.to_old_version}\"
#-DENABLE_HEAP_DEBUGGING
-DASYNCWEBSERVER_REGEX
#-DCORE_DEBUG_LEVEL=3
-DCONFIG_ARDUHAL_LOG_COLORS=1
#-DOTA_DEBUG=1
-DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-DBOOT_APP_PARTITION_OTA_0=1
-DCONFIG_LWIP_TCP_MSL=60000
-DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=4096
-DCONFIG_LWIP_MAX_ACTIVE_TCP=16
-DCONFIG_ASYNC_TCP_RUNNING_CORE=0
-DCONFIG_ASYNC_TCP_USE_WDT=0
extra_scripts =
scripts/extra_script.py
extra_scripts = scripts/extra_script.py
[platformio]
default_envs = esp32dev
default_envs =
esp32dev
esp32-s3-devkitc-1
[env]
build_flags =
-Os
-ffunction-sections
-fdata-sections
-mtext-section-literals
-DVERSION=\"${common.version}\"
-DTOOLDVERSION=\"${common.to_old_version}\"
-DASYNCWEBSERVER_REGEX
-DCONFIG_ARDUHAL_LOG_COLORS=1
-DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
-DBOOT_APP_PARTITION_OTA_0=1
-DCONFIG_ASYNC_TCP_RUNNING_CORE=1
-DCONFIG_ASYNC_TCP_MAX_ACK_TIME=10000
-DCONFIG_ASYNC_TCP_QUEUE_SIZE=128
-DCONFIG_ASYNC_TCP_STACK_SIZE=8192
-DCONFIG_ASYNC_TCP_PRIORITY=10
# WDT für AsyncTCP deaktiviert: Mit aktivem WDT konnten langsame
# WebSocket-Sender (z. B. große ws.textAll-JSONs) den AsyncTCP-Task
# killen und so alle Clients abwerfen.
-DCONFIG_ASYNC_TCP_USE_WDT=0
-DCONFIG_LWIP_TCP_MSL=30000
-DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=8192
-DCONFIG_LWIP_MAX_ACTIVE_TCP=16
lib_deps =
tzapu/WiFiManager
https://github.com/me-no-dev/ESPAsyncWebServer.git#master
https://github.com/esphome/AsyncTCP.git
bogde/HX711 @ ^0.7.5
adafruit/Adafruit SSD1306 @ ^2.5.13
adafruit/Adafruit GFX Library @ ^1.11.11
adafruit/Adafruit PN532 @ ^1.3.3
bblanchon/ArduinoJson @ ^7.3.0
knolleary/PubSubClient @ ^2.8
digitaldragon/SSLClient @ ^1.3.2
monitor_speed = 115200
[env:esp32-s3-devkitc-1]
board = esp32-s3-devkitc-1
framework = arduino
extra_scripts = scripts/extra_script.py
upload_protocol = esptool
board_build.flash_mode = dio
platform = espressif32
board_build.filesystem = littlefs
board_build.partitions = partitions.csv
board_upload.flash_size = 8MB
+112 -16
View File
@@ -8,6 +8,8 @@
#include "nfc.h"
#include "config.h"
#include <WiFi.h>
#include "display.h"
#include "lang.h"
volatile filamanApiStateType filamanApiState = API_IDLE;
bool filamanConnected = false;
@@ -78,10 +80,12 @@ bool registerDevice(const String& deviceCode) {
bool sendHeartbeat() {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(3000);
http.setTimeout(10000); // 10s statt 3s - wichtig für instabile Verbindungen
http.setReuse(true); // Keep-Alive aktivieren für bessere Performance
http.begin(filamanUrl + "/api/v1/devices/heartbeat");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive"); // Explizit Keep-Alive anfordern
JsonDocument doc;
doc["ip_address"] = WiFi.localIP().toString();
String payload;
@@ -92,6 +96,21 @@ bool sendHeartbeat() {
return filamanConnected;
}
// Heartbeat mit Retry-Logik für mehr Stabilität
bool sendHeartbeatWithRetry(int maxRetries = 2) {
for (int attempt = 0; attempt <= maxRetries; attempt++) {
if (sendHeartbeat()) {
return true;
}
if (attempt < maxRetries) {
Serial.printf("Heartbeat failed, retry %d/%d...\n", attempt + 1, maxRetries);
vTaskDelay(pdMS_TO_TICKS(1000)); // 1s warten vor Retry
}
}
Serial.println("Heartbeat failed after all retries");
return false;
}
bool sendWeight(int spoolId, String tagUuid, float measuredWeight) {
Serial.printf("sendWeight: sending to API - spoolId=%d, tagUuid=%s, weight=%.1f\n", spoolId, tagUuid.c_str(), measuredWeight);
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) {
@@ -99,10 +118,12 @@ bool sendWeight(int spoolId, String tagUuid, float measuredWeight) {
return false;
}
HTTPClient http;
http.setTimeout(3000);
http.setTimeout(10000); // 10s Timeout
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/scale/weight");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
// Only add spool_id if it's > 0 (for NTAG tags with spool ID)
// For Bambu tags (spoolId == 0), only send tag_uuid
@@ -115,28 +136,28 @@ bool sendWeight(int spoolId, String tagUuid, float measuredWeight) {
Serial.printf("API payload: %s\n", payload.c_str());
int httpCode = http.POST(payload);
Serial.printf("API response code: %d\n", httpCode);
if (httpCode == 200) {
String response = http.getString();
JsonDocument responseDoc;
DeserializationError error = deserializeJson(responseDoc, response);
if (!error && responseDoc["remaining_weight_g"].is<float>()) {
int remaining = (int)responseDoc["remaining_weight_g"].as<float>();
pauseMainTask = 1;
oledShowRemainingWeight(remaining);
oledSetPriority(DISPLAY_PRIORITY_ACTION, 3000);
vTaskDelay(pdMS_TO_TICKS(3000));
pauseMainTask = 0;
oledClearPriority();
}
http.end();
return true;
}
else {
pauseMainTask = 1;
oledShowProgressBar(1, 1, "Failure", "API Error");
oledShowProgressBar(1, 1, tr(STR_FAILURE), tr(STR_API_ERROR));
oledSetPriority(DISPLAY_PRIORITY_WARNING, 2000);
vTaskDelay(pdMS_TO_TICKS(2000));
pauseMainTask = 0;
oledClearPriority();
}
http.end();
return false;
}
@@ -144,10 +165,12 @@ bool sendWeight(int spoolId, String tagUuid, float measuredWeight) {
bool sendLocation(int spoolId, String spoolTagUuid, int locationId, String locationTagUuid) {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(3000);
http.setTimeout(10000); // 10s Timeout
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/scale/locate");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
if (spoolId > 0) doc["spool_id"] = spoolId;
if (spoolTagUuid.length() > 0) doc["spool_tag_uuid"] = spoolTagUuid;
@@ -163,11 +186,13 @@ bool sendLocation(int spoolId, String spoolTagUuid, int locationId, String locat
bool sendRfidResult(String tagUuid, int spoolId, int locationId, bool success, String errorMessage, float remainingWeight) {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(5000);
http.setTimeout(10000); // 10s Timeout
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/rfid-result");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
doc["success"] = success;
if (tagUuid.length() > 0) doc["tag_uuid"] = tagUuid;
@@ -175,7 +200,7 @@ bool sendRfidResult(String tagUuid, int spoolId, int locationId, bool success, S
if (locationId > 0) doc["location_id"] = locationId;
if (errorMessage.length() > 0) doc["error_message"] = errorMessage;
if (remainingWeight > 0) doc["remaining_weight_g"] = remainingWeight;
String payload;
serializeJson(doc, payload);
int httpCode = http.POST(payload);
@@ -183,11 +208,30 @@ bool sendRfidResult(String tagUuid, int spoolId, int locationId, bool success, S
return (httpCode == 200);
}
bool sendTagData(String tagJson) {
if (!checkFilamanRegistration() || WiFi.status() != WL_CONNECTED) return false;
HTTPClient http;
http.setTimeout(10000);
http.setReuse(true);
http.begin(filamanUrl + "/api/v1/devices/tag-data");
http.addHeader("Content-Type", "application/json");
http.addHeader("Authorization", "Device " + filamanToken);
http.addHeader("Connection", "keep-alive");
JsonDocument doc;
doc["tag_json"] = tagJson;
String payload;
serializeJson(doc, payload);
int httpCode = http.POST(payload);
http.end();
Serial.printf("sendTagData: HTTP %d\n", httpCode);
return (httpCode == 200);
}
void filamanApiTask(void* pvParameters) {
for (;;) {
ApiRequest req;
bool hasReq = false;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(100)) == pdTRUE) {
for(int i=0; i<MAX_API_QUEUE; i++) {
if(apiQueue[i].active) {
@@ -203,10 +247,21 @@ void filamanApiTask(void* pvParameters) {
if (hasReq) {
filamanApiState = API_TRANSMITTING;
switch (req.type) {
case API_REQUEST_HEARTBEAT: sendHeartbeat(); break;
case API_REQUEST_REGISTER: {
// URL übernehmen und persistieren, dann blockierend
// registrieren - hier unkritisch, da eigener Task.
if (req.str2.length() > 0) filamanUrl = req.str2;
saveFilamanConfig();
bool ok = registerDevice(req.str1);
Serial.printf("registerDevice: %s\n", ok ? "success" : "failed");
sendRegisterResult(ok);
break;
}
case API_REQUEST_HEARTBEAT: sendHeartbeatWithRetry(2); break;
case API_REQUEST_WEIGHT: sendWeight(req.id1, req.str1, req.val); break;
case API_REQUEST_LOCATE: sendLocation(req.id1, req.str1, req.id2, req.str2); break;
case API_REQUEST_RFID_RESULT: sendRfidResult(req.str1, req.id1, req.id2, req.bool1, req.str3, req.remainingWeight); break;
case API_REQUEST_TAG_DATA: sendTagData(req.str1); break;
default: break;
}
filamanApiState = API_IDLE;
@@ -215,6 +270,29 @@ void filamanApiTask(void* pvParameters) {
}
}
// Reiht die Registrierung ein, statt sie im AsyncTCP-Kontext auszuführen.
// str2 = FilaMan-URL, str1 = Device-Code.
bool registerDeviceAsync(const String& url, const String& deviceCode) {
bool queued = false;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
for(int i=0; i<MAX_API_QUEUE; i++) if(!apiQueue[i].active) {
apiQueue[i].type = API_REQUEST_REGISTER;
apiQueue[i].id1 = 0;
apiQueue[i].id2 = 0;
apiQueue[i].str1 = deviceCode;
apiQueue[i].str2 = url;
apiQueue[i].val = 0.0f;
apiQueue[i].active = true;
queued = true;
break;
}
xSemaphoreGive(queueMutex);
}
// Ohne Queue-Platz kaeme nie ein "registerResult" - der Aufrufer muss
// dem Frontend dann sofort einen Fehler zurueckgeben.
return queued;
}
void sendHeartbeatAsync() {
if (!checkFilamanRegistration()) return;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
@@ -298,12 +376,30 @@ void sendRfidResultAsync(String tagUuid, int spoolId, int locationId, bool succe
}
}
void sendTagDataAsync(String tagJson) {
if (!checkFilamanRegistration()) return;
if (xSemaphoreTake(queueMutex, pdMS_TO_TICKS(50)) == pdTRUE) {
for(int i=0; i<MAX_API_QUEUE; i++) if(!apiQueue[i].active) {
apiQueue[i].type = API_REQUEST_TAG_DATA;
apiQueue[i].str1 = tagJson;
apiQueue[i].id1 = 0;
apiQueue[i].id2 = 0;
apiQueue[i].str2 = "";
apiQueue[i].val = 0.0f;
apiQueue[i].active = true;
break;
}
xSemaphoreGive(queueMutex);
}
}
bool initFilaman() {
oledShowProgressBar(3, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_API_INIT));
loadFilamanConfig();
queueMutex = xSemaphoreCreateMutex();
// Move to Core 1 (Hardware Core) to free up Core 0 for WiFi/Webserver
// Set priority to 1 (same as Scale/NFC) to ensure fair scheduling
xTaskCreatePinnedToCore(filamanApiTask, "FilaManApi", 6144, NULL, 1, NULL, 1);
xTaskCreatePinnedToCore(filamanApiTask, "FilaManApi", 6144, NULL, 1, NULL, 1);
if (checkFilamanRegistration()) sendHeartbeatAsync();
return true;
}
+4 -1
View File
@@ -17,7 +17,8 @@ typedef enum {
API_REQUEST_HEARTBEAT,
API_REQUEST_WEIGHT,
API_REQUEST_LOCATE,
API_REQUEST_RFID_RESULT
API_REQUEST_RFID_RESULT,
API_REQUEST_TAG_DATA
} FilamanApiRequestType;
extern volatile filamanApiStateType filamanApiState;
@@ -26,10 +27,12 @@ extern bool filamanConnected;
// FilaMan API functions
bool initFilaman();
bool registerDevice(const String& deviceCode);
bool registerDeviceAsync(const String& url, const String& deviceCode);
void sendHeartbeatAsync();
void sendWeightAsync(int spoolId, String tagUuid, float weight);
void sendLocationAsync(int spoolId, String spoolTagUuid, int locationId, String locationTagUuid);
void sendRfidResultAsync(String tagUuid, int spoolId, int locationId, bool success, String errorMessage, float remainingWeight = 0);
void sendTagDataAsync(String tagJson);
// Internal blocking functions (used by async task)
bool sendHeartbeat();
+12 -2
View File
@@ -57,10 +57,20 @@ String readFile(const char* filename) {
Serial.println(filename);
return "";
}
String content = "";
// Effizient: Speicher vorab allokieren und in Blöcken lesen
// Alte Implementierung war O(n²) wegen Byte-für-Byte String-Konkatenation
size_t fileSize = file.size();
String content;
content.reserve(fileSize + 1); // Speicher vorab allokieren
// Lese in 512-Byte Blöcken statt Byte für Byte
char buffer[512];
while (file.available()) {
content += (char)file.read();
size_t bytesRead = file.readBytes(buffer, sizeof(buffer));
content.concat(buffer, bytesRead);
}
file.close();
return content;
}
+28 -3
View File
@@ -6,21 +6,38 @@
//#define PN532_MOSI 23
//#define PN532_SS 5
//#define PN532_MISO 19
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t PN532_IRQ = 15;
const uint8_t PN532_RESET = 16;
#else
const uint8_t PN532_IRQ = 32;
const uint8_t PN532_RESET = 33;
#endif
// ***** PN532
// ***** HX711 (Waage)
// HX711 circuit wiring
const uint8_t LOADCELL_DOUT_PIN = 16; //16;
const uint8_t LOADCELL_SCK_PIN = 17; //17;
// ACHTUNG ESP32-S3: GPIO19/20 sind die nativen USB-Leitungen (D-/D+) und liegen auf
// dem DevKitC-1 an der "USB"-Buchse. Der HX711 wird dort unzuverlaessig erkannt.
// Pins hier nur zusammen mit den Tabellen in README.md / README.de.md aendern.
