Allow skipping setcap, to ease dockerized release tests

This commit is contained in:
Philippe Teuwen committed 2026-09-17 16:59:19 +02:00
1 parent 90c41c6de5
commit afb55e196a
3 files changed
+12 -6

No files matched your search

+7 -5
View File
@@ -1070,11 +1070,13 @@ endif
install: all
$(info [@] Installing client to $(DESTDIR)$(PREFIX)...)
ifneq (,$(INSTALLBIN))
$(Q)$(INSTALLSUDO) $(MKDIR) $(DESTDIR)$(PREFIX)$(PATHSEP)$(INSTALLBINRELPATH)
$(Q)$(INSTALLSUDO) $(CP) $(INSTALLBIN) $(DESTDIR)$(PREFIX)$(PATHSEP)$(INSTALLBINRELPATH)
ifeq ($(platform),Linux)
$(Q)$(INSTALLSUDO) setcap 'cap_net_raw,cap_net_admin+eip' $(DESTDIR)$(PREFIX)$(PATHSEP)$(INSTALLBINRELPATH)$(PATHSEP)$(INSTALLBIN) || echo "[!] setcap failed - BLE connect-by-name (-p ble:<name>) will need sudo; connect-by-MAC is unaffected"
endif
$(Q)$(INSTALLSUDO) $(MKDIR) $(DESTDIR)$(PREFIX)$(PATHSEP)$(INSTALLBINRELPATH)
$(Q)$(INSTALLSUDO) $(CP) $(INSTALLBIN) $(DESTDIR)$(PREFIX)$(PATHSEP)$(INSTALLBINRELPATH)
ifeq ($(platform),Linux)
ifneq ($(SKIP_SETCAP), 1)
$(Q)$(INSTALLSUDO) setcap 'cap_net_raw,cap_net_admin+eip' $(DESTDIR)$(PREFIX)$(PATHSEP)$(INSTALLBINRELPATH)$(PATHSEP)$(INSTALLBIN) || echo "[!] setcap failed - BLE connect-by-name (-p ble:<name>) will need sudo; connect-by-MAC is unaffected"
endif
endif
endif
ifneq (,$(INSTALLSHARE))
$(Q)$(INSTALLSUDO) $(MKDIR) $(DESTDIR)$(PREFIX)$(PATHSEP)$(INSTALLSHARERELPATH)
+4
View File
@@ -126,3 +126,7 @@ Host binaries are compiled with hardening flags (only with Makefile, not with cm
* udev rule on Linux
Same logic for `make all`, `make clean`, `make uninstall` and `make check`.
The client is installed with the additional capabilities required for direct BLE connections. See `client/Makefile` for details.
Depending on your distribution, you may need to ensure that binaries with such capabilities can be run by regular users, else an *operation not permitted* will occur.
If you prefer to not set these capabilities, run `make install SKIP_SETCAP=1`.
+1 -1
View File
@@ -11,7 +11,7 @@ set -x
make clean && make -j PLATFORM=PM3GENERIC PLATFORM_EXTRAS= STANDALONE=LF_SAMYRUN && tools/pm3_tests.sh --long || exit 1
make clean && make -j PLATFORM=PM3RDV4 PLATFORM_EXTRAS= STANDALONE=HF_ST25_TEAROFF || exit 1
make clean && make -j PLATFORM=PM3RDV4 PLATFORM_EXTRAS=BTADDON STANDALONE=HF_REBLAY || exit 1
make -j PLATFORM=PM3RDV4 PLATFORM_EXTRAS=BTADDON STANDALONE=HF_REBLAY && if sudo true; then INSTALLSUDO=sudo make install PLATFORM=PM3RDV4 PLATFORM_EXTRAS=BTADDON STANDALONE=HF_REBLAY && ( cd /tmp; proxmark3 -c 'data load -f lf_EM4x05.pm3;lf search -1'|grep 'Valid FDX-B ID found' ) && INSTALLSUDO=sudo make uninstall || exit 1; fi
make -j PLATFORM=PM3RDV4 PLATFORM_EXTRAS=BTADDON STANDALONE=HF_REBLAY && if sudo true; then INSTALLSUDO=sudo make install SKIP_SETCAP=1 PLATFORM=PM3RDV4 PLATFORM_EXTRAS=BTADDON STANDALONE=HF_REBLAY && ( cd /tmp; proxmark3 -c 'data load -f lf_EM4x05.pm3;lf search -1'|grep 'Valid FDX-B ID found' ) && INSTALLSUDO=sudo make uninstall || exit 1; fi
( cd client; rm -rf build; mkdir build;cd build;cmake .. && make -j PLATFORM=PM3GENERIC PLATFORM_EXTRAS= STANDALONE=LF_SAMYRUN && cp -a ../*scripts ../*libs . && ../../tools/pm3_tests.sh --clientbin $(pwd)/proxmark3 client ) || exit 1
( cd client; rm -rf build; mkdir build;cd build;cmake .. && make -j PLATFORM=PM3RDV4 PLATFORM_EXTRAS= STANDALONE=HF_ST25_TEAROFF ) || exit 1
( cd client; rm -rf build; mkdir build;cd build;cmake .. && make -j PLATFORM=PM3RDV4 PLATFORM_EXTRAS=BTADDON STANDALONE=HF_REBLAY ) || exit 1