Commit Graph
22368 Commits
Author SHA1 Message Date
Iceman 45ac9fdfad Merge branch 'master' into doc-pm5-fpga-config-poweron
Signed-off-by: Iceman <iceman@iuse.se>
2026-08-20 21:47:12 +07:00
Iceman a746369cbe Merge pull request #3470 from corollary-de/mfdes-chk-keylogic
Fixes to key loading logic for mfdes chk
2026-08-20 21:46:04 +07:00
Iceman 4f410992d4 Merge branch 'master' into mfdes-chk-keylogic
Signed-off-by: Iceman <iceman@iuse.se>
2026-08-20 21:45:52 +07:00
Iceman 6151b26367 Merge pull request #3453 from trichimtrich/fix/iclass-unhash-preimage-enumeration
fix hf iclass unhash missing pre-images
2026-08-20 21:44:53 +07:00
Iceman f4b76715c1 Merge branch 'master' into fix/iclass-unhash-preimage-enumeration
Signed-off-by: Iceman <iceman@iuse.se>
2026-08-20 21:44:40 +07:00
Philippe Teuwen c9581bde4d rdv4_init_extflash: use same values as init_rdv4.lua 2026-08-20 15:45:57 +02:00
Nemanja Nedeljkovic f71bc53d0c fix(pm5): power on the FPGA in hw fpga config
`hw fpga config` drives the FPGA over JTAG, but on PM5 the FPGA has to be
clocked/powered first - previously that only happened as a side effect of a
reader command (e.g. `hf 14a read`), so `hw fpga config` failed if run on its
own. Bring the FPGA up in the HAL at the start of FpgaStartConfig()
(FpgaSetup24MHzClk) so the command works standalone; no doc workaround needed.
2026-08-20 15:36:17 +02:00
Philippe Teuwen 08f8dc8692 CARDHOPPER: document how to set CARDHOPPER_USB 2026-08-20 14:28:21 +02:00
Philippe Teuwen b11b85e51a CARDHOPPER: missing header 2026-08-20 14:28:21 +02:00
Chloé Franke 43e1f4db09 Merge branch 'master' into mfdes-chk-keylogic
Signed-off-by: Chloé Franke <git@corollary.de>
2026-08-20 12:21:38 +00:00
nffq 0b9d97be2b fix: FM11RF08S key recovery generates incorrect results when nt == 0 2026-08-20 13:37:34 +02:00
Nemanja Nedeljkovic 6507b8f36b feat(pm5): hf tune --rgb / lf tune --rgb - antenna RGB as a tuning meter
Adds an opt-in `--rgb` flag to the continuous `hf tune` / `lf tune` commands that
mirrors the antenna tuning level on the PM5 antenna RGB LED: blue = low, green =
mid, red = high, tracking the on-screen bar so you can find coupling (e.g. an
implant) by feel without watching the screen.

The colour is computed client-side from the same per-iteration voltage / running
peak the bar uses (so it matches the bar and auto-scales), and pushed to the
device via a new dumb CMD_PM5_RGB_SET {r,g,b}. That command is handled (#ifdef
PM5) by a dedicated AT32 RGB HAL module, common_arm/rgb/{rgb_apis.h,
rgb_hw_at32.c} (RgbLedSet(), I2C controller @ 0x48), wired into the armsrc
Makefile/CMake as SRC_RGB for PM5 only - so no other platform is affected and no
hardware code lands in shared files.
2026-08-20 11:55:55 +02:00
Iceman ad4a94b1a5 Merge pull request #3480 from s00se/spinlock-api-gate
Add API check to Android spinlock shim
2026-08-20 16:24:33 +07:00
Nemanja Nedeljkovic ba315d8d58 fix(pm5): suppress bogus [FPGA] version section on PM5
PM5's FPGA (Gowin GW1NR) bitstream is loaded at runtime via `hw fpga config`
and is not compiled into the firmware; only the Xilinx fpga_pm3_hf.bit is pulled
in (to generate g_fpga_version_information[]) which PM5 never runs. So the
`[ FPGA ] fpga_pm3_hf.ncd image 2s30vq100` line described a bitstream unrelated
to the actual device.

