Revised for better guidance

This commit is contained in:
Jackson Yu authored and Queen Vinyl Da.i'gyu-Kazotetsu committed 2025-08-06 00:30:54 -07:00
1 parent 927faff46b
commit 80c825f501
1 file changed
+7 -2
+7 -2
View File
@@ -26,7 +26,7 @@ hf mf dump
```
This process should only take a few seconds with an expected output similar to below, (to keep things short, dumps of key and data were omitted)
```
[=] -----------------------------------Add commentMore actions
[=] -----------------------------------
[=] UID 4b... XX XX XX XX
[=] -----------------------------------
@@ -48,6 +48,11 @@ This process should only take a few seconds with an expected output similar to b
[+] Saved 1024 bytes to binary file `C:\Users\exiom\Desktop\ProxSpace\pm3/hf-mf-XXXXXXXX-dump.bin`
[+] Saved to json file C:\Users\exiom\Desktop\ProxSpace\pm3/hf-mf-XXXXXXXX-dump.json
```
Once the above command is completed you will see that the data dump and keys will have been saved to the working folder of PM3.
You can find out what each block of data means here, [Bambu Lab Filament Tag Documentation](./docs/BambuLabRfid.md)
Below continues with more technical explainations and legacy methods. If that doesn't interests you, your instructions are complete here.
### Deriving the keys
@@ -103,4 +108,4 @@ To visualize the data on the tag, run the following:
Before the above methods were developed, tag data had to be obtained by sniffing the data between the RFID tag and the AMS using a Proxmark3-compatible device.
To read how to obtain the tag data using the legacy sniffing method, see the [TagSniffing.md](./docs/TagSniffing.md).
To read how to obtain the tag data using the legacy sniffing method, see the [TagSniffing.md](./docs/TagSniffing.md).