Replace '≙' with '='

This commit is contained in:
gab-k committed 2024-01-03 09:44:56 +01:00
1 parent baf9ea6081
commit 9b8906f476
2 files changed
+9 -9

No files matched your search

+8 -8
View File
@@ -1,7 +1,7 @@
#pragma once
#define CV_ARRAY_SIZE 512
// All CVs are 8-bit numbers ranging from (0 - 255)dec ≙ (0b00000000 - 0b11111111)bin ≙ (0x00 - 0xFF)hex
// Note : CV_1 ≙ index 0, CV_2 ≙ index 1, CV_3 ≙ index 2, ...
// All CVs are 8-bit numbers ranging from (0 - 255)dec = (0b00000000 - 0b11111111)bin = (0x00 - 0xFF)hex
// Note : CV_1 = index 0, CV_2 = index 1, CV_3 = index 2, ...
uint8_t CV_ARRAY_DEFAULT [CV_ARRAY_SIZE] = {
0b00000011, //CV_1 - Basic address - CV_1 = 0 and CV_1 > 127 are not valid - Default = 3
@@ -60,20 +60,20 @@ uint8_t CV_ARRAY_DEFAULT [CV_ARRAY_SIZE] = {
0b00000000, //CV_45 -
0b00000000, //CV_46 -
// Speed controller - Configuration ////////////////////////////////////////////////////////////////////////////////
0b00110010, //CV_47 - Feed-forward gain k_ff ≙ CV_47/10000 Default = 50 -> 0.005 //
0b00110010, //CV_47 - Feed-forward gain k_ff = CV_47/10000 Default = 50 -> 0.005 //
0b00001010, //CV_48 - PID Control low pass filter time constant (tau) in ms //
0b00000101, //CV_49 - PID Control sampling time t in ms //
0b00011001, //CV_50 - PID Control I_Factor ≙ CV_50/10 Default = 25 -> 2.5 //
0b00110010, //CV_51 - PID Control D_Factor ≙ CV_51/10000 Default = 50 -> 0.005 //
0b01100100, //CV_52 - PID Integral Limit positive ≙ CV_52*10 Default = 100 -> +1000 //
0b01100100, //CV_53 - PID Integral Limit negative ≙ CV_53*(-10) Default = 100 -> -1000 //
0b00011001, //CV_50 - PID Control I_Factor = CV_50/10 Default = 25 -> 2.5 //
0b00110010, //CV_51 - PID Control D_Factor = CV_51/10000 Default = 50 -> 0.005 //
0b01100100, //CV_52 - PID Integral Limit positive = CV_52*10 Default = 100 -> +1000 //
0b01100100, //CV_53 - PID Integral Limit negative = CV_53*(-10) Default = 100 -> -1000 //
0b00000111, //CV_54 - k_p @ x0 - High Byte (Bits 8-15) divided by 100 //
0b11010000, //CV_55 - k_p @ x0 - Low Byte (Bits 0-7) Default = 2000 -> 20 //
0b00000000, //CV_56 - k_p @ x1 - High Byte (Bits 8-15) divided by 100 //
0b11111010, //CV_57 - k_p @ x1 - Low Byte (Bits 0-7) Default = 250 -> 2.5 //
0b00000000, //CV_58 - k_p @ x2 - High Byte (Bits 8-15) divided by 100 //
0b10010110, //CV_59 - k_p @ x2 - Low Byte (Bits 0-7) Default = 150 -> 1.5 //
0b00001101, //CV_60 - x_1 shift in % ≙ CV_60/255 //
0b00001101, //CV_60 - x_1 shift in % = CV_60/255 //
// V_EMF Measurement Configuration //////////////////////////////////////////////////////////////////////////////////
0b01100100, //CV_61 - V_EMF Total amount of Measurement Iterations - Default = 100 iterations //
0b01100100, //CV_62 - V_EMF Delay before Measuring - Default = 100us //
+1 -1
View File
@@ -27,7 +27,7 @@
#define LOGLEVEL 0
#define LOG(level, ...) { if(level <= LOGLEVEL) {printf(__VA_ARGS__);}}
// Constant Value of 125 x 10⁶
// Constant Value of 125 x 10^6
#define _125M 125000000
// GPIO used for DCC-Signal, Motor PWM or ADC