Adding BWM Flashing instructions to PM5 Documentation

This commit is contained in:
Innocent Bystander committed 2026-09-09 21:14:26 -04:00
1 parent 9ec11eda2a
commit b3123d153f
1 file changed
+17 -1
@@ -104,7 +104,23 @@ hf 14a read --drop
## Do this exactly once.
* The very first time for a new battery:
```hw bwm setcap --cap 500```
* Do a full charge/discharge cycle for it to learn the real capacity.
* Your PM5 will learn about the battery through usage.
## Flash the BWM
* Make sure your BWM has enough charge in the battery `hw status` 50%+ should work.
* Get the latest firmware:
* Go [here](https://github.com/RfidResearchGroup/Proxmark5_BWM_esp32/actions/workflows/esp-idf-build.yml):
* Click on the latest workflow run (As of this writing that's "Merge pull request #3 from nieldk/master")
* Scroll all the way to the bottom, you'll see **Artifacts**
* Click on "proxmark5_bwm_master" which will start a download for `proxmark5_bwm_master.zip`
* Unzip this file somehwere, remember that location
* The upgrade command is: `hw bwm upgrade -f <PATH-TO>\proxmark5_ble_wifi_module.bin`
* This will take some time, you'll see the Progress in % displayed on the screen until the process is done.
* Once you see "BWM Rebooting into the new image" you know the upgrade finished.
* Wait a few seconds (under 10) and unplug and replug the Proxmark5 back into the usb port.
* Once reconnected, you can run `hw status` and you'll see:
* `BWM fw version......XX` where XX is the fw version.
* You have finished flashing the BWM.
### Operation