make more variables const
This commit is contained in:
1 parent
5ae65b301d
commit
02e1fdf156
3 files changed
+71
-74
No files matched your search
@@ -13,27 +13,27 @@ absolute_time_t falling_edge_time,rising_edge_time;
|
||||
|
||||
|
||||
// Function returns average of values deviating less than twice the standard deviation from original average
|
||||
float two_std_dev(const float arr[], uint32_t length){
|
||||
float two_std_dev(const float arr[], const uint32_t length){
|
||||
// Calculate arithmetic average
|
||||
float sum = 0;
|
||||
for (uint32_t i = 0; i < length; ++i) {
|
||||
sum += arr[i];
|
||||
}
|
||||
float x_avg = sum / (float)length;
|
||||
const float x_avg = sum / (float)length;
|
||||
|
||||
// Calculate sample variance and sampled standard deviation
|
||||
sum = 0;
|
||||
for (uint32_t i = 0; i < length; ++i) {
|
||||
sum += (arr[i]-x_avg)*(arr[i]-x_avg);
|
||||
}
|
||||
float variance = sum / (float)(length-1);
|
||||
float std_dev = sqrtf(variance);
|
||||
const float variance = sum / (float)(length-1);
|
||||
const float std_dev = sqrtf(variance);
|
||||
|
||||
// Sum every element that is within two times the sampled standard deviation and compute new average
|
||||
sum = 0;
|
||||
uint32_t counter = 0;
|
||||
for (uint32_t i = 0; i < length; ++i) {
|
||||
float diff = fabsf(arr[i]-x_avg);
|
||||
const float diff = fabsf(arr[i]-x_avg);
|
||||
if ( diff < std_dev*2.0f ){
|
||||
sum += arr[i];
|
||||
counter++;
|
||||
@@ -74,10 +74,10 @@ void adc_offset_adjustment(uint32_t n){
|
||||
adc_fifo_drain();
|
||||
|
||||
// Find overall average discarding outliers in measurement
|
||||
float offset_avg_fwd = two_std_dev(offsets_fwd, n);
|
||||
float offset_avg_rev = two_std_dev(offsets_rev, n);
|
||||
float overall_avg = (offset_avg_fwd+offset_avg_rev)/2;
|
||||
uint8_t offset = (uint8_t)roundf(overall_avg);
|
||||
const float offset_avg_fwd = two_std_dev(offsets_fwd, n);
|
||||
const float offset_avg_rev = two_std_dev(offsets_rev, n);
|
||||
const float overall_avg = (offset_avg_fwd+offset_avg_rev)/2;
|
||||
const uint8_t offset = (uint8_t)roundf(overall_avg);
|
||||
|
||||
LOG(1, "new adc offset CV[171] (%f): (uint8_t)%d\n", overall_avg, offset);
|
||||
|
||||
@@ -93,7 +93,7 @@ void adc_offset_adjustment(uint32_t n){
|
||||
// Confirmation after writing or verifying a CV
|
||||
// Works by creating a spike in current consumption, this is detected by the command station
|
||||
void acknowledge() {
|
||||
uint16_t max_lvl = _125M/(CV_ARRAY_FLASH[8]*100+10000);
|
||||
const uint16_t max_lvl = _125M/(CV_ARRAY_FLASH[8]*100+10000);
|
||||
pwm_set_gpio_level(MOTOR_FWD_PIN, max_lvl);
|
||||
busy_wait_ms(3);
|
||||
pwm_set_gpio_level(MOTOR_FWD_PIN, 0);
|
||||
@@ -104,9 +104,9 @@ void acknowledge() {
|
||||
|
||||
|
||||
// When bit matches sent byte -> acknowledge()
|
||||
void verify_cv_bit(uint16_t cv_address,bool bit_val, uint8_t bit_pos) {
|
||||
uint8_t mask = 0b00000001;
|
||||
bool res = ( (CV_ARRAY_FLASH[cv_address] >> bit_pos) &mask ) == bit_val;
|
||||
void verify_cv_bit(const uint16_t cv_address,bool bit_val, uint8_t bit_pos) {
|
||||
const uint8_t mask = 0b00000001;
|
||||
const bool res = ( (CV_ARRAY_FLASH[cv_address] >> bit_pos) &mask ) == bit_val;
|
||||
if (res) {
|
||||
acknowledge();
|
||||
}
|
||||
@@ -114,13 +114,13 @@ void verify_cv_bit(uint16_t cv_address,bool bit_val, uint8_t bit_pos) {
|
||||
|
||||
|
||||
// When byte matches sent byte -> acknowledge()
