some more comments

This commit is contained in:
questor/Inter committed 2023-05-27 22:04:56 +02:00
1 parent 8877e4862d
commit 36f20a8ca3
2 files changed
+8 -5

No files matched your search

+4 -2
View File
@@ -43,9 +43,11 @@ target_link_libraries(
pico_multicore
)
# enable usb output, disable uart output
# disable usb stack
pico_enable_stdio_usb(RP2040-Decoder 0)
pico_enable_stdio_uart(RP2040-Decoder 1)
# disable uart output (to enable put a 1 instead of the 0)
pico_enable_stdio_uart(RP2040-Decoder 0)
# create map/bin/hex file etc.
#pico_add_extra_outputs(RP2040-Decoder)
+4 -3
View File
@@ -23,8 +23,8 @@
// like already done (only print every 100th iteration for example!)
// - also note that with logging enabled GPIO0/1 are DISABLED from decoder functions because they are used for uart to the
// outside world (this is configure automatically for you below!)
// - IMPORTANT: you have to enable uart in the cmakelists.txt to enable logging!
#define LOGLEVEL 0
//#define LOG(level, x, ...) {if(level <= LOGLEVEL) { printf((x), ##__VA_ARGS__);}}
#define LOG(level, ...) { if(level <= LOGLEVEL) {printf(__VA_ARGS__);}}
// Constant Value of 125 x 10⁶
@@ -37,8 +37,9 @@
#define FWD_V_EMF_ADC_PIN 28u
#define REV_V_EMF_ADC_PIN 29u
// if logging is enabled do NOT use gpio0/1 for functions in the decoder
#if LOGLEVEL != 0
// GPIO used directly (GPIO 0-5 incl.) as outputs or to switch auxiliary output transistors (GPIO 24-27 incl.)
// GPIO used directly (GPIO 2-5 incl.) as outputs or to switch auxiliary output transistors (GPIO 24-27 incl.)
#define GPIO_OUTPUT_PIN_MASK (1u<<24) | (1u<<25) | (1u<<26) | (1u<<27) | (1u<<5) | (1u<<4) | (1u<<3) | (1u<<2)
#else
// GPIO used directly (GPIO 0-5 incl.) as outputs or to switch auxiliary output transistors (GPIO 24-27 incl.)
@@ -64,4 +65,4 @@ float measure(uint8_t total_iterations,
uint8_t r_side_arr_cutoff,
bool direction);
uint32_t get_32bit_CV (uint16_t CV_start_index);
uint16_t get_16bit_CV (uint16_t CV_start_index);
uint16_t get_16bit_CV (uint16_t CV_start_index);