From 80c825f501b94fa25d7f6603be74281e1adad543 Mon Sep 17 00:00:00 2001 From: Jackson Yu Date: Fri, 20 Jun 2025 12:08:50 +0800 Subject: [PATCH] Revised for better guidance --- docs/ReadTags.md | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/docs/ReadTags.md b/docs/ReadTags.md index 6348129..7f603d7 100644 --- a/docs/ReadTags.md +++ b/docs/ReadTags.md @@ -26,7 +26,7 @@ hf mf dump ``` This process should only take a few seconds with an expected output similar to below, (to keep things short, dumps of key and data were omitted) ``` -[=] -----------------------------------Add commentMore actions +[=] ----------------------------------- [=] UID 4b... XX XX XX XX [=] ----------------------------------- @@ -48,6 +48,11 @@ This process should only take a few seconds with an expected output similar to b [+] Saved 1024 bytes to binary file `C:\Users\exiom\Desktop\ProxSpace\pm3/hf-mf-XXXXXXXX-dump.bin` [+] Saved to json file C:\Users\exiom\Desktop\ProxSpace\pm3/hf-mf-XXXXXXXX-dump.json ``` +Once the above command is completed you will see that the data dump and keys will have been saved to the working folder of PM3. + +You can find out what each block of data means here, [Bambu Lab Filament Tag Documentation](./docs/BambuLabRfid.md) + +Below continues with more technical explainations and legacy methods. If that doesn't interests you, your instructions are complete here. ### Deriving the keys @@ -103,4 +108,4 @@ To visualize the data on the tag, run the following: Before the above methods were developed, tag data had to be obtained by sniffing the data between the RFID tag and the AMS using a Proxmark3-compatible device. -To read how to obtain the tag data using the legacy sniffing method, see the [TagSniffing.md](./docs/TagSniffing.md). \ No newline at end of file +To read how to obtain the tag data using the legacy sniffing method, see the [TagSniffing.md](./docs/TagSniffing.md).