lessen stack usage
This commit is contained in:
1 parent
ef2ffa2bb4
commit
453c192a32
1 file changed
+26
-5
@@ -85,7 +85,10 @@ void RunMod() {
|
||||
uint8_t flags = 0;
|
||||
FLAG_SET_UID_IN_DATA(flags, 4);
|
||||
// in case there is a read command received we shouldn't break
|
||||
uint8_t data[PM3_CMD_DATA_SIZE] = {0x00};
|
||||
// only the UID is ever read out of this by SimulateIso14443aInit(), at most
|
||||
// 10 bytes for a triple-cascade UID. It used to be PM3_CMD_DATA_SIZE, which
|
||||
// put 624 bytes on the stack for nothing.
|
||||
uint8_t data[10] = {0x00};
|
||||
|
||||
uint8_t visauid[7] = {0xE9, 0x66, 0x5D, 0x20};
|
||||
memcpy(data, visauid, 4);
|
||||
@@ -130,14 +133,18 @@ void RunMod() {
|
||||
#define DYNAMIC_RESPONSE_BUFFER_SIZE 512
|
||||
#define DYNAMIC_MODULATION_BUFFER_SIZE 1024
|
||||
|
||||
uint8_t dynamic_response_buffer[DYNAMIC_RESPONSE_BUFFER_SIZE] = {0};
|
||||
uint8_t dynamic_modulation_buffer[DYNAMIC_MODULATION_BUFFER_SIZE] = {0};
|
||||
// These live in BigBuf, not on the stack - together they are 1536 bytes, and
|
||||
// RunMod() already carries the deepest frame in the firmware. Same pattern as
|
||||
// SimulateIso14443aTagEx() in iso14443a.c. Filled in after the emulator is
|
||||
// initialized, because SimulateIso14443aInit() allocates from BigBuf too.
|
||||
uint8_t *dynamic_response_buffer = NULL;
|
||||
uint8_t *dynamic_modulation_buffer = NULL;
|
||||
|
||||
// Command response - handler
|
||||
tag_response_info_t dynamic_response_info = {
|
||||
.response = dynamic_response_buffer,
|
||||
.response = NULL,
|
||||
.response_n = 0,
|
||||
.modulation = dynamic_modulation_buffer,
|
||||
.modulation = NULL,
|
||||
.modulation_n = 0
|
||||
};
|
||||
|
||||
@@ -279,6 +286,20 @@ void RunMod() {
|
||||
continue;
|
||||
}
|
||||
|
||||
dynamic_response_buffer = BigBuf_calloc(DYNAMIC_RESPONSE_BUFFER_SIZE);
|
||||
dynamic_modulation_buffer = BigBuf_calloc(DYNAMIC_MODULATION_BUFFER_SIZE);
|
||||
if (dynamic_response_buffer == NULL || dynamic_modulation_buffer == NULL) {
|
||||
BigBuf_free_keep_EM();
|
||||
reply_ng(CMD_HF_MIFARE_SIMULATE, PM3_EMALLOC, NULL, 0);
|
||||
DbpString(_RED_("Cannot allocate the response buffers!"));
|
||||
SpinDelay(500);
|
||||
state = STATE_READ;
|
||||
DbpString("Initialized [ "_YELLOW_("reading mode") " ]");
|
||||
continue;
|
||||
}
|
||||
dynamic_response_info.response = dynamic_response_buffer;
|
||||
dynamic_response_info.modulation = dynamic_modulation_buffer;
|
||||
|
||||
// We need to listen to the high-frequency, peak-detected path.
|
||||
iso14443a_setup(FPGA_HF_ISO14443A_TAGSIM_LISTEN);
|
||||
|
||||
|
||||
Reference in new issue
Block a user