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t LOADCELL_DOUT_PIN = 5;
const uint8_t LOADCELL_SCK_PIN = 6;
#else
const uint8_t LOADCELL_DOUT_PIN = 16;
const uint8_t LOADCELL_SCK_PIN = 17;
#endif
const uint8_t calVal_eepromAdress = 0;
const uint16_t SCALE_LEVEL_WEIGHT = 500;
// ***** HX711
// ***** TTP223 (Touch Sensor)
// TTP223 circuit wiring
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t TTP223_PIN = 7;
#else
const uint8_t TTP223_PIN = 25;
#endif
// ***** TTP223
@@ -42,7 +59,15 @@ String filamanToken = "";
bool filamanRegistered = false;
// ***** API
// ***** Bambu Auto Set Spool
// ***** Display Sleep
uint16_t oledSleepTimeout = 60; // Default 60 seconds (0 = disabled)
// ***** Display Sleep
// ***** WiFi
// Sendeleistung in 0.1 dBm. Default 19.5dBm = Maximum; nur senken, wenn der AP
// das Geraet rauswirft (reason=2/4) oder es direkt neben dem AP steht.
int16_t wifiTxPowerDeciDbm = 195;
// ***** WiFi
// ***** Task Prios
uint8_t rfidTaskCore = 1;
+13 -2
View File
@@ -11,6 +11,11 @@
#define NVS_NAMESPACE_SCALE "scale"
#define NVS_KEY_CALIBRATION "cal_value"
#define NVS_KEY_AUTOTARE "auto_tare"
#define NVS_NAMESPACE_SETTINGS "settings"
#define NVS_KEY_LANGUAGE "language"
#define NVS_KEY_OLED_SLEEP "oled_sleep"
#define NVS_KEY_WIFI_TXPOWER "wifi_txpwr"
#define SCALE_DEFAULT_CALIBRATION_VALUE 430.0f;
#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)
@@ -21,10 +26,12 @@
#define SCREEN_PROGRESS_BAR_HEIGHT 12U
#define DISPLAY_BOOT_TEXT "FilaMan"
#define WIFI_CHECK_INTERVAL 60000U
#define WIFI_CHECK_INTERVAL 15000U
#define DISPLAY_UPDATE_INTERVAL 1000U
#define FILAMAN_HEARTBEAT_INTERVAL 60000U
#define NUM_SETUP_STEPS 6 // 0:Display 1:WiFi 2:Web-Server 3:API 4:NFC 5:Scale 6:<finished>
extern const uint8_t PN532_IRQ;
extern const uint8_t PN532_RESET;
@@ -67,4 +74,8 @@ extern uint8_t scaleTaskCore;
extern uint8_t scaleTaskPrio;
extern uint16_t defaultScaleCalibrationValue;
#endif
extern uint16_t oledSleepTimeout;
// WLAN-Sendeleistung in 0.1 dBm (195 = 19.5dBm). Siehe txPowerFromDeciDbm() in wlan.cpp.
extern int16_t wifiTxPowerDeciDbm;
#endif
+158 -52
View File
@@ -3,12 +3,105 @@
#include <vector>
#include "icons.h"
#include "main.h"
#include <cstring>
#include "lang.h"
#include <Preferences.h>
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
bool wifiOn = false;
bool iconToggle = false;
// Display priority management
static DisplayPriority currentPriority = DISPLAY_PRIORITY_NONE;
static unsigned long prioritySetTime = 0;
static unsigned long priorityMinDuration = 0;
// Display sleep management
static bool oledAsleep = false;
static unsigned long lastActivityMillis = 0;
void oledWake() {
if (oledAsleep) {
display.ssd1306_command(SSD1306_DISPLAYON);
oledAsleep = false;
}
lastActivityMillis = millis();
}
void oledSleep() {
if (!oledAsleep) {
display.ssd1306_command(SSD1306_DISPLAYOFF);
oledAsleep = true;
}
}
void oledResetActivityTimer() {
lastActivityMillis = millis();
if (oledAsleep) {
oledWake();
}
}
void oledCheckSleep() {
if (oledSleepTimeout == 0 || oledAsleep) return;
if (millis() - lastActivityMillis >= (unsigned long)oledSleepTimeout * 1000UL) {
oledSleep();
}
}
bool isOledAsleep() {
return oledAsleep;
}
void loadOledSleepTimeout() {
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, true);
oledSleepTimeout = preferences.getUShort(NVS_KEY_OLED_SLEEP, 60);
preferences.end();
Serial.print("OLED sleep timeout loaded: ");
Serial.println(oledSleepTimeout);
}
void saveOledSleepTimeout(uint16_t timeoutSecs) {
oledSleepTimeout = timeoutSecs;
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, false);
preferences.putUShort(NVS_KEY_OLED_SLEEP, timeoutSecs);
preferences.end();
}
bool oledCanUpdate(DisplayPriority newPriority) {
if (currentPriority == DISPLAY_PRIORITY_NONE) return true;
// Higher priority can always preempt
if (newPriority > currentPriority) return true;
// Same or lower priority: only if minimum duration has elapsed
unsigned long elapsed = millis() - prioritySetTime;
return elapsed >= priorityMinDuration;
}
void oledSetPriority(DisplayPriority priority, unsigned long minDurationMs) {
currentPriority = priority;
prioritySetTime = millis();
priorityMinDuration = minDurationMs;
}
void oledClearPriority() {
currentPriority = DISPLAY_PRIORITY_NONE;
prioritySetTime = 0;
priorityMinDuration = 0;
}
DisplayPriority oledGetCurrentPriority() {
// Auto-expire: if min duration has passed, priority is effectively NONE
if (currentPriority != DISPLAY_PRIORITY_NONE) {
unsigned long elapsed = millis() - prioritySetTime;
if (elapsed >= priorityMinDuration) {
currentPriority = DISPLAY_PRIORITY_NONE;
}
}
return currentPriority;
}
void setupDisplay() {
if (!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {
Serial.println(F("SSD1306 allocation failed"));
@@ -17,29 +110,20 @@ void setupDisplay() {
display.setTextColor(WHITE);
display.clearDisplay();
// Load sleep timeout from NVS
loadOledSleepTimeout();
lastActivityMillis = millis();
oledShowTopRow();
oledShowProgressBar(0, 7, DISPLAY_BOOT_TEXT, "Display init");
oledShowProgressBar(0, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_DISPLAY_INIT));
}
void oledclearline() {
int x, y;
for (y = 0; y < 16; y++) {
for (x = 0; x < SCREEN_WIDTH; x++) {
display.drawPixel(x, y, BLACK);
}
}
//display.display();
display.fillRect(0, 0, SCREEN_WIDTH, 16, BLACK);
}
void oledcleardata() {
int x, y;
for (y = OLED_DATA_START; y < OLED_DATA_END; y++) {
for (x = 0; x < SCREEN_WIDTH; x++) {
display.drawPixel(x, y, BLACK);
}
}
//display.display();
display.fillRect(0, OLED_DATA_START, SCREEN_WIDTH, OLED_DATA_END - OLED_DATA_START, BLACK);
}
int oled_center_h(const String &text) {
@@ -60,14 +144,14 @@ int oled_center_v(const String &text) {
std::vector<String> splitTextIntoLines(const String &text, uint8_t textSize) {
std::vector<String> lines;
display.setTextSize(textSize);
// Text in Wörter aufteilen
std::vector<String> words;
int pos = 0;
while (pos < text.length()) {
// Überspringe Leerzeichen am Anfang
while (pos < text.length() && text[pos] == ' ') pos++;
// Finde nächstes Leerzeichen
int nextSpace = text.indexOf(' ', pos);
if (nextSpace == -1) {
@@ -81,19 +165,19 @@ std::vector<String> splitTextIntoLines(const String &text, uint8_t textSize) {
words.push_back(text.substring(pos, nextSpace));
pos = nextSpace + 1;
}
// Wörter zu Zeilen zusammenfügen
String currentLine = "";
for (size_t i = 0; i < words.size(); i++) {
String testLine = currentLine;
if (currentLine.length() > 0) testLine += " ";
testLine += words[i];
// Prüfe ob diese Kombination auf die Zeile passt
int16_t x1, y1;
uint16_t lineWidth, h;
display.getTextBounds(testLine, 0, OLED_DATA_START, &x1, &y1, &lineWidth, &h);
if (lineWidth <= SCREEN_WIDTH) {
// Passt noch in diese Zeile
currentLine = testLine;
@@ -108,40 +192,40 @@ std::vector<String> splitTextIntoLines(const String &text, uint8_t textSize) {
}
}
}
// Letzte Zeile hinzufügen
if (currentLine.length() > 0) {
lines.push_back(currentLine);
}
return lines;
}
void oledShowMultilineMessage(const String &message, uint8_t size) {
std::vector<String> lines;
int maxLines = 3; // Maximale Anzahl Zeilen für size 2
// Erste Prüfung mit aktueller Größe
lines = splitTextIntoLines(message, size);
// Wenn mehr als maxLines Zeilen, reduziere Textgröße
if (lines.size() > maxLines && size > 1) {
size = 1;
lines = splitTextIntoLines(message, size);
}
// Ausgabe
display.setTextSize(size);
int lineHeight = size * 8;
int totalHeight = lines.size() * lineHeight;
int startY = OLED_DATA_START + ((OLED_DATA_END - OLED_DATA_START - totalHeight) / 2);
uint8_t lineDistance = (lines.size() == 2) ? 5 : 0;
for (size_t i = 0; i < lines.size(); i++) {
display.setCursor(oled_center_h(lines[i]), startY + (i * lineHeight) + (i == 1 ? lineDistance : 0));
display.print(lines[i]);
}
display.display();
}
@@ -149,12 +233,12 @@ void oledDisplayText(const String &message, uint8_t size) {
oledcleardata();
display.setTextSize(size);
display.setTextWrap(false);
// Prüfe ob Text in eine Zeile passt
int16_t x1, y1;
uint16_t textWidth, h;
display.getTextBounds(message, 0, 0, &x1, &y1, &textWidth, &h);
// Text passt in eine Zeile?
if (textWidth <= SCREEN_WIDTH) {
display.setCursor(oled_center_h(message), oled_center_v(message));
@@ -166,6 +250,12 @@ void oledDisplayText(const String &message, uint8_t size) {
}
void oledShowTopRow() {
const u_int8_t rightmost_x = 108;
const u_int8_t x_offset = 25;
const u_int8_t symbol_width =16;
const u_int8_t symbol_height =16;
u_int8_t x_pos = rightmost_x;
oledclearline();
display.setTextSize(1);
@@ -175,29 +265,45 @@ void oledShowTopRow() {
iconToggle = !iconToggle;
// draw symbols from right to left
// Do not show status indicators during boot
if(!booting){
if (filamanConnected) {
display.drawBitmap(80, 0, bitmap_spoolman_on , 16, 16, WHITE);
// WiFi
x_pos = rightmost_x;
if (wifiOn == 1) {
display.drawBitmap(x_pos, 0, wifi_on , symbol_width, symbol_height, WHITE);
} else {
if(iconToggle){
display.drawBitmap(80, 0, bitmap_spoolman_on , 16, 16, WHITE);
display.drawLine(80, 15, 96, 0, WHITE);
display.drawLine(81, 15, 97, 0, WHITE);
display.drawBitmap(x_pos, 0, wifi_on , symbol_width, symbol_height, WHITE);
display.drawLine(x_pos, symbol_height-1, x_pos + symbol_width, 0, WHITE);
display.drawLine(x_pos+1, symbol_height-1, x_pos+1 + symbol_width, 0, WHITE);
}
}
if (wifiOn == 1) {
display.drawBitmap(107, 0, wifi_on , 16, 16, WHITE);
// Backend
x_pos -= x_offset; // change x position to the left
if (filamanConnected) {
display.drawBitmap(x_pos, 0, bitmap_spoolman_on , symbol_width, symbol_height, WHITE);
} else {
if(iconToggle){
display.drawBitmap(107, 0, wifi_on , 16, 16, WHITE);
display.drawLine(107, 15, 123, 0, WHITE);
display.drawLine(108, 15, 124, 0, WHITE);
display.drawBitmap(x_pos, 0, bitmap_spoolman_on , symbol_width, symbol_height, WHITE);
display.drawLine(x_pos, symbol_height-1, x_pos + symbol_width, 0, WHITE);
display.drawLine(x_pos+1, symbol_height-1, x_pos+1 + symbol_width, 0, WHITE);
}
}
// Scale
x_pos -= x_offset; // change x position to the left
if (scaleConnected) {
display.drawBitmap(x_pos, 0, bitmap_scale_on , symbol_width, symbol_height, WHITE);
} else {
display.drawBitmap(x_pos, 0, bitmap_scale_on , symbol_width, symbol_height, WHITE);
display.drawLine(x_pos-1, symbol_height-1, x_pos-1 + symbol_width, 0, WHITE);
display.drawLine(x_pos, symbol_height-1, x_pos + symbol_width, 0, WHITE);
display.drawLine(x_pos+1, symbol_height-1, x_pos+1 + symbol_width, 0, WHITE);
}
}
display.display();
}
@@ -207,16 +313,16 @@ void oledShowIcon(const char* icon) {
uint16_t iconSize = OLED_DATA_END-OLED_DATA_START;
uint16_t iconStart = (SCREEN_WIDTH - iconSize) / 2;
if (icon == "failed") {
if (strcmp(icon, "failed") == 0) {
display.drawBitmap(iconStart, OLED_DATA_START, icon_failed , iconSize, iconSize, WHITE);
}
else if (icon == "success") {
else if (strcmp(icon, "success") == 0) {
display.drawBitmap(iconStart, OLED_DATA_START, icon_success , iconSize, iconSize, WHITE);
}
else if (icon == "transfer") {
else if (strcmp(icon, "transfer") == 0) {
display.drawBitmap(iconStart, OLED_DATA_START, icon_transfer , iconSize, iconSize, WHITE);
}
else if (icon == "loading") {
else if (strcmp(icon, "loading") == 0) {
display.drawBitmap(iconStart, OLED_DATA_START, icon_loading , iconSize, iconSize, WHITE);
}
@@ -229,7 +335,7 @@ void oledShowProgressBar(const uint8_t step, const uint8_t numSteps, const char*
// clear data and bar area
display.fillRect(0, OLED_DATA_START, SCREEN_WIDTH, SCREEN_HEIGHT-16, BLACK);
display.setTextWrap(false);
display.setTextSize(2);
display.setCursor(0, OLED_DATA_START+4);
@@ -244,7 +350,7 @@ void oledShowProgressBar(const uint8_t step, const uint8_t numSteps, const char*
display.display();
}
void oledShowWeight(uint16_t weight) {
void oledShowWeight(int16_t weight) {
// Display Gewicht
oledcleardata();
display.setTextSize(3);
@@ -257,9 +363,9 @@ void oledShowWeight(uint16_t weight) {
void oledShowRemainingWeight(uint16_t remainingWeight) {
oledcleardata();
display.setTextSize(1);
display.setCursor(oled_center_h("Weight sent, rest:"), OLED_DATA_START + 4);
display.print("Weight sent, rest:");
display.setCursor(oled_center_h(tr(STR_WEIGHT_SENT_REST)), OLED_DATA_START + 4);
