diff --git a/README.md b/README.md index b26233c..aabf432 100644 --- a/README.md +++ b/README.md @@ -63,9 +63,12 @@ Copy and modify the `sample_config.toml` to specify the address, username, and p Each `[[cameras]]` block creates a new camera; the `name` determines the RTSP path you should connect your client to. Currently Neolink cannot auto-detect cameras like the official clients do; you must specify their IP addresses directly. -By default the h265 streaming format is used. Some cameras, for example E1, provide h264 streams, to use these you must specify `format = "h264"` in the `[[cameras]]` config. +By default the H265 video format is used. Some cameras, for example E1, provide H264 streams. To use these you must specify `format = "h264"` in the `[[cameras]]` config. +Soon this will be auto-detected, and you will not have to know or care about the format. -By default the HD stream is mounted at `name` and at `name/mainStream` and the SD stream is mounted at `name/subStream`. You can specify mounting only one by adding `stream = "subStream"` to the `[[cameras]]` config. You may also need to use `h264` format while using the SD stream. +By default, the HD stream is available at the RTSP path `/name` or `/name/mainStream`, and the SD stream is available at `/name/subStream`. +You can disable the HD stream by adding `stream = "subStream"` to the `[[cameras]]` config. +You may also need to use `h264` format while using the SD stream. By default Neolink serves on all IP addresses on port 8554. You can modify this by changing the `bind` and the `bind_port` parameter.