Compare commits

..
17 Commits
Author SHA1 Message Date
ManuelW77 8f4c67eb46 docs: update platformio.ini for version v3.4.10 2026-10-03 11:55:06 +02:00
ManuelW cb3d3952b0 Merge pull request #30 from anderl1969/fix/main-loop-indentation
style: fix indentation in main loop
2026-10-03 11:54:16 +02:00
anderl1969 3662422c1c style: fix indentation in main loop 2026-09-30 16:23:45 +02:00
ManuelW77 a04cc37190 docs: update platformio.ini for version v3.4.9 2026-09-20 13:44:05 +02:00
ManuelW 7e6854cd8a Merge pull request #28 from Fire-Devils/feature/wifi-txpower-setting
Make WiFi TX power configurable, document ESP32-S3 pins
2026-09-20 12:46:54 +02:00
ManuelW77andClaude Opus 5 a5ba8a901a Make WiFi TX power configurable, document ESP32-S3 pins
The transmit power was hardcoded to 19.5 dBm. Some setups need a lower
value (device right next to the AP, weak 3.3V rail), so it is now a user
setting instead of a per-chip constant.

- wlan.cpp: load/save/apply TX power (0.1 dBm steps, NVS key wifi_txpwr,
  default 195), re-applied on GOT_IP so it survives a reconnect
- website.cpp: /api/wifi-power GET/POST with validation
- setup.html: "WiFi Settings" card
- README.md/README.de.md: pin table gets an ESP32-S3 column plus a warning
  that GPIO19/20 are the native USB data lines
- config.cpp: same warning next to the HX711 pin definitions

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-09-20 12:42:13 +02:00
ManuelW b8cfa1ce98 Merge pull request #27 from KollegeChris/main
Optimizations for ESP32S3
2026-09-20 12:40:37 +02:00
Christoph Stoiber 884c8bcf8f Comment adjusted for ESP32-S3 2026-09-18 13:09:31 +02:00
Christoph Stoiber 502c1d6ab8 Restore wlan power 2026-09-18 13:05:00 +02:00
Christoph Stoiber 3e995faa8c Changed HX711 Pins 2026-09-18 12:06:50 +02:00
Christoph Stoiber 4b93362dd7 Improved for ESP32S3 2026-09-17 18:07:53 +02:00
ManuelW 9a1d394bc8 Merge pull request #26 from anderl1969/doc/printfileslite
Doc/printfileslite
2026-08-27 13:47:02 +02:00
anderl1969 fab9fdae87 Add readme for FilaMan Lite with version details
Added details about low and high version casing dimensions and NFC connection issues.
2026-08-25 09:10:10 +02:00
anderl1969 1939c1b57f Add print files section to english NFC-only mode documentation
Added section for print files with STL links.
2026-08-25 09:01:58 +02:00
anderl1969 026cbd5179 Fix link to STL files in NFC-only mode documentation 2026-08-25 09:00:40 +02:00
anderl1969 15c66af948 Add Druck-Dateien section to NFC-only mode documentation
Added section for print files and STL resources.
2026-08-25 08:53:55 +02:00
anderl1969 8b746b204a added STLs for FilaMan Lite case (without scale) 2026-08-25 08:49:04 +02:00
18 changed files with 237 additions and 67 deletions

No files matched your search

+15 -11
View File
@@ -111,17 +111,21 @@ Wenn Sie einen Hersteller-NFC-Tag zum ersten Mal scannen:
### Pin-Konfiguration
| Komponente | ESP32 Pin |
|-------------------|-----------|
| HX711 DOUT | 16 |
| HX711 SCK | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
| Komponente | ESP32 Pin | ESP32-S3 Pin |
|-------------------|-----------|--------------|
| HX711 DOUT | 16 | 5 |
| HX711 SCK | 17 | 6 |
| OLED SDA | 21 | 8 |
| OLED SCL | 22 | 9 |
| PN532 IRQ | 32 | 15 |
| PN532 RESET | 33 | 16 |
| PN532 SDA | 21 | 8 |
| PN532 SCL | 22 | 9 |
| TTP223 I/O | 25 | 7 |
Die I2C-Pins sind die Arduino-Standardwerte des jeweiligen Chips und werden im Code nicht explizit gesetzt.
