95 lines
3.3 KiB
TOML
95 lines
3.3 KiB
TOML
# A bind value of 0.0.0.0 means any network this computer can access
|
|
# You can chage this to a specfic network e.g. "192.168.1.101" here
|
|
# Or to no networks e.g. this computer only "127.0.0.1"
|
|
bind = "0.0.0.0"
|
|
|
|
# Default port is 8554 but you can change it by uncommenting the following
|
|
# bind_port = 8554
|
|
|
|
# Uncomment the following and supply a path to a valid PEM
|
|
# to activate TLS encryption.
|
|
# The PEM should contain the certificate and the private key
|
|
# If TLS is activated you must connect with "rtsps://" and not "rtsp://"
|
|
# certificate = "/path/to/pem/with/cert/and/key"
|
|
|
|
# Choose if the client is required to provide a certificate signed by the server's CA.
|
|
# none|requested|required - default none
|
|
# tls_client_auth = "required"
|
|
|
|
# You can password protect the rtsp server mount points by adding users
|
|
# like the following me and someone. If you do not add [[users]]
|
|
# then anyone can connect without a password or username
|
|
# To access such a stream try using a url such as "rtsp://me:mepass@192.168.1.101/driveway"
|
|
|
|
# [[users]]
|
|
# name = "me"
|
|
# pass = "mepass"
|
|
#
|
|
# [[users]]
|
|
# name = "someone"
|
|
# pass = "someonepass"
|
|
|
|
|
|
[[cameras]]
|
|
name = "driveway"
|
|
username = "admin"
|
|
password = "12345678"
|
|
address = "192.168.1.187:9000"
|
|
# mqtt.broker_addr = "192.168.1.122"
|
|
# mqtt.port = 1883
|
|
# mqtt.credentials = ["mqtt_user", "mqtt_password"]
|
|
|
|
# If you use a battery camera: **Instead** of an `address` supply the uid
|
|
# as follows
|
|
# uid = "ABCD01234567890EFG"
|
|
|
|
# By default any of the users can connect (or anyone at all if no users are specfied)
|
|
# You can uncomment the following to permit only specfic users
|
|
# permitted_users = [ "me" ]
|
|
|
|
# By default "both" "mainStream" and "subStream" are connected
|
|
# If your device has user connection limits try a single stream instead.
|
|
# stream = "mainStream"
|
|
|
|
# By default neolink will use any means to connect to the camera
|
|
# from a UID
|
|
# This include relaying via reolink servers
|
|
# This variable `discovery` controls the method of UID discovery
|
|
# - Possible values
|
|
# "relay" # Any means including connecting and transmitting through reolink
|
|
# "map" # Register our local ip address with reolink and ask the camera to connect to us but don't relay data through reolink
|
|
# "remote" # Register our local ip address with reolink but only permit same network connections (useful if broadcast is not possible)
|
|
# "local" # Do not contact reolink servers at all. Rely soley on local UDP broadcast based discovery
|
|
#
|
|
# discovery = "relay"
|
|
|
|
# Certain types of camera emit status messages (such as battery levels)
|
|
#
|
|
# By default we hide these status messages from the user but you can instead requst that
|
|
# they be printed to stdout using print_format
|
|
#
|
|
# Valid values are:
|
|
# - None
|
|
# - Human
|
|
# - Xml
|
|
#
|
|
# print_format = "None"
|
|
|
|
|
|
[[cameras]]
|
|
name = "storage shed"
|
|
username = "admin"
|
|
password = "987654321"
|
|
address = "192.168.1.245:9000"
|
|
# If you use a battery camera: **Instead** of an `address` supply the uid
|
|
# as follows
|
|
# uid = "ABCD01234567890EFG"
|
|
|
|
# If you use an NVR that relays several camera connections you can choose which
|
|
# camera to connect to with by setting the `channel_id`
|
|
#
|
|
# By default channel_id = 0. Eg the first connected camera on the device
|
|
# **Note**: that unlike in the offical client the numbering starts from 0 not 1.
|
|
# An 8 channel NVR would have channels 0 through 7
|
|
# channel_id = 0
|