Updated building on windows instructions
1 parent
553345d96e
commit
7f5c7377ca
1 file changed
+33
-17
+33
-17
@@ -16,33 +16,49 @@ To build the software and run it on the Controller we need to interface the RP20
|
||||
|
||||
### Windows
|
||||
|
||||
1. Download and install [Pico setup for Windows](https://github.com/raspberrypi/pico-setup-windows) and make sure to check the box for also installing Zadig. You might also need to install [Build Tools for Visual Studio 2022](https://visualstudio.microsoft.com/downloads/)
|
||||
2. Clone and build Pico repos either by checking the box at the end of the setup.
|
||||
3. Connect Raspberry Pi Pico via USB while holding the reset button. Your Pi Pico should now be visible in Windows explorer as a mass storage device.
|
||||
4. Download the latest prebuilt "picoprobe.uf2" release binary from [here](https://github.com/raspberrypi/picoprobe/releases) or download it from the [Raspberry Pi Website](https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html#debugging-using-another-raspberry-pi-pico). Alternatively, you can get the file by navigating to the picoprobe/build subfolder.
|
||||
5. Copy "picoprobe.uf2" to your Pi Pico. The Pi Pico onboard LED should now light up.
|
||||
6. Navigate to the tools subfolder in your installation folder and open zadig.exe
|
||||
7. Install the picoprobe driver using "zadig.exe" as shown in [Getting started with Raspberry Pi Pico - Appendix A - Page 62](https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf#%5B%7B%22num%22%3A65%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C115%2C692.106%2Cnull%5D)
|
||||
8. Connect GND to GND, VBUS to +V, GPIO2 to SWCLK, GPIO3 to SWDIO as shown in the picture below.
|
||||
|
||||
1. Connect Raspberry Pi Pico via USB while holding the reset button. Your Pi Pico should now be visible in Windows explorer as a mass storage device.
|
||||
2. Download the latest prebuilt "picoprobe.uf2" release binary from [here](https://github.com/raspberrypi/picoprobe/releases) or download it from the [Raspberry Pi Website](https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html#debugging-using-another-raspberry-pi-pico).
|
||||
3. Copy "picoprobe.uf2" to your Pi Pico. The Pi Pico onboard LED should now light up.
|
||||
4. Connect GND to GND, GPIO2 to SWCLK, GPIO3 to SWDIO, VBUS to +V, as shown in the picture below .
|
||||
<img src="https://github.com/gab-k/RP2040-Decoder/blob/main/docs/svg/Debug_Connections.svg" width="700"/>
|
||||
|
||||
9. To finally build and flash, open the Developer Command Prompt for Pico and type the following commands:
|
||||
5. Download and install [Pico setup for Windows](https://github.com/raspberrypi/pico-setup-windows)
|
||||
6. Download and install [MSYS2](https://www.msys2.org/)
|
||||
7. Open a MSYS2 MINGW64 shell window
|
||||
8. Update all pacman packages
|
||||
```sh
|
||||
pacman -Syu
|
||||
```
|
||||
9. Install mingw-w64-x86_64-toolchain (choose to install all)
|
||||
```sh
|
||||
pacman -S mingw-w64-x86_64-toolchain
|
||||
```
|
||||
10. Add "C:\msys64\mingw64\bin" to your users PATH environment variable. If you have choosen to not use the default directory for MSYS2 add the one you have choosen. [How to do this?](https://www.computerhope.com/issues/ch000549.htm)
|
||||
11. Open the Pico - Developer Powershell
|
||||
12. Navigate to a folder you like and clone the project repository
|
||||
```sh
|
||||
git clone https://github.com/gab-k/RP2040-Decoder
|
||||
```
|
||||
13. Enter cloned repository, create and enter build directory
|
||||
```sh
|
||||
git clone https://github.com/gab-k/RP2040-Decoder.git
|
||||
cd RP2040-Decoder
|
||||
mkdir build
|
||||
cd build
|
||||
cmake -G "NMake Makefiles" ..
|
||||
nmake
|
||||
openocd -f interface/picoprobe.cfg -f target/rp2040.cfg -c "program RP2040-decoder.elf verify reset exit"
|
||||
```
|
||||
|
||||
(Note: On newer SDKs use this command: openocd -f interface/cmsis-dap.cfg -f target/rp2040.cfg -c "adapter speed 5000" -c"program rp2040-decoder.elf verify reset exit")
|
||||
```
|
||||
14. Run CMake and the mingw32-make to build
|
||||
```sh
|
||||
cmake -G "MinGW Makefiles" -DCMAKE_BUILD_TYPE=Debug ..
|
||||
mingw32
|
||||
```
|
||||
15. Flash the decoders software using openocd
|
||||
```sh
|
||||
openocd -f interface/cmsis-dap.cfg -f target/rp2040.cfg -c "adapter speed 5000" -c"program rp2040-decoder.elf verify reset exit"
|
||||
```
|
||||
|
||||
### Other OS
|
||||
|
||||
Please refer to [Getting started - Pico](https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf). Chapter 3 & 5 and Appendix A are the most relevant but you might also refer to chapter 9.1 if you are using macOS.
|
||||
The first four steps are identical to the steps described above for windows users. Regarding building and flashing, please refer to [Getting started - Pico](https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf). Chapter 3 & 5 and Appendix A are the most relevant but you might also refer to chapter 9.1 if you are using macOS.
|
||||
|
||||
|
||||
## 4. Wiring and initial startup
|
||||
|
||||
Reference in new issue
Block a user