91 lines
3.4 KiB
Markdown
91 lines
3.4 KiB
Markdown
# LF_EM4100RSWB — EM4100 Read/Simulate/Write/Brute
|
|
|
|
> **Author:** Monster1024
|
|
> **Frequency:** LF (125 kHz)
|
|
> **Hardware:** RDV4 (requires flash memory for slot storage)
|
|
|
|
[Back to Standalone Modes Index](../../armsrc/Standalone/readme.md#individual-mode-documentation) | [Source Code](../../armsrc/Standalone/lf_em4100rswb.c) | [Development Guide](../../armsrc/Standalone/readme.md#developing-standalone-modes)
|
|
|
|
---
|
|
|
|
## What
|
|
|
|
A full-featured EM4100 attack mode with four operations: **read**, **simulate**, **write to T55x7**, and **brute force**. Supports 4 card storage slots with flash persistence on RDV4 hardware.
|
|
|
|
## Why
|
|
|
|
This is the most versatile EM4100 standalone mode. While simpler modes only read or simulate, RSWB combines all four essential operations — plus brute forcing — into a single firmware image. This is ideal for:
|
|
|
|
- **Pentesting EM4100 access control**: Read a badge, simulate it, then write a clone, all standalone
|
|
- **Brute force attacks**: Iterate through card numbers to find valid ones when you don't have a known-good badge
|
|
- **Multi-target assessments**: Store up to 4 different badges and switch between them on-site
|
|
|
|
## How
|
|
|
|
1. **READ mode**: Listens for EM4100 cards. On successful read, stores the ID in the current slot and automatically transitions to SIM mode
|
|
2. **SIM mode**: Broadcasts the stored EM4100 ID. Button press moves to WRITE mode
|
|
3. **WRITE mode**: Writes the stored ID to a T55x7 blank card placed on the antenna
|
|
4. **BRUTE mode**: Sequentially transmits incrementing card numbers. Double-click saves a working number; hold changes brute speed
|
|
|
|
Slot data persists across reboots via the RDV4's SPI flash memory.
|
|
|
|
## LED Indicators
|
|
|
|
| LED | Meaning |
|
|
|-----|---------|
|
|
| **A, B** (binary) | Current mode: 00=READ, 01=SIM, 10=WRITE, 11=BRUTE |
|
|
| **C, D** (binary) | Current slot: 00=Slot1, 01=Slot2, 10=Slot3, 11=Slot4 |
|
|
| All flash on operation | Success confirmation |
|
|
|
|
## Button Controls
|
|
|
|
| Context | Action | Effect |
|
|
|---------|--------|--------|
|
|
| Any mode | **Single click** | Switch mode (READ → SIM → WRITE → BRUTE → READ) |
|
|
| Any mode | **Hold** | Switch slot (1 → 2 → 3 → 4 → 1) |
|
|
| BRUTE | **Single click** | Exit brute mode → READ |
|
|
| BRUTE | **Double-click** | Save current brute position |
|
|
| BRUTE | **Hold** | Change brute speed |
|
|
|
|
## State Machine
|
|
|
|
```mermaid
|
|
stateDiagram-v2
|
|
[*] --> READ : Startup (load slots from flash)
|
|
|
|
READ --> SIM : Card read successfully\n(auto-transition)
|
|
READ --> SIM : Single click
|
|
SIM --> WRITE : Single click
|
|
WRITE --> BRUTE : Single click
|
|
BRUTE --> READ : Single click\nor brute complete
|
|
|
|
READ --> READ : Hold (switch slot)
|
|
SIM --> SIM : Hold (switch slot)
|
|
WRITE --> WRITE : Hold (switch slot)
|
|
BRUTE --> BRUTE : Hold (change speed)\nDouble-click (save position)
|
|
|
|
READ --> [*] : USB data received
|
|
SIM --> [*] : USB data received
|
|
```
|
|
|
|
## Flash Storage
|
|
|
|
- Slot data is saved to and loaded from the RDV4 SPI flash
|
|
- 4 slots, each storing the raw EM4100 ID
|
|
- Data persists across power cycles
|
|
|
|
## Compilation
|
|
|
|
```
|
|
make clean
|
|
make STANDALONE=LF_EM4100RSWB -j
|
|
./pm3-flash-fullimage
|
|
```
|
|
|
|
## Related
|
|
|
|
- [EM4100 Emulator](lf_em4100emul.md) — Simple predefined EM4100 simulator
|
|
- [EM4100 RSWW](lf_em4100rsww.md) — Read/sim/write/wipe/validate variant
|
|
- [EM4100 RWC](lf_em4100rwc.md) — 16-slot read/sim/clone
|
|
- [T5577 Introduction Guide](../T5577_Guide.md) — Background on T5577/EM4100
|