Merge pull request #3609 from innocentbystanderproxmark/pm5-bmw-flashing-instructions
Adding BWM Flashing instructions to PM5 Documentation
This commit is contained in:
1 file changed
+17
-1
@@ -104,7 +104,23 @@ hf 14a read --drop
|
||||
## Do this exactly once.
|
||||
* The very first time for a new battery:
|
||||
```hw bwm setcap --cap 500```
|
||||
* Do a full charge/discharge cycle for it to learn the real capacity.
|
||||
* Your PM5 will learn about the battery through usage.
|
||||
|
||||
## Flash the BWM
|
||||
* Make sure your BWM has enough charge in the battery `hw status` 50%+ should work.
|
||||
* Get the latest firmware:
|
||||
* Go [here](https://github.com/RfidResearchGroup/Proxmark5_BWM_esp32/actions/workflows/esp-idf-build.yml):
|
||||
* Click on the latest workflow run (As of this writing that's "Merge pull request #3 from nieldk/master")
|
||||
* Scroll all the way to the bottom, you'll see **Artifacts**
|
||||
* Click on "proxmark5_bwm_master" which will start a download for `proxmark5_bwm_master.zip`
|
||||
* Unzip this file somehwere, remember that location
|
||||
* The upgrade command is: `hw bwm upgrade -f <PATH-TO>\proxmark5_ble_wifi_module.bin`
|
||||
* This will take some time, you'll see the Progress in % displayed on the screen until the process is done.
|
||||
* Once you see "BWM Rebooting into the new image" you know the upgrade finished.
|
||||
* Wait a few seconds (under 10) and unplug and replug the Proxmark5 back into the usb port.
|
||||
* Once reconnected, you can run `hw status` and you'll see:
|
||||
* `BWM fw version......XX` where XX is the fw version.
|
||||
* You have finished flashing the BWM.
|
||||
|
||||
|
||||
### Operation
|
||||
|
||||
Reference in new issue
Block a user