display.print(tr(STR_WEIGHT_SENT_REST));
display.setTextSize(3);
String weightStr = String(remainingWeight) + " g";
display.setCursor(oled_center_h(weightStr), OLED_DATA_START + 22);
@@ -270,15 +376,15 @@ void oledShowRemainingWeight(uint16_t remainingWeight) {
void oledShowConnectionError(const char* error, const String& ip) {
oledcleardata();
display.setTextSize(1);
// Error Message
display.setCursor(oled_center_h(error), OLED_DATA_START + 4);
display.print(error);
// IP Address
display.setTextSize(1);
display.setCursor(oled_center_h(ip), OLED_DATA_START + 24);
display.print(ip);
display.display();
}
+24 -1
View File
@@ -6,19 +6,42 @@
#include <Adafruit_SSD1306.h>
#include "config.h"
// Display message priority levels (higher = more important)
enum DisplayPriority : uint8_t {
DISPLAY_PRIORITY_NONE = 0, // No message active
DISPLAY_PRIORITY_STATUS = 1, // Weight display, idle info
DISPLAY_PRIORITY_INFO = 2, // Progress bars, boot messages
DISPLAY_PRIORITY_ACTION = 3, // NFC feedback, user actions
DISPLAY_PRIORITY_WARNING = 4 // Errors, connection issues
};
extern Adafruit_SSD1306 display;
extern bool wifiOn;
// Display priority management
bool oledCanUpdate(DisplayPriority newPriority);
void oledSetPriority(DisplayPriority priority, unsigned long minDurationMs);
void oledClearPriority();
DisplayPriority oledGetCurrentPriority();
void setupDisplay();
void oledclearline();
void oledcleardata();
int oled_center_h(const String &text);
int oled_center_v(const String &text);
// Display sleep management
void oledWake();
void oledSleep();
void oledResetActivityTimer();
void oledCheckSleep();
bool isOledAsleep();
void loadOledSleepTimeout();
void saveOledSleepTimeout(uint16_t timeoutSecs);
void oledShowProgressBar(const uint8_t step, const uint8_t numSteps, const char* largeText, const char* statusMessage);
void oledShowWeight(uint16_t weight);
void oledShowWeight(int16_t weight);
void oledShowRemainingWeight(uint16_t remainingWeight);
void oledDisplayText(const String &message, uint8_t size = 2);
void oledShowConnectionError(const char* error, const String& ip);
+81 -75
View File
@@ -1,7 +1,7 @@
#include <Arduino.h>
/*
// Create Icons
// Create Icons
https://javl.github.io/image2cpp/
Size: 47x47
BG Color: Black
@@ -10,117 +10,123 @@ Ohters in default
*/
const unsigned char wifi_on [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xe0, 0x1f, 0xf8, 0x78, 0x1e, 0x60, 0x06, 0x07, 0xe0,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xe0, 0x1f, 0xf8, 0x78, 0x1e, 0x60, 0x06, 0x07, 0xe0,
0x0f, 0xf0, 0x08, 0x10, 0x00, 0x00, 0x03, 0xc0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
const unsigned char wifi_off [] PROGMEM = {
0x00, 0x00, 0x20, 0x00, 0x30, 0x00, 0x1b, 0xf0, 0x3d, 0xfc, 0x7e, 0x1e, 0x63, 0x06, 0x07, 0xa0,
0x00, 0x00, 0x20, 0x00, 0x30, 0x00, 0x1b, 0xf0, 0x3d, 0xfc, 0x7e, 0x1e, 0x63, 0x06, 0x07, 0xa0,
0x1f, 0xd8, 0x08, 0x60, 0x01, 0xb0, 0x03, 0xd8, 0x01, 0x8c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
// 'off', 16x16px
const unsigned char bitmap_off [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
// 'spoolman_on', 16x16px
const unsigned char bitmap_spoolman_on [] PROGMEM = {
0x03, 0xc0, 0x08, 0xf0, 0x20, 0xfc, 0x00, 0xfc, 0x40, 0xfe, 0x70, 0xf0, 0xf8, 0xc1, 0xff, 0xc1,
0x03, 0xc0, 0x08, 0xf0, 0x20, 0xfc, 0x00, 0xfc, 0x40, 0xfe, 0x70, 0xf0, 0xf8, 0xc1, 0xff, 0xc1,
0xff, 0xc1, 0xf9, 0xc1, 0x70, 0xf0, 0x40, 0xfe, 0x00, 0xfc, 0x20, 0xfc, 0x08, 0xf0, 0x03, 0xc0
};
// 'bambu_on', 16x16px
const unsigned char bitmap_bambu_on [] PROGMEM = {
0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x1c, 0x3e, 0x00, 0x3e, 0x40,
0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x1c, 0x3e, 0x00, 0x3e, 0x40,
0x30, 0x78, 0x00, 0x7c, 0x06, 0x7c, 0x1e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c, 0x3e, 0x7c
};
// 'scale_on', 16x16px
const unsigned char bitmap_scale_on [] PROGMEM = {
0x01, 0x80, 0x3f, 0xfc, 0x3f, 0xfc, 0x11, 0x88, 0x21, 0x84, 0x09, 0x90, 0x49, 0x92, 0x45, 0xa2,
0x05, 0xa1, 0xff, 0xbf, 0xfd, 0xbf, 0x79, 0x9e, 0x01, 0x80, 0x01, 0x80, 0x0f, 0xf0, 0x0f, 0xf8
};
// 'failed', 47x47px
const unsigned char icon_failed [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff,
0x00, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xc0, 0x00, 0x00, 0x1f, 0xfc, 0x7f, 0xf0, 0x00, 0x00, 0x7f,
0x80, 0x03, 0xf8, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x07, 0xc0, 0x00, 0x00, 0x0f, 0x80, 0x07, 0x80, 0x00, 0x00,
0x07, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x01, 0xe0, 0x1e, 0x03,
0x80, 0x07, 0x80, 0xf0, 0x3e, 0x03, 0xc0, 0x07, 0x80, 0xf0, 0x3c, 0x03, 0xe0, 0x0f, 0x80, 0x78,
0x3c, 0x01, 0xf0, 0x1f, 0x00, 0x78, 0x78, 0x00, 0xf8, 0x3e, 0x00, 0x38, 0x78, 0x00, 0x7c, 0x7c,
0x00, 0x3c, 0x78, 0x00, 0x3c, 0xf8, 0x00, 0x3c, 0x78, 0x00, 0x3f, 0xf0, 0x00, 0x3c, 0x70, 0x00,
0x1f, 0xf0, 0x00, 0x3c, 0x70, 0x00, 0x0f, 0xe0, 0x00, 0x3c, 0xf0, 0x00, 0x07, 0xc0, 0x00, 0x1c,
0xf0, 0x00, 0x0f, 0xe0, 0x00, 0x3c, 0x70, 0x00, 0x1f, 0xf0, 0x00, 0x3c, 0x78, 0x00, 0x3f, 0xf0,
0x00, 0x3c, 0x78, 0x00, 0x3e, 0xf8, 0x00, 0x3c, 0x78, 0x00, 0x7c, 0x7c, 0x00, 0x3c, 0x78, 0x00,
0xf8, 0x3e, 0x00, 0x3c, 0x3c, 0x01, 0xf0, 0x1f, 0x00, 0x78, 0x3c, 0x03, 0xe0, 0x0f, 0x80, 0x78,
0x3e, 0x03, 0xc0, 0x0f, 0x80, 0xf0, 0x1e, 0x03, 0x80, 0x07, 0x80, 0xf0, 0x1f, 0x00, 0x00, 0x00,
0x01, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x03, 0xe0, 0x07, 0x80, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0,
0x00, 0x00, 0x0f, 0xc0, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x7f, 0x80, 0x03, 0xfc, 0x00, 0x00, 0x1f, 0xf8, 0x3f,
0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x03, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff,
0x00, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xc0, 0x00, 0x00, 0x1f, 0xfc, 0x7f, 0xf0, 0x00, 0x00, 0x7f,
0x80, 0x03, 0xf8, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x07, 0xc0, 0x00, 0x00, 0x0f, 0x80, 0x07, 0x80, 0x00, 0x00,
0x07, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x1f, 0x00, 0x00, 0x00, 0x01, 0xe0, 0x1e, 0x03,
0x80, 0x07, 0x80, 0xf0, 0x3e, 0x03, 0xc0, 0x07, 0x80, 0xf0, 0x3c, 0x03, 0xe0, 0x0f, 0x80, 0x78,
0x3c, 0x01, 0xf0, 0x1f, 0x00, 0x78, 0x78, 0x00, 0xf8, 0x3e, 0x00, 0x38, 0x78, 0x00, 0x7c, 0x7c,
0x00, 0x3c, 0x78, 0x00, 0x3c, 0xf8, 0x00, 0x3c, 0x78, 0x00, 0x3f, 0xf0, 0x00, 0x3c, 0x70, 0x00,
0x1f, 0xf0, 0x00, 0x3c, 0x70, 0x00, 0x0f, 0xe0, 0x00, 0x3c, 0xf0, 0x00, 0x07, 0xc0, 0x00, 0x1c,
0xf0, 0x00, 0x0f, 0xe0, 0x00, 0x3c, 0x70, 0x00, 0x1f, 0xf0, 0x00, 0x3c, 0x78, 0x00, 0x3f, 0xf0,
0x00, 0x3c, 0x78, 0x00, 0x3e, 0xf8, 0x00, 0x3c, 0x78, 0x00, 0x7c, 0x7c, 0x00, 0x3c, 0x78, 0x00,
0xf8, 0x3e, 0x00, 0x3c, 0x3c, 0x01, 0xf0, 0x1f, 0x00, 0x78, 0x3c, 0x03, 0xe0, 0x0f, 0x80, 0x78,
0x3e, 0x03, 0xc0, 0x0f, 0x80, 0xf0, 0x1e, 0x03, 0x80, 0x07, 0x80, 0xf0, 0x1f, 0x00, 0x00, 0x00,
0x01, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x03, 0xe0, 0x07, 0x80, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0,
0x00, 0x00, 0x0f, 0xc0, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x7f, 0x80, 0x03, 0xfc, 0x00, 0x00, 0x1f, 0xf8, 0x3f,
0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x03, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00,
0x7f, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
// 'loading', 47x47px
const unsigned char icon_loading [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x80,
0x00, 0x00, 0x00, 0x00, 0x0f, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x07, 0xe0, 0x00, 0x00, 0x00, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00,
0x00, 0x01, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x07, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xfe,
0x00, 0x00, 0x00, 0x3f, 0xf9, 0xfc, 0x00, 0x00, 0x00, 0x7f, 0x83, 0xf8, 0x38, 0x00, 0x00, 0xff,
0x07, 0xf0, 0x7c, 0x00, 0x00, 0xfc, 0x07, 0xe0, 0x7e, 0x00, 0x01, 0xf8, 0x0f, 0xc0, 0x3f, 0x00,
0x03, 0xf0, 0x07, 0x80, 0x1f, 0x00, 0x03, 0xe0, 0x03, 0x00, 0x1f, 0x80, 0x07, 0xe0, 0x00, 0x00,
0x0f, 0x80, 0x07, 0xc0, 0x00, 0x00, 0x0f, 0xc0, 0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0, 0x0f, 0x80,
0x00, 0x00, 0x07, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0,
0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00,
0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80,
0x00, 0x00, 0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0,
0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xe0, 0x00, 0x00, 0x0f, 0x80, 0x03, 0xe0, 0x00, 0x00,
0x1f, 0x80, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00, 0x01, 0xfc,
0x00, 0x00, 0x7e, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xfc, 0x00, 0x00, 0x7f, 0x80, 0x07, 0xf8, 0x00,
0x00, 0x3f, 0xf0, 0x3f, 0xf0, 0x00, 0x00, 0x1f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x07, 0xff, 0xff,
0xc0, 0x00, 0x00, 0x01, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x80,
0x00, 0x00, 0x00, 0x00, 0x0f, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x07, 0xe0, 0x00, 0x00, 0x00, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00,
0x00, 0x01, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x07, 0xff, 0xfe, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xfe,
0x00, 0x00, 0x00, 0x3f, 0xf9, 0xfc, 0x00, 0x00, 0x00, 0x7f, 0x83, 0xf8, 0x38, 0x00, 0x00, 0xff,
0x07, 0xf0, 0x7c, 0x00, 0x00, 0xfc, 0x07, 0xe0, 0x7e, 0x00, 0x01, 0xf8, 0x0f, 0xc0, 0x3f, 0x00,
0x03, 0xf0, 0x07, 0x80, 0x1f, 0x00, 0x03, 0xe0, 0x03, 0x00, 0x1f, 0x80, 0x07, 0xe0, 0x00, 0x00,
0x0f, 0x80, 0x07, 0xc0, 0x00, 0x00, 0x0f, 0xc0, 0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0, 0x0f, 0x80,
0x00, 0x00, 0x07, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0,
0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00,
0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80, 0x00, 0x00, 0x03, 0xe0, 0x0f, 0x80,
0x00, 0x00, 0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0,
0x07, 0xc0, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xe0, 0x00, 0x00, 0x0f, 0x80, 0x03, 0xe0, 0x00, 0x00,
0x1f, 0x80, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00, 0x01, 0xfc,
0x00, 0x00, 0x7e, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xfc, 0x00, 0x00, 0x7f, 0x80, 0x07, 0xf8, 0x00,
0x00, 0x3f, 0xf0, 0x3f, 0xf0, 0x00, 0x00, 0x1f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x07, 0xff, 0xff,
0xc0, 0x00, 0x00, 0x01, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x00,
0x03, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
// 'success', 47x47px
const unsigned char icon_success [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff,
0x80, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x1f, 0xfc, 0x3f, 0xf0, 0x00, 0x00, 0x7f,
0x80, 0x03, 0xfc, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x03, 0xe0, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0, 0x00, 0x00,
0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x01, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x01, 0xf0, 0x1e, 0x00,
0x00, 0x00, 0x00, 0xf0, 0x1e, 0x00, 0x00, 0x00, 0xc0, 0xf8, 0x3c, 0x00, 0x00, 0x01, 0xe0, 0x78,
0x3c, 0x00, 0x00, 0x03, 0xe0, 0x78, 0x38, 0x00, 0x00, 0x03, 0xc0, 0x3c, 0x78, 0x00, 0x00, 0x07,
0xc0, 0x3c, 0x78, 0x00, 0x00, 0x0f, 0x80, 0x3c, 0x78, 0x00, 0x00, 0x1f, 0x00, 0x1c, 0x78, 0x00,
0x00, 0x1e, 0x00, 0x1c, 0x78, 0x0f, 0x00, 0x3e, 0x00, 0x1e, 0x78, 0x0f, 0x80, 0x7c, 0x00, 0x1e,
0x78, 0x0f, 0xc0, 0xf8, 0x00, 0x1e, 0x78, 0x07, 0xe0, 0xf0, 0x00, 0x1c, 0x78, 0x03, 0xf1, 0xf0,
0x00, 0x1c, 0x78, 0x01, 0xfb, 0xe0, 0x00, 0x3c, 0x78, 0x00, 0xff, 0xc0, 0x00, 0x3c, 0x38, 0x00,
0x7f, 0x80, 0x00, 0x3c, 0x3c, 0x00, 0x3f, 0x80, 0x00, 0x78, 0x3c, 0x00, 0x1f, 0x00, 0x00, 0x78,
0x1e, 0x00, 0x0e, 0x00, 0x00, 0xf8, 0x1e, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00,
0x01, 0xf0, 0x0f, 0x80, 0x00, 0x00, 0x01, 0xe0, 0x07, 0xc0, 0x00, 0x00, 0x03, 0xc0, 0x03, 0xe0,
0x00, 0x00, 0x07, 0xc0, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x7f, 0x80, 0x03, 0xfc, 0x00, 0x00, 0x1f, 0xfc, 0x3f,
0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x03, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xfc, 0x00, 0x00, 0x00, 0x03, 0xff, 0xff,
0x80, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x1f, 0xfc, 0x3f, 0xf0, 0x00, 0x00, 0x7f,