- Firmware (appmain.c): omit the [FPGA] section from the version string on PM5
  (#ifndef PM5), since there's no meaningful built-in FPGA version to report.
- Client (cmdhw.c): skip the FPGA_TYPE "chip mismatch" check for PM5, which would
  otherwise trigger now that the section is gone.
2026-08-20 10:36:09 +02:00
Nemanja Nedeljkovic 36027b48e6 fix(pm5): report PM5 in hw status [Model] firmware line
The [Model] section only distinguished RDV4 firmware from a "PM3 GENERIC"
else branch, so PM5 (AT32) fell through and printed "Firmware... PM3 GENERIC"
even though the banner/Target/MCU already report PM5/AT32F437. Add an IfPm5()
branch that prints "Firmware... PM5" and the external-flash status.

Note: the "[ FPGA ] ... 2s30vq100" line in hw version is separate and comes
from the firmware-generated version string (fpga_version_info.c). On PM5 the
build reuses the Xilinx fpga_pm3_hf.bit only to generate that version info
(see Makefile.hal PM5 TODO), while the real Gowin FPGA is loaded via JTAG, so
the reported bitstream name is a placeholder. Fixing that is a firmware/build
change, not addressed here.
2026-08-20 10:36:09 +02:00
Philippe Teuwen 72d72ddc9d update extflash init scripts 2026-08-20 10:11:42 +02:00
s00se 0482fa8757 Add API check to Android spinlock shim
Android spinlock shim not needed on modern (API 24+) Android, this fixes compiling on Termux

Signed-off-by: s00se <95649696+s00se@users.noreply.github.com>
2026-08-19 20:04:03 -06:00
Philippe Teuwen cb5b3b65c8 pm5 doc: cmake for ARM 2026-08-19 22:56:46 +02:00
Philippe Teuwen 4da4eb706a Fix bug in bootrom.bin target 2026-08-19 22:18:48 +02:00
Philippe Teuwen fbfe53d0bb update pm5 doc 2026-08-19 22:02:28 +02:00
Nemanja Nedeljkovic 6da7c77427 feat(pm5): report AT32 MCU, flash size and PM5 target in hw version/status
`hw version` and `hw status` decoded the reported chip id as an Atmel AT91
CIDR. On PM5 (AT32) the id is an ARM DBGMCU IDCODE, so it showed
"MCU Unknown", a bogus flash size (32 KB / 973% used) and "PM3 GENERIC".

