FPGA: rename all ssp frame set/clr definition.

This commit is contained in:
dxl committed 2026-10-10 16:08:27 +08:00
1 parent 36bfb81538
commit 2b0514923d
4 files changed
+36 -36

No files matched your search

+10 -10
View File
@@ -115,15 +115,15 @@ always @(posedge adc_clk)
// TIMODE(FRAME_H) ~speed -> 9'd(512-64) speed -> 8'd(256-32)
// TIMODE(FRAME_L) ~speed -> 9'b0 speed -> 8'b0
`ifdef WITH_TIMODE
`define FRAME_SET_L 9'd448
`define FRAME_SET_H 8'd224
`define FRAME_CLR_L 9'd0
`define FRAME_CLR_H 8'd0
`define HI_FLITE_FRAME_SET_L 9'd448
`define HI_FLITE_FRAME_SET_H 8'd224
`define HI_FLITE_FRAME_CLR_L 9'd0
`define HI_FLITE_FRAME_CLR_H 8'd0
`else
`define FRAME_SET_L 9'd31
`define FRAME_SET_H 8'd15
`define FRAME_CLR_L 9'b1011111 // 95 = 96 - 1
`define FRAME_CLR_H 8'b101111 // 47 = 48 - 1
`define HI_FLITE_FRAME_SET_L 9'd31
`define HI_FLITE_FRAME_SET_H 8'd15
`define HI_FLITE_FRAME_CLR_L 9'b1011111 // 95 = 96 - 1
`define HI_FLITE_FRAME_CLR_H 8'b101111 // 47 = 48 - 1
`endif
always @(negedge adc_clk)
@@ -141,11 +141,11 @@ begin
ssp_clk <= 1'b0;
//create frame pulses. TBH, I still don't know what they do exactly, but they are crucial for ARM->FPGA transfer. If the frame is in the beginning of the byte, transfer slows to a crawl for some reason
// took me a day to figure THAT out.
if(( (~speed) && (ssp_cnt[8:0] == `FRAME_SET_L)) || (speed && ssp_cnt[7:0] == `FRAME_SET_H))
if(( (~speed) && (ssp_cnt[8:0] == `HI_FLITE_FRAME_SET_L)) || (speed && ssp_cnt[7:0] == `HI_FLITE_FRAME_SET_H))
begin
ssp_frame <= 1'b1;
end
if(( (~speed) && (ssp_cnt[8:0] == `FRAME_CLR_L)) || (speed && ssp_cnt[7:0] == `FRAME_CLR_H))
if(( (~speed) && (ssp_cnt[8:0] == `HI_FLITE_FRAME_CLR_L)) || (speed && ssp_cnt[7:0] == `HI_FLITE_FRAME_CLR_H))
begin
ssp_frame <= 1'b0;
end
+12 -12
View File
@@ -494,15 +494,15 @@ end
// generate a ssp clock and ssp frame signal for the synchronous transfer from/to the ARM
`ifdef WITH_TIMODE
`define FRAME_SET_8B 6'd56
`define FRAME_CLR_8B 6'd0
`define FRAME_SET_16B 7'd112
`define FRAME_CLR_16B 7'd0
`define HI_ISO14443A_FRAME_SET_8B 6'd56
`define HI_ISO14443A_FRAME_CLR_8B 6'd0
`define HI_ISO14443A_FRAME_SET_16B 7'd112
`define HI_ISO14443A_FRAME_CLR_16B 7'd0
`else
`define FRAME_SET_8B 6'd0
`define FRAME_CLR_8B 6'd8
`define FRAME_SET_16B 7'd7
`define FRAME_CLR_16B 7'd23
`define HI_ISO14443A_FRAME_SET_8B 6'd0
`define HI_ISO14443A_FRAME_CLR_8B 6'd8
`define HI_ISO14443A_FRAME_SET_16B 7'd7
`define HI_ISO14443A_FRAME_CLR_16B 7'd23
`endif
always @(negedge adc_clk)
@@ -517,10 +517,10 @@ begin
//ssp模式6D0,TI模式6D56,TI帧开始信号开始:最后一个ssp_clk拉高(64-8)的时候就拉高
// ssp_frame rising edge indicates start of frame
if(negedge_cnt[5:0] == `FRAME_SET_8B)
if(negedge_cnt[5:0] == `HI_ISO14443A_FRAME_SET_8B)
ssp_frame <= 1'b1;
//ssp模式6D8,TI模式6D0,TI帧开始信号结束:在第一次ssp_clk拉高的时候就拉低(清除上一个周期拉高)