0x80, 0x03, 0xfc, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x03, 0xe0, 0x00, 0x00, 0x07, 0xc0, 0x07, 0xc0, 0x00, 0x00,
0x03, 0xc0, 0x0f, 0x80, 0x00, 0x00, 0x01, 0xe0, 0x0f, 0x00, 0x00, 0x00, 0x01, 0xf0, 0x1e, 0x00,
0x00, 0x00, 0x00, 0xf0, 0x1e, 0x00, 0x00, 0x00, 0xc0, 0xf8, 0x3c, 0x00, 0x00, 0x01, 0xe0, 0x78,
0x3c, 0x00, 0x00, 0x03, 0xe0, 0x78, 0x38, 0x00, 0x00, 0x03, 0xc0, 0x3c, 0x78, 0x00, 0x00, 0x07,
0xc0, 0x3c, 0x78, 0x00, 0x00, 0x0f, 0x80, 0x3c, 0x78, 0x00, 0x00, 0x1f, 0x00, 0x1c, 0x78, 0x00,
0x00, 0x1e, 0x00, 0x1c, 0x78, 0x0f, 0x00, 0x3e, 0x00, 0x1e, 0x78, 0x0f, 0x80, 0x7c, 0x00, 0x1e,
0x78, 0x0f, 0xc0, 0xf8, 0x00, 0x1e, 0x78, 0x07, 0xe0, 0xf0, 0x00, 0x1c, 0x78, 0x03, 0xf1, 0xf0,
0x00, 0x1c, 0x78, 0x01, 0xfb, 0xe0, 0x00, 0x3c, 0x78, 0x00, 0xff, 0xc0, 0x00, 0x3c, 0x38, 0x00,
0x7f, 0x80, 0x00, 0x3c, 0x3c, 0x00, 0x3f, 0x80, 0x00, 0x78, 0x3c, 0x00, 0x1f, 0x00, 0x00, 0x78,
0x1e, 0x00, 0x0e, 0x00, 0x00, 0xf8, 0x1e, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x0f, 0x00, 0x00, 0x00,
0x01, 0xf0, 0x0f, 0x80, 0x00, 0x00, 0x01, 0xe0, 0x07, 0xc0, 0x00, 0x00, 0x03, 0xc0, 0x03, 0xe0,
0x00, 0x00, 0x07, 0xc0, 0x03, 0xf0, 0x00, 0x00, 0x1f, 0x80, 0x01, 0xf8, 0x00, 0x00, 0x3f, 0x00,
0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x7f, 0x80, 0x03, 0xfc, 0x00, 0x00, 0x1f, 0xfc, 0x3f,
0xf0, 0x00, 0x00, 0x0f, 0xff, 0xff, 0xe0, 0x00, 0x00, 0x03, 0xff, 0xff, 0x80, 0x00, 0x00, 0x00,
0x7f, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
// 'transfer', 47x47px
const unsigned char icon_transfer [] PROGMEM = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0xe0, 0x01,
0xfe, 0x00, 0x00, 0x3f, 0xe0, 0x07, 0xff, 0x80, 0x00, 0xff, 0xc0, 0x0f, 0xff, 0xc0, 0x01, 0xfb,
0xc0, 0x1f, 0x03, 0xe0, 0x03, 0xe3, 0x80, 0x3c, 0x00, 0xf0, 0x07, 0xc3, 0x80, 0x78, 0x00, 0x78,
0x0f, 0x80, 0x00, 0x70, 0x00, 0x78, 0x0f, 0x00, 0x00, 0x70, 0x00, 0x38, 0x1e, 0x00, 0x00, 0xf0,
0x00, 0x3c, 0x1c, 0x00, 0x00, 0xe0, 0x00, 0x3c, 0x3c, 0x00, 0x00, 0xe0, 0x00, 0x1c, 0x38, 0x00,
0x00, 0xe0, 0x00, 0x3c, 0x38, 0x00, 0x00, 0xf0, 0x00, 0x3c, 0x38, 0x00, 0x00, 0x70, 0x00, 0x38,
0x38, 0x00, 0x00, 0x78, 0x00, 0x78, 0x38, 0x00, 0x00, 0x78, 0x00, 0x78, 0x30, 0x00, 0x00, 0x3c,
0x00, 0xf0, 0x00, 0x00, 0x00, 0x1f, 0x03, 0xe0, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xc0, 0x00, 0x00,
0x00, 0x07, 0xff, 0x80, 0x00, 0x00, 0x00, 0x01, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0xff, 0xc0, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xf0, 0x00, 0x00, 0x00, 0x1f, 0xff, 0xfc, 0x00,
0x00, 0x00, 0x1f, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x1e, 0x00, 0x00, 0x18, 0x38, 0x00,
0x0e, 0x00, 0x00, 0x1c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x1c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x3c,
0x38, 0x00, 0x0e, 0x00, 0x00, 0x3c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x38, 0x38, 0x00, 0x0e, 0x00,
0x00, 0x38, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x78, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x70, 0x38, 0x00,
0x0e, 0x00, 0x00, 0xf0, 0x38, 0x00, 0x0e, 0x00, 0x01, 0xe0, 0x38, 0x00, 0x0e, 0x01, 0x83, 0xe0,
0x38, 0x00, 0x0e, 0x03, 0x87, 0xc0, 0x3c, 0x00, 0x1e, 0x03, 0x9f, 0x80, 0x1f, 0x80, 0xfc, 0x07,
0xff, 0x00, 0x1f, 0xff, 0xf8, 0x07, 0xfc, 0x00, 0x07, 0xff, 0xf0, 0x0f, 0xf0, 0x00, 0x01, 0xff,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0xe0, 0x01,
0xfe, 0x00, 0x00, 0x3f, 0xe0, 0x07, 0xff, 0x80, 0x00, 0xff, 0xc0, 0x0f, 0xff, 0xc0, 0x01, 0xfb,
0xc0, 0x1f, 0x03, 0xe0, 0x03, 0xe3, 0x80, 0x3c, 0x00, 0xf0, 0x07, 0xc3, 0x80, 0x78, 0x00, 0x78,
0x0f, 0x80, 0x00, 0x70, 0x00, 0x78, 0x0f, 0x00, 0x00, 0x70, 0x00, 0x38, 0x1e, 0x00, 0x00, 0xf0,
0x00, 0x3c, 0x1c, 0x00, 0x00, 0xe0, 0x00, 0x3c, 0x3c, 0x00, 0x00, 0xe0, 0x00, 0x1c, 0x38, 0x00,
0x00, 0xe0, 0x00, 0x3c, 0x38, 0x00, 0x00, 0xf0, 0x00, 0x3c, 0x38, 0x00, 0x00, 0x70, 0x00, 0x38,
0x38, 0x00, 0x00, 0x78, 0x00, 0x78, 0x38, 0x00, 0x00, 0x78, 0x00, 0x78, 0x30, 0x00, 0x00, 0x3c,
0x00, 0xf0, 0x00, 0x00, 0x00, 0x1f, 0x03, 0xe0, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xc0, 0x00, 0x00,
0x00, 0x07, 0xff, 0x80, 0x00, 0x00, 0x00, 0x01, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0xff, 0xc0, 0x00, 0x00, 0x00, 0x0f, 0xff, 0xf0, 0x00, 0x00, 0x00, 0x1f, 0xff, 0xfc, 0x00,
0x00, 0x00, 0x1f, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x3c, 0x00, 0x1e, 0x00, 0x00, 0x18, 0x38, 0x00,
0x0e, 0x00, 0x00, 0x1c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x1c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x3c,
0x38, 0x00, 0x0e, 0x00, 0x00, 0x3c, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x38, 0x38, 0x00, 0x0e, 0x00,
0x00, 0x38, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x78, 0x38, 0x00, 0x0e, 0x00, 0x00, 0x70, 0x38, 0x00,
0x0e, 0x00, 0x00, 0xf0, 0x38, 0x00, 0x0e, 0x00, 0x01, 0xe0, 0x38, 0x00, 0x0e, 0x01, 0x83, 0xe0,
0x38, 0x00, 0x0e, 0x03, 0x87, 0xc0, 0x3c, 0x00, 0x1e, 0x03, 0x9f, 0x80, 0x1f, 0x80, 0xfc, 0x07,
0xff, 0x00, 0x1f, 0xff, 0xf8, 0x07, 0xfc, 0x00, 0x07, 0xff, 0xf0, 0x0f, 0xf0, 0x00, 0x01, 0xff,
0xc0, 0x07, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
+274
View File
@@ -0,0 +1,274 @@
#include "lang.h"
#include "config.h"
#include <Preferences.h>
Lang currentLang = LANG_EN;
// =====================================================================
// English strings
// =====================================================================
static const char EN_DISPLAY_INIT[] = "Display init";
static const char EN_WIFI_INIT[] = "WiFi init";
static const char EN_WEBSERVER_INIT[] = "Webserver init";
static const char EN_API_INIT[] = "API init";
static const char EN_NFC_INIT[] = "NFC init";
static const char EN_SEARCHING_SCALE[] = "Searching scale";
static const char EN_INIT_DONE[] = "Setup finished";
static const char EN_TARE_SCALE[] = "TARE Scale";
static const char EN_SCALE_NOT_CAL[] = "Scale not calibrated";
static const char EN_SCALE_CAL[] = "Scale Cal.";
static const char EN_EMPTY_SCALE[] = "Empty Scale";
static const char EN_PLACE_WEIGHT[] = "Place the weight";
static const char EN_REMOVE_WEIGHT[] = "Remove weight";
static const char EN_COMPLETED[] = "Completed";
static const char EN_CAL_ERROR[] = "Calibration error";
static const char EN_HX711_NOT_FOUND[] = "HX711 not found";
static const char EN_READING[] = "Reading";
static const char EN_DECODING_DATA[] = "Decoding data";
static const char EN_SPOOL_TAG[] = "Spool Tag";
static const char EN_WEIGHING[] = "Weighing...";
static const char EN_WEIGHT_STABLE[] = "Weight stable";
static const char EN_SENDING[] = "Sending...";
static const char EN_TAG_WRITTEN[] = "Tag written";
static const char EN_WRITING[] = "Writing";
static const char EN_WRITE_TAG[] = "Write Tag";
static const char EN_DONE[] = "Done!";
static const char EN_PLACE_TAG_NOW[] = "Place tag now";
static const char EN_DETECTING_TAG[] = "Detecting tag";
static const char EN_KNOWN_SPOOL[] = "Known Spool";
static const char EN_QUICK_MODE[] = "Quick mode";
static const char EN_LOCATION[] = "Location";
static const char EN_LOCATION_SET[] = "Location set";
static const char EN_SCAN_SPOOL_FIRST[] = "Scan spool first";
static const char EN_WAIT_FMT[] = "Wait... %ds";
static const char EN_NOT_REGISTERED[] = "Not Registered";
static const char EN_API_CONN_LOST[] = "API Connection Lost";
static const char EN_API_ERROR[] = "API Error";
static const char EN_API_OFFLINE[] = "API offline";
static const char EN_WEIGHT_SENT_REST[] = "Weight sent, rest:";
static const char EN_FAILURE[] = "Failure";
static const char EN_FAILURE_EXCL[] = "Failure!";
static const char EN_UNKNOWN_TAG[] = "Unknown tag";
static const char EN_UNKNOWN_TAG_TYPE[] = "Unknown tag type";
static const char EN_NO_TAG_FOUND[] = "No tag found";
static const char EN_NFC_BUSY[] = "NFC busy!";
static const char EN_TAG_READ_ERROR[] = "Tag read error";
static const char EN_TAG_TOO_SMALL[] = "Tag too small for data";
static const char EN_NFC_RESET_FAIL[] = "NFC Reset failed";
static const char EN_TAG_LOST_RESET[] = "Tag lost after reset";
static const char EN_NFC_STILL_BROKEN[] = "NFC still broken";
static const char EN_TAG_DEFECT[] = "Tag/Interface defect";
static const char EN_TEST_READ_ERROR[] = "Test page read error";
static const char EN_TAG_REMOVED[] = "Tag removed";
static const char EN_TAG_WRITE_PROT[] = "Tag write protected?";
static const char EN_TEST_VERIFY_FAIL[] = "Test verify failed";
static const char EN_NDEF_INIT_FAIL[] = "NDEF init failed";
static const char EN_NFC_UNSTABLE[] = "NFC Interface unstable";
static const char EN_MEMORY_ERROR[] = "Memory error";
static const char EN_NO_RFID_BOARD[] = "No RFID Board found";
static const char EN_WIFI_CONFIG[] = "WiFi Config Mode";
static const char EN_WIFI_NOT_CONN[] = "WiFi not connected Check Portal";
static const char EN_WIFI_RECONN[] = "WiFi reconnecting";
static const char EN_UPDATE[] = "Update";
static const char EN_DOWNLOAD[] = "Download";
static const char EN_NOSCALE_MODE[] = "Activate NFC-only mode";
static const char EN_NOSCALE_PROMPT[] = "ready...";
// =====================================================================
// German strings
// =====================================================================
static const char DE_DISPLAY_INIT[] = "Display init";
static const char DE_WIFI_INIT[] = "WiFi init";
static const char DE_WEBSERVER_INIT[] = "Webserver init";
static const char DE_API_INIT[] = "API init";
static const char DE_NFC_INIT[] = "NFC init";
static const char DE_SEARCHING_SCALE[] = "Suche Waage";
static const char DE_INIT_DONE[] = "Setup abgeschlossen";
static const char DE_TARE_SCALE[] = "Waage tarieren";
static const char DE_SCALE_NOT_CAL[] = "Waage nicht kalibriert";
static const char DE_SCALE_CAL[] = "Kalibrieren";
static const char DE_EMPTY_SCALE[] = "Waage leeren";
static const char DE_PLACE_WEIGHT[] = "Gewicht auflegen";
static const char DE_REMOVE_WEIGHT[] = "Gewicht entfernen";
static const char DE_COMPLETED[] = "Abgeschlossen";
static const char DE_CAL_ERROR[] = "Kalibrierungsfehler";
static const char DE_HX711_NOT_FOUND[] = "HX711 nicht gefunden";
static const char DE_READING[] = "Lesen";
static const char DE_DECODING_DATA[] = "Daten dekodieren";
static const char DE_SPOOL_TAG[] = "Spulen-Tag";
static const char DE_WEIGHING[] = "Wiegen...";
static const char DE_WEIGHT_STABLE[] = "Gewicht stabil";
static const char DE_SENDING[] = "Senden...";
static const char DE_TAG_WRITTEN[] = "Tag beschrieben";
static const char DE_WRITING[] = "Schreiben";
static const char DE_WRITE_TAG[] = "Tag schreiben";
static const char DE_DONE[] = "Fertig!";
static const char DE_PLACE_TAG_NOW[] = "Tag jetzt auflegen";
static const char DE_DETECTING_TAG[] = "Tag erkennen";
static const char DE_KNOWN_SPOOL[] = "Bekannte Spule";
static const char DE_QUICK_MODE[] = "Schnellmodus";
static const char DE_LOCATION[] = "Standort";
static const char DE_LOCATION_SET[] = "Standort gesetzt";
static const char DE_SCAN_SPOOL_FIRST[] = "Zuerst Spule scannen";
static const char DE_WAIT_FMT[] = "Warte... %ds";
static const char DE_NOT_REGISTERED[] = "Nicht registriert";
static const char DE_API_CONN_LOST[] = "API-Verbindung weg";
static const char DE_API_ERROR[] = "API-Fehler";
static const char DE_API_OFFLINE[] = "API offline";
static const char DE_WEIGHT_SENT_REST[] = "Gesendet, Rest:";
static const char DE_FAILURE[] = "Fehler";
static const char DE_FAILURE_EXCL[] = "Fehler!";
static const char DE_UNKNOWN_TAG[] = "Unbekannter Tag";
static const char DE_UNKNOWN_TAG_TYPE[] = "Unbekannter Tagtyp";
static const char DE_NO_TAG_FOUND[] = "Kein Tag gefunden";
static const char DE_NFC_BUSY[] = "NFC belegt!";
static const char DE_TAG_READ_ERROR[] = "Tag-Lesefehler";
static const char DE_TAG_TOO_SMALL[] = "Tag zu klein";
static const char DE_NFC_RESET_FAIL[] = "NFC-Reset fehlgeschl.";
static const char DE_TAG_LOST_RESET[] = "Tag nach Reset weg";
static const char DE_NFC_STILL_BROKEN[] = "NFC immer noch defekt";
static const char DE_TAG_DEFECT[] = "Tag/Interface defekt";
static const char DE_TEST_READ_ERROR[] = "Testseite Lesefehler";
static const char DE_TAG_REMOVED[] = "Tag entfernt";
static const char DE_TAG_WRITE_PROT[] = "Tag schreibgeschuetzt";
static const char DE_TEST_VERIFY_FAIL[] = "Test fehlgeschlagen";
static const char DE_NDEF_INIT_FAIL[] = "NDEF-Init Fehler";
