71 lines
2.6 KiB
C
71 lines
2.6 KiB
C
//////////////////////////
|
|
// RP2040-Decoder //
|
|
// Gabriel Koppenstein //
|
|
// shared.c //
|
|
//////////////////////////
|
|
|
|
#include "shared.h"
|
|
|
|
uint8_t speed_step_target = 0;
|
|
uint8_t speed_step_target_prev = 0;
|
|
|
|
// Functions in shared.c can be accessed by both cores
|
|
// Measures Back-EMF voltage (proportional to the rotational speed of the motor) on GPIO 28 and GPIO 29 respectively (depending on direction)
|
|
float measure(uint8_t total_iterations,
|
|
uint8_t measurement_delay_us,
|
|
uint8_t l_side_arr_cutoff,
|
|
uint8_t r_side_arr_cutoff,
|
|
bool direction){
|
|
uint32_t sum = 0;
|
|
uint16_t adc_val[total_iterations];
|
|
int32_t j = 0;
|
|
uint16_t key;
|
|
pwm_set_gpio_level(MOTOR_FWD_PIN, 0);
|
|
pwm_set_gpio_level(MOTOR_REV_PIN, 0);
|
|
adc_select_input((!direction)+2);
|
|
busy_wait_us(measurement_delay_us);
|
|
adc_run(true);
|
|
for (int32_t i = 0; i < total_iterations; ++i) {
|
|
//Take adc value out of fifo when available, then do one step of insertion sort.
|
|
adc_val[i] = adc_fifo_get_blocking();
|
|
key = adc_val[i];
|
|
j = i - 1;
|
|
while (j >= 0 && adc_val[j] > key) {
|
|
adc_val[j + 1] = adc_val[j];
|
|
j--;
|
|
}
|
|
adc_val[j + 1] = key;
|
|
}
|
|
adc_run(false);
|
|
//discard x entries beginning from the lowest entry of the array (counting up); x = msr.l_side_arr_cutoff
|
|
//discard y entries beginning from the highest index of the array (counting down); y = msr.r_side_arr_cutoff
|
|
for (int32_t i = l_side_arr_cutoff; i < total_iterations - r_side_arr_cutoff ; ++i) {
|
|
sum += adc_val[i];
|
|
}
|
|
float res = (float)sum / (float)( total_iterations - (l_side_arr_cutoff + r_side_arr_cutoff) );
|
|
// return true to keep the repeating timer active
|
|
return res;
|
|
}
|
|
|
|
// retrieve 4Bytes from CV_ARRAY_FLASH at once and return 32-Bit value
|
|
uint32_t get_32bit_CV (uint16_t CV_start_index){
|
|
uint8_t byte_3 = CV_ARRAY_FLASH[CV_start_index];
|
|
uint8_t byte_2 = CV_ARRAY_FLASH[CV_start_index+1];
|
|
uint8_t byte_1 = CV_ARRAY_FLASH[CV_start_index+2];
|
|
uint8_t byte_0 = CV_ARRAY_FLASH[CV_start_index+3];
|
|
return (byte_0) + (byte_1<<8) + (byte_2<<16) + (byte_3<<24);
|
|
}
|
|
|
|
|
|
// retrieve 2Bytes from CV_ARRAY_FLASH at once and return 16-Bit value
|
|
uint16_t get_16bit_CV (uint16_t CV_start_index){
|
|
uint8_t byte_1 = CV_ARRAY_FLASH[CV_start_index];
|
|
uint8_t byte_0 = CV_ARRAY_FLASH[CV_start_index+1];
|
|
return (byte_0) + (byte_1<<8);
|
|
}
|
|
|
|
bool get_direction_of_speed_step(uint8_t speed_step){
|
|
// Shift by 7 Bytes to move bit7 into bit0 position and return
|
|
return speed_step >> 7;
|
|
}
|