Reword readme

This commit is contained in:
George Hilliard committed 2020-07-02 08:49:00 -05:00
1 parent 5583313394
commit a562dcdba2
1 file changed
+5 -2
+5 -2
View File
@@ -63,9 +63,12 @@ Copy and modify the `sample_config.toml` to specify the address, username, and p
Each `[[cameras]]` block creates a new camera; the `name` determines the RTSP path you should connect your client to.
Currently Neolink cannot auto-detect cameras like the official clients do; you must specify their IP addresses directly.
By default the h265 streaming format is used. Some cameras, for example E1, provide h264 streams, to use these you must specify `format = "h264"` in the `[[cameras]]` config.
By default the H265 video format is used. Some cameras, for example E1, provide H264 streams. To use these you must specify `format = "h264"` in the `[[cameras]]` config.
Soon this will be auto-detected, and you will not have to know or care about the format.
By default the HD stream is mounted at `name` and at `name/mainStream` and the SD stream is mounted at `name/subStream`. You can specify mounting only one by adding `stream = "subStream"` to the `[[cameras]]` config. You may also need to use `h264` format while using the SD stream.
By default, the HD stream is available at the RTSP path `/name` or `/name/mainStream`, and the SD stream is available at `/name/subStream`.
You can disable the HD stream by adding `stream = "subStream"` to the `[[cameras]]` config.
You may also need to use `h264` format while using the SD stream.
By default Neolink serves on all IP addresses on port 8554.
You can modify this by changing the `bind` and the `bind_port` parameter.