static const char DE_NFC_UNSTABLE[] = "NFC instabil";
static const char DE_MEMORY_ERROR[] = "Speicherfehler";
static const char DE_NO_RFID_BOARD[] = "Kein RFID-Board";
static const char DE_WIFI_CONFIG[] = "WiFi Konfig-Modus";
static const char DE_WIFI_NOT_CONN[] = "WiFi nicht verbunden Portal pruefen";
static const char DE_WIFI_RECONN[] = "WiFi Neuverbindung";
static const char DE_UPDATE[] = "Update";
static const char DE_DOWNLOAD[] = "Download";
static const char DE_NOSCALE_MODE[] = "Aktiviere NFC-only Modus";
static const char DE_NOSCALE_PROMPT[] = "bereit...";
// =====================================================================
// String table: [StringID][Lang]
// =====================================================================
static const char* const stringTable[STR_COUNT][LANG_COUNT] = {
// Boot / Init
{ EN_DISPLAY_INIT, DE_DISPLAY_INIT },
{ EN_WIFI_INIT, DE_WIFI_INIT },
{ EN_WEBSERVER_INIT, DE_WEBSERVER_INIT },
{ EN_API_INIT, DE_API_INIT },
{ EN_NFC_INIT, DE_NFC_INIT },
{ EN_SEARCHING_SCALE, DE_SEARCHING_SCALE },
{ EN_INIT_DONE, DE_INIT_DONE },
// Scale
{ EN_TARE_SCALE, DE_TARE_SCALE },
{ EN_SCALE_NOT_CAL, DE_SCALE_NOT_CAL },
{ EN_SCALE_CAL, DE_SCALE_CAL },
{ EN_EMPTY_SCALE, DE_EMPTY_SCALE },
{ EN_PLACE_WEIGHT, DE_PLACE_WEIGHT },
{ EN_REMOVE_WEIGHT, DE_REMOVE_WEIGHT },
{ EN_COMPLETED, DE_COMPLETED },
{ EN_CAL_ERROR, DE_CAL_ERROR },
{ EN_HX711_NOT_FOUND, DE_HX711_NOT_FOUND },
// NFC / Spool
{ EN_READING, DE_READING },
{ EN_DECODING_DATA, DE_DECODING_DATA },
{ EN_SPOOL_TAG, DE_SPOOL_TAG },
{ EN_WEIGHING, DE_WEIGHING },
{ EN_WEIGHT_STABLE, DE_WEIGHT_STABLE },
{ EN_SENDING, DE_SENDING },
{ EN_TAG_WRITTEN, DE_TAG_WRITTEN },
{ EN_WRITING, DE_WRITING },
{ EN_WRITE_TAG, DE_WRITE_TAG },
{ EN_DONE, DE_DONE },
{ EN_PLACE_TAG_NOW, DE_PLACE_TAG_NOW },
{ EN_DETECTING_TAG, DE_DETECTING_TAG },
{ EN_KNOWN_SPOOL, DE_KNOWN_SPOOL },
{ EN_QUICK_MODE, DE_QUICK_MODE },
{ EN_LOCATION, DE_LOCATION },
{ EN_LOCATION_SET, DE_LOCATION_SET },
{ EN_SCAN_SPOOL_FIRST, DE_SCAN_SPOOL_FIRST },
{ EN_WAIT_FMT, DE_WAIT_FMT },
// Connection / API
{ EN_NOT_REGISTERED, DE_NOT_REGISTERED },
{ EN_API_CONN_LOST, DE_API_CONN_LOST },
{ EN_API_ERROR, DE_API_ERROR },
{ EN_API_OFFLINE, DE_API_OFFLINE },
{ EN_WEIGHT_SENT_REST, DE_WEIGHT_SENT_REST },
// Errors
{ EN_FAILURE, DE_FAILURE },
{ EN_FAILURE_EXCL, DE_FAILURE_EXCL },
{ EN_UNKNOWN_TAG, DE_UNKNOWN_TAG },
{ EN_UNKNOWN_TAG_TYPE, DE_UNKNOWN_TAG_TYPE },
{ EN_NO_TAG_FOUND, DE_NO_TAG_FOUND },
{ EN_NFC_BUSY, DE_NFC_BUSY },
{ EN_TAG_READ_ERROR, DE_TAG_READ_ERROR },
{ EN_TAG_TOO_SMALL, DE_TAG_TOO_SMALL },
{ EN_NFC_RESET_FAIL, DE_NFC_RESET_FAIL },
{ EN_TAG_LOST_RESET, DE_TAG_LOST_RESET },
{ EN_NFC_STILL_BROKEN, DE_NFC_STILL_BROKEN },
{ EN_TAG_DEFECT, DE_TAG_DEFECT },
{ EN_TEST_READ_ERROR, DE_TEST_READ_ERROR },
{ EN_TAG_REMOVED, DE_TAG_REMOVED },
{ EN_TAG_WRITE_PROT, DE_TAG_WRITE_PROT },
{ EN_TEST_VERIFY_FAIL, DE_TEST_VERIFY_FAIL },
{ EN_NDEF_INIT_FAIL, DE_NDEF_INIT_FAIL },
{ EN_NFC_UNSTABLE, DE_NFC_UNSTABLE },
{ EN_MEMORY_ERROR, DE_MEMORY_ERROR },
{ EN_NO_RFID_BOARD, DE_NO_RFID_BOARD },
// WiFi
{ EN_WIFI_CONFIG, DE_WIFI_CONFIG },
{ EN_WIFI_NOT_CONN, DE_WIFI_NOT_CONN },
{ EN_WIFI_RECONN, DE_WIFI_RECONN },
// OTA
{ EN_UPDATE, DE_UPDATE },
{ EN_DOWNLOAD, DE_DOWNLOAD },
// No-Scale mode
{ EN_NOSCALE_MODE, DE_NOSCALE_MODE },
{ EN_NOSCALE_PROMPT, DE_NOSCALE_PROMPT },
};
const char* tr(StringID id) {
if (id >= STR_COUNT) return "???";
return stringTable[id][currentLang];
}
void loadLanguage() {
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, true);
currentLang = (Lang)preferences.getUChar(NVS_KEY_LANGUAGE, LANG_EN);
if (currentLang >= LANG_COUNT) currentLang = LANG_EN;
preferences.end();
Serial.printf("Language loaded: %s\n", getLangCode());
}
void saveLanguage(Lang lang) {
if (lang >= LANG_COUNT) return;
currentLang = lang;
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, false);
preferences.putUChar(NVS_KEY_LANGUAGE, (uint8_t)lang);
preferences.end();
Serial.printf("Language saved: %s\n", getLangCode());
}
const char* getLangCode() {
return (currentLang == LANG_DE) ? "de" : "en";
}
+115
View File
@@ -0,0 +1,115 @@
#ifndef LANG_H
#define LANG_H
#include <Arduino.h>
// Supported languages
enum Lang : uint8_t {
LANG_EN = 0,
LANG_DE = 1,
LANG_COUNT
};
// String IDs for all translatable display texts
enum StringID : uint8_t {
// Boot / Init
STR_DISPLAY_INIT,
STR_WIFI_INIT,
STR_WEBSERVER_INIT,
STR_API_INIT,
STR_NFC_INIT,
STR_SEARCHING_SCALE,
STR_INIT_DONE,
// Scale
STR_TARE_SCALE,
STR_SCALE_NOT_CALIBRATED,
STR_SCALE_CAL,
STR_EMPTY_SCALE,
STR_PLACE_WEIGHT,
STR_REMOVE_WEIGHT,
STR_COMPLETED,
STR_CALIBRATION_ERROR,
STR_HX711_NOT_FOUND,
// NFC / Spool
STR_READING,
STR_DECODING_DATA,
STR_SPOOL_TAG,
STR_WEIGHING,
STR_WEIGHT_STABLE,
STR_SENDING,
STR_TAG_WRITTEN,
STR_WRITING,
STR_WRITE_TAG,
STR_DONE,
STR_PLACE_TAG_NOW,
STR_DETECTING_TAG,
STR_KNOWN_SPOOL,
STR_QUICK_MODE,
STR_LOCATION,
STR_LOCATION_SET,
STR_SCAN_SPOOL_FIRST,
STR_WAIT_FMT, // format string: "Wait... %ds" / "Warte... %ds"
// Connection / API
STR_NOT_REGISTERED,
STR_API_CONN_LOST,
STR_API_ERROR,
STR_API_OFFLINE,
STR_WEIGHT_SENT_REST,
// Errors
STR_FAILURE,
STR_FAILURE_EXCL,
STR_UNKNOWN_TAG,
STR_UNKNOWN_TAG_TYPE,
STR_NO_TAG_FOUND,
STR_NFC_BUSY,
STR_TAG_READ_ERROR,
STR_TAG_TOO_SMALL,
STR_NFC_RESET_FAILED,
STR_TAG_LOST_RESET,
STR_NFC_STILL_BROKEN,
STR_TAG_DEFECT,
STR_TEST_READ_ERROR,
STR_TAG_REMOVED,
STR_TAG_WRITE_PROT,
STR_TEST_VERIFY_FAIL,
STR_NDEF_INIT_FAILED,
STR_NFC_UNSTABLE,
STR_MEMORY_ERROR,
STR_NO_RFID_BOARD,
// WiFi
STR_WIFI_CONFIG_MODE,
STR_WIFI_NOT_CONNECTED,
STR_WIFI_RECONNECTING,
// OTA
STR_UPDATE,
STR_DOWNLOAD,
// No-Scale mode
STR_NOSCALE_MODE,
STR_NOSCALE_PROMPT,
STR_COUNT // must be last
};
// Current language (default: English)
extern Lang currentLang;
// Get translated string by ID
const char* tr(StringID id);
// Load language setting from NVS
void loadLanguage();
// Save language setting to NVS
void saveLanguage(Lang lang);
// Get current language as string ("en" or "de")
const char* getLangCode();
#endif
+109 -84
View File
@@ -13,6 +13,7 @@
#include "scale.h"
#include "esp_task_wdt.h"
#include "commonFS.h"
#include "lang.h"
bool mainTaskWasPaused = 0;
uint8_t scaleTareCounter = 0;
@@ -32,6 +33,9 @@ void setup() {
// Initialize SPIFFS
initializeFileSystem();
// Load language setting from NVS (before display init)
loadLanguage();
// Start Display
setupDisplay();
@@ -49,7 +53,7 @@ void setup() {
// Touch Sensor
pinMode(TTP223_PIN, INPUT_PULLUP);
if (digitalRead(TTP223_PIN) == LOW)
if (digitalRead(TTP223_PIN) == LOW)
{
Serial.println("Touch Sensor is connected");
touchSensorConnected = true;
@@ -57,15 +61,24 @@ void setup() {
// Scale
start_scale(touchSensorConnected);
scaleTareRequest = true;
if (scaleConnected){
scaleTareRequest = true;
}
// WDT initialisieren mit 10 Sekunden Timeout
bool panic = true; // Wenn true, löst ein WDT-Timeout einen System-Panik aus
esp_task_wdt_init(10, panic);
booting = false;
oledShowProgressBar(6, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_INIT_DONE));
// Aktuellen Task (loopTask) zum Watchdog hinzufügen
esp_task_wdt_add(NULL);
if ( !scaleConnected ) {
// Clear Display after Boot
oledDisplayText(tr(STR_NOSCALE_PROMPT));
}
}
@@ -100,89 +113,84 @@ const unsigned long debounceDelay = 500; // 500 ms debounce delay
unsigned long lastConnErrorShowTime = 0;
const unsigned long connErrorShowInterval = 10000; // Show connection error every 10 seconds if exists
bool showingConnError = false;
unsigned long connErrorStartTime = 0;
const unsigned long connErrorDisplayDuration = 3000;
// ##### PROGRAM START #####
void loop() {
unsigned long currentMillis = millis();
// Handle connection errors (not registered or not connected)
if (!showingConnError && intervalElapsed(currentMillis, lastConnErrorShowTime, connErrorShowInterval)) {
if (!filamanRegistered) {
oledShowConnectionError("Not Registered", WiFi.localIP().toString());
showingConnError = true;
connErrorStartTime = currentMillis;
if (intervalElapsed(currentMillis, lastConnErrorShowTime, connErrorShowInterval)) {
if (!filamanRegistered && oledCanUpdate(DISPLAY_PRIORITY_WARNING)) {
oledShowConnectionError(tr(STR_NOT_REGISTERED), WiFi.localIP().toString());
oledSetPriority(DISPLAY_PRIORITY_WARNING, 3000);
mainTaskWasPaused = true;
} else if (!filamanConnected) {
oledShowConnectionError("API Connection Lost", WiFi.localIP().toString());
showingConnError = true;
connErrorStartTime = currentMillis;
} else if (!filamanConnected && oledCanUpdate(DISPLAY_PRIORITY_WARNING)) {
oledShowConnectionError(tr(STR_API_CONN_LOST), WiFi.localIP().toString());
oledSetPriority(DISPLAY_PRIORITY_WARNING, 3000);
mainTaskWasPaused = true;
} else if ( !scaleConnected ){
// everything fine again: without scale manual clearing of the error msg is needed
oledDisplayText(tr(STR_NOSCALE_PROMPT));
}
}
// Clear connection error after duration
if (showingConnError && currentMillis - connErrorStartTime >= connErrorDisplayDuration) {
showingConnError = false;
// Force UI refresh next cycle
lastTopRowUpdateTime = 0;
}
// Skip the rest of the loop while showing error to avoid UI overwriting
if (showingConnError) {
esp_task_wdt_reset();
return;
}
// Überprüfe den Status des Touch Sensors
if (touchSensorConnected && digitalRead(TTP223_PIN) == HIGH && currentMillis - lastButtonPress > debounceDelay)
// Überprüfe den Status des Touch Sensors (nur wenn Waage vorhanden)
if (scaleConnected && touchSensorConnected && digitalRead(TTP223_PIN) == HIGH && currentMillis - lastButtonPress > debounceDelay)
{
lastButtonPress = currentMillis;
scaleTareRequest = true;
oledResetActivityTimer(); // Wake display on touch press
}
// Überprüfe regelmäßig die WLAN-Verbindung
if (intervalElapsed(currentMillis, lastWifiCheckTime, WIFI_CHECK_INTERVAL))
if (intervalElapsed(currentMillis, lastWifiCheckTime, WIFI_CHECK_INTERVAL))
{
checkWiFiConnection();
}
// Periodic display update
if (intervalElapsed(currentMillis, lastTopRowUpdateTime, DISPLAY_UPDATE_INTERVAL))
if (intervalElapsed(currentMillis, lastTopRowUpdateTime, DISPLAY_UPDATE_INTERVAL))
{
oledShowTopRow();
// Clean up dead websocket clients periodically instead of on connect
if(currentMillis % 10000 < 50) ws.cleanupClients();
oledCheckSleep(); // Put display to sleep if timeout elapsed
}
// WebSocket Cleanup alle 5 Sekunden (häufiger als vorher)
// Tote Clients können WiFi-Ressourcen blockieren
static unsigned long lastWsCleanup = 0;
if (currentMillis - lastWsCleanup >= 5000) {
ws.cleanupClients();
lastWsCleanup = currentMillis;
}
// Periodic FilaMan heartbeat
if (intervalElapsed(currentMillis, lastFilamanHeartbeatTime, FILAMAN_HEARTBEAT_INTERVAL))
if (intervalElapsed(currentMillis, lastFilamanHeartbeatTime, FILAMAN_HEARTBEAT_INTERVAL))
{
sendHeartbeatAsync();
}
// If scale is not calibrated, only show a warning
if (!scaleCalibrated)
if (scaleConnected && !scaleCalibrated)
{
// Do not show the warning if the calibratin process is onging
if(!scaleCalibrationActive){
oledDisplayText("Scale not calibrated");
oledDisplayText(tr(STR_SCALE_NOT_CALIBRATED));
vTaskDelay(pdMS_TO_TICKS(1000));
}
}
else
}
if (scaleConnected && scaleCalibrated)
{
// Ausgabe der Waage auf Display
// Block weight display during NFC write operations
if(pauseMainTask == 0 && !nfcWriteInProgress)
// Block weight display during NFC write operations and higher-priority display messages
if(pauseMainTask == 0 && !nfcWriteInProgress && oledCanUpdate(DISPLAY_PRIORITY_STATUS))
{
// Use filtered weight for smooth display, but still check API weight for significant changes
int16_t displayWeight = getFilteredDisplayWeight();
if (mainTaskWasPaused || (weight != lastWeight && (nfcReaderState == NFC_IDLE || tagProcessed)))
{
(displayWeight < 2) ? ((displayWeight < -2) ? oledDisplayText("!! -0") : oledShowWeight(0)) : oledShowWeight(displayWeight);
oledShowWeight((abs(displayWeight) < 2) ? 0 : displayWeight);
oledSetPriority(DISPLAY_PRIORITY_STATUS, 0); // Weight can always be overwritten
}
mainTaskWasPaused = false;
}
@@ -191,9 +199,17 @@ void loop() {
mainTaskWasPaused = true;
}
// Während eines expliziten Scan-Requests darf kein regulärer Wiegevorgang
// an das Backend gesendet werden.
