Files
neolink/dissector/protocol.md
T

291 lines
8.6 KiB
Markdown

# BC Protocol
This is an attempt to document the BC protocol. It is far from complete
but should serve as a good basis for those wishing to develop apps for
BC cameras.
## Messages
Each message has the general format:
- Header: 20-24 bytes
- Message Body
### Header
The header has the format:
| magic | message id | message length | encryption offset | encrypt | message class |
|--------------|--------------|----------------|-------------------|------------|---------------|
| f0 de bc 0a | 01 00 00 00 | 2c 07 00 00 | 00 00 00 01 | 01 dc | 14 65 |
- Magic 4 bytes
- ID 4 bytes
- Message length 4 bytes
- Encryption offset 4 bytes
- Encryption flag 1 byte
- Unknown 1 byte
- Message class 2 bytes
Or
| Magic | Message ID | Message Length | Encryption Offset | Status Code | Message Class | Payload Offset |
|--------------|--------------|----------------|-------------------|-------------------|---------------|----------------|
| f0 de bc 0a | 01 00 00 00 | 28 01 00 00 | 00 00 00 01 | c8 00 | 14 64 | 00 00 00 00 |
- Magic 4 bytes
- ID 4 bytes
- Message length 4 bytes
- Encryption offset 4 bytes
- Status Code 2 bytes
- Message class 2 bytes
- Binary offset 4 bytes (Presence depend on message class)
#### Magic
The magic bytes for BC messages is always `f0 de bc 0a` for client <-> device.
Or magic `a0 cd ed 0f` for device <-> device, eg NVR <-> IPC.
When receiving packet these should be used to quickly discard invalid packets.
#### Message ID
Each function in BC has its own message ID. For example login is 1, video data
is 3, motion detection is 33.
For a more complete list please see the [messages doc](dissector/messages.md)
#### Message length
The message length contains the full length of the data to follow the header
this includes both the XML and binary parts.
#### Encryption offset
The encryption offset is used as part of the decoding process. It is combined
with the key to decrypt the data.
Here is an example decrypter in rust
```rust
const XML_KEY: [u8; 8] = [0x1F, 0x2D, 0x3C, 0x4B, 0x5A, 0x69, 0x78, 0xFF];
pub fn crypt(offset: u32, buf: &[u8]) -> Vec<u8> {
let key_iter = XML_KEY.iter().cycle().skip(offset as usize % 8);
key_iter
.zip(buf)
.map(|(key, i)| *i ^ key ^ (offset as u8))
.collect()
}
```
In short the key is offset by the encryption offset in the header. Then each
encrypted byte is paired with the offseted keys bytes (looping the offseted
key as necessary). Then each byte is XORed with the paired key byte and the
offset.
The key is the same for all cameras.
Older cameras do not use encryption and all messages are sent as plain text.
The offset bytes are actually made up of other useful information
channel_id 1 byte - NVR channel related to request/response or `00` if N/A.
stream_id 1 byte - `00`=clear, `01`=fluent, `04`=balanced
unknown 1 byte - Always `00`
message_handle 1 byte - client increments per request, replies use request handle
#### Encryption Flag
Client will send the number `0xXXdc` and the server will reply `0xXXdd`.
Where `XX` is one of the following.
- 0 Unencrypted
- 1 BC Encryption
- 2 AES Encryption (Camera)
- 3 AES Encryption (Client)
`dc` means this encryption protol or lower. So `0x01dc` means BC on no encryption
whereas `0x03dc` means AES, BC or Unencrypted.
`dd` is the reply that the camera sends to the `dc` request. It is the chosen
protocol that will be used.
**Note:** When requesting AES the client sends `0x03dc` and the camera replies `0x02dc`.
We are not sure why.
Encryption is negotiated in the login request.
#### Status Code
In a request this is set to `00 00`.
In a reply this is a http style response code.
`c8 00` = 200 OK
`90 01` = 400 Bad Request
#### Message class
The message class determines the length of the header. The following classes
and header lengths are known.
- 0x6514: "legacy" 20 bytes
- 0x6614: "modern" 20 bytes
- 0x6414: "modern" 24 bytes
- 0x0000: "modern" 24 bytes
#### Payload offset
For messages that contain the payload offset field this represents where to start
the payload part of the message. The total length of the message
(extension XML + payload) is equal to the message length in the header
so Payload Offset is total_length - this_offset. Where as this field also represents the end of the
extension XML part of the message.
