more debug printfs, disabled function usage of gpio0/1, disabled usb interface to save some 25kb in the firmware image

This commit is contained in:
questor/Inter committed 2023-05-08 22:50:19 +02:00
1 parent 23b69d6823
commit 995dca15c8
4 files changed
+43 -14

No files matched your search

+10 -4
View File
@@ -364,7 +364,9 @@ void instruction_evaluation(uint8_t number_of_bytes,const uint8_t * const byte_a
if (command_byte_n == 0b00111111){
static bool prev_dir;
uint32_t speed_step = byte_array[command_byte_start_index - 1];
// LOG(1, "new speed %d", speed_step);
multicore_fifo_push_blocking(speed_step);
// LOG(1, " submitted to list\n");
// In case of a direction change, functions need to be updated because functions might depend on direction state
if (get_direction(0) != prev_dir) {
update_active_functions(0,0,true);
@@ -541,6 +543,7 @@ uint16_t measure_base_pwm(bool direction, uint8_t iterations){
for (int i = 0; i < iterations; ++i) {
uint16_t max_level = _125M/(CV_ARRAY_FLASH[8]*100+10000);
uint16_t level = max_level/20;
LOG(1, "iteration %d: maxlevel %d level %d\n", i, max_level, level);
float measurement;
do {
pwm_set_gpio_level(gpio, level);
@@ -552,11 +555,13 @@ uint16_t measure_base_pwm(bool direction, uint8_t iterations){
CV_ARRAY_FLASH[63],
direction);
// Abort measurement and write default value of 0 to flash
LOG(1, "level %d measurement %f loop-cond: %f\n", level, measurement, measurement-(float)CV_ARRAY_FLASH[171]);
if (level > max_level) {
LOG(1, "measure_base_pwm: abort measurement and return 0\n");
return 0;
}
} while((measurement - (float)CV_ARRAY_FLASH[171]) < 5.0f);
LOG(1, "level_arr[%d] = %f\n", i, level);
level_arr[i] = (float)level;
busy_wait_ms(100);
}
@@ -572,7 +577,8 @@ uint16_t measure_base_pwm(bool direction, uint8_t iterations){
// When ADC Setup is not configured run adc offset adjustment function and write adc offset into flash
void cv_setup_check(){
// Check for flash factory setting and set CV_FLASH_ARRAY to default values when factory condition ("0xFF") is found.
if ( CV_ARRAY_FLASH[64] == 0xFF ){
// if ( CV_ARRAY_FLASH[64] == 0xFF ){
if(1) {
LOG(1, "found cv[64] equals to 0xff, reseting CVs (and CV[8] = 8)\n");
uint8_t arr[4] = {125,8,7,124};
program_mode(4,arr); //reset to CV_ARRAY_DEFAULT (write CV_8 = 8)
@@ -608,8 +614,8 @@ void cv_setup_check(){
uint8_t arr1[4] = {125,base_pwm_rev_low_byte,178,124};
program_mode(4,arr1);
}
LOG(1, "int_lim_max %f\n", 10*(float)CV_ARRAY_FLASH[51]);
LOG(1, "int_lim_min %f\n", -10*(float)CV_ARRAY_FLASH[52]);
LOG(1, "int_lim_max %d\n", CV_ARRAY_FLASH[51]);
LOG(1, "int_lim_min %d\n", CV_ARRAY_FLASH[52]);
}
@@ -652,7 +658,7 @@ void init_main(){
int main() {
stdio_init_all();
LOG(0, "core0 init\n");
LOG(0, "\n\n======\ncore0 init\n");
init_main();
LOG(1, "init motor pwms\n");
init_motor_pwm(MOTOR_FWD_PIN);