90 lines
3.0 KiB
Markdown
90 lines
3.0 KiB
Markdown
# LF_EM4100RSWW — EM4100 Read/Simulate/Write/Wipe/Validate
|
|
|
|
> **Author:** Łukasz "zabszk" Jurczyk
|
|
> **Frequency:** LF (125 kHz)
|
|
> **Hardware:** RDV4 (requires flash memory)
|
|
|
|
[Back to Standalone Modes Index](../../armsrc/Standalone/readme.md#individual-mode-documentation) | [Source Code](../../armsrc/Standalone/lf_em4100rsww.c) | [Development Guide](../../armsrc/Standalone/readme.md#developing-standalone-modes)
|
|
|
|
---
|
|
|
|
## What
|
|
|
|
An EM4100 multi-tool that adds **wipe** and **validate** operations on top of read/simulate/write. Automatically saves read IDs to flash memory for persistence across power cycles.
|
|
|
|
## Why
|
|
|
|
Unlike RSWB which focuses on brute forcing, RSWW focuses on the **clone verification workflow**: read a tag, write it to a T55x7, then validate the clone reads back correctly. The wipe function lets you reset T55x7 cards to a blank state. This is the mode to use when:
|
|
|
|
- **Quality-checking clones**: Verify the written data matches the original
|
|
- **Preparing blank cards**: Wipe T55x7 cards back to factory state
|
|
- **Field work with persistence**: Read IDs survive reboots via flash
|
|
|
|
## How
|
|
|
|
1. **READ**: Listens for EM4100 tags and stores the ID to flash
|
|
2. **EMULATE**: Broadcasts the stored ID (defaults to this mode if flash has data from a previous session)
|
|
3. **WRITE**: Writes the stored ID to a T55x7 tag
|
|
4. **VALIDATE**: Reads back a T55x7 and compares it to the stored ID to confirm a successful clone
|
|
5. **WIPE**: Resets a T55x7 tag to its default (empty) configuration
|
|
|
|
## LED Indicators
|
|
|
|
| LED | Meaning |
|
|
|-----|---------|
|
|
| **A** (solid) | READ mode active |
|
|
| **B** (solid) | EMULATE mode active |
|
|
| **C** (solid) | VALIDATE mode active |
|
|
| **D** (solid) | WIPE mode active |
|
|
| Blink pattern | Success/failure indication after operations |
|
|
|
|
## Button Controls
|
|
|
|
| Action | Effect |
|
|
|--------|--------|
|
|
| **Single click** | Advance mode (READ → EMULATE → WRITE/VALIDATE) |
|
|
| **Hold** | Toggle between READ and EMULATE |
|
|
| **Double-click in READ** | Enter WIPE mode |
|
|
| **USB command** | Exit standalone mode |
|
|
|
|
## State Machine
|
|
|
|
```mermaid
|
|
stateDiagram-v2
|
|
[*] --> READ : Startup (no flash data)
|
|
[*] --> EMULATE : Startup (flash has saved ID)
|
|
|
|
READ --> EMULATE : Single click\n(ID captured)
|
|
EMULATE --> READ : Hold (toggle)
|
|
|
|
EMULATE --> WRITE : Single click
|
|
WRITE --> VALIDATE : Auto after write
|
|
VALIDATE --> EMULATE : Validation complete
|
|
|
|
READ --> WIPE : Double-click
|
|
WIPE --> READ : Wipe complete
|
|
|
|
READ --> [*] : USB data received
|
|
EMULATE --> [*] : USB data received
|
|
```
|
|
|
|
## Flash Storage
|
|
|
|
- Automatically saves the most recent read ID to SPI flash
|
|
- Loads stored ID on startup; if found, starts in EMULATE mode
|
|
- One slot for persistent storage
|
|
|
|
## Compilation
|
|
|
|
```
|
|
make clean
|
|
make STANDALONE=LF_EM4100RSWW -j
|
|
./pm3-flash-fullimage
|
|
```
|
|
|
|
## Related
|
|
|
|
- [EM4100 RSWB](lf_em4100rswb.md) — 4-slot variant with brute force
|
|
- [EM4100 Emulator](lf_em4100emul.md) — Simple hardcoded EM4100 simulator
|
|
- [EM4100 RWC](lf_em4100rwc.md) — 16-slot read/sim/clone
|