Updated Configuration Variables (CV) List (markdown)
1 parent
7f0a962633
commit
d547a5760e
1 file changed
+10
-2
@@ -1,6 +1,14 @@
|
||||
# Comments regarding Configuration Variables:
|
||||
CV.h contains default values for every CV. When your board is still "factory new" these values are automatically written into flash. CV_65 == 255 indicates a factory condition and resets all CVs to default. Alternatively to reset all CVs to default a value of 8 can be written to CV8. Also note that index 0 in the CV array corresponds with CV_1, index 1 corresponds with CV_2 and so forth. This list only contains CVs that are in use.
|
||||
|
||||
# Speed step configuration:
|
||||

|
||||
* V_min = CV_2
|
||||
* V_mid = CV_6 * 16
|
||||
* V_max = CV_5 * 16
|
||||
|
||||
The illustration above shows how the speed steps can be configured using the corresponding CVs. The red * represents V_min which is always at speed step 1, the green * shows V_mid at speed step 64 and the blue * shows V_max at speed step 126.
|
||||
|
||||
# CV List:
|
||||
|
||||
#### CV_1 - Basic address
|
||||
@@ -16,10 +24,10 @@ CV_3*CV_175 = Time for one discrete speed step change in ms
|
||||
CV_4*CV_175 = Time for one discrete speed step change in ms
|
||||
|
||||
#### CV_5 - V_max
|
||||
Max motor voltage/speed
|
||||
Max motor voltage/speed - V_max = CV_5 * 16
|
||||
|
||||
#### CV_6 - V_mid
|
||||
Mid motor voltage/speed
|
||||
Mid motor voltage/speed - V_max = CV_6 * 16
|
||||
|
||||
#### CV_7 - Version No. (Read-Only)
|
||||
Rev 0.3 = 1
|
||||
|
||||
Reference in new issue
Block a user