**!! ESP32-S3: GPIO19/GPIO20 nicht für den HX711 verwenden.** Das sind die nativen USB-Datenleitungen (D-/D+), die auf dem DevKitC-1 an der "USB"-Buchse liegen. Der HX711 wird dort nur unzuverlässig erkannt.
**!! Stellen Sie sicher, dass die DIP-Schalter am PN532 auf I2C eingestellt sind.**
**Verwenden Sie den 3V-Pin des ESP für den Touch-Sensor.**
+15 -11
View File
@@ -111,17 +111,21 @@ When you scan a manufacturer NFC tag for the first time:
### Pin Configuration
| Component | ESP32 Pin |
|-------------------|-----------|
| HX711 DOUT | 16 |
| HX711 SCK | 17 |
| OLED SDA | 21 |
| OLED SCL | 22 |
| PN532 IRQ | 32 |
| PN532 RESET | 33 |
| PN532 SDA | 21 |
| PN532 SCL | 22 |
| TTP223 I/O | 25 |
| Component | ESP32 Pin | ESP32-S3 Pin |
|-------------------|-----------|--------------|
| HX711 DOUT | 16 | 5 |
| HX711 SCK | 17 | 6 |
| OLED SDA | 21 | 8 |
| OLED SCL | 22 | 9 |
| PN532 IRQ | 32 | 15 |
| PN532 RESET | 33 | 16 |
| PN532 SDA | 21 | 8 |
| PN532 SCL | 22 | 9 |
| TTP223 I/O | 25 | 7 |
The I2C pins are the Arduino defaults for each chip and are not set explicitly in the code.
**!! ESP32-S3: do not use GPIO19/GPIO20 for the HX711.** These are the native USB data lines (D-/D+) and are wired to the "USB" connector on the DevKitC-1, which makes the HX711 detection unreliable.
**!! Make sure that the DIP switches on the PN532 are set to I2C**
**Use the 3V pin from the ESP for the touch sensor**
Binary file not shown.
Binary file not shown.
Binary file not shown.
+4
View File
@@ -0,0 +1,4 @@
- The **low version** has the same dimensions as the casing of [FilaMan Revamped](https://makerworld.com/de/models/1258715-filaman-revamped-nfc-based-spoolman-scale?designId=1258715-filaman-revamped-nfc-based-spoolman-scale#profileId-1367621).
But because of the missing scale the distance between the PN532 and a NFC tag placed on the marked area might be too narrow, what leads to weak/failed connection.
- The **high version** takes account of this but makes the casing 10mm higher
+57
View File
@@ -87,6 +87,24 @@
</div>
<div id="sleepStatusMessage" style="margin-top: 0.5rem;"></div>
</div>
<div class="fm-card">
<h2>WiFi Settings</h2>
<div class="fm-form-group" style="margin-top: 1rem;">
<label class="fm-label" for="txPowerSelect">WiFi Transmit Power</label>
<select id="txPowerSelect" class="fm-input">
<option value="195">19.5 dBm (default, maximum range)</option>
<option value="170">17 dBm</option>
<option value="150">15 dBm</option>
<option value="130">13 dBm</option>
<option value="110">11 dBm</option>
<option value="85">8.5 dBm (lowest)</option>
</select>
<p style="font-size: 0.8rem; margin-top: 0.5rem;">Only lower this if your router keeps dropping the device, or if it sits right next to the access point. Applies immediately, no restart needed.</p>
</div>
<div id="txPowerStatusMessage" style="margin-top: 0.5rem;"></div>
</div>
</main>
</div>
@@ -160,6 +178,45 @@
});
});
// WiFi transmit power setting
fetch('/api/wifi-power')
.then(response => response.json())
.then(data => {
const sel = document.getElementById('txPowerSelect');
const val = String(data.txPower);
let matched = false;
for (let i = 0; i < sel.options.length; i++) {
if (sel.options[i].value === val) { sel.value = val; matched = true; break; }
}
if (!matched) sel.value = '195';
})
.catch(error => console.error('Error fetching wifi power:', error));
document.getElementById('txPowerSelect').addEventListener('change', function() {
const msg = document.getElementById('txPowerStatusMessage');
fetch('/api/wifi-power', {
method: 'POST',
headers: { 'Content-Type': 'application/json' },
body: JSON.stringify({ txPower: parseInt(this.value) })
})
.then(response => response.json())
.then(data => {
if (data.success) {
msg.textContent = 'Saved.';
msg.style.color = 'var(--success-text)';
setTimeout(() => { msg.textContent = ''; }, 2000);
} else {
msg.textContent = 'Error saving setting.';
msg.style.color = 'var(--error-text)';
}
})
.catch(error => {
msg.textContent = 'Error saving setting.';
msg.style.color = 'var(--error-text)';
console.error('Error saving wifi power:', error);
});
});
document.getElementById('registerBtn').addEventListener('click', () => {
const url = document.getElementById('filamanUrl').value;
const code = document.getElementById('deviceCode').value;
+3
View File
@@ -68,3 +68,6 @@ Der Pull-up-Widerstand ist nicht zwingend erforderlich, erhöht aber die Zuverl
Folge den Anweisungen in der [Hauptdokumentation](../README.de.md#schritt-für-schritt-installation).
