From b3123d153fc30c4632c8e8c14db3d1cc2a02ef22 Mon Sep 17 00:00:00 2001 From: Innocent Bystander Date: Wed, 9 Sep 2026 21:14:26 -0400 Subject: [PATCH] Adding BWM Flashing instructions to PM5 Documentation --- .../PM5_Start_Here/Getting_Started_With_PM5.md | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/doc/md/PM5_Start_Here/Getting_Started_With_PM5.md b/doc/md/PM5_Start_Here/Getting_Started_With_PM5.md index 42012b894..3013039a1 100644 --- a/doc/md/PM5_Start_Here/Getting_Started_With_PM5.md +++ b/doc/md/PM5_Start_Here/Getting_Started_With_PM5.md @@ -104,7 +104,23 @@ hf 14a read --drop ## Do this exactly once. * The very first time for a new battery: ```hw bwm setcap --cap 500``` -* Do a full charge/discharge cycle for it to learn the real capacity. +* Your PM5 will learn about the battery through usage. + +## Flash the BWM +* Make sure your BWM has enough charge in the battery `hw status` 50%+ should work. +* Get the latest firmware: + * Go [here](https://github.com/RfidResearchGroup/Proxmark5_BWM_esp32/actions/workflows/esp-idf-build.yml): + * Click on the latest workflow run (As of this writing that's "Merge pull request #3 from nieldk/master") + * Scroll all the way to the bottom, you'll see **Artifacts** + * Click on "proxmark5_bwm_master" which will start a download for `proxmark5_bwm_master.zip` + * Unzip this file somehwere, remember that location + * The upgrade command is: `hw bwm upgrade -f \proxmark5_ble_wifi_module.bin` + * This will take some time, you'll see the Progress in % displayed on the screen until the process is done. + * Once you see "BWM Rebooting into the new image" you know the upgrade finished. + * Wait a few seconds (under 10) and unplug and replug the Proxmark5 back into the usb port. + * Once reconnected, you can run `hw status` and you'll see: + * `BWM fw version......XX` where XX is the fw version. + * You have finished flashing the BWM. ### Operation