Add files via upload

Signed-off-by: Niel Nielsen <nieldk@gmail.com>
This commit is contained in:
Niel Nielsen authored and Philippe Teuwen committed 2026-08-30 15:24:08 +02:00
1 parent 519e0f6de9
commit 8efb7e5b51
3 files changed
+61

No files matched your search

+11
View File
@@ -3845,6 +3845,17 @@ static void PacketReceived(PacketCommandNG *packet) {
break;
}
#ifdef WITH_BWM_STATUS
case CMD_PM5_BWM_SET_VCHG: {
// Set the AW32001E charge-voltage target (REG04 VBAT_REG).
// Payload: optional uint16 mV (LE); absent -> default.
uint16_t mv = (packet->length >= 2)
? (uint16_t)(packet->data.asBytes[0] | (packet->data.asBytes[1] << 8))
: BWM_DEFAULT_VCHG_MV;
I2C_init(true);
uint16_t applied = bwm_charger_set_vchg(mv);
reply_ng(CMD_PM5_BWM_SET_VCHG, applied ? PM3_SUCCESS : PM3_EFAILED, (uint8_t *)&applied, sizeof(applied));
break;
}
case CMD_PM5_BWM_SET_CAP: {
// One-time BWM fuel-gauge (BQ27427) Design Capacity provisioning.
// Payload: optional uint16 mAh (LE); absent -> reference default.
+44
View File
@@ -44,6 +44,14 @@
#define BWM_CHG_REG_SYSSTAT 0x08 // system status (CHG_STAT / PG_STAT / THERM_STAT)
#define BWM_CHG_REG_FAULT 0x09 // fault register (latched, read-on-clear)
#define BWM_CHG_FET_DIS (1u << 5)
#define BWM_CHG_REG_VCHG 0x04 // Charge Voltage: VBAT_REG[7:2], VBAT_PRE[1], VRECH[0]
// AW32001E datasheet V1.2 REG04: VBAT_REG = 3600mV + 15mV*code, [7:2] (POR 0x28=4.200V)
#define BWM_CHG_VCHG_BASE_MV 3600
#define BWM_CHG_VCHG_STEP_MV 15
#define BWM_CHG_VCHG_MASK 0xFC // REG04[7:2]
#define BWM_CHG_VCHG_SHIFT 2
#define BWM_CHG_VCHG_MIN_MV 3600
#define BWM_CHG_VCHG_MAX_MV 4200 // firmware safety ceiling (chip allows 4545)
// --- BQ27427 fuel gauge (I2C 8-bit address 0xAA = 7-bit 0x55 << 1) -------------
#define BWM_GAUGE_ADDR 0xAA
@@ -177,6 +185,12 @@ void bwm_print_battery_status(void) {
uint16_t ichg_ma = 8 * ((reg02 & 0x3F) + 1);
Dbprintf(" Charge current...... %u mA", ichg_ma);
}
uint8_t reg04 = 0;
if (I2C_BufferReadRaw(&reg04, 1, BWM_CHG_REG_VCHG, BWM_CHG_ADDR) > 0) {
// VBAT_REG (REG04[7:2]): 3600mV + 15mV*code [101000=4.200V default]
uint16_t vchg_mv = BWM_CHG_VCHG_BASE_MV + ((reg04 >> BWM_CHG_VCHG_SHIFT) & 0x3F) * BWM_CHG_VCHG_STEP_MV;
Dbprintf(" Charge voltage...... %u.%03u V", vchg_mv / 1000, vchg_mv % 1000);
}
}
// --- fuel gauge (BQ27427) ---
@@ -284,6 +298,33 @@ bool bwm_charger_set_charge(bool enable) {
return I2C_BufferWrite(&reg01, 1, 0x01, BWM_CHG_ADDR);
}
// Set the charge-voltage regulation target (AW32001E REG04 VBAT_REG, bits [7:2]).
// Clamps to 3600..4200 mV (the chip allows up to 4545, but we cap the ceiling in
// firmware so a stray value can't over-stress the cell), rounds to the nearest
// 15 mV step, and preserves REG04[1:0] (VBAT_PRE / VRECH). Read-modify-write.
// Returns the mV actually applied, or 0 on I2C failure.
uint16_t bwm_charger_set_vchg(uint16_t mv) {
if (mv < BWM_CHG_VCHG_MIN_MV) {
mv = BWM_CHG_VCHG_MIN_MV;
}
if (mv > BWM_CHG_VCHG_MAX_MV) {
mv = BWM_CHG_VCHG_MAX_MV;
}
uint16_t code = (uint16_t)(((mv - BWM_CHG_VCHG_BASE_MV) + (BWM_CHG_VCHG_STEP_MV / 2)) / BWM_CHG_VCHG_STEP_MV);
if (code > 0x3F) {
code = 0x3F; // 6-bit field
}
uint8_t reg04 = 0;
if (I2C_BufferReadRaw(&reg04, 1, BWM_CHG_REG_VCHG, BWM_CHG_ADDR) <= 0) {
return 0;
}
reg04 = (uint8_t)((reg04 & ~BWM_CHG_VCHG_MASK) | ((code << BWM_CHG_VCHG_SHIFT) & BWM_CHG_VCHG_MASK));
if (I2C_BufferWrite(&reg04, 1, BWM_CHG_REG_VCHG, BWM_CHG_ADDR) == false) {
return 0;
}
return (uint16_t)(BWM_CHG_VCHG_BASE_MV + code * BWM_CHG_VCHG_STEP_MV);
}
// Program Design Capacity (and matching Design Energy). Idempotent: returns true
// without a config-update cycle if the value is already correct.
bool bwm_gauge_provision_capacity(uint16_t cap_mah) {
@@ -374,6 +415,9 @@ void bwm_detect_and_init(void) {
I2C_BufferWrite(&w, 1, 0x05, BWM_CHG_ADDR); // safety timer disabled (upstream)
w = 0x6B;
I2C_BufferWrite(&w, 1, 0x0B, BWM_CHG_ADDR); // pre-charge 11 mA
// Pin the charge-voltage target (chip POR is 4.2V); default 4100 -> 4.095V.
bwm_charger_set_vchg(BWM_DEFAULT_VCHG_MV);
}
#endif // WITH_BWM_STATUS
+6
View File
@@ -33,6 +33,7 @@
// Used as the default target for `hw bwmsetcap` and as the fall-back divisor for
// the battery-health estimate.
#define BWM_DEFAULT_DESIGN_CAP_MAH 500
#define BWM_DEFAULT_VCHG_MV 4100 // default charge-voltage target (mV); snaps to 4095 (15mV step)
#ifdef WITH_BWM_CHARGERKICK
// Emergency charge-path enable. Clears the AW32001 shipping/FET-disabled state so
@@ -58,6 +59,11 @@ bool bwm_gauge_provision_capacity(uint16_t cap_mah);
// Enable/disable battery charging (clear/set AW32001E CEB, REG01[3]).
// One-shot: reverts on the charger watchdog timeout (~160 s).
bool bwm_charger_set_charge(bool enable);
// Set the AW32001E charge-voltage regulation target (REG04 VBAT_REG). Clamps to a
// safe window, rounds to the nearest hardware step, preserves REG04[1:0]. Returns
// the actual mV applied, or 0 on I2C failure.
uint16_t bwm_charger_set_vchg(uint16_t mv);
#endif // WITH_BWM_STATUS
#ifdef WITH_BWM_LOWBATT_BEEP