- Refactored core0.c to most functions are now static functions. - Introduced new structures (`dcc_packet_t` and `dcc_ring_buffer_t`) for DCC packet data handling and packet detection. - DCC pin interrupt now only does packet detection and no evaluation, evaluation is now done inside the main loop. - Refactor message evaluation logic. - Implemented hard fault handler, now rebooting when hardfault is encountered. - Optimized initialization sequence in main(). - Controller and speed helper functions now run outside the timer interrupts, instead flags are set, which are checked inside the core1 main loop. - Added enumeration for speed steps to improve readability. (However they are yet to be used) - Added various documentation comments. - Added various LOG() messages. - Added python script for generating speed_step typedef definition.
63 lines
1.8 KiB
C
63 lines
1.8 KiB
C
//////////////////////////
|
|
// RP2040-Decoder //
|
|
// Gabriel Koppenstein //
|
|
// shared.c //
|
|
//////////////////////////
|
|
|
|
#include "shared.h"
|
|
|
|
// TODO: Implement enum typedef for speed steps, also getter and setter functions checking validity of speed step values.
|
|
uint8_t speed_step_target = 0;
|
|
uint8_t speed_step_target_prev = 0;
|
|
static error_t error_state = 0;
|
|
|
|
// Functions in shared.c are accessed by both cores
|
|
|
|
// retrieve 4Bytes from CV_ARRAY_FLASH at once and return 32-Bit value
|
|
uint32_t get_32bit_CV (uint16_t CV_start_index){
|
|
uint8_t byte_3 = CV_ARRAY_FLASH[CV_start_index];
|
|
uint8_t byte_2 = CV_ARRAY_FLASH[CV_start_index+1];
|
|
uint8_t byte_1 = CV_ARRAY_FLASH[CV_start_index+2];
|
|
uint8_t byte_0 = CV_ARRAY_FLASH[CV_start_index+3];
|
|
return (byte_0) + (byte_1<<8) + (byte_2<<16) + (byte_3<<24);
|
|
}
|
|
|
|
|
|
// retrieve 2Bytes from CV_ARRAY_FLASH at once and return 16-Bit value
|
|
uint16_t get_16bit_CV (uint16_t CV_start_index){
|
|
uint8_t byte_1 = CV_ARRAY_FLASH[CV_start_index];
|
|
uint8_t byte_0 = CV_ARRAY_FLASH[CV_start_index+1];
|
|
return (byte_0) + (byte_1<<8);
|
|
}
|
|
|
|
direction_t get_direction_of_speed_step(uint8_t speed_step){
|
|
// Shift by 7 Bytes to move bit7 into bit0 position and return
|
|
return speed_step >> 7;
|
|
}
|
|
|
|
void set_error(error_t err){
|
|
error_state |= err;
|
|
#ifdef RP2040_DECODER_DEFAULT_LED_PIN
|
|
gpio_put(RP2040_DECODER_DEFAULT_LED_PIN, true);
|
|
#endif
|
|
}
|
|
|
|
void clear_error(error_t err){
|
|
error_state &= (~err);
|
|
if (error_state == 0){
|
|
#ifdef RP2040_DECODER_DEFAULT_LED_PIN
|
|
gpio_put(RP2040_DECODER_DEFAULT_LED_PIN, false);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
void clear_all_errors(){
|
|
error_state = 0;
|
|
#ifdef RP2040_DECODER_DEFAULT_LED_PIN
|
|
gpio_put(RP2040_DECODER_DEFAULT_LED_PIN, false);
|
|
#endif
|
|
}
|
|
|
|
error_t get_error_state(){
|
|
return error_state;
|
|
} |