|
||||
void verify_cv_byte(uint16_t cv_address, uint8_t cv_data){
|
||||
void verify_cv_byte(const uint16_t cv_address, const uint8_t cv_data){
|
||||
if (CV_ARRAY_FLASH[cv_address] == cv_data) acknowledge();
|
||||
}
|
||||
|
||||
|
||||
// CV writing function first erases necessary amount of blocks in flash and then rewrites to flash
|
||||
void regular_cv_write(uint16_t cv_index, uint8_t cv_data){
|
||||
void regular_cv_write(const uint16_t cv_index, const uint8_t cv_data){
|
||||
uint8_t CV_ARRAY_TEMP[CV_ARRAY_SIZE];
|
||||
memcpy(CV_ARRAY_TEMP, CV_ARRAY_FLASH, sizeof(CV_ARRAY_TEMP));
|
||||
CV_ARRAY_TEMP[cv_index] = cv_data;
|
||||
@@ -131,14 +131,13 @@ void regular_cv_write(uint16_t cv_index, uint8_t cv_data){
|
||||
|
||||
|
||||
// There are some exceptions to writing CVs - e.g. writing to a read only CV is not valid - this gets handled here
|
||||
void write_cv_handler(uint16_t cv_index, uint8_t cv_data){
|
||||
void write_cv_handler(const uint16_t cv_index, const uint8_t cv_data){
|
||||
switch (cv_index) {
|
||||
case 0: //CV_1
|
||||
// CV_1 => Value = 0 is not allowed
|
||||
if (cv_data == 0 || cv_data > 127)
|
||||
break;
|
||||
else
|
||||
regular_cv_write(cv_index,cv_data);
|
||||
regular_cv_write(cv_index,cv_data);
|
||||
break;
|
||||
case 6: //CV_7
|
||||
// Read only (CV_7 - Version no.)
|
||||
@@ -162,14 +161,12 @@ void write_cv_handler(uint16_t cv_index, uint8_t cv_data){
|
||||
case 16: //CV_17
|
||||
if ( (cv_data < 192 || cv_data > 231) || (CV_ARRAY_FLASH[17] == 0 && cv_data == 192) )
|
||||
break;
|
||||
else
|
||||
regular_cv_write(cv_index,cv_data);
|
||||
regular_cv_write(cv_index,cv_data);
|
||||
break;
|
||||
case 17: //CV_18
|
||||
if(CV_ARRAY_FLASH[16] == 192 && cv_data == 0)
|
||||
break;
|
||||
else
|
||||
regular_cv_write(cv_index,cv_data);
|
||||
regular_cv_write(cv_index,cv_data);
|
||||
break;
|
||||
// CV_31 & CV_32 Index high byte isn't implemented and shall not be set
|
||||
case 30: //CV_31
|
||||
@@ -183,14 +180,14 @@ void write_cv_handler(uint16_t cv_index, uint8_t cv_data){
|
||||
|
||||
|
||||
// CV Programming function resets core1 and evaluates the type of programming instruction (e.g. write byte)
|
||||
void program_mode(uint8_t number_of_bytes, const uint8_t * const byte_array) {
|
||||
void program_mode(const uint8_t number_of_bytes, const uint8_t * const byte_array) {
|
||||
//First check for valid programming command ("address" 112-127)
|
||||
if (byte_array[number_of_bytes - 1]<128 && byte_array[number_of_bytes - 1]>111) {
|
||||
uint8_t instruction_type_mask = 0b00001100;
|
||||
uint8_t instruction_type = instruction_type_mask & byte_array[number_of_bytes - 1];
|
||||
uint8_t cv_address_ms_bits_mask = 0b00000011;
|
||||
uint16_t cv_address_ms_bits = cv_address_ms_bits_mask & byte_array[number_of_bytes - 1];
|
||||
uint16_t cv_address = byte_array[number_of_bytes - 2] + (cv_address_ms_bits << 8);
|
||||
const uint8_t instruction_type_mask = 0b00001100;
|
||||
const uint8_t instruction_type = instruction_type_mask & byte_array[number_of_bytes - 1];
|
||||
const uint8_t cv_address_ms_bits_mask = 0b00000011;
|
||||
const uint16_t cv_address_ms_bits = cv_address_ms_bits_mask & byte_array[number_of_bytes - 1];
|
||||
const uint16_t cv_address = byte_array[number_of_bytes - 2] + (cv_address_ms_bits << 8);
|
||||
|
||||
// Before accessing flash, timers and interrupts need to be disabled and core1 needs to be shut down.
