- fixed undesired behaviour for direction change while decelerating - adjusted default value for CV_54 & CV_55
43 lines
1.5 KiB
Markdown
43 lines
1.5 KiB
Markdown
RP2040-Decoder
|
|
===============
|
|
|
|
This Project is a DIY DCC Decoder for model railroad locomotives which aims to be cost effective.
|
|
|
|
Features
|
|
--------
|
|
|
|
- DCC digital signal decoding
|
|
- Motor load/speed control
|
|
- 4 Outputs to drive loads up to 400mA each
|
|
- 6 GPIO for lighter loads or custom applications
|
|
- Programmable on programming track
|
|
- CV Function Mapping
|
|
- Board size of 25x20 mm
|
|
|
|
Getting Started
|
|
------------
|
|
|
|
The [Wiki - Getting started](https://github.com/gab-k/RP2040-Decoder/wiki/Getting-started) page provides a brief overview.
|
|
A Description on how to compile and flash the decoder using Windows can be found [here](https://github.com/gab-k/RP2040-Decoder/wiki/Quick-start-guide-(Windows)).
|
|
|
|
|
|
License
|
|
-------
|
|
- Software - MIT license
|
|
- Hardware - CERN Open Hardware Licence Version 2 - Permissive
|
|
- [LICENSE](https://github.com/1nct/RP2040-Decoder/blob/main/LICENSE)
|
|
|
|
------------
|
|
Further details about the project can be found here: [RP2040-Decoder Wiki](https://github.com/GabrielKoppenstein/pico-decoder/wiki)
|
|
|
|
Note: The decoder is still in early development, there might (will) be bugs as its not tested that much yet.
|
|
So suggestions on how to improve things and bug reports are always much appreciated.
|
|
The wiki is also work in progress and will be updated to be as comprehensive as possible.
|
|
|
|
------------
|
|
<p float="left">
|
|
<img src="/docs/png/RP2040-Decoder-Rev_0_2_front.png" alt="PCB Front Side Image" title="Front" width="400"/>
|
|
<img src="/docs/png/RP2040-Decoder-Rev_0_2_back.png" alt="PCB Back Side Image" title="Back" width="400"/>
|
|
</p>
|
|
|