Du benötigst Version 3.3.1 oder neuer für eine funktionierende Hardware-Erkennung und den NFC-only Modus.
## Druck-Dateien
[STLs](../_3D%20Print%20Files/FilaMan_Lite/)
+3
View File
@@ -74,3 +74,6 @@ detect a missing hx711. But it should also work w/o the pull-up resistor.
Follow the instructions in the [main readme](../README.md#step-by-step-installation).
You need version 3.3.1 or later for a working hardware recognition and NFC-only mode.
## Print Files
[STLs](../_3D%20Print%20Files/FilaMan_Lite/)
Binary file not shown.
+1 -1
View File
@@ -9,7 +9,7 @@
; https://docs.platformio.org/page/projectconf.html
[common]
version = "3.4.8"
version = "3.4.10"
to_old_version = "3.4.0"
[env:esp32dev]
+11 -2
View File
@@ -17,9 +17,12 @@ const uint8_t PN532_RESET = 33;
// ***** HX711 (Waage)
// HX711 circuit wiring
// ACHTUNG ESP32-S3: GPIO19/20 sind die nativen USB-Leitungen (D-/D+) und liegen auf
// dem DevKitC-1 an der "USB"-Buchse. Der HX711 wird dort unzuverlaessig erkannt.
// Pins hier nur zusammen mit den Tabellen in README.md / README.de.md aendern.
#if CONFIG_IDF_TARGET_ESP32S3
const uint8_t LOADCELL_DOUT_PIN = 19;
const uint8_t LOADCELL_SCK_PIN = 20;
const uint8_t LOADCELL_DOUT_PIN = 5;
const uint8_t LOADCELL_SCK_PIN = 6;
#else
const uint8_t LOADCELL_DOUT_PIN = 16;
const uint8_t LOADCELL_SCK_PIN = 17;
@@ -60,6 +63,12 @@ bool filamanRegistered = false;
uint16_t oledSleepTimeout = 60; // Default 60 seconds (0 = disabled)
// ***** Display Sleep
// ***** WiFi
// Sendeleistung in 0.1 dBm. Default 19.5dBm = Maximum; nur senken, wenn der AP
// das Geraet rauswirft (reason=2/4) oder es direkt neben dem AP steht.
int16_t wifiTxPowerDeciDbm = 195;
// ***** WiFi
// ***** Task Prios
uint8_t rfidTaskCore = 1;
uint8_t rfidTaskPrio = 1;
+4
View File
@@ -15,6 +15,7 @@
#define NVS_NAMESPACE_SETTINGS "settings"
#define NVS_KEY_LANGUAGE "language"
#define NVS_KEY_OLED_SLEEP "oled_sleep"
#define NVS_KEY_WIFI_TXPOWER "wifi_txpwr"
#define SCALE_DEFAULT_CALIBRATION_VALUE 430.0f;
#define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)
@@ -74,4 +75,7 @@ extern uint8_t scaleTaskPrio;
extern uint16_t defaultScaleCalibrationValue;
extern uint16_t oledSleepTimeout;
// WLAN-Sendeleistung in 0.1 dBm (195 = 19.5dBm). Siehe txPowerFromDeciDbm() in wlan.cpp.
