better description what can be connected
1 parent
7995c845fc
commit
669dcd024e
1 file changed
+1
-1
+1
-1
@@ -44,7 +44,7 @@ Please refer to [Getting started - Pico](https://datasheets.raspberrypi.com/pico
|
||||
## 4. Wiring and initial startup
|
||||
<img src="https://github.com/gab-k/RP2040-Decoder/blob/main/docs/svg/Wiring_diagram.svg" width="700"/>
|
||||
|
||||
The illustration above shows an example wiring configuration. A Free-wheeling diode should be used when switching inductive loads!
|
||||
The illustration above shows an example wiring configuration, you can connect up to 4 outputs(up to 400mA) and 6 GPIOs for lighter loads or custom applications. A Free-wheeling diode should be used when switching inductive loads!
|
||||
|
||||
Another important note is that when the decoder is put into operation for the first time, it automatically performs a motor calibration, which is required for feedforward control. The calibration takes about one to two minutes.
|
||||
|
||||
Reference in new issue
Block a user