# Login
For message details see the [docs](dissector/messages.md)
Clients should login by
- Send legacy login message
- User and pass MD5'ed
- Capped at 32 bytes with a null terminator
- Bytes 32 is always zero so only first 31 bytes are compared
- Receive modern upgrade message with nonce in XML
- Send modern login:
- User and pass concatenated with the nonce
- Send MD5'ed user and password
- Receive reply with device info
# Starting Video
Video is requested and received with message ID 3.
Video is requested with an XML of the following format:
```xml
<?xml version="1.0" encoding="UTF-8" ?>
<body>
<Preview version="1.1">
<channelId>0</channelId>
<handle>0</handle>
<streamType>mainStream</streamType>
</Preview>
</body>
```
streamType can be either
- `mainStream` in which case it will be HD
- `subStream` in which case it will be SD
channelId is part of the NVR when multiple cameras use the same IP. In this
case each camera has its own channelId.
The `handle` is used when multiple streams are requested in a single login.
This number should be unique for each stream. If not then that stream
(Clear or Fluent) will not work until the camera is reset.
The reply is first a message with the following Extension Xml
```xml
<?xml version="1.0" encoding="UTF-8" ?>
<Extension version="1.1">
<binaryData>1</binaryData>
</Extension>
```
After which all message bodies of type id 3 are binary.
The binary represents a stream of data that can be interrupted by packet
boundaries. Clients should create a buffer and pop bytes for processing when
complete media packets are received. Media packets descriptions can be found in
the [docs](dissector/mediapacket.md)
# Other Function
Other data can be received from the camera by sending the appropriate header to
the camera. For example sending the header for ID 78
| Magic | Message ID | Message Length | Encryption Offset | Status Code | Message Class | Payload Offset |
|--------------|--------------|----------------|-------------------|-------------------|---------------|----------------|
| f0 de bc 0a | 4e 00 00 00 | d3 00 00 00 | 08 db 9c 00 | c8 00 | 00 00 | 00 00 00 00 |
The camera will reply with an xml with brightness and contrast
```xml
<?xml version="1.0" encoding="UTF-8" ?>
<body>
<VideoInput version="1.1">
<channelId>0</channelId>
<bright>128</bright>
<contrast>128</contrast>
<saturation>128</saturation>
<hue>128</hue>
</VideoInput>
</body>
```
Some message IDs also require input along with the request header. For example
ID 151 which is the users ability info requires the header
| Magic | Message ID | Message Length | Encryption Offset | Status Code | Message Class | Payload Offset |
|--------------|--------------|----------------|-------------------|-------------------|---------------|----------------|
| f0 de bc 0a | 97 00 00 00 | a7 00 00 00 | 00 00 00 02 | 00 00 | 14 64 | a7 00 00 00 |
and the body of
```xml
<?xml version="1.0" encoding="UTF-8" ?>
<Extension version="1.1">
<userName>...</userName> <!-- Plain text username -->
<token>system, network, alarm, record, video, image</token>
</Extension>
```
Which contains the plain text of the username of interest and the tokens for
abilities you want to know about.
Details of expected formats should be found from the
[docs](dissector/messages.md)
#### AES Encryption
If the encryption flag returned from the camera is `0x02dd` then AES encryption will be used.
The cameras use AES cfb128 with an IV of `0123456789abcdef` the key is made as follows
- Concatenated the `NONCE` from login with a `-` then with your plain text password
- MD5 Hash this concatenated string
- Represent the hash as hex string in all caps
- Take the first 16 characters as the encryption key
Here is an example:
```rust
use aes::Aes128;
use cfb_mode::cipher::{NewStreamCipher, StreamCipher};
use cfb_mode::Cfb;
const IV: &[u8] = b"0123456789abcdef";
let key_phrase = format!("{}-{}", nonce, passwd);
let key_phrase_hash = format!("{:X}\0", md5::compute(&key_phrase))
.to_uppercase()
.into_bytes();
let key = key_phrase_hash[0..16];
let mut decrypted = encrypted.to_vec();
Cfb::<Aes128>::new(key.into(), IV.into()).decrypt(&mut decrypted);
return decrypted;
```