Add files via upload

Signed-off-by: Niel Nielsen <nieldk@gmail.com>
This commit is contained in:
Niel Nielsen authored and GitHub committed 2026-09-03 06:36:07 +02:00
1 parent 1d80a4164a
commit 50b0259978
1 file changed
+91 -3
+91 -3
View File
@@ -1930,9 +1930,9 @@ static int CmdPing(const char *Cmd) {
uint32_t len = arg_get_u32_def(ctx, 1, 32);
CLIParserFree(ctx);
if (len > PM3_CMD_DATA_SIZE)
len = PM3_CMD_DATA_SIZE;
if (len > pm3_max_cmd_data_size())
len = pm3_max_cmd_data_size();
if (len) {
PrintAndLogEx(INFO, "Ping sent with payload len... " _YELLOW_("%d"), len);
} else {
@@ -2294,6 +2294,93 @@ static int CmdPM5QCTest(const char *Cmd) {
return PM3_SUCCESS;
}
static int CmdBWMUpgrade(const char *Cmd) {
CLIParserContext *ctx;
CLIParserInit(&ctx, "hw bwmupgrade",
"Reflash the BWM (ESP32) firmware over the BWM link - no header, no soldering.\n"
"Requires a BWM that still responds; this updates a wrong-version ESP, it cannot\n"
"recover a fully bricked one (that still needs the 5-pin header + esptool).",
"hw bwmupgrade -f bwm_esp32.bin");
void *argtable[] = {
arg_param_begin,
arg_str1("f", "file", "<fn>", "ESP32 firmware image (.bin)"),
arg_param_end,
};
CLIExecWithReturn(ctx, Cmd, argtable, false);
int fnlen = 0;
char fn[FILE_PATH_SIZE] = {0};
CLIParamStrToBuf(arg_get_str(ctx, 1), (uint8_t *)fn, sizeof(fn), &fnlen);
CLIParserFree(ctx);
if (fnlen == 0) {
PrintAndLogEx(FAILED, "no filename given");
return PM3_EINVARG;
}
uint8_t *fw = NULL;
size_t fwlen = 0;
if ((loadFile_safe(fn, "", (void **)&fw, &fwlen) != PM3_SUCCESS) || (fwlen == 0)) {
PrintAndLogEx(FAILED, "could not read " _YELLOW_("%s"), fn);
return PM3_EFILE;
}
PacketResponseNG resp;
// BEGIN: tell the BWM how many bytes are coming (it erases the target partition)
uint8_t beg[5] = { BWM_OTA_ACTION_BEGIN,
(uint8_t)(fwlen & 0xFF), (uint8_t)((fwlen >> 8) & 0xFF),
(uint8_t)((fwlen >> 16) & 0xFF), (uint8_t)((fwlen >> 24) & 0xFF) };
clearCommandBuffer();
SendCommandNG(CMD_PM5_BWM_ESP_OTA, beg, sizeof(beg));
if ((WaitForResponseTimeout(CMD_PM5_BWM_ESP_OTA, &resp, 20000) == false) || (resp.status != PM3_SUCCESS)) {
PrintAndLogEx(FAILED, "OTA begin failed (is a responsive BWM fitted?)");
free(fw);
return PM3_EFAILED;
}
PrintAndLogEx(INFO, "Uploading " _YELLOW_("%zu") " bytes of ESP firmware over the BWM link...", fwlen);
// WRITE chunks (one action byte + as much firmware as fits the negotiated frame)
size_t maxchunk = (size_t)pm3_max_cmd_data_size() - 1;
uint8_t *buf = calloc(1, maxchunk + 1);
if (buf == NULL) {
free(fw);
return PM3_EMALLOC;
}
size_t sent = 0;
while (sent < fwlen) {
size_t n = MIN(maxchunk, fwlen - sent);
buf[0] = BWM_OTA_ACTION_WRITE;
memcpy(buf + 1, fw + sent, n);
clearCommandBuffer();
SendCommandNG(CMD_PM5_BWM_ESP_OTA, buf, (uint16_t)(n + 1));
if ((WaitForResponseTimeout(CMD_PM5_BWM_ESP_OTA, &resp, 12000) == false) || (resp.status != PM3_SUCCESS)) {
PrintAndLogEx(NORMAL, "");
PrintAndLogEx(FAILED, "OTA write failed at offset %zu", sent);
free(buf);
free(fw);
return PM3_EFAILED;
}
sent += n;
PrintAndLogEx(INPLACE, " %zu / %zu bytes (%zu%%)", sent, fwlen, (sent * 100) / fwlen);
}
free(buf);
PrintAndLogEx(NORMAL, "");
// END: finalize + set the new boot partition; the BWM reboots into it
uint8_t end[1] = { BWM_OTA_ACTION_END };
clearCommandBuffer();
SendCommandNG(CMD_PM5_BWM_ESP_OTA, end, sizeof(end));
if ((WaitForResponseTimeout(CMD_PM5_BWM_ESP_OTA, &resp, 30000) == false) || (resp.status != PM3_SUCCESS)) {
PrintAndLogEx(FAILED, "OTA finalize failed");
free(fw);
return PM3_EFAILED;
}
free(fw);
PrintAndLogEx(SUCCESS, "BWM firmware updated - the BWM will reboot into the new image");
PrintAndLogEx(HINT, "Give it a few seconds, then re-check with " _YELLOW_("hw status"));
return PM3_SUCCESS;
}
static command_t CommandTable[] = {
{"help", CmdHelp, AlwaysAvailable, "This help"},
{"-------------", CmdHelp, AlwaysAvailable, "----------------------- " _CYAN_("Operation") " -----------------------"},
@@ -2327,6 +2414,7 @@ static command_t CommandTable[] = {
{"bwmcharge", CmdBwmCharge, IfPm5, "Enable/disable BWM battery charging (PM5, one-shot)"},
{"bwmautooff", CmdBwmAutoOff, IfPm5, "Toggle auto power-off on USB unplug (PM5, BWM)"},
{"bwmwifi", CmdBWMWifi, IfPm5, "Bring up BWM WiFi (STA + TCP server) for a tcp: connection (PM5)"},
{"bwmupgrade", CmdBWMUpgrade, IfPm5, "Reflash BWM (ESP32) firmware over the BWM link, no header (PM5)"},
{"tune", CmdTune, IfPm3Lf, "Measure tuning of device antenna"},
{"decay", CmdDecay, IfPm3Present, "Measure HF antenna decay after field-off"},
{NULL, NULL, NULL, NULL}