if (scanRequestActive) {
weightCounterToApi = 0;
weightSend = 0;
lastWeight = weight;
}
// Wenn Timer abgelaufen und nicht gerade ein RFID-Tag geschrieben wird
if (currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState < NFC_WRITING)
if (!scanRequestActive && currentMillis - lastWeightReadTime >= weightReadInterval && nfcReaderState < NFC_WRITING)
{
lastWeightReadTime = currentMillis;
@@ -201,59 +217,68 @@ void loop() {
if (abs(weight - lastWeight) <= 2 && weight > 5)
{
weightCounterToApi++;
}
else
// Show stable weight feedback when approaching send threshold
if (weightCounterToApi == 3 && nfcReaderState == NFC_READ_SUCCESS && !tagProcessed && weightSend == 0) {
oledShowProgressBar(2, 4, tr(STR_SPOOL_TAG), tr(STR_WEIGHT_STABLE));
oledSetPriority(DISPLAY_PRIORITY_INFO, 1000);
}
}
else
{
// Show visual feedback when tag is present and weight is unstable
if (weightCounterToApi > 0 && nfcReaderState == NFC_READ_SUCCESS && !tagProcessed && weightSend == 0) {
oledShowProgressBar(1, 4, tr(STR_SPOOL_TAG), tr(STR_WEIGHING));
oledSetPriority(DISPLAY_PRIORITY_INFO, 1000);
}
weightCounterToApi = 0;
weightSend = 0;
}
}
lastWeight = weight;
lastWeight = weight;
// Wenn ein Tag erkannt wurde und das Gewicht stabil ist, an FilaMan senden
if (weightCounterToApi > 1 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Check if it's a Bambu tag - if so, send only UUID without spoolId
if (isBambuTag) {
sendWeightAsync(0, activeTagUuid, weight);
Serial.println("Bambu weight queued for FilaMan (UUID only)");
} else {
// Normal NTAG: send spoolId + UUID
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
Serial.println("Weight queued for FilaMan");
}
weightSend = 1;
// Feedback to user
pauseMainTask = 1;
oledShowProgressBar(3, 4, "Spool Tag", "Sending...");
}
// Wenn ein Tag erkannt wurde und das Gewicht stabil ist (4+ seconds), an FilaMan senden
if (!scanRequestActive && weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Handle successful tag write
if (nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Only send weight if a valid spoolId exists (spool tag, not location tag)
if (activeSpoolId.length() > 0 && activeSpoolId != "0") {
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
// Check if it's a Bambu tag - if so, send only UUID without spoolId
if (isBambuTag) {
sendWeightAsync(0, activeTagUuid, weight);
Serial.println("Bambu weight queued for FilaMan (UUID only)");
} else {
// Normal NTAG: send spoolId + UUID
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
Serial.println("Weight queued for FilaMan");
}
weightSend = 1;
Serial.println("Weight queued for FilaMan after spool tag write");
// Feedback to user
pauseMainTask = 1;
oledShowProgressBar(3, 4, "Tag written", "Sending...");
} else {
// Location tag written - no weight to send
Serial.println("Location tag written successfully - no weight send needed");
oledShowProgressBar(3, 4, tr(STR_SPOOL_TAG), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
}
// Handle successful tag write
if (!scanRequestActive && nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Only send weight if a valid spoolId exists (spool tag, not location tag)
if (activeSpoolId.length() > 0 && activeSpoolId != "0") {
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
weightSend = 1;
Serial.println("Weight queued for FilaMan after spool tag write");
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_TAG_WRITTEN), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
} else {
// Location tag written - no weight to send
Serial.println("Location tag written successfully - no weight send needed");
}
}
}
}
esp_task_wdt_reset();
}
+567 -351
View File
File diff suppressed because it is too large. Load diff
+2
View File
@@ -28,6 +28,7 @@ void scanRfidTask(void * parameter);
void startWriteJsonToTag(const bool isSpoolTag, const char* payload, int spoolId = 0, int locationId = 0);
bool quickSpoolIdCheck(String uidString);
bool readCompleteJsonForFastPath(); // Read complete JSON data for fast-path web interface display
void setScanRequest(bool active);
extern TaskHandle_t RfidReaderTask;
extern String nfcJsonData;
@@ -36,6 +37,7 @@ extern String activeTagUuid;
extern String lastSpoolId;
extern volatile nfcReaderStateType nfcReaderState;
extern volatile bool nfcWriteInProgress;
extern volatile bool scanRequestActive;
extern bool tagProcessed;
extern bool isBambuTag;
+33 -25
View File
@@ -3,6 +3,7 @@
#include <commonFS.h>
#include "scale.h"
#include "nfc.h"
#include "lang.h"
// Globale Variablen für Config Backups hinzufügen
@@ -15,6 +16,7 @@ static int currentUpdateCommand = 0;
static size_t updateTotalSize = 0;
static size_t updateWritten = 0;
static bool isSpiffsUpdate = false;
static size_t lastYieldAt = 0; // Für WiFi-Yield während großer Uploads
/**
* Compares two version strings and determines if version1 is less than version2
@@ -63,11 +65,18 @@ void espRestart() {
void sendUpdateProgress(int progress, const char* status = nullptr, const char* message = nullptr) {
static int lastSentProgress = -1;
static unsigned long lastSendTime = 0;
// Verhindere zu häufige Updates
unsigned long now = millis();
// Verhindere zu häufige Updates - mindestens 500ms zwischen Progress-Updates
// Dies reduziert WebSocket-Traffic während des Uploads erheblich
if (progress == lastSentProgress && !status && !message) {
return;
}
if (now - lastSendTime < 500 && progress < 100 && !status) {
return; // Throttle normale Progress-Updates
}
String progressMsg = "{\"type\":\"updateProgress\",\"progress\":" + String(progress);
if (status) {
@@ -78,23 +87,13 @@ void sendUpdateProgress(int progress, const char* status = nullptr, const char*
}
progressMsg += "}";
if (progress >= 100) {
// Sende die Nachricht nur einmal für den Abschluss
ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
delay(50);
}
// Sende die Nachricht mehrmals mit Verzögerung für wichtige Updates
if (status || abs(progress - lastSentProgress) >= 10 || progress == 100) {
for (int i = 0; i < 2; i++) {
ws.textAll(progressMsg);
delay(100); // Längerer Delay zwischen Nachrichten
}
} else {
ws.textAll(progressMsg);
delay(50);
}
// Sende Progress-Update (nur einmal, nicht mehrfach)
ws.textAll(progressMsg);
// Yield für WiFi-Stack nach jedem WebSocket-Send
vTaskDelay(pdMS_TO_TICKS(10));
lastSendTime = now;
lastSentProgress = progress;
}
@@ -131,6 +130,7 @@ void handleUpdate(AsyncWebServer &server) {
if (!index) {
updateTotalSize = request->contentLength();
updateWritten = 0;
lastYieldAt = 0; // Reset yield counter
isSpiffsUpdate = (filename.indexOf("website") > -1);
if (isSpiffsUpdate) {
@@ -146,14 +146,14 @@ void handleUpdate(AsyncWebServer &server) {
return;
}
sendUpdateProgress(5, "starting", "Starting SPIFFS update...");
vTaskDelay(pdMS_TO_TICKS(200));
vTaskDelay(pdMS_TO_TICKS(100));
} else {
if (!Update.begin(updateTotalSize)) {
request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
return;
}
sendUpdateProgress(0, "starting", "Starting firmware update...");
vTaskDelay(pdMS_TO_TICKS(200));
vTaskDelay(pdMS_TO_TICKS(100));
}
}
@@ -164,22 +164,30 @@ void handleUpdate(AsyncWebServer &server) {
}
updateWritten += len;
// KRITISCH: Yield alle 32KB für WiFi-Stack bei großen Uploads (1.5-2MB)
// Ohne dies kann der WiFi-Stack blockieren und der Upload hängen bleiben
if (updateWritten - lastYieldAt >= 32768) {
vTaskDelay(pdMS_TO_TICKS(5)); // Kurze Pause für WiFi-Stack
lastYieldAt = updateWritten;
}
int currentProgress;
// Berechne den Fortschritt basierend auf dem Update-Typ
if (isSpiffsUpdate) {
// SPIFFS: 5-75% für Upload
currentProgress = 6 + (updateWritten * 100) / updateTotalSize;
// SPIFFS: 5-100% für Upload
currentProgress = 5 + (updateWritten * 95) / updateTotalSize;
} else {
// Firmware: 0-100% für Upload
currentProgress = 1 + (updateWritten * 100) / updateTotalSize;
currentProgress = (updateWritten * 100) / updateTotalSize;
}
static int lastProgress = -1;
if (currentProgress != lastProgress && (currentProgress % 10 == 0 || final)) {
// Nur alle 5% Progress-Updates senden (reduziert WebSocket-Traffic)
if (currentProgress != lastProgress && (currentProgress % 5 == 0 || final)) {
sendUpdateProgress(currentProgress, "uploading");
oledShowProgressBar(currentProgress, 100, "Update", "Download");
vTaskDelay(pdMS_TO_TICKS(50));
oledShowProgressBar(currentProgress, 100, tr(STR_UPDATE), tr(STR_DOWNLOAD));
lastProgress = currentProgress;
}
}
+181 -68
View File
@@ -7,6 +7,7 @@
#include "display.h"
#include "esp_task_wdt.h"
#include <Preferences.h>
#include "lang.h"
HX711 scale;
@@ -34,10 +35,22 @@ uint8_t scale_tare_counter = 0;
bool scaleTareRequest = false;
uint8_t pauseMainTask = 0;
bool scaleCalibrated;
bool scaleConnected;
bool autoTare = true;
bool scaleCalibrationActive = false;
volatile bool scaleCalibrationRequest = false;
/**
* Non blocking wait function
*/
void friendlyWait(uint16_t ticks) {
for (uint16_t i = 0; i < ticks; i++) {
yield();
vTaskDelay(pdMS_TO_TICKS(1));
esp_task_wdt_reset();
}
}
// ##### Weight stabilization functions #####
/**
@@ -49,7 +62,7 @@ void resetWeightFilter() {
filteredWeight = 0.0f;
lastDisplayedWeight = 0;
lastStableWeight = 0; // Reset stable weight for API actions
// Initialize buffer with zeros
for (int i = 0; i < MOVING_AVERAGE_SIZE; i++) {
weightBuffer[i] = 0.0f;
@@ -62,11 +75,11 @@ void resetWeightFilter() {
float calculateMovingAverage() {
float sum = 0.0f;
int count = bufferFilled ? MOVING_AVERAGE_SIZE : bufferIndex;
for (int i = 0; i < count; i++) {
sum += weightBuffer[i];
}
return (count > 0) ? sum / count : 0.0f;
}
@@ -87,33 +100,33 @@ int16_t processWeightReading(float rawWeight) {
// Add to moving average buffer
weightBuffer[bufferIndex] = rawWeight;
bufferIndex = (bufferIndex + 1) % MOVING_AVERAGE_SIZE;
if (bufferIndex == 0) {
bufferFilled = true;
}
// Calculate moving average
float avgWeight = calculateMovingAverage();
// Apply low-pass filter
float smoothedWeight = applyLowPassFilter(avgWeight);
// Round to nearest gram
int16_t newWeight = round(smoothedWeight);
// Update displayed weight if display threshold is reached
if (abs(newWeight - lastDisplayedWeight) >= DISPLAY_THRESHOLD) {
lastDisplayedWeight = newWeight;
}
// Update global weight for API actions only if stable threshold is reached
int16_t weightToReturn = weight; // Default: keep current weight
if (abs(newWeight - lastStableWeight) >= API_THRESHOLD) {
lastStableWeight = newWeight;
weightToReturn = newWeight;
}
return weightToReturn;
}
@@ -144,7 +157,7 @@ uint8_t tareScale() {
Serial.println("Tare scale");
scale.tare();
resetWeightFilter();
return 1;
}
@@ -160,16 +173,16 @@ void scale_loop(void * parameter) {
for(;;) {
unsigned long currentTime = millis();
// Only measure at defined intervals to reduce noise
if (currentTime - lastMeasurementTime >= MEASUREMENT_INTERVAL_MS) {
if (scale.is_ready())
if (scale.is_ready())
{
// Waage manuell Taren
if (scaleTareRequest == true || (autoTare && scale_tare_counter >= 20))
if (scaleTareRequest == true || (autoTare && scale_tare_counter >= 20))
{
Serial.println("Re-Tare scale");
oledDisplayText("TARE Scale");
oledDisplayText(tr(STR_TARE_SCALE));
vTaskDelay(pdMS_TO_TICKS(1000));
scale.tare();
resetWeightFilter(); // Reset filter after manual tare
@@ -188,15 +201,16 @@ void scale_loop(void * parameter) {
// Get raw weight reading
float rawWeight = scale.get_units();
// Process weight with stabilization
int16_t stabilizedWeight = processWeightReading(rawWeight);
// Update global weight variable only if it changed significantly (for API actions)
if (stabilizedWeight != weight) {
weight = stabilizedWeight;
oledResetActivityTimer(); // Wake display on weight change
}
// Prüfen ob die Waage korrekt genullt ist
// Abweichung von 2g ignorieren
if (autoTare && (rawWeight > 2 && rawWeight < 7) || rawWeight < -2)
@@ -213,15 +227,111 @@ void scale_loop(void * parameter) {
if (currentTime - lastDebugTime > 2000) { // Print every 2 seconds
lastDebugTime = currentTime;
}
lastMeasurementTime = currentTime;
}
}
vTaskDelay(pdMS_TO_TICKS(10)); // Shorter delay for more responsive loop
}
}
long readHX711Raw() {
long value = 0;
for (int i = 0; i < 24; i++) {
digitalWrite(LOADCELL_SCK_PIN, HIGH);
delayMicroseconds(1);
value = (value << 1) | digitalRead(LOADCELL_DOUT_PIN);
digitalWrite(LOADCELL_SCK_PIN, LOW);
delayMicroseconds(1);
}
// Gain = 128 (1 extra pulse)
digitalWrite(LOADCELL_SCK_PIN, HIGH);
delayMicroseconds(1);
digitalWrite(LOADCELL_SCK_PIN, LOW);
return value;
}
bool deepSearchScale() {
// without pull-up resistor (10k) on LOADCELL_DOUT_PIN the hx711 lib functions
// are not reliable in detecting a missing chip
// these tests work even without pull-up resistor
const uint32_t timeout = 1000; // 1 second timeout for waiting for the chip to respond
const int samples = 10;
pinMode(LOADCELL_DOUT_PIN, INPUT);
pinMode(LOADCELL_SCK_PIN, OUTPUT);
digitalWrite(LOADCELL_SCK_PIN, LOW);
//delay(500);
friendlyWait(500);
// 1. HX711 vorhanden?