|
||||
if(pid_control_timer.pool)
|
||||
@@ -200,27 +197,27 @@ void program_mode(uint8_t number_of_bytes, const uint8_t * const byte_array) {
|
||||
|
||||
multicore_reset_core1();
|
||||
|
||||
uint32_t saved_interrupts = save_and_disable_interrupts();
|
||||
const uint32_t saved_interrupts = save_and_disable_interrupts();
|
||||
|
||||
// Verify CV bit instruction
|
||||
if (instruction_type == 0b000001000) {
|
||||
uint8_t bit_pos_mask = 0b00000111;
|
||||
uint8_t bit_pos = bit_pos_mask&byte_array[number_of_bytes - 3];
|
||||
uint8_t bit_val_mask = 0b00000001;
|
||||
uint8_t bit_val_uint = (byte_array[number_of_bytes - 3]>>3) & bit_val_mask;
|
||||
bool bit_val = bit_val_uint;
|
||||
const uint8_t bit_pos_mask = 0b00000111;
|
||||
const uint8_t bit_pos = bit_pos_mask&byte_array[number_of_bytes - 3];
|
||||
const uint8_t bit_val_mask = 0b00000001;
|
||||
const uint8_t bit_val_uint = (byte_array[number_of_bytes - 3]>>3) & bit_val_mask;
|
||||
const bool bit_val = bit_val_uint;
|
||||
verify_cv_bit(cv_address, bit_val, bit_pos);
|
||||
}
|
||||
|
||||
// Verify CV byte instruction
|
||||
else if (instruction_type == 0b000000100) {
|
||||
uint8_t cv_data = byte_array[number_of_bytes - 3];
|
||||
const uint8_t cv_data = byte_array[number_of_bytes - 3];
|
||||
verify_cv_byte(cv_address, cv_data);
|
||||
}
|
||||
|
||||
// Write CV byte instruction
|
||||
else if (instruction_type == 0b000001100) {
|
||||
uint8_t cv_data = byte_array[number_of_bytes - 3];
|
||||
const uint8_t cv_data = byte_array[number_of_bytes - 3];
|
||||
write_cv_handler(cv_address, cv_data);
|
||||
}
|
||||
|
||||
@@ -232,9 +229,9 @@ void program_mode(uint8_t number_of_bytes, const uint8_t * const byte_array) {
|
||||
|
||||
|
||||
// Set outputs according to configuration (PWM on/off, PWM duty cycle/level, ...)
|
||||
void set_outputs(uint32_t functions_to_set_bitmask) {
|
||||
void set_outputs(const uint32_t functions_to_set_bitmask) {
|
||||
// Get outputs with pwm enabled and preset outputs_to_set_PWM variable with resulting GPIO Bitmask
|
||||
uint32_t PWM_enabled_outputs = get_32bit_CV(111);
|
||||
const uint32_t PWM_enabled_outputs = get_32bit_CV(111);
|
||||
uint32_t outputs_to_set_PWM = PWM_enabled_outputs;
|
||||
|
||||
// Get enabled output configuration corresponding to set functions and direction
|
||||
@@ -340,8 +337,8 @@ bool address_evaluation(const uint8_t number_of_bytes,const uint8_t * const byte
|
||||
{
|
||||
// Short Address Package
|
||||
// start of transmission -> address_byte_0 -> ... -> end of transmission
|
||||
read_address = (byte_array[number_of_bytes - 1]);
|
||||
return (CV_ARRAY_FLASH[0] == read_address);
|
||||
read_address = byte_array[number_of_bytes - 1];
|
||||
return CV_ARRAY_FLASH[0] == read_address;
|
||||
}
|
||||
}
|
||||
|
||||
@@ -408,14 +405,14 @@ void instruction_evaluation(const uint8_t number_of_bytes,const uint8_t * const
|
||||
|
||||
|
||||
// Check for reset package - When reset package is found stop the motor and disable all functions
