1 parent
8efb7e5b51
commit
e6220a828f
1 file changed
+45
@@ -1739,6 +1739,50 @@ static int CmdBwmCharge(const char *Cmd) {
|
||||
return PM3_SUCCESS;
|
||||
}
|
||||
|
||||
static int CmdBwmVchg(const char *Cmd) {
|
||||
CLIParserContext *ctx;
|
||||
CLIParserInit(&ctx, "hw bwmvchg",
|
||||
"Set the BWM charger (AW32001E) charge-voltage regulation target.\n"
|
||||
"Lowering it below 4.2 V reduces top-of-charge stress and extends cell\n"
|
||||
"life. Snaps to the nearest 15 mV step; clamped to 3600..4200 mV. This is\n"
|
||||
"a runtime register write (reverts on the charger watchdog / POR); the\n"
|
||||
"firmware re-applies the " _YELLOW_("4100 mV") " default at every boot. PM5 only.",
|
||||
"hw bwmvchg --> set charge voltage to default 4100 mV (->4.095 V)\n"
|
||||
"hw bwmvchg --mv 4200 --> set charge voltage to 4200 mV");
|
||||
|
||||
void *argtable[] = {
|
||||
arg_param_begin,
|
||||
arg_int0(NULL, "mv", "<mV>", "charge voltage in mV (default 4100, clamped 3600..4200)"),
|
||||
arg_param_end
|
||||
};
|
||||
CLIExecWithReturn(ctx, Cmd, argtable, true);
|
||||
int mv = arg_get_int_def(ctx, 1, 4100);
|
||||
CLIParserFree(ctx);
|
||||
|
||||
if (mv < 3600 || mv > 4200) {
|
||||
PrintAndLogEx(WARNING, "charge voltage out of range (3600..4200 mV): %d", mv);
|
||||
return PM3_EINVARG;
|
||||
}
|
||||
|
||||
uint8_t payload[2] = { (uint8_t)(mv & 0xFF), (uint8_t)((mv >> 8) & 0xFF) };
|
||||
PrintAndLogEx(INFO, "Setting BWM charge voltage to " _YELLOW_("%d mV") "...", mv);
|
||||
|
||||
clearCommandBuffer();
|
||||
SendCommandNG(CMD_PM5_BWM_SET_VCHG, payload, sizeof(payload));
|
||||
PacketResponseNG resp;
|
||||
if (WaitForResponseTimeout(CMD_PM5_BWM_SET_VCHG, &resp, 5000) == false) {
|
||||
PrintAndLogEx(WARNING, "command timeout (is this a PM5 with a BWM fitted?)");
|
||||
return PM3_ETIMEOUT;
|
||||
}
|
||||
if (resp.status != PM3_SUCCESS) {
|
||||
PrintAndLogEx(FAILED, "failed to set charge voltage - check BWM present");
|
||||
return resp.status;
|
||||
}
|
||||
uint16_t applied = (resp.length >= 2) ? (resp.data.asBytes[0] | (resp.data.asBytes[1] << 8)) : 0;
|
||||
PrintAndLogEx(SUCCESS, "Charge voltage set to " _YELLOW_("%u.%03u V") " (nearest 15 mV step).", applied / 1000, applied % 1000);
|
||||
return PM3_SUCCESS;
|
||||
}
|
||||
|
||||
static int CmdBwmSetCap(const char *Cmd) {
|
||||
CLIParserContext *ctx;
|
||||
CLIParserInit(&ctx, "hw bwmsetcap",
|
||||
@@ -2259,6 +2303,7 @@ static command_t CommandTable[] = {
|
||||
{"standalone", CmdStandalone, IfPm3Present, "Start installed standalone mode on device"},
|
||||
{"tia", CmdTia, IfPm3Present, "Trigger a Timing Interval Acquisition to re-adjust the RealTimeCounter divider"},
|
||||
{"bwmsetcap", CmdBwmSetCap, IfPm5, "Set BWM fuel-gauge design capacity (PM5, run once after battery change)"},
|
||||
{"bwmvchg", CmdBwmVchg, IfPm5, "Set BWM charger charge-voltage target (PM5, default 4100 mV)"},
|
||||
{"bwmcharge", CmdBwmCharge, IfPm5, "Enable/disable BWM battery charging (PM5, one-shot)"},
|
||||
{"bwmautooff", CmdBwmAutoOff, IfPm5, "Toggle auto power-off on USB unplug (PM5, BWM)"},
|
||||
{"bwmwifi", CmdBWMWifi, IfPm5, "Bring up BWM WiFi (STA + TCP server) for a tcp: connection (PM5)"},
|
||||
|
||||
Reference in new issue
Block a user