uint32_t start = millis();
while (digitalRead(LOADCELL_DOUT_PIN) == HIGH) {
if (millis() - start > timeout) {
Serial.println("HX711 not found (DOUT stays HIGH).");
return false;
}
}
Serial.println("HX711 seems to answer...");
// 2. Mehrere Werte lesen
long values[samples];
for (int i = 0; i < samples; i++) {
// warten bis bereit
uint32_t t = millis();
while (digitalRead(LOADCELL_DOUT_PIN) == HIGH) {
if (millis() - t > timeout) {
Serial.println("HX711 not found (Timeout during read).");
return false;
}
}
values[i] = readHX711Raw();
delay(50);
}
// 3. Analyse
int invalidCount = 0;
for (int i = 0; i < samples; i++) {
if (values[i] == 0 || values[i] == 0xFFFFFF) {
invalidCount++;
}
}
// 4. Entscheidungen
// Kein Sensor
if (invalidCount > samples / 2) {
Serial.println("HX711 not ready (Loadcell missing).");
return false;
}
Serial.println("HX711 found.");
return true;
}
bool scaleDetected(){
// Step 1: use hx711 library functions (need pull-up resistor to recognize missing hx711)
if ( !(scale.wait_ready_timeout(1000))) {
Serial.println("HX711 not found (pull-up resistor installed).");
return false;
}
//Step 2: when pull-up resistor is missing, then deep search...
return deepSearchScale();
}
void start_scale(bool touchSensorConnected) {
Serial.println("Prüfe Calibration Value");
float calibrationValue;
@@ -236,7 +346,7 @@ void start_scale(bool touchSensorConnected) {
calibrationValue = SCALE_DEFAULT_CALIBRATION_VALUE;
scaleCalibrated = false;
}
// auto Tare
// Wenn Touch Sensor verbunden, dann autoTare auf false setzen
// Danach prüfen was in NVS gespeichert ist
@@ -250,40 +360,43 @@ void start_scale(bool touchSensorConnected) {
scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);
oledShowProgressBar(6, 7, DISPLAY_BOOT_TEXT, "Serching scale");
for (uint16_t i = 0; i < 3000; i++) {
yield();
vTaskDelay(pdMS_TO_TICKS(1));
esp_task_wdt_reset();
oledShowProgressBar(5, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_SEARCHING_SCALE));
friendlyWait(3000);
scaleConnected = scaleDetected();
if ( scaleConnected ) {
scale.set_scale(calibrationValue);
//vTaskDelay(pdMS_TO_TICKS(5000));
// Initialize weight stabilization filter
resetWeightFilter();
// Display Gewicht
oledShowWeight(0);
Serial.println("starte Scale Task");
BaseType_t result = xTaskCreatePinnedToCore(
scale_loop, /* Function to implement the task */
"ScaleLoop", /* Name of the task */
2048, /* Stack size in words */
NULL, /* Task input parameter */
scaleTaskPrio, /* Priority of the task */
&ScaleTask, /* Task handle. */
scaleTaskCore); /* Core where the task should run */
if (result != pdPASS) {
Serial.println("Fehler beim Erstellen des ScaleLoop-Tasks");
} else {
Serial.println("ScaleLoop-Task erfolgreich erstellt");
}
}
while(!scale.is_ready()) {
vTaskDelay(pdMS_TO_TICKS(5000));
}
scale.set_scale(calibrationValue);
//vTaskDelay(pdMS_TO_TICKS(5000));
// Initialize weight stabilization filter
resetWeightFilter();
// Display Gewicht
oledShowWeight(0);
Serial.println("starte Scale Task");
BaseType_t result = xTaskCreatePinnedToCore(
scale_loop, /* Function to implement the task */
"ScaleLoop", /* Name of the task */
2048, /* Stack size in words */
NULL, /* Task input parameter */
scaleTaskPrio, /* Priority of the task */
&ScaleTask, /* Task handle. */
scaleTaskCore); /* Core where the task should run */
if (result != pdPASS) {
Serial.println("Fehler beim Erstellen des ScaleLoop-Tasks");
} else {
Serial.println("ScaleLoop-Task erfolgreich erstellt");
else {
// No HX711 - switching to NFC-only mode
Serial.println("Kann kein HX711 Board finden !"); // Sende Text "Kann kein..." an seriellen Monitor
oledDisplayText(tr(STR_HX711_NOT_FOUND));
vTaskDelay(pdMS_TO_TICKS(1500));
oledDisplayText(tr(STR_NOSCALE_MODE));
vTaskDelay(pdMS_TO_TICKS(1500));
}
}
@@ -298,12 +411,12 @@ uint8_t calibrate_scale() {
if (ScaleTask != NULL && xTaskGetCurrentTaskHandle() != ScaleTask) vTaskSuspend(ScaleTask);
pauseMainTask = 1;
if (scale.wait_ready_timeout(1000))
{
scale.set_scale();
oledShowProgressBar(0, 3, "Scale Cal.", "Empty Scale");
oledShowProgressBar(0, 3, tr(STR_SCALE_CAL), tr(STR_EMPTY_SCALE));
for (uint16_t i = 0; i < 5000; i++) {
yield();
@@ -315,14 +428,14 @@ uint8_t calibrate_scale() {
Serial.println("Tare done...");
Serial.print("Place a known weight on the scale...");
oledShowProgressBar(1, 3, "Scale Cal.", "Place the weight");
oledShowProgressBar(1, 3, tr(STR_SCALE_CAL), tr(STR_PLACE_WEIGHT));
for (uint16_t i = 0; i < 5000; i++) {
yield();
vTaskDelay(pdMS_TO_TICKS(1));
esp_task_wdt_reset();
}
float newCalibrationValue = scale.get_units(10);
Serial.print("Result: ");
Serial.println(newCalibrationValue);
@@ -348,7 +461,7 @@ uint8_t calibrate_scale() {
Serial.print("Verified stored value: ");
Serial.println(verifyValue);
oledShowProgressBar(2, 3, "Scale Cal.", "Remove weight");
oledShowProgressBar(2, 3, tr(STR_SCALE_CAL), tr(STR_REMOVE_WEIGHT));
scale.set_scale(newCalibrationValue);
resetWeightFilter(); // Reset filter after calibration
@@ -357,8 +470,8 @@ uint8_t calibrate_scale() {
vTaskDelay(pdMS_TO_TICKS(1));
esp_task_wdt_reset();
}
oledShowProgressBar(3, 3, "Scale Cal.", "Completed");
oledShowProgressBar(3, 3, tr(STR_SCALE_CAL), tr(STR_COMPLETED));
// For some reason it is not possible to re-tare the scale here, it will result in a wdt timeout. Instead let the scale loop do the taring
//scale.tare();
@@ -377,7 +490,7 @@ uint8_t calibrate_scale() {
{
Serial.println("Calibration value is invalid. Please recalibrate.");
oledShowProgressBar(3, 3, "Failure", "Calibration error");
oledShowProgressBar(3, 3, tr(STR_FAILURE), tr(STR_CALIBRATION_ERROR));
for (uint16_t i = 0; i < 50000; i++) {
yield();
@@ -385,13 +498,13 @@ uint8_t calibrate_scale() {
esp_task_wdt_reset();
}
returnState = 0;
}
}
}
else
else
{
Serial.println("HX711 not found.");
oledDisplayText("HX711 not found");
oledDisplayText(tr(STR_HX711_NOT_FOUND));
for (uint16_t i = 0; i < 30000; i++) {
yield();
+1
View File
@@ -23,6 +23,7 @@ extern uint8_t scale_tare_counter;
extern bool scaleTareRequest;
extern uint8_t pauseMainTask;
extern bool scaleCalibrated;
extern bool scaleConnected;
extern bool autoTare;
extern bool scaleCalibrationActive;
extern volatile bool scaleCalibrationRequest;
+147 -57
View File
@@ -11,12 +11,15 @@
#include "ota.h"
#include "config.h"
#include "debug.h"
#include "lang.h"
#include "wlan.h"
#ifndef VERSION
#define VERSION "1.2.0"
#endif
#define NO_CACHE "no-cache, no-store, must-revalidate"
#define CACHE_ASSETS "max-age=86400" // 24h Cache für statische Assets
AsyncWebServer server(webserverPort);
AsyncWebSocket ws("/ws");
@@ -24,6 +27,15 @@ AsyncWebSocket ws("/ws");
uint8_t lastSuccess = 0;
nfcReaderStateType lastnfcReaderState = NFC_IDLE;
// Template-Processor für dynamische Seiten (ESPAsyncWebServer built-in)
// Ersetzt %variable% Platzhalter in HTML-Dateien
String templateProcessor(const String& var) {
if (var == "registered") return filamanRegistered ? "Registered" : "Not Registered";
if (var == "filamanUrl") return filamanUrl;
if (var == "autoTare") return autoTare ? "checked" : "";
return String(); // Unbekannte Variable - leer zurückgeben
}
void sendNfcDataToClient(AsyncWebSocketClient *client) {
if(!client) return;
switch(nfcReaderState){
@@ -94,6 +106,12 @@ void sendWriteResult(AsyncWebSocketClient *client, uint8_t success) {
if (client) client->text(response); else ws.textAll(response);
}
// Ergebnis der asynchronen Geräte-Registrierung. Der HTTP-Request ist zu diesem
// Zeitpunkt längst beantwortet (202), das Frontend wartet auf diese WS-Nachricht.
void sendRegisterResult(bool success) {
ws.textAll("{\"type\":\"registerResult\",\"success\":" + String(success ? "true" : "false") + "}");
}
void foundNfcTag(AsyncWebSocketClient *client, uint8_t success) {
if (success == lastSuccess && client == nullptr) return;
ws.textAll("{\"type\":\"nfcTag\", \"payload\":{\"found\": " + String(success) + "}}");
@@ -113,74 +131,52 @@ void sendNfcData() {
}
void setupWebserver(AsyncWebServer &server) {
oledShowProgressBar(2, 7, DISPLAY_BOOT_TEXT, "Webserver init");
oledShowProgressBar(2, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_WEBSERVER_INIT));
ws.onEvent(onWsEvent);
server.addHandler(&ws);
// Static Routes
// ===== STATISCHE ASSETS mit serveStatic() =====
// Optimiert für concurrent Requests, mit 24h Browser-Cache
// serveStatic() ist nicht-blockierend und handhabt parallele Requests besser
server.serveStatic("/style.css", LittleFS, "/style.css")
.setCacheControl(CACHE_ASSETS);
server.serveStatic("/logo.png", LittleFS, "/logo.png")
.setCacheControl(CACHE_ASSETS);
server.serveStatic("/favicon.ico", LittleFS, "/favicon.ico")
.setCacheControl(CACHE_ASSETS);
// ===== STATISCHE HTML-SEITEN (ohne Template-Ersetzung) =====
server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /");
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/index.html", "text/html");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
});
server.on("/waage", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /waage");
String html = readFile("/waage.html");
html.replace("{{autoTare}}", autoTare ? "checked" : "");
auto response = request->beginResponse(200, "text/html", html);
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
});
server.on("/setup", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /setup");
String html = readFile("/setup.html");
html.replace("{{registered}}", filamanRegistered ? "Registered" : "Not Registered");
html.replace("{{filamanUrl}}", filamanUrl);
auto response = request->beginResponse(200, "text/html", html);
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
request->send(LittleFS, "/index.html", "text/html");
});
server.on("/wifi", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /wifi");
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/wifi.html", "text/html");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
request->send(LittleFS, "/wifi.html", "text/html");
});
server.on("/upgrade", HTTP_GET, [](AsyncWebServerRequest *request) {
Serial.println("Web: Request /upgrade");
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/upgrade.html", "text/html");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
request->send(LittleFS, "/upgrade.html", "text/html");
});
server.on("/version.txt", HTTP_GET, [](AsyncWebServerRequest *request){
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/version.txt", "text/plain");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
request->send(LittleFS, "/version.txt", "text/plain");
});
server.on("/style.css", HTTP_GET, [](AsyncWebServerRequest *request){
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/style.css", "text/css");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
// ===== DYNAMISCHE HTML-SEITEN (mit Template-Processor) =====
// Nutzt den eingebauten Template-Processor für %variable% Ersetzung
// Nicht-blockierend: Datei wird gestreamt und Variablen on-the-fly ersetzt
server.on("/waage", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /waage");
request->send(LittleFS, "/waage.html", "text/html", false, templateProcessor);
});
server.on("/logo.png", HTTP_GET, [](AsyncWebServerRequest *request){
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/logo.png", "image/png");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
});
server.on("/favicon.ico", HTTP_GET, [](AsyncWebServerRequest *request){
AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/favicon.ico", "image/x-icon");
response->addHeader("Cache-Control", NO_CACHE);
request->send(response);
server.on("/setup", HTTP_GET, [](AsyncWebServerRequest *request){
Serial.println("Web: Request /setup");
request->send(LittleFS, "/setup.html", "text/html", false, templateProcessor);
});
// API Routes
@@ -200,12 +196,16 @@ void setupWebserver(AsyncWebServer &server) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid JSON\"}");
return;
}
if (doc["url"].is<String>()) filamanUrl = doc["url"].as<String>();
saveFilamanConfig();
if (registerDevice(doc["code"].as<String>())) {
request->send(200, "application/json", "{\"success\": true}");
// WICHTIG: registerDevice() macht einen blockierenden HTTPClient-Call
// (5s Timeout). Direkt hier aufgerufen friert das den AsyncTCP-Task ein
// und reisst alle laufenden HTTP-/WebSocket-Verbindungen ab. Daher nur
// einreihen und sofort antworten; das Ergebnis kommt per WebSocket
// ("registerResult") vom filamanApiTask.