|
||||
bool reset_package_check(uint8_t number_of_bytes,const uint8_t * const byte_array){
|
||||
bool reset_package_check(const uint8_t number_of_bytes,const uint8_t * const byte_array){
|
||||
if (byte_array[number_of_bytes-1] == 0b00000000 && byte_array[number_of_bytes-2] == 0b00000000){
|
||||
uint32_t speed_step = 1;
|
||||
const uint32_t speed_step = 1;
|
||||
multicore_fifo_push_blocking(speed_step); // Emergency Stop
|
||||
update_active_functions(0,0,0); // Disables all functions
|
||||
return true;
|
||||
}
|
||||
else return false;
|
||||
return false;
|
||||
}
|
||||
|
||||
|
||||
@@ -476,7 +473,7 @@ void evaluation(){
|
||||
|
||||
|
||||
// DCC-Signal (GPIO 21) rising edge interrupt
|
||||
void track_signal_rise(unsigned int gpio, long unsigned int events) {
|
||||
void track_signal_rise(const unsigned int gpio, const long unsigned int events) {
|
||||
// Save current timer value
|
||||
rising_edge_time = get_absolute_time();
|
||||
// Disable rising edge interrupt and enable falling edge interrupt
|
||||
@@ -486,7 +483,7 @@ void track_signal_rise(unsigned int gpio, long unsigned int events) {
|
||||
|
||||
|
||||
// DCC-Signal (GPIO 21) falling edge interrupt
|
||||
void track_signal_fall(unsigned int gpio, long unsigned int events) {
|
||||
void track_signal_fall( const unsigned int gpio, const long unsigned int events) {
|
||||
// Save current timer value
|
||||
falling_edge_time = get_absolute_time();
|
||||
// Time difference is equal to the time the signal was in a logical high state
|
||||
@@ -531,7 +528,7 @@ void init_outputs(){
|
||||
|
||||
|
||||
// Measures "base" pwm duty cycle needed to overcome friction
|
||||
uint16_t measure_base_pwm(bool direction, uint8_t iterations){
|
||||
uint16_t measure_base_pwm(const bool direction, const uint8_t iterations){
|
||||
uint gpio;
|
||||
if (direction) gpio = MOTOR_FWD_PIN;
|
||||
else gpio = MOTOR_REV_PIN;
|
||||
@@ -633,7 +630,7 @@ bool get_direction(bool *direction_ptr){
|
||||
|
||||
|
||||
// Motor PWM initialization
|
||||
void init_motor_pwm(uint8_t gpio) {
|
||||
void init_motor_pwm(const uint8_t gpio) {
|
||||
const uint16_t wrap_counter = (_125M/(CV_ARRAY_FLASH[8]*100+10000)) - 1;
|
||||
const uint32_t slice_num = pwm_gpio_to_slice_num(gpio);
|
||||
pwm_set_clkdiv_int_frac(slice_num,CV_ARRAY_FLASH[173],0);
|
||||
|
||||
@@ -12,7 +12,7 @@ struct repeating_timer pid_control_timer,speed_helper_timer;
|
||||
void update_speed_dir(pid_params *pid, uint32_t speed_step_target){
|
||||
pid->speed_step_target = speed_step_target;
|
||||
// When CV_29 Bit 0 is set direction is reversed
|
||||
bool reverse_dir = CV_ARRAY_FLASH[28] & 0b00000001;
|
||||
const bool reverse_dir = CV_ARRAY_FLASH[28] & 0b00000001;
|
||||
// Forward
|
||||
if(speed_step_target > 127) {
|
||||
pid->direction = true^reverse_dir;
|
||||
@@ -34,12 +34,12 @@ void update_speed_dir(pid_params *pid, uint32_t speed_step_target){
|
||||
|
||||
// This function gets called every x milliseconds where x is CV_175.