extern int16_t wifiTxPowerDeciDbm;
#endif
+37 -37
View File
@@ -234,51 +234,51 @@ void loop() {
weightSend = 0;
}
lastWeight = weight;
lastWeight = weight;
// Wenn ein Tag erkannt wurde und das Gewicht stabil ist (4+ seconds), an FilaMan senden
if (!scanRequestActive && weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Wenn ein Tag erkannt wurde und das Gewicht stabil ist (4+ seconds), an FilaMan senden
if (!scanRequestActive && weightCounterToApi > 3 && weightSend == 0 && nfcReaderState == NFC_READ_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Check if it's a Bambu tag - if so, send only UUID without spoolId
if (isBambuTag) {
sendWeightAsync(0, activeTagUuid, weight);
Serial.println("Bambu weight queued for FilaMan (UUID only)");
} else {
// Normal NTAG: send spoolId + UUID
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
Serial.println("Weight queued for FilaMan");
}
weightSend = 1;
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_SPOOL_TAG), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
}
// Handle successful tag write
if (!scanRequestActive && nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Only send weight if a valid spoolId exists (spool tag, not location tag)
if (activeSpoolId.length() > 0 && activeSpoolId != "0") {
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
// Check if it's a Bambu tag - if so, send only UUID without spoolId
if (isBambuTag) {
sendWeightAsync(0, activeTagUuid, weight);
Serial.println("Bambu weight queued for FilaMan (UUID only)");
} else {
// Normal NTAG: send spoolId + UUID
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
Serial.println("Weight queued for FilaMan");
}
weightSend = 1;
Serial.println("Weight queued for FilaMan after spool tag write");
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_TAG_WRITTEN), tr(STR_SENDING));
oledShowProgressBar(3, 4, tr(STR_SPOOL_TAG), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
} else {
// Location tag written - no weight to send
Serial.println("Location tag written successfully - no weight send needed");
}
// Handle successful tag write
if (!scanRequestActive && nfcReaderState == NFC_WRITE_SUCCESS && tagProcessed == false)
{
tagProcessed = true;
// Only send weight if a valid spoolId exists (spool tag, not location tag)
if (activeSpoolId.length() > 0 && activeSpoolId != "0") {
int sId = activeSpoolId.toInt();
sendWeightAsync(sId, activeTagUuid, weight);
weightSend = 1;
Serial.println("Weight queued for FilaMan after spool tag write");
// Feedback to user
oledShowProgressBar(3, 4, tr(STR_TAG_WRITTEN), tr(STR_SENDING));
oledSetPriority(DISPLAY_PRIORITY_ACTION, 2000);
} else {
// Location tag written - no weight to send
Serial.println("Location tag written successfully - no weight send needed");
}
}
}
}
}
esp_task_wdt_reset();
}
+1 -1
View File
@@ -261,7 +261,7 @@ bool deepSearchScale() {
// without pull-up resistor (10k) on LOADCELL_DOUT_PIN the hx711 lib functions
// are not reliable in detecting a missing chip
// these tests work even without pull-up resistor
const uint32_t timeout = 1000;
const uint32_t timeout = 1000; // 1 second timeout for waiting for the chip to respond
const int samples = 10;
pinMode(LOADCELL_DOUT_PIN, INPUT);
+30
View File
@@ -12,6 +12,7 @@
#include "config.h"
#include "debug.h"
#include "lang.h"
#include "wlan.h"
#ifndef VERSION
#define VERSION "1.2.0"
@@ -295,6 +296,35 @@ void setupWebserver(AsyncWebServer &server) {
request->send(200, "application/json", "{\"success\": true}");
});
// WiFi TX Power API (Wert in 0.1 dBm, z.B. 195 = 19.5dBm)
server.on("/api/wifi-power", HTTP_GET, [](AsyncWebServerRequest *request){
JsonDocument doc;
doc["txPower"] = wifiTxPowerDeciDbm;
String response;
serializeJson(doc, response);
request->send(200, "application/json", response);
});
server.on("/api/wifi-power", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
JsonDocument doc;
DeserializationError error = deserializeJson(doc, (const uint8_t*)data, len);
if (error) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid JSON\"}");
return;
}
if (!doc["txPower"].is<int>()) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Missing txPower\"}");
return;
}
int16_t txPower = (int16_t)doc["txPower"].as<int>();
if (!isValidTxPowerDeciDbm(txPower)) {
request->send(400, "application/json", "{\"success\": false, \"error\": \"Invalid txPower\"}");
return;
}
saveWifiTxPower(txPower);
request->send(200, "application/json", "{\"success\": true}");
});
server.on("/api/v1/rfid/scan-request", HTTP_POST, [](AsyncWebServerRequest *request){}, NULL, [](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){
setScanRequest(true);
request->send(200, "application/json", "{\"success\": true}");
+51 -4
View File
@@ -7,11 +7,53 @@
#include "display.h"
#include "config.h"
#include "lang.h"
#include <Preferences.h>
WiFiManager wm;
bool wm_nonblocking = false;
uint8_t wifiErrorCounter = 0;
// Erlaubte Stufen in 0.1 dBm. Der ESP32-Treiber kennt nur diese festen Werte;
// alles andere fällt auf das Maximum (19.5dBm) zurück.
