1419 Commits
Author SHA1 Message Date
ManuelW77 8f4c67eb46 docs: update platformio.ini for version v3.4.10 v3.4.10 2026-10-03 11:55:06 +02:00
ManuelW cb3d3952b0 Merge pull request #30 from anderl1969/fix/main-loop-indentation
style: fix indentation in main loop
2026-10-03 11:54:16 +02:00
anderl1969 3662422c1c style: fix indentation in main loop 2026-09-30 16:23:45 +02:00
ManuelW77 a04cc37190 docs: update platformio.ini for version v3.4.9 v3.4.9 2026-09-20 13:44:05 +02:00
ManuelW 7e6854cd8a Merge pull request #28 from Fire-Devils/feature/wifi-txpower-setting
Make WiFi TX power configurable, document ESP32-S3 pins
2026-09-20 12:46:54 +02:00
ManuelW77andClaude Opus 5 a5ba8a901a Make WiFi TX power configurable, document ESP32-S3 pins
The transmit power was hardcoded to 19.5 dBm. Some setups need a lower
value (device right next to the AP, weak 3.3V rail), so it is now a user
setting instead of a per-chip constant.

- wlan.cpp: load/save/apply TX power (0.1 dBm steps, NVS key wifi_txpwr,
  default 195), re-applied on GOT_IP so it survives a reconnect
- website.cpp: /api/wifi-power GET/POST with validation
- setup.html: "WiFi Settings" card
- README.md/README.de.md: pin table gets an ESP32-S3 column plus a warning
  that GPIO19/20 are the native USB data lines
- config.cpp: same warning next to the HX711 pin definitions

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-20 12:42:13 +02:00
ManuelW b8cfa1ce98 Merge pull request #27 from KollegeChris/main
Optimizations for ESP32S3
2026-09-20 12:40:37 +02:00
Christoph Stoiber 884c8bcf8f Comment adjusted for ESP32-S3 2026-09-18 13:09:31 +02:00
Christoph Stoiber 502c1d6ab8 Restore wlan power 2026-09-18 13:05:00 +02:00
Christoph Stoiber 3e995faa8c Changed HX711 Pins 2026-09-18 12:06:50 +02:00
Christoph Stoiber 4b93362dd7 Improved for ESP32S3 2026-09-17 18:07:53 +02:00
ManuelW 9a1d394bc8 Merge pull request #26 from anderl1969/doc/printfileslite
Doc/printfileslite
2026-08-27 13:47:02 +02:00
anderl1969 fab9fdae87 Add readme for FilaMan Lite with version details
Added details about low and high version casing dimensions and NFC connection issues.
2026-08-25 09:10:10 +02:00
anderl1969 1939c1b57f Add print files section to english NFC-only mode documentation
Added section for print files with STL links.
2026-08-25 09:01:58 +02:00
anderl1969 026cbd5179 Fix link to STL files in NFC-only mode documentation 2026-08-25 09:00:40 +02:00
anderl1969 15c66af948 Add Druck-Dateien section to NFC-only mode documentation
Added section for print files and STL resources.
2026-08-25 08:53:55 +02:00
anderl1969 8b746b204a added STLs for FilaMan Lite case (without scale) 2026-08-25 08:49:04 +02:00
ManuelW77 5241969c57 docs: update platformio.ini for version v3.4.8 v3.4.8 2026-08-21 16:45:42 +02:00
ManuelW77 80825c6cfc fix(net): unblock AsyncTCP during device registration, max TX power, roaming diagnostics
Three independent improvements to the WiFi/webserver stability:

1. /api/register called registerDevice() directly inside the AsyncWebServer
   body handler. That function does a blocking HTTPClient POST with a 5s
   timeout, freezing the AsyncTCP task and tearing down every in-flight HTTP
   and WebSocket connection. It now goes through the existing apiQueue /
   filamanApiTask machinery: the endpoint answers 202 immediately (or 503 if
   the queue is full, which would otherwise leave the UI waiting forever) and
   the outcome is pushed to the browser as a "registerResult" WebSocket
   message. setup.html waits for that message instead of the HTTP response.

2. TX power raised from 17dBm to the 19.5dBm maximum. The reduced setting was
   a compromise against heat, but at marginal signal levels it invites
   AP-side auth/assoc kicks (reason=2/4/9/202).

3. Disconnect/GOT_IP logging now includes BSSID, RSSI and channel, so a device
   bouncing between two APs (mesh/repeater with separate DHCP scopes) can be
   told apart from webserver-induced drops.

Both build environments verified.
2026-08-21 16:43:00 +02:00
ManuelW77andRaul Santamaria 337d7f8983 fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 16:32:07 +02:00
ManuelW77 6749022243 docs: update platformio.ini for version v3.4.7 v3.4.7 2026-08-21 16:13:49 +02:00
ManuelW77 1da123a01f Revert "fix(nfc): pulse PN532 RSTPDN before begin()"
This reverts commit 27e16c3d1b.
2026-08-21 16:11:13 +02:00
ManuelW77 028fe85586 docs: update platformio.ini for version v3.4.6 v3.4.6 2026-08-21 15:50:02 +02:00
ManuelW77andRaul Santamaria 27e16c3d1b fix(nfc): pulse PN532 RSTPDN before begin()
Adafruit_PN532::begin() drives the reset line too briefly for some
modules to reliably leave powerdown (~1ms LOW/2ms HIGH internally),
which then makes getFirmwareVersion() return 0 right after begin() and
startNfc() report "Kann kein RFID Board finden". Add an explicit
50ms/200ms reset pulse before begin(), shared via pulsePn532Reset()
so startNfc() and the interface recovery path in ntag2xx_WriteNDEF()
don't duplicate the timing.