|
||||
// The purpose of this function is to implement a time delay in acceleration or deceleration
|
||||
bool speed_helper(struct repeating_timer *t) {
|
||||
bool speed_helper(struct repeating_timer *const t) {
|
||||
// pid->setpoint only gets adjusted when the speed_helper_counter is equal to the accel_rate/decel_rate
|
||||
// -> Time for 1 Speed Step := (speed_helper timer delay)*(accel_rate) or CV_175*CV_3 or CV_175*CV_4
|
||||
pid_params *pid = (pid_params *)(t->user_data);
|
||||
uint8_t accel_rate = CV_ARRAY_FLASH[2];
|
||||
uint8_t decel_rate = CV_ARRAY_FLASH[3];
|
||||
const uint8_t accel_rate = CV_ARRAY_FLASH[2];
|
||||
const uint8_t decel_rate = CV_ARRAY_FLASH[3];
|
||||
static bool prev_dir;
|
||||
static uint8_t speed_helper_counter;
|
||||
static uint8_t speed_table_index;
|
||||
@@ -89,7 +89,7 @@ bool speed_helper(struct repeating_timer *t) {
|
||||
|
||||
|
||||
// Helper function to adjust pwm level/duty cycle.
|
||||
void adjust_pwm_level(uint16_t level, pid_params *pid) {
|
||||
void adjust_pwm_level(const uint16_t level, const pid_params *pid) {
|
||||
// Forward
|
||||
if (pid->direction) {
|
||||
pwm_set_gpio_level(MOTOR_REV_PIN, 0);
|
||||
@@ -104,14 +104,14 @@ void adjust_pwm_level(uint16_t level, pid_params *pid) {
|
||||
|
||||
|
||||
// Update feed-forward slope/gradient for both directions
|
||||
void update_m(pid_params *pid){
|
||||
void update_m(pid_params *const pid){
|
||||
pid->m_fwd = (pid->y_2_fwd-pid->y_1_fwd)/(pid->x_2_fwd-pid->x_1_fwd);
|
||||
pid->m_rev = (pid->y_2_rev-pid->y_1_rev)/(pid->x_2_rev-pid->x_1_rev);
|
||||
}
|
||||
|
||||
|
||||
// Update feedforward function value y_2 in both directions
|
||||
void update_y(pid_params *pid,float i){
|
||||
void update_y(pid_params *const pid, const float i){
|
||||
// Forward
|
||||
if(pid->direction) {
|
||||
pid->y_2_fwd += i*pid->k_ff;
|
||||
@@ -132,7 +132,7 @@ void update_y(pid_params *pid,float i){
|
||||
|
||||
|
||||
// Returns feedforward value corresponding to current setpoint
|
||||
float get_ff_val(pid_params *pid){
|
||||
float get_ff_val(const pid_params *const pid){
|
||||
float val;
|
||||
// Forward
|
||||
if(pid->direction){
|
||||
@@ -147,7 +147,7 @@ float get_ff_val(pid_params *pid){
|
||||
|
||||
|
||||
// Returns proportional gain value corresponding to current setpoint
|
||||
float get_kp(pid_params *pid){
|
||||
float get_kp(const pid_params *const pid){
|
||||
float sp = (float)pid->setpoint;
|
||||
if (sp < pid->k_p_x_1){
|
||||
return pid->k_p_m_1 * sp + pid->k_p_y_0;
|
||||
@@ -171,7 +171,7 @@ bool pid_control(struct repeating_timer *t){
|
||||
}
|
||||
|
||||
// Get feed-forward and proportional gain values
|
||||
float feed_fwd = get_ff_val(pid);
|
||||
const float feed_fwd = get_ff_val(pid);
|
||||
pid->k_p = get_kp(pid);
|
||||
|
||||
// Measure BEMF voltage and compute error
|
||||
@@ -180,16 +180,16 @@ bool pid_control(struct repeating_timer *t){
|
||||
pid->l_side_arr_cutoff,
|
||||
pid->r_side_arr_cutoff,
|
||||
pid->direction);
|
||||
float e = (float)pid->setpoint - (pid->measurement - pid->adc_offset);
|
||||
const float e = (float)pid->setpoint - (pid->measurement - pid->adc_offset);
|
||||
|
||||
// Proportional part, integral part and derivative part (including digital low-pass-filter with time constant tau)
|
||||
float p = pid->k_p * e;
|
||||
const float p = pid->k_p * e;
|
||||
float i = pid->ci_0*(e + pid->e_prev) + pid->i_prev;