- Client: when IfPm5(), print MCU "AT32F437" and the real flash size, and add
  a "PM5" target line, instead of running the AT91 decode.
- Firmware: the flash size can't be derived from the AT32 IDCODE, so the device
  now sends GetChipFlashSize(). It is appended AFTER the version string in the
  CMD_VERSION reply, so the wire layout is unchanged and it stays compatible in
  both directions (old client ignores the trailing bytes; new client length-
  guards and treats a missing value as 0). GetChipFlashSize() already exists for
  both AT91 and AT32.
2026-08-19 21:49:43 +02:00
Philippe Teuwen 06bc3239ab Proxmark5 instructions, WIP 2026-08-19 21:40:15 +02:00
Philippe Teuwen caa76f57b3 Fix pm5 recovery image 2026-08-19 19:28:17 +02:00
dxl 86dfdfff89 Fixed a bug in reading hitagU and hitagS on RDV4. 2026-08-19 18:53:35 +02:00
iceman1001 75c2803d30 Corrected the file extension 2026-08-19 18:48:12 +02:00
Philippe Teuwen 4e684cb4d3 PM5: Detect incompatible PLATFORM_EXTRAS 2026-08-19 17:52:15 +02:00
Chloé Franke 23ed174e76 added to changelog 2026-08-19 16:29:04 +02:00
Chloé Franke 7587a05cf1 Inverted verbose flag to work correctly 2026-08-19 16:28:10 +02:00
Philippe Teuwen 827fce4839 Use ARRAYLEN when possible 2026-08-19 15:51:54 +02:00
Philippe Teuwen 5518e6af77 Fix Flash_UniqueID 2026-08-19 15:51:54 +02:00
Philippe Teuwen 6863314019 Remove tabs 2026-08-19 15:51:54 +02:00
Philippe Teuwen 52af3f11e2 rename a couple of commands 2026-08-19 15:51:54 +02:00
Philippe Teuwen b6752e9dde compile CMD_FPGA_CMD_SET_PWR_PWM_LOW_COUNT only for pm5 2026-08-19 15:51:54 +02:00
Philippe Teuwen f82ac61e78 Prompt the user when flash_suggest_update_bootloader()
pm3line_init() delayed to not install signal handlers on other usages than interactive client
2026-08-19 15:51:54 +02:00
dxl 2dfe6c85a4 Record all remarks related to Proxmark5 to Proxmark5.md 2026-08-19 15:51:54 +02:00
dxl d064f9a310 Change HITAG_T_WAIT_FIRST to 350(See datasheet) so that PM5 can read hitagu normally. 2026-08-19 15:51:54 +02:00
dxl a286002d27 Refactor ISO14443A DMA RX to use cross-platform buffer helpers
Replace the hard-coded AT91 PDC register access in SniffIso14443a() with
cross-platform helpers for the RX double-buffer status/refresh, so the
sniffer no longer depends on AT91-specific registers.

- Add FPGA_SSC_DMA_RX_{Primary,Secondary}_Done and
  FPGA_SSC_DMA_RX_Refresh_{Both,Secondary} to fpga_apis.h.
- AT91: primary maps to PDC RPR/RCR, secondary ("next") to RNPR/RNCR.
- AT32: no double buffer, so the primary path is a no-op and all re-arming
  is done through the secondary (single-shot DMA re-arm).
2026-08-19 15:51:53 +02:00
dxl 676bc467cd Deleted unused variable 'maxDataLen' from SniffIso14443a() 2026-08-19 15:51:53 +02:00
dxl 7ef2d7b5b7 Moved startup_at32f435_437.s from armlib to armsrc 2026-08-19 15:51:53 +02:00
Philippe Teuwen 86b9e4d108 Merge: hardware abstraction layer for ARM 2026-08-19 15:51:53 +02:00
dxl d286946d0f Update the Makefile support for ARM 2026-08-19 15:51:53 +02:00
DXL 0191fb78ec CMake has been implemented to manage ARM projects.
Add the mkversion bat and ps1 implementation to the Windows platform compilation.
Make armlib a static library so that bootrom and armsrc can be reused.
2026-08-19 15:51:50 +02:00
DXL 355d58b1cb armlib includes 2026-08-19 15:51:18 +02:00
dxl 1cdd70d8e7 Export I2C_BufferReadRaw() of i2c.c 2026-08-19 15:51:18 +02:00
dxl 566ada5f33 The source files for the unit tests of Proxmark5 have been added. 2026-08-19 15:51:18 +02:00
dxl 3cc2f7e59b Make ldscript cross-platform. 2026-08-19 15:51:18 +02:00
dxl d59e96e09e Make proxmark3_arm.h more cross-platform. 2026-08-19 15:51:18 +02:00
dxl cbc56f720d Abstract the flash.c to avoid hard coding that makes it impossible to cross platforms. 2026-08-19 15:51:18 +02:00
DXL b448d3c6bd The bootrom performs hardware abstraction. 2026-08-19 15:48:58 +02:00
Chloé Franke b045bb6f4a Fixed wrong type for format string 2026-08-19 15:39:53 +02:00