89 lines
3.1 KiB
Verilog
89 lines
3.1 KiB
Verilog
//-----------------------------------------------------------------------------
|
|
// Copyright (C) Proxmark3 contributors. See AUTHORS.md for details.
|
|
//
|
|
// This program is free software: you can redistribute it and/or modify
|
|
// it under the terms of the GNU General Public License as published by
|
|
// the Free Software Foundation, either version 3 of the License, or
|
|
// (at your option) any later version.
|
|
//
|
|
// This program is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
// GNU General Public License for more details.
|
|
//
|
|
// See LICENSE.txt for the text of the license.
|
|
//-----------------------------------------------------------------------------
|
|
//
|
|
// track min and max peak values (envelope follower)
|
|
//
|
|
// NB: the min value (resp. max value) is updated only when the next high peak
|
|
// (resp. low peak) is reached/detected, since you can't know it isn't a
|
|
// local minima (resp. maxima) until then.
|
|
// This also means the peaks are detected with an unpredictable delay.
|
|
// This algorithm therefore can't be used directly for realtime peak detections,
|
|
// but it can be used as a simple envelope follower.
|
|
|
|
module min_max_tracker(
|
|
input clk,
|
|
input [7:0] adc_d,
|
|
input [7:0] threshold,
|
|
input freeze,
|
|
output [7:0] min,
|
|
output [7:0] max
|
|
);
|
|
|
|
reg [7:0] min_val = 255;
|
|
reg [7:0] max_val = 0;
|
|
reg [7:0] cur_min_val = 255;
|
|
reg [7:0] cur_max_val = 0;
|
|
reg [1:0] state = 0;
|
|
|
|
// `freeze` holds every register still. A tag simulator's own load modulation
|
|
// is far deeper than the reader's, so letting it into this follower drags min and
|
|
// max to the extremes and the slicing levels derived from them no longer bracket
|
|
// the reader's much shallower signal - measured on a Proxmark simulating Hitag 2,
|
|
// that left the receiver deaf for ~1200 T0 after every answer. Holding the
|
|
// follower across our own transmission keeps it converged on the reader.
|
|
always @(posedge clk)
|
|
if (!freeze)
|
|
begin
|
|
case (state)
|
|
0: // initialize
|
|
begin
|
|
if (cur_max_val >= ({1'b0, adc_d} + threshold))
|
|
state <= 2;
|
|
else if (adc_d >= ({1'b0, cur_min_val} + threshold))
|
|
state <= 1;
|
|
if (cur_max_val <= adc_d)
|
|
cur_max_val <= adc_d;
|
|
else if (adc_d <= cur_min_val)
|
|
cur_min_val <= adc_d;
|
|
end
|
|
1: // high phase
|
|
begin
|
|
if (cur_max_val <= adc_d)
|
|
cur_max_val <= adc_d;
|
|
else if (({1'b0, adc_d} + threshold) <= cur_max_val) begin
|
|
state <= 2;
|
|
cur_min_val <= adc_d;
|
|
max_val <= cur_max_val;
|
|
end
|
|
end
|
|
2: // low phase
|
|
begin
|
|
if (adc_d <= cur_min_val)
|
|
cur_min_val <= adc_d;
|
|
else if (adc_d >= ({1'b0, cur_min_val} + threshold)) begin
|
|
state <= 1;
|
|
cur_max_val <= adc_d;
|
|
min_val <= cur_min_val;
|
|
end
|
|
end
|
|
endcase
|
|
end
|
|
|
|
assign min = min_val;
|
|
assign max = max_val;
|
|
|
|
endmodule
|