|
||||
float d = pid->cd_0*(pid->measurement-pid->measurement_prev)+pid->cd_1*pid->d_prev;
|
||||
const float d = pid->cd_0*(pid->measurement-pid->measurement_prev)+pid->cd_1*pid->d_prev;
|
||||
|
||||
// Check for limits on the integral part
|
||||
if (i > pid->int_lim_max)i = pid->int_lim_max;
|
||||
else if (i < pid->int_lim_min)i = pid->int_lim_min;
|
||||
if (i > pid->int_lim_max) i = pid->int_lim_max;
|
||||
else if (i < pid->int_lim_min) i = pid->int_lim_min;
|
||||
|
||||
// Sum feed forward + all controller terms (p+i+d). Limit Output from 0% to 100% duty cycle
|
||||
float output = feed_fwd+p+i+d;
|
||||
@@ -226,7 +226,7 @@ bool pid_control(struct repeating_timer *t){
|
||||
|
||||
|
||||
// PID controller and measurement parameter, and speed_table initialization
|
||||
void init_pid(pid_params *pid){
|
||||
void init_pid(pid_params *const pid){
|
||||
// Measurement variables initialization
|
||||
pid->adc_offset = (float)CV_ARRAY_FLASH[171];
|
||||
pid->msr_total_iterations = CV_ARRAY_FLASH[60];
|
||||
@@ -236,15 +236,15 @@ void init_pid(pid_params *pid){
|
||||
|
||||
// Speed table initialization
|
||||
// Calculate speed setpoint table according to V_min, V_max and V_mid CVs
|
||||
double v_min = (double)CV_ARRAY_FLASH[1];
|
||||
double v_mid = (double)CV_ARRAY_FLASH[5]*16;
|
||||
double v_max = (double)CV_ARRAY_FLASH[4]*16;
|
||||
const double v_min = (double)CV_ARRAY_FLASH[1];
|
||||
const double v_mid = (double)CV_ARRAY_FLASH[5]*16;
|
||||
const double v_max = (double)CV_ARRAY_FLASH[4]*16;
|
||||
|
||||
LOG(1, "speedtable min(%f) mid(%f) max(%f)\n", v_min, v_mid, v_max);
|
||||
|
||||
double delta_x = 63;
|
||||
double m_1 = (v_mid-v_min)/delta_x;
|
||||
double m_2 = (v_max-v_mid)/delta_x;
|
||||
const double delta_x = 63;
|
||||
const double m_1 = (v_mid-v_min)/delta_x;
|
||||
const double m_2 = (v_max-v_mid)/delta_x;
|
||||
pid->speed_table[0] = 0;
|
||||
for (uint8_t i = 1; i < 64; ++i) {
|
||||
pid->speed_table[i] = (uint16_t)lround(m_1*(i-1)+v_min);
|
||||
@@ -319,7 +319,7 @@ void core1_entry() {
|
||||
// Note: Pointer will be cast into uint32_t and then back into bool * on core0 (Both 32-Bit Datatype).
|
||||
// This is done only to accommodate the correct data type associated with multicore_fifo_push_blocking().
|
||||
multicore_fifo_push_blocking((uint32_t) &(pid->direction));
|
||||
uint64_t packet_timeout_threshold_in_us = CV_ARRAY_FLASH[10]*1000000;
|
||||
const uint64_t packet_timeout_threshold_in_us = CV_ARRAY_FLASH[10]*1000000;
|
||||
absolute_time_t time_last_update = get_absolute_time();
|
||||
// printf("core1 done\n");
|
||||
while (1){
|
||||
|
||||
@@ -62,10 +62,10 @@ typedef struct pid_params{
|
||||
|
||||
void update_speed_dir(pid_params *pid, uint32_t speed_step_target);
|
||||
bool speed_helper(struct repeating_timer *t);
|
||||
void adjust_pwm_level(uint16_t level, pid_params *pid);
|
||||
void adjust_pwm_level(uint16_t level, const pid_params *pid);
|
||||
void update_m(pid_params *pid);
|
||||
void update_y(pid_params *pid,float i);
|
||||
float get_ff_val(pid_params *pid);
|
||||
float get_kp(pid_params *pid);
|
||||
float get_ff_val(const pid_params *pid);
|
||||
float get_kp(const pid_params *pid);
|
||||
bool pid_control(struct repeating_timer *t);
|
||||
void init_pid(pid_params *pid);
|
||||
void init_pid( pid_params * pid);
|
||||
Reference in new issue
Block a user