wifi_power_t txPowerFromDeciDbm(int16_t deciDbm) {
switch (deciDbm) {
case 85: return WIFI_POWER_8_5dBm;
case 110: return WIFI_POWER_11dBm;
case 130: return WIFI_POWER_13dBm;
case 150: return WIFI_POWER_15dBm;
case 170: return WIFI_POWER_17dBm;
case 195: return WIFI_POWER_19_5dBm;
default: return WIFI_POWER_19_5dBm;
}
}
bool isValidTxPowerDeciDbm(int16_t deciDbm) {
return deciDbm == 85 || deciDbm == 110 || deciDbm == 130 ||
deciDbm == 150 || deciDbm == 170 || deciDbm == 195;
}
void loadWifiTxPower() {
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, true);
int16_t stored = preferences.getShort(NVS_KEY_WIFI_TXPOWER, 195);
preferences.end();
wifiTxPowerDeciDbm = isValidTxPowerDeciDbm(stored) ? stored : 195;
Serial.print("WiFi TX power loaded: ");
Serial.print(wifiTxPowerDeciDbm / 10.0, 1);
Serial.println(" dBm");
}
void saveWifiTxPower(int16_t deciDbm) {
if (!isValidTxPowerDeciDbm(deciDbm)) return;
wifiTxPowerDeciDbm = deciDbm;
Preferences preferences;
preferences.begin(NVS_NAMESPACE_SETTINGS, false);
preferences.putShort(NVS_KEY_WIFI_TXPOWER, deciDbm);
preferences.end();
// Sofort anwenden, ein Neustart ist nicht noetig.
WiFi.setTxPower(txPowerFromDeciDbm(deciDbm));
}
void wifiSettings() {
// Standard WiFi-Einstellungen für höchste Stabilität mit ESPAsyncWebServer
WiFi.mode(WIFI_STA);
@@ -29,10 +71,13 @@ void wifiSettings() {
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
// Maximale Sendeleistung. 17dBm war ein Kompromiss gegen Hitzeprobleme,
// führte bei marginalem Empfang aber zu AP-seitigen Auth-/Assoc-Kicks
// (reason=2/4/9/202). Bei Verdacht auf Überhitzung wieder auf 17dBm zurück.
WiFi.setTxPower(WIFI_POWER_19_5dBm);
// Sendeleistung, einstellbar unter Setup (Default 19.5dBm = Maximum).
// 17dBm war früher ein Kompromiss gegen Hitzeprobleme, führte bei marginalem
// Empfang aber zu AP-seitigen Auth-/Assoc-Kicks (reason=2/4/9/202). Umgekehrt
// kann volle Leistung direkt neben dem AP dessen Empfaenger uebersteuern -
// dann hilft ein niedrigerer Wert (beim ESP32-S3 z.B. 8.5dBm).
loadWifiTxPower();
WiFi.setTxPower(txPowerFromDeciDbm(wifiTxPowerDeciDbm));
// Hinweis: Kein esp_wifi_set_rssi_threshold() mehr.
// Der vorherige Wert (-80 dBm) löste in Single-AP-Heimnetzen häufige
@@ -73,6 +118,8 @@ void onWiFiEvent(WiFiEvent_t event, WiFiEventInfo_t info) {
// gelegentlich zurückgesetzt).
WiFi.setSleep(false);
esp_wifi_set_ps(WIFI_PS_NONE);
// Gleiches gilt für die Sendeleistung: nach einem Reconnect erneut setzen.
WiFi.setTxPower(txPowerFromDeciDbm(wifiTxPowerDeciDbm));
oledShowTopRow();
break;
default:
+5
View File
@@ -6,4 +6,9 @@
void initWiFi();
void checkWiFiConnection();
// Sendeleistung in 0.1 dBm (85/110/130/150/170/195). Ungueltige Werte werden ignoriert.
bool isValidTxPowerDeciDbm(int16_t deciDbm);
void loadWifiTxPower();
void saveWifiTxPower(int16_t deciDbm);
#endif