Files
neolink/README.md
T
2023-04-05 17:48:48 +07:00

245 lines
7.5 KiB
Markdown

# Neolink
![CI](https://github.com/QuantumEntangledAndy/neolink/workflows/CI/badge.svg)
Neolink is a small program that acts as a proxy between Reolink IP cameras and
normal RTSP clients.
Certain cameras, such as the Reolink B800, do not implement ONVIF or RTSP, but
instead use a proprietary "Baichuan" protocol only compatible with their apps
and NVRs (any camera that uses "port 9000" will likely be using this protocol).
Neolink allows you to use NVR software such as Shinobi or Blue Iris to receive
video from these cameras instead.
The Reolink NVR is not required, and the cameras are unmodified.
Your NVR software connects to Neolink, which forwards the video stream from the
camera.
The Neolink project is not affiliated with Reolink in any way; everything it
does has been reverse engineered.
## This Fork
This fork is an extension of [thirtythreeforty's](https://github.com/thirtythreeforty/neolink)
with additional features not yet in upstream master.
**Major Features**:
- MQTT
- Motion Detection
- Paused Streams (when no rtsp client or no motion detected)
- Save a still image to disk
**Minor Features**:
- Improved error messages when your missing gstreamer plugins
- Protocol more closely follows offical reolink format
- Possibly can handle more simulatenous connections
- More ways to connect to the camera. Including Relaying through reolink servers
- Camera battery levels can be displayed in the log
## Installation
Download from the [release page](https://github.com/QuantumEntangledAndy/neolink/releases)
Extract the zip
Install the latest [gstreamer](https://gstreamer.freedesktop.org/download/) (1.20.5 as of writing this).
- **Windows**: ensure you install `full` when prompted in the MSI options.
- **Mac**: Install the dpkg version on the offical gstreamer website over the brew version
- **Ubuntu/Debian**: These packages should work
```bash
sudo apt install \
libgstrtspserver-1.0-0 \
libgstreamer1.0-0 \
libgstreamer-plugins-bad1.0-0 \
gstreamer1.0-plugins-good \
gstreamer1.0-plugins-bad
```
Make a config file see below.
## Config/Usage
### RTSP
To use `neolink` you need a config file.
There's a more complete example [here](https://github.com/QuantumEntangledAndy/neolink/blob/master/sample_config.toml),
but the following should work as a minimal example.
```toml
bind = "0.0.0.0"
[[cameras]]
name = "Camera01"
username = "admin"
password = "password"
uid = "ABCDEF0123456789"
[[cameras]]
name = "Camera02"
username = "admin"
password = "password"
uid = "BCDEF0123456789A"
address = "192.168.1.10"
```
Create a text file with called `neolink.toml` in the same folder as the neolink binary. With your config options.
When ready start `neolink` with the following command
using the terminal in the same folder the neolink binary is in.
```bash
./neolink rtsp --config=neolink.toml
```
### Discovery
To connect to a camera using a UID we need to find the IP address of the camera with that UID
The IP is discovered with four methods
1. Local discovery: Here we send a broadcast on all visible networks asking the local
network if there is a camera with this UID. This only works if the network supports broadcasts
If you know the ip address you can put it into the `address` field of the config and attempt a
direct connection without broadcasts. This requires a route from neolink to the camera.
2. Remote discovery: Here a ask the reolink servers what the IP address is. This requires that
we contact reolink and provide some basic information like the UID. Once we have this information
we connect directly to the local IP address. This requires a route from neolink to the camera and
for the camera to be able to contact the reolink IPs.
3. Map discovery: In this case we register our IP address with reolink and ask the camera to connect to us.
Once the camera either polls/recives a connect request from the reolink servers the camera will then
initiate a connect to neolink. This requires that our IP and the reolink IPs are reacable from the camera.
4. Relay: In this case we request that reolink relay our connection. Neolink nor the camera need to be able to
direcly contact each other. But both neolink and the camera need to be able to contact reolink.
This can be controlled with the config
```toml
discovery = "local"
```
In the `[[cameras]]` section of the toml.
Possible values are `local`, `remote`, `map`, `relay` later values implictly enable prior methods.
### MQTT
To use mqtt you will to adjust your config file as such:
```toml
bind = "0.0.0.0"
[[cameras]]
name = "Camera01"
username = "admin"
password = "password"
uid = "ABCDEF0123456789"
[cameras.mqtt]
server = "127.0.0.1" # Address of the mqtt server
port = 1883 # mqtt servers port
credentials = ["username", "password"] # mqtt server login details
```
Then to start the mqtt connection run the following:
```bash
./neolink mqtt --config=neolink.toml
```
Neolink will publish these messages:
Messages are prefixed with `neolink/{CAMERANAME}`
Control messages:
- `/control/led [on|off]` Turns status LED on/off
- `/control/ir [on|off|auto]` Turn IR lights on/off or automatically via light detection
- `/control/reboot` Reboot the camera
- `/control/ptz [up|down|left|right|in|out]` (amount) Control the PTZ movements, amount defaults to 32.0
- `/control/pir [on|off]`
Status Messages:
`/status offline` Sent when the neolink goes offline this is a LastWill message
`/status disconnected` Sent when the camera goes offline
`/status/battery` Sent in reply to a `/query/battery` an XML encoded version of the battery status
`/status/pir` Sent in reply to a `/query/pir` an XML encoded version of the pir status
Query Messages:
`/query/battery` Request that the camera reports its battery level
`/query/pir` Request that the camera reports its pir status
### Pause
To use the pause feature you will need to adjust your config file as such:
```toml
bind = "0.0.0.0"
[[cameras]]
name = "Camera01"
username = "admin"
password = "password"
uid = "ABCDEF0123456789"
[cameras.pause]
on_motion = true # Should pause when no motion
on_client = true # Should pause when no rtsp client
mode = "none" # What to do when paused values are: none, black, still, test
timeout = 2.1 # How long to wait after motion stops before pausing
```
Then start the rtsp server as usual:
```bash
./neolink rtsp --config=neolink.toml
```
### Battery Levels
If you have a battery camera and would like to see the battery messages in the log
add the following to your config
```toml
[[cameras]]
# Usual camera options like uid etc
print_format = "Human"
```
You can also print into xml format with `print_format = "Xml"` which can then be passed
by a script for processing.
### Docker
[Docker](https://hub.docker.com/r/quantumentangledandy/neolink) builds are also provided
in multiple architectures. The latest tag tracks master while each branch gets it's own tag.
```bash
docker pull quantumentangledandy/neolink
```
### Image
You can write an image from the stream to disk using:
```bash
neolink image --config=config.toml --file-path=filepath CameraName
```
Where filepath is the path to save the image to and CameraName is the name of the camera
from the config to save the image from.
File is always jpeg and the extension given in filepath will be added or changed to reflect this.
## License
Neolink is free software, released under the GNU Affero General Public License
v3.
This means that if you incorporate it into a piece of software available over
the network, you must offer that software's source code to your users.