Adopts the fix from PR #24 (credit: rsantamaria01), refactored into a
shared helper per review feedback (duplicate pulse code flagged by the
automated Copilot review on that PR).

Co-Authored-By: Raul Santamaria <raulsantamariao@hotmail.com>
2026-08-21 15:48:52 +02:00
ManuelW77 6f9c99edb6 fix(config): restore ESP32 Dev Board pin numbers, gate S3 pins behind CONFIG_IDF_TARGET_ESP32S3
PR #14 (0f43f22) unconditionally replaced the classic ESP32 Dev Board
pin numbers for PN532 (NFC), HX711 (scale) and TTP223 (touch) with the
ESP32-S3 values in the single shared src/config.cpp, even though the
esp32dev build environment (used for all standard-hardware releases)
still links against it unchanged. This caused nfc.begin() to talk to
the wrong physical pins on ESP32 Dev Board hardware, producing a
watchdog reset during NFC init and a subsequent bootloop.

Verified via objdump on both compiled config.cpp.o that esp32dev now
resolves to 32/33/16/17/25 and esp32-s3-devkitc-1 to 15/16/19/20/7.
2026-08-21 15:46:04 +02:00
ManuelW77 a7b97dc0c9 docs: update platformio.ini for version v3.4.5 v3.4.5 2026-08-21 15:12:12 +02:00
ManuelW77 2bae0369fa docs: update platformio.ini for version v3.4.4 2026-08-20 12:43:04 +02:00
ManuelW77 1c3aae5f49 update: increment version to 3.4.3 in platformio.ini 2026-08-20 12:42:57 +02:00
ManuelW77 4054a96067 merge: sync devel with main
devel was 16 commits behind main and had diverged with the
esp32-s3-devkitc-1 board support (PR #14) that never made it back to
main. Merges main into devel so both stay on the same feature/fix
baseline; resolves the platformio.ini conflict by keeping devel's
shared [env] section (used by both esp32dev and esp32-s3-devkitc-1)
and carrying forward main's AsyncTCP watchdog fix
(-DCONFIG_ASYNC_TCP_USE_WDT=0).
2026-08-20 09:32:41 +02:00
ManuelW77 f6b6df55c8 docs: update platformio.ini for version v3.4.2 v3.4.2 2026-08-12 10:18:20 +02:00
ManuelW77 f3426119e8 fix: update JSON handling to support spool_id and sm_id interchangeably 2026-08-12 10:14:35 +02:00
Manuel Weiser dd508e2e1e fix: update release flow 2026-08-09 16:04:09 +02:00
Manuel Weiser 0ab3db5f2d update version v3.4.1 2026-08-09 15:37:24 +02:00
Manuel Weiser f86d71f8b2 docs: update platformio.ini for beta version v3.4.0-beta1 2026-05-28 19:43:01 +02:00
Manuel Weiser b2ac1e9fcd Merge branch 'devel' 2026-05-28 19:42:53 +02:00
Manuel Weiser f2c1d44f5a chore: update version to 3.4.0 in platformio.ini 2026-05-28 19:42:15 +02:00
Manuel Weiser 3c9a0f17ba docs: update platformio.ini for beta version v3.3.2-beta1 2026-05-28 19:37:26 +02:00
Manuel Weiser 6a9acb9d27 feat: implement scan request handling with timeout and error reporting 2026-05-28 18:58:10 +02:00
Manuel Weiser 9b93d219f9 fix: skip fast-path detection for known spools when a scan request is active 2026-05-28 18:26:08 +02:00
Manuel Weiser f3f51cd6f8 fix: disable WiFiManager auto-reconnect to prevent connection storms 2026-05-28 17:48:42 +02:00
Manuel Weiser 9d3a3411fb feat: enhance RFID tag detection with NDEF support and improved error handling 2026-05-28 17:31:35 +02:00
Manuel Weiser 775700f90f feat: add tag data handling and scan request functionality 2026-05-28 17:04:24 +02:00
Manuel Weiser 9456e6ab91 feat: add support for extended-data tags with OpenSpool/FilaMan protocol 2026-05-28 16:28:13 +02:00
Manuel Weiser 30409a59e0 docs: update platformio.ini for version v3.3.2 v3.3.2 2026-05-25 08:29:56 +02:00
Manuel Weiser 17f86a0094 feat: add package-lock.json and update WiFi settings for improved stability 2026-05-25 08:29:26 +02:00
ManuelW 0d38728072 Merge pull request #14 from KollegeChris/esp32-s3
Added configuration for esp32-s3
2026-05-19 11:09:07 +02:00
Christoph Stoiber 0f43f228e7 Added configuration for esp32-s3 2026-05-05 21:20:57 +02:00
ManuelW eb1c032444 Merge pull request #12 from anderl1969/feature/hw-detection
Documentation for NFC-only mode
2026-04-06 16:21:04 +02:00
anderl1969 696b8ba518 docs: German and English documentation for the NFC-only mode 2026-03-30 15:05:23 +02:00
anderl1969 728c40f0fa docs: images for NFC-only mode 2026-03-30 00:13:12 +02:00