String url = doc["url"].is<String>() ? doc["url"].as<String>() : String("");
if (registerDeviceAsync(url, doc["code"].as<String>())) {
request->send(202, "application/json", "{\"success\": true, \"pending\": true}");
} else {
request->send(400, "application/json", "{\"success\": false}");
request->send(503, "application/json", "{\"success\": false, \"error\": \"API queue full\"}");
}
});
@@ -225,13 +225,16 @@ void setupWebserver(AsyncWebServer &server) {
String payloadString;
serializeJson(doc, payloadString);
bool hasSpoolId = !doc["spool_id"].isNull() || !doc["sm_id"].isNull();
int spoolId = doc["spool_id"] | 0;
if (spoolId == 0 && doc["sm_id"].is<String>()) {
spoolId = doc["sm_id"].as<String>().toInt();
}
int locationId = doc["location_id"] | 0;
// Start write task (fire and forget)
startWriteJsonToTag(!doc["spool_id"].isNull(), payloadString.c_str(), spoolId, locationId);
startWriteJsonToTag(hasSpoolId, payloadString.c_str(), spoolId, locationId);
// Respond immediately
request->send(200, "application/json", "{\"success\": true, \"message\": \"Schreibvorgang wurde gestartet. Bitte Tag bereit halten...\"}");
});
@@ -240,6 +243,93 @@ void setupWebserver(AsyncWebServer &server) {
request->send(200, "application/json", "{\"version\": \"" VERSION "\"}");
});
// Language API
server.on("/api/language", HTTP_GET, [](AsyncWebServerRequest *request){
JsonDocument doc;
doc["lang"] = getLangCode();
String response;
serializeJson(doc, response);
request->send(200, "application/json", response);
});
server.on("/api/language", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
JsonDocument doc;
DeserializationError error = deserializeJson(doc, (const uint8_t*)data, len);
if (error) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid JSON\"}");
return;
}
String lang = doc["lang"] | "";
if (lang == "de") {
saveLanguage(LANG_DE);
} else if (lang == "en") {
saveLanguage(LANG_EN);
} else {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid language\"}");
return;
}
request->send(200, "application/json", "{\"success\": true}");
});
// Display Settings API
server.on("/api/display", HTTP_GET, [](AsyncWebServerRequest *request){
JsonDocument doc;
doc["sleepTimeout"] = oledSleepTimeout;
String response;
serializeJson(doc, response);
request->send(200, "application/json", response);
});
server.on("/api/display", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
JsonDocument doc;
DeserializationError error = deserializeJson(doc, (const uint8_t*)data, len);
if (error) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid JSON\"}");
return;
}
if (!doc["sleepTimeout"].is<int>()) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Missing sleepTimeout\"}");
return;
}
uint16_t timeout = (uint16_t)constrain((int)doc["sleepTimeout"], 0, 3600);
saveOledSleepTimeout(timeout);
request->send(200, "application/json", "{\"success\": true}");
});
// WiFi TX Power API (Wert in 0.1 dBm, z.B. 195 = 19.5dBm)
server.on("/api/wifi-power", HTTP_GET, [](AsyncWebServerRequest *request){
JsonDocument doc;
doc["txPower"] = wifiTxPowerDeciDbm;
String response;
serializeJson(doc, response);
request->send(200, "application/json", response);
});
server.on("/api/wifi-power", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
JsonDocument doc;
DeserializationError error = deserializeJson(doc, (const uint8_t*)data, len);
if (error) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid JSON\"}");
return;
}
if (!doc["txPower"].is<int>()) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Missing txPower\"}");
return;
}
int16_t txPower = (int16_t)doc["txPower"].as<int>();
if (!isValidTxPowerDeciDbm(txPower)) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid txPower\"}");
return;
}
saveWifiTxPower(txPower);
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/api/v1/rfid/scan-request", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
setScanRequest(true);
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/reboot", HTTP_GET, [](AsyncWebServerRequest *request){
request->send(200, "text/plain", "Rebooting...");
delay(500);
+1
View File
@@ -26,5 +26,6 @@ void sendAmsData(AsyncWebSocketClient *client);
void sendNfcData();
void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);
void sendWriteResult(AsyncWebSocketClient *client, uint8_t success);
void sendRegisterResult(bool success);
#endif
+138 -41
View File
@@ -6,38 +6,141 @@
#include <DNSServer.h>
#include "display.h"
#include "config.h"
#include "lang.h"
#include <Preferences.h>
WiFiManager wm;
bool wm_nonblocking = false;
uint8_t wifiErrorCounter = 0;
// Erlaubte Stufen in 0.1 dBm. Der ESP32-Treiber kennt nur diese festen Werte;
// alles andere fällt auf das Maximum (19.5dBm) zurück.
wifi_power_t txPowerFromDeciDbm(int16_t deciDbm) {
switch (deciDbm) {
case 85: return WIFI_POWER_8_5dBm;
case 110: return WIFI_POWER_11dBm;
case 130: return WIFI_POWER_13dBm;
case 150: return WIFI_POWER_15dBm;
case 170: return WIFI_POWER_17dBm;
case 195: return WIFI_POWER_19_5dBm;
default: return WIFI_POWER_19_5dBm;
}
}
bool isValidTxPowerDeciDbm(int16_t deciDbm) {
return deciDbm == 85 || deciDbm == 110 || deciDbm == 130 ||
deciDbm == 150 || deciDbm == 170 || deciDbm == 195;
}
void loadWifiTxPower() {
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, true);
int16_t stored = preferences.getShort(NVS_KEY_WIFI_TXPOWER, 195);
preferences.end();
wifiTxPowerDeciDbm = isValidTxPowerDeciDbm(stored) ? stored : 195;
Serial.print("WiFi TX power loaded: ");
Serial.print(wifiTxPowerDeciDbm / 10.0, 1);
Serial.println(" dBm");
}
void saveWifiTxPower(int16_t deciDbm) {
if (!isValidTxPowerDeciDbm(deciDbm)) return;
wifiTxPowerDeciDbm = deciDbm;
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, false);
preferences.putShort(NVS_KEY_WIFI_TXPOWER, deciDbm);
preferences.end();
// Sofort anwenden, ein Neustart ist nicht noetig.
WiFi.setTxPower(txPowerFromDeciDbm(deciDbm));
}
void wifiSettings() {
// Standard WiFi-Einstellungen für höchste Stabilität mit ESPAsyncWebServer
WiFi.mode(WIFI_STA);
WiFi.mode(WIFI_STA);
WiFi.setHostname("FilaMan");
// Wir lassen das Power Management (Sleep) auf dem ESP-Standard.
// Ein erzwungenes Ausschalten führt zu RF-Abstürzen bei vielen asynchronen HTTP-Requests.
// Angemessene Sendeleistung (reduziert Hitzeprobleme)
WiFi.setTxPower(WIFI_POWER_17dBm); // Set stable transmit power (default is 19.5 which gets hot)
// Wir überlassen die Protokoll-Aushandlung (b/g/n) dem Treiber. Harte Vorgaben crashen unter Last.
// Aktiviere WiFi-Roaming für bessere Stabilität
esp_wifi_set_rssi_threshold(-80);
// ESP32-Core Auto-Reconnect aktivieren (unabhängig vom WiFiManager-Flag).
// Sorgt dafür, dass der WiFi-Stack autonom direkt nach einem Disconnect
// neu verbindet, ohne auf das 15s-Polling in checkWiFiConnection() warten zu müssen.
WiFi.setAutoReconnect(true);
WiFi.persistent(true);
// KRITISCH: Power-Save deaktivieren für stabilen Webserver-Betrieb
// Ohne dies geht WiFi in Modem-Sleep und verpasst Requests/Responses
// Dies ist die Hauptursache für Verbindungsabbrüche bei regelmäßigen API-Calls
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
// Sendeleistung, einstellbar unter Setup (Default 19.5dBm = Maximum).
// 17dBm war früher ein Kompromiss gegen Hitzeprobleme, führte bei marginalem
// Empfang aber zu AP-seitigen Auth-/Assoc-Kicks (reason=2/4/9/202). Umgekehrt
// kann volle Leistung direkt neben dem AP dessen Empfaenger uebersteuern -
// dann hilft ein niedrigerer Wert (beim ESP32-S3 z.B. 8.5dBm).
loadWifiTxPower();
WiFi.setTxPower(txPowerFromDeciDbm(wifiTxPowerDeciDbm));
// Hinweis: Kein esp_wifi_set_rssi_threshold() mehr.
// Der vorherige Wert (-80 dBm) löste in Single-AP-Heimnetzen häufige
// Disconnects aus, sobald das Signal in den normalen Wohnungs-Empfangsbereich
// fiel. Ohne Mesh-/Roaming-Setup bringt der Threshold keinen Vorteil.
}
// Reagiert sofort auf Verbindungsverlust, statt bis zum nächsten
// checkWiFiConnection()-Tick zu warten. Das ESP32-Auto-Reconnect übernimmt
// die eigentliche Wiederherstellung; hier nur Logging + Display-Update.
void onWiFiEvent(WiFiEvent_t event, WiFiEventInfo_t info) {
switch (event) {
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED: {
// BSSID/RSSI mitloggen: wechselt die BSSID zwischen den Reconnects,
// pendelt das Gerät zwischen zwei APs (Mesh/Repeater) - dann kommen
// die Abbrüche vom Roaming, nicht vom Webserver.
const uint8_t *bssid = info.wifi_sta_disconnected.bssid;
Serial.printf("WiFi event: STA_DISCONNECTED, reason=%u, "
"bssid=%02X:%02X:%02X:%02X:%02X:%02X, rssi=%d\n",
info.wifi_sta_disconnected.reason,
bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5],
WiFi.RSSI());
if (wifiOn) {
wifiOn = false;
oledShowTopRow();
}
break;
}
case ARDUINO_EVENT_WIFI_STA_GOT_IP:
Serial.printf("WiFi event: STA_GOT_IP %s, bssid=%s, rssi=%d, ch=%d\n",
WiFi.localIP().toString().c_str(),
WiFi.BSSIDstr().c_str(),
WiFi.RSSI(),
WiFi.channel());
wifiOn = true;
wifiErrorCounter = 0;
// Power-Save nach Reconnect erneut deaktivieren (wird vom Stack
// gelegentlich zurückgesetzt).
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
// Gleiches gilt für die Sendeleistung: nach einem Reconnect erneut setzen.
WiFi.setTxPower(txPowerFromDeciDbm(wifiTxPowerDeciDbm));
oledShowTopRow();
break;
default:
break;
}
}
void configModeCallback (WiFiManager *myWiFiManager) {
Serial.println("Entered config mode");
oledShowTopRow();
oledDisplayText("WiFi Config Mode");
oledDisplayText(tr(STR_WIFI_CONFIG_MODE));
}
void initWiFi() {
// load Wifi settings
wifiSettings();
// WiFi-Events abonnieren, bevor autoConnect() läuft, damit auch frühe
// Disconnects/Reconnects schon erfasst werden.
WiFi.onEvent(onWiFiEvent);
wm.setAPCallback(configModeCallback);
wm.setSaveConfigCallback([]() {
@@ -47,22 +150,25 @@ void initWiFi() {
if(wm_nonblocking) wm.setConfigPortalBlocking(false);
//wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
wm.setWiFiAutoReconnect(true);
// WiFiManager-Reconnect deaktiviert: der ESP32-Stack übernimmt das via
// setAutoReconnect(true). Zwei parallele Reconnect-Mechanismen erzeugen
// sonst einen Verbindungssturm, der den Router zu AUTH_EXPIRE-Kicks verleitet.
wm.setWiFiAutoReconnect(false);
wm.setConnectTimeout(10);
oledShowProgressBar(1, 7, DISPLAY_BOOT_TEXT, "WiFi init");
oledShowProgressBar(1, NUM_SETUP_STEPS, DISPLAY_BOOT_TEXT, tr(STR_WIFI_INIT));
//bool res = wm.autoConnect("FilaMan"); // anonymous ap
if(!wm.autoConnect("FilaMan")) {
Serial.println("Failed to connect or hit timeout");
// ESP.restart();
oledShowTopRow();
oledDisplayText("WiFi not connected Check Portal");
}
oledDisplayText(tr(STR_WIFI_NOT_CONNECTED));
}
else {
wifiOn = true;
//if you get here you have connected to the WiFi
//if you get here you have connected to the WiFi
Serial.println("connected...yeey :)");
Serial.print("IP address: ");
Serial.println(WiFi.localIP());
@@ -72,35 +178,26 @@ void initWiFi() {
}
void checkWiFiConnection() {
if (WiFi.status() != WL_CONNECTED)
if (WiFi.status() != WL_CONNECTED)
{
if (wifiOn) {
Serial.println("WiFi connection lost. LwIP is auto-reconnecting...");
wifiOn = false;
oledShowTopRow();
oledDisplayText("WiFi reconnecting");
}
// setAutoReconnect(true) übernimmt die Wiederverbindung automatisch.
// Hier nur Display-Update und Fehler zählen für den Neustart-Watchdog.
oledDisplayText(tr(STR_WIFI_RECONNECTING));
wifiErrorCounter++;
// Only restart after a significant time of no connection (e.g. 5 minutes)
// Assuming WIFI_CHECK_INTERVAL is 60000ms (1 minute), 5 errors = 5 minutes
if (wifiErrorCounter >= 5)
// Nach ca. 5 Minuten ohne Verbindung Neustart (bei WIFI_CHECK_INTERVAL
// = 15s entspricht das 20 Fehlern).
const uint8_t maxErrors = (uint8_t)(300000UL / WIFI_CHECK_INTERVAL);
if (wifiErrorCounter >= maxErrors)
{
Serial.println("WiFi unable to reconnect for 5 minutes. Restarting...");
Serial.println("WiFi unable to reconnect for ~5 minutes. Restarting...");
ESP.restart();
}
}
else
{
if (!wifiOn) {
Serial.println("WiFi reconnected.");
wifiErrorCounter = 0;
wifiOn = true;
oledShowTopRow();
} else {
// Reset error counter if we are connected (just to be safe)
wifiErrorCounter = 0;
}
// Connected: Fehlerzähler zurücksetzen. wifiOn wird vom GOT_IP-Event
// gepflegt, daher hier nichts weiter zu tun.
wifiErrorCounter = 0;
}
}
}
+5
View File
@@ -6,4 +6,9 @@
void initWiFi();
void checkWiFiConnection();
// Sendeleistung in 0.1 dBm (85/110/130/150/170/195). Ungueltige Werte werden ignoriert.
bool isValidTxPowerDeciDbm(int16_t deciDbm);
void loadWifiTxPower();
void saveWifiTxPower(int16_t deciDbm);
#endif