if(negedge_cnt[5:0] == `FRAME_CLR_8B)
if(negedge_cnt[5:0] == `HI_ISO14443A_FRAME_CLR_8B)
ssp_frame <= 1'b0;
end
else
@@ -531,9 +531,9 @@ begin
if(negedge_cnt[3:0] == 4'd8) // Low level for 8 cycles (falling edge at cycle 8)
ssp_clk <= 1'b0;
if(negedge_cnt[6:0] == `FRAME_SET_16B) // ssp_frame rising edge indicates start of frame, sampled on falling edge of ssp_clk
if(negedge_cnt[6:0] == `HI_ISO14443A_FRAME_SET_16B) // ssp_frame rising edge indicates start of frame, sampled on falling edge of ssp_clk
ssp_frame <= 1'b1;
if(negedge_cnt[6:0] == `FRAME_CLR_16B)
if(negedge_cnt[6:0] == `HI_ISO14443A_FRAME_CLR_16B)
ssp_frame <= 1'b0;
end
end
+6 -6
View File
@@ -369,11 +369,11 @@ begin
end
`ifdef WITH_TIMODE // In TI mode, the frame signal goes high during the last `ssp_clk` pulse (at the 60th clock cycle, i.e., 64-4).
`define FRAME_SET 6'd60
`define FRAME_CLR 6'd0
`define HI_READER_FRAME_SET 6'd60
`define HI_READER_FRAME_CLR 6'd0
`else
`define FRAME_SET 6'd1
`define FRAME_CLR 6'd3
`define HI_READER_FRAME_SET 6'd1
`define HI_READER_FRAME_CLR 6'd3
`endif
// ssp clock and frame signal for communication to and from ARM, not SPI TI-MODE
@@ -396,10 +396,10 @@ begin
// set ssp_frame signal for corr_i_cnt = 1..3
// (send one frame with 16 Bits)
if (corr_i_cnt == `FRAME_SET)
if (corr_i_cnt == `HI_READER_FRAME_SET)
ssp_frame <= 1'b1;
if (corr_i_cnt == `FRAME_CLR)
if (corr_i_cnt == `HI_READER_FRAME_CLR)
ssp_frame <= 1'b0;
end
+8 -8
View File
@@ -112,11 +112,11 @@ end
// This means an 8-bit transfer; in SSP mode, the frame signal is driven high at bit 1 (clock rising edge) and low at bit 5 (clock falling edge).
// To switch to TI mode, this must be changed to the rising edge of the final cycle: driving high at bit 14 (rising edge) and low at bit 0 (falling edge).
`ifdef WITH_TIMODE
`define FRAME_SET_212K 4'd14
`define FRAME_CLR_212K 4'd0
`define HI_SIMULATE_FRAME_SET_212K 4'd14
`define HI_SIMULATE_FRAME_CLR_212K 4'd0
`else
`define FRAME_SET_212K 4'd1
`define FRAME_CLR_212K 4'd5
`define HI_SIMULATE_FRAME_SET_212K 4'd1
`define HI_SIMULATE_FRAME_CLR_212K 4'd5
`endif
// Produce the byte framing signal; the phase of this signal
@@ -125,16 +125,16 @@ always @(negedge adc_clk)
begin
if (mod_type == `FPGA_HF_SIMULATOR_MODULATE_212K)
begin
if (ssp_clk_divider[8:5] == `FRAME_SET_212K)
if (ssp_clk_divider[8:5] == `HI_SIMULATE_FRAME_SET_212K)
ssp_frame <= 1'b1;
if (ssp_clk_divider[8:5] == `FRAME_CLR_212K)
if (ssp_clk_divider[8:5] == `HI_SIMULATE_FRAME_CLR_212K)
ssp_frame <= 1'b0;
end
else
begin
if (ssp_clk_divider[7:4] == `FRAME_SET_212K)
if (ssp_clk_divider[7:4] == `HI_SIMULATE_FRAME_SET_212K)
ssp_frame <= 1'b1;
if (ssp_clk_divider[7:4] == `FRAME_CLR_212K)
if (ssp_clk_divider[7:4] == `HI_SIMULATE_FRAME_CLR_212K)
ssp_